The design of coal-based carbon membrane coupled with the electric field and its application on the treatment of malachite green (MG) aqueous solution

Carbon electrochemical membrane functionalized with flower cluster-like FeOOH catalyst for organic pollutants decontamination

Decorating active catalysts on the reactive electrochemical membrane (REM) is an effective way to further improve its decontamination performance. In this work, a novel carbon electrochemical membrane (FCM-30) was prepared through coating FeOOH nano catalyst on a low-cost coal-based carbon membrane (CM) through facile and green electrochemical deposition. Structural characterizations demonstrated that the FeOOH catalyst was successfully coated on CM, and it grew into a flower cluster-like morphology with abundant active sites when the deposition time was 30 min. The nano FeOOH flower clusters can obviously boost the hydrophilicity and electrochemical performance of FCM-30, which enhance its permeability and bisphenol A (BPA) removal efficiency during the electrochemical treatment. Effects of applied voltages, flow rates, electrolyte concentrations and water matrixes on BPA removal efficiency were investigated systematically. Under the operation condition of 2.0 V applied voltage and 2.0 mL·min^-1 flow rate, FCM-30 can achieve the high removal efficiency of 93.24% and 82.71% for BPA and chemical oxygen demand (COD) (71.01% and 54.89% for CM), respectively, with only a low energy consumption (EC) of 0.41 kWh·kgCOD^-1, which can be ascribed to the enhancement on OH yield and direct oxidation ability by the FeOOH catalyst. Moreover, this treatment system also exhibits good reusability and can be adopted on different water background as well as different pollutants.

Preparation and application of high-performance and acid-tolerant TiO2/carbon electrocatalytic membrane for organic wastewater treatment

Acidic organic wastewater with toxic and carcinogenic properties has long been a tough problem for industrial treatment. To break down the barrier of poor acidic stability as well as the high cost of materials and reactors, a novel strategy of utilizing a high-performance and acid-tolerant TiO₂/carbon electrocatalytic membrane (TiO₂/CEM) for acidic organic wastewater treatment was proposed. Study results showed that high concentrations of organic pollutants were separated and degraded by the synergistic effects of membrane separation and electrocatalytic oxidation simultaneously on the TiO₂/CEM. The great treatment performance with membrane removal efficiency of >97.4% was obtained by treating acidic rhodamine B (RhB) dye wastewater under optimized applied voltage. Treatment experiments under various pH and electrochemical tests demonstrated the outstanding acid-tolerant property and long service life of TiO₂/CEM. Furthermore, the feasibility of TiO₂/CEM for industrial application and various acidic organic wastewater treatment was proved by treating typical organic pollutants (phenol, tetracycline and oil) under high acidic circumstances.

Enhanced Removal of Malachite Green Using Calcium-Functionalized Magnetic Biochar

To efficiently remove malachite green (MG), a novel calcium-functionalized magnetic biochar (Ca/MBC) was fabricated via a two-step pyrolysis method. Iron-containing oxides endowed the target complexes with magnetic properties, especially the chemotactic binding ability with MG, and the addition of calcium significantly changed the morphology of the material and improved its adsorption performance, especially the chemotactic binding ability with MG, which could be confirmed through FTIR, XPS, and adsorption experiments. Electrostatic adsorption, ligand exchange, and hydrogen bonding acted as essential drivers for an enhanced adsorption process, and the maximum theoretical adsorption capacity was up to 12,187.57 mg/g. Ca/MBC maintained a higher adsorption capacity at pH = 4–12, and after five adsorption–desorption cycles, the adsorption capacity and adsorption rate of MG remained at 1424.2 mg/g and 71.21%, highlighting the advantages of Ca/MBC on adsorbing MG. This study suggests that biochar can be modified by a green synthesis approach to produce calcium-functionalized magnetic biochar with excellent MG removal capacity. The synthetic material can not only remove pollutants from water but also provide an efficient way for soil remediation.

Insight into performance and mechanism of tea polyphenols and ferric ions on reductive decolorization of malachite green cationic dye under moderate conditions

Dye decolorization is of crucial concern for effectively treating dye wastewater. In this study, rapid and effective decolorization of malachite green cationic dye was achieved by tea polyphenols and ferric ions under moderate conditions. Approximately 96.2% of decolorization efficiency could be obtained within the first 10 min at the initial dye concentration of 50 mg/L. The proposed method can perform excellently in a wide pH range of 5-9 and decolorization kinetics of malachite green under different solution pH were well fitted by the pseudo-second-order model. After the decolorization, only a slight reduction of tea polyphenols was observed, while the strength of peaks assigned to nitrogen-containing groups was significantly weakened, indicating that the N-demethylation reaction might occur during the decolorization process. The nucleophilic attack of deprotonated hydroxyl groups of tea polyphenols was proposed as the decolorization mechanism. The presence of ferric ions at an appropriate dosage could promote the deprotonation process and therefore enhance decolorization efficiency, while excess ferric ions in solution might compete with malachite green dye towards reductive sites on tea polyphenols. The findings from this study provided an economical and environmentally friendly technique for the effective decolorization of dye wastewater.

Optimization of Malachite Green Removal from Water by TiO₂ Nanoparticles under UV Irradiation

TiO₂ nanoparticles with surface porosity were prepared by a simple and efficient method and presented for the removal of malachite green (MG), a representative organic pollutant, from aqueous solution. Photocatalytic degradation experiments were systematically conducted to investigate the influence of TiO₂ dosage, pH value, and initial concentrations of MG. The kinetics of the reaction were monitored via UV spectroscopy and the kinetic process can be well predicted by the pseudo first-order model. The rate constants of the reaction kinetics were found to decrease as the initial MG concentration increased; increased via elevated pH value at a certain amount of TiO₂ dosage. The maximum efficiency of photocatalytic degradation was obtained when the TiO₂ dosage, pH value and initial concentrations of MG were 0.6 g/L, 8 and 10⁻⁵ mol/L (M), respectively. Results from this study provide a novel optimization and an efficient strategy for water pollutant treatment.

Adsorption removal of malachite green dye from aqueous solution

In this review, the state of the art on the removal of malachite green dye from aqueous solution using adsorption technique is presented. The objective is to critically analyze different adsorbents available for malachite green dye removal. Hence, the available recent literature in the area is categorized according to the cost, feasibility, and availability of adsorbents. An extensive survey of the adsorbents, derived from various sources such as low cost biological materials, waste material from industry, agricultural waste, polymers, clays, nanomaterials, and magnetic materials, has been carried out. The review studies on different adsorption factors, such as pH, concentration, adsorbent dose, and temperature. The fitting of the adsorption data to various models, isotherms, and kinetic regimes is also reported.