Simultaneous removal process of divalent metal and anionic and cationic dyes by layered reconstruction with hydrocalumite intercalated with dodecyl sulfate

High-performance hydrophobic magnetic hydrotalcite for selective treatment of oily wastewater

Oil emulsified in water is one of the most difficult mixtures to treat due to the good stability of emulsions, so there is a growing demand for more efficient methods for separating immiscible oil/water mixtures. In this context, the focus of this study was to obtain an adsorbent for the selective treatment of a simulated oily wastewater. To this aim, a modified hydrotalcite sample with hydrophobic and magnetic characteristics was prepared and characterized. Initially, the effect of sodium dodecyl sulfate (SDS) amount on the adsorbent characteristics was evaluated (266-800 mg_SDS g^-1_LDH). The hydrophobic hydrotalcite (LDH-SDS) containing 533 mg_SDS g^-1_LDH (LDH-SDS2) presented a higher interlayer space where the surfactant molecules were arranged perpendicular to the lamellae, allowing better access to the hydrotalcite pores and facilitating the selective adsorption of oil compounds. Moreover, the synergistic association of hydrophobic properties with super-wetting and effective adhesion oil to Fe₃O₄ favoured the selective adsorption of the simulated oily wastewater onto the hydrophobic and magnetic hydrotalcite (LDH-MSDS), facilitating the post-treatment separation. The kinetic analysis demonstrated that the adsorption equilibrium was attained in 120 min and the pseudo-second order model was the most suitable for predicting the removal of total organic carbon (TOC) from the simulated oily wastewater. The Langmuir model described very well the equilibrium experimental data, with a maximum adsorption capacity for TOC removal using LDH-MSDS of 659.9 mg g^-1. Therefore, the modified hydrotalcite prepared in this study showed intrinsic characteristics that make it a promising adsorbent for the selective treatment of oily wastewaters.

Removal of protein wastes by cylinder-shaped NaY zeolite adsorbents decorated with heavy metal wastes

Cylinder-shaped NaY zeolite was used as an adsorbent for eradicating both heavy metal ions (Cu²⁺, Zn²⁺, Ni²⁺, and Co²⁺) and proteins from the waste streams. As a pseudo-metal ion affinity adsorbent, NaY zeolite was used in the capture of heavy metal ions in the first stage. The amount (molar basis) of metal ions adsorbed onto NaY zeolite decreased in the order of Cu²⁺ > Zn²⁺ > Co²⁺ > Ni²⁺. Bovine serum albumin (BSA) was utilized as a model of proteins used in the waste adsorption process by NaY zeolite. The adsorption capacities of NaY zeolite and Cu/NaY zeolite for BSA were 14.90 mg BSA/g zeolite and 84.61 mg BSA/g zeolite, respectively. Moreover, Cu/NaY zeolite was highly stable in the solutions made of 2 M NaCl, 500 mM imidazole or 125 mM EDTA solutions. These conditions indicated that the minimal probability of secondary contamination caused by metal ions and soluble proteins in the waste stream. This study demonstrates the potential of Cu/NaY zeolite complex as an efficient pseudo-metal chelate adsorbent that could remove metal ions and water-soluble proteins from wastewater concurrently.