Nanoparticle/polymer-enhanced alpha olefin sulfonate solution for foam generation in the presence of oil phase at high temperature conditions

Investigation of the Stability Mechanism of Stimulus-Responsive Wormlike Micelle-CO2 Foams in the Oil Phase

Foam flooding is an important tool for reservoir development. This study aims to further investigate the interaction between stimulus-responsive wormlike micelle (WLM)-CO2 foams and crude oil. We performed micromorphology experiments as our major studies and used molecular dynamics simulations as an auxiliary tool for interfacial analysis. We utilized foam generation, liquid separation, and defoaming as the entry points of experimental research and energy as the quantitative assessment index to investigate the dynamic process of the action of different oil contents and oil phase types in a DOAPA@NaSal-H+ foam system. We also examined the role of NaSal in the generation and development of the foam system. Results indicated that the law of crude oil's effect on foam could be summarized as "low contents are beneficial and high contents are harmful." In addition, although the DOAPA@NaSal-H+ foam system has high compatibility for saturated and aromatic hydrocarbons, it is highly suitable for application in reservoir environments with relatively high asphaltene and resin contents. Through combined experimental and simulation approaches, we clarified the law governing the stability of the DOAPA@NaSal-H+ foam system in different oil-containing environments, identified the key role of NaSal, and provided a reference for the targeted application of the DOAPA@NaSal-H+ foam system in different oil reservoirs.

Recent advances in nanomaterial-stabilized pickering foam: Mechanism, classification, properties, and applications

Pickering foam is a type of foam stabilized by solid particles known as Pickering stabilizers. These solid stabilizers adsorb at the liquid-gas interface, providing superior stability to the foam. Because of its high stability, controllability, versatility, and minimal environmental impact, nanomaterial-stabilized Pickering foam has opened up new possibilities and development prospects for foam applications. This review provides an overview of the current state of development of Pickering foam stabilized by a wide range of nanomaterials, including cellulose nanomaterials, chitin nanomaterials, silica nanoparticles, protein nanoparticles, clay mineral, carbon nanotubes, calcium carbonate nanoparticles, MXene, and graphene oxide nanosheets. Particularly, the preparation and surface modification methods of various nanoparticles, the fundamental properties of nanomaterial-stabilized Pickering foam, and the synergistic effects between nanoparticles and surfactants, functional polymers, and other additives are systematically introduced. In addition, the latest progress in the application of nanomaterial-stabilized Pickering foam in the oil industry, food industry, porous functional material, and foam flotation field is highlighted. Finally, the future prospects of nanomaterial-stabilized Pickering foam in different fields, along with directions for further research and development directions, are outlined.

Production and Application of Polymer Foams Employing Supercritical Carbon Dioxide

Polymeric foams have characteristics that make them attractive for different applications. However, some foaming methods rely on chemicals that are not environmentally friendly. One of the possibilities to tackle the environmental issue is to utilize supercritical carbon dioxide ScCO2 since it is a “green” solvent, thus facilitating a sustainable method of producing foams. ScCO2 is nontoxic, chemically inert, and soluble in molten plastic. It can act as a plasticizer, decreasing the viscosity of polymers according to temperature and pressure. Most foam processes can benefit from ScCO2 since the methods rely on nucleation, growth, and expansion mechanisms. Process considerations such as pretreatment, temperature, pressure, pressure drop, and diffusion time are relevant parameters for foaming. Other variables such as additives, fillers, and chain extenders also play a role in the foaming process. This review highlights the morphology, performance, and features of the foam produced with ScCO2, considering relevant aspects of replacing or introducing a novel foam. Recent findings related to foaming assisted by ScCO2 and how processing parameters influence the foam product are addressed. In addition, we discuss possible applications where foams have significant benefits. This review shows the recent progress and possibilities of ScCO2 in processing polymer foams.

Application of Polymers for Chemical Enhanced Oil Recovery: A Review

Polymers play a significant role in enhanced oil recovery (EOR) due to their viscoelastic properties and macromolecular structure. Herein, the mechanisms of the application of polymeric materials for enhanced oil recovery are elucidated. Subsequently, the polymer types used for EOR, namely synthetic polymers and natural polymers (biopolymers), and their properties are discussed. Moreover, the numerous applications for EOR such as polymer flooding, polymer foam flooding, alkali–polymer flooding, surfactant–polymer flooding, alkali–surfactant–polymer flooding, and polymeric nanofluid flooding are appraised and evaluated. Most of the polymers exhibit pseudoplastic behavior in the presence of shear forces. The biopolymers exhibit better salt tolerance and thermal stability but are susceptible to plugging and biodegradation. As for associative synthetic polyacrylamide, several complexities are involved in unlocking its full potential. Hence, hydrolyzed polyacrylamide remains the most coveted polymer for field application of polymer floods. Finally, alkali–surfactant–polymer flooding shows good efficiency at pilot and field scales, while a recently devised polymeric nanofluid shows good potential for field application of polymer flooding for EOR.

Pickering foams and parameters influencing their characteristics

Pickering foams are available in many applications and have been continually gaining interest in the last two decades. Pickering foams are multifaceted, and their characteristics are highly dependent on many factors, such as particle size, charge, hydrophobicity and concentration as well as the charge and concentration of surfactants and salts available in the system. A literature review of these individual studies at first might seem confusing and somewhat contradictory, particularly in multi-component systems with particles and surfactants with different charges in the presence of salts. This paper provides a comprehensive overview of particle-stabilized foams, also known as Pickering foams and froths. Underlying mechanisms of foam stabilization by particles with different morphology, surface chemistry, size and type are reviewed and clarified. This paper also outlines the role of salts and different factors such as pH, temperature and gas type on Pickering foams. Further, we highlight recent developments in Pickering foams in different applications such as food, mining, oil and gas, and wastewater treatment industries, where Pickering foams are abundant. We conclude this overview by presenting important research avenues based on the gaps identified here. The focus of this review is limited to Pickering foams of surfactants with added salts and does not include studies on polymers, proteins, or other macromolecules.

Investigation of Nanoclay-Surfactant-Stabilized Foam for Improving Oil Recovery of Steam Flooding in Offshore Heavy Oil Reservoirs

This study presents a study of nanoclay-surfactant-stabilized foam to improve the oil recovery of steam flooding in offshore heavy oil reservoirs. The foam stability and thermal resistance studies were first performed to investigate the influence of nanoclay on the stability and thermal resistance properties of the foam system. Then, the sandpack flooding tests were conducted for investigating the resistance factor and displacement abilities by nanoclay-surfactant-stabilized foam. The results showed that the nanoclay-surfactant-stabilized foam has excellent foaming ability and foam stability at 300 °C, which can be used in steam flooding for offshore heavy oil reservoirs. The resistance factor is greater than 30 at 300 °C when the gas-liquid ratio ranges from 1 to 3, which indicated that the nanoclay-surfactant-stabilized foam has good performance of thermal resistance and plugging effect. The heterogeneous sandpack flooding test showed that the nanoclay-surfactant-stabilized foam can effectively divert the steam into the low-permeability area and improve the sweep efficiency, thus improving heavy oil recovery of steam flooding. Therefore, the nanoclay-surfactant-stabilized foam flooding has a great potential for improving oil recovery of steam flooding in offshore heavy oil reservoirs.

Progress of polymer gels for conformance control in oilfield

For the past decades, long-term water flooding processes have led to water channeling in mature reservoirs, which is a severe problem in oilfields. The development of better plugging ability and cost-effective polymer gel is a key aspect for the control of excess water production. Research on polymer gel applicable in a heterogeneous reservoir to plug high permeable channels has been growing significantly as revealed by numerous published scientific papers. This review intends to discuss the polymer gel techniques from innovations to applications. The related difficulties and future prospects of polymer gels are also covered. Developments of polymer gels to resist temperature, early gel formation, synergistic mechanisms and influence of pH, high salinity are systematically emphasized. The review provides a basis to develop polymer gels for future applications in oilfields to meet harsh reservoir conditions. It will assist the researchers to further develop polymer gels to improve the oil recovery from mature reservoirs under economic conditions to meet the requirements of future oilfields.

Experimental Study on the Effect of Polymer Injection Timing on Oil Displacement in Porous Media

It has been proven that polymer injection at early times is beneficial to offshore heavy oil recovery. It is of significant importance to optimize the polymer injection timing and decide the residual oil distribution after polymer flooding. Aiming at a specific offshore heavy oil reservoir in Bohai, China, the optimum polymer injection timing is investigated through laboratory experiments. The influence of polymer injection timing on oil displacement and remaining oil distribution is analyzed by combining macroscopic and microscopic flooding experiments. The results reveal that the optimum polymer injection timing should be close to the water breakthrough, i.e., just before the waterflooding front reaches the outlet of the core. In addition, the waterflooding front position is analytically solved by using the Buckley–Leverett method and verified by experimental results, which supply an approach to predict the polymer injection timing. When polymer is injected before the waterflood front reaches the outlet of the core, the mobility control ability of polymer solution can reduce the fraction of bypassed volume of the reservoir by waterflooding. The early injected polymer mainly enters the high permeability zone, which works positively in two ways. Firstly, it improves the oil displacement efficiency of the high permeability zone. Secondly, the polymer establishes a flow resistance in the high permeable zones, thus improving the sweep efficiency in the low and medium permeability zones. However, our residual oil distribution experiments illustrate that there is still a large amount of oil remaining in the low and medium permeability zones. Therefore, it is necessary to explore additional EOR methods to recover the abundant residual oil.