Conversion from a natural mineral to a novel effective adsorbent: Utilization of pumice grafted with polymer brush for methylene blue decolorization from aqueous environments

Decolorization and detoxification of Brilliant Crocein GR by a newly enriched thermophilic consortium

The environmental pollution caused by azo dyes at high temperatures has become an urgent problem. However, little attention has been paid to decolorizing azo dyes by thermophilic consortiums. In this study, a thermophilic bacterial consortium (BCGR-T) mainly composed of two genera, namely, Caldibacillus (70.90%) and Aeribacillus (17.63%) was first enriched, which can decolorize Brilliant Crocein GR (BCGR) at high temperatures (50-75 °C), pH values of 6∼8, dye concentrations (100-400 mg/L) and salinities (1-5%, w/v). The enzyme activity results showed that the azoreductase activity was nearly 8.8 times that of the control (p < 0.01), and the intracellular lignin peroxidase was also highly expressed with enzyme activity of 5.64 U (min-1 mg-1 protein) (p < 0.05), indicated that both azoreductase and intracellular lignin peroxidase played an important part in the decolorization process. Furthermore, seven new intermediate metabolic products, including aniline, phthalic acid, 2-carboxy benzaldehyde, phenylacetic acid, benzoic acid, toluene, and 4-methyl-hexanoic acid, were identified. In addition, functional genes related with the azo dye decolorization, such as those encoding the azoreductase, laccase, FMN reductase, NADPH-/NADH-quinone oxidoreductases and NADPH-/NADH dehydrogenases, catechol dioxygenase, homogentisate 1,2-dioxygenase, protocatechuate 3,4-dioxygenase, gentisate 1,2-dioxygenase, azobenzene reductase, naphthalene 1,2-dioxygenase, benzoate/toluate 1,2-dioxygenase, and anthranilate 1,2-dioxygenase and so on were found in the metagenome of the consortium BCGR-T. Finally, a new decolorization pathway of the thermophilic consortium BCGR-T was proposed. In addition, the phototoxicity of BCGR decreased after decolorization. Overall, the thermophilic consortium BCGR-T could be a promising candidate in the treatment of high concentration azo dye wastewater at high temperatures.

Exploring the mechanism of enhanced Cr(VI) removal by Lysinibacillus cavernae microcapsules loaded with synthetic nano-hydroxyapatite

In this study, nano-scale hydroxyapatite (HAP) powder was successfully synthesized from waste eggshells and combined with Lysinibacillus cavernae CR-2 to form bio-microcapsules, which facilitated the enhanced removal of Cr(VI) from wastewater. The effects of various parameters, such as bio-microcapsule dosage, HAP dosage, and initial Cr(VI) concentration on Cr(VI) removal, were investigated. Under different treatment conditions, the Cr(VI) removal followed the order of LC@HAP (90.95%) > LC (78.15%) > Free-LC (75.61%) > HAP (6.56%) > NM (0.23%) at the Cr(VI) initial concentration of 50 mg L-1. Relative to other reaction systems, the LC@HAP treatment exhibited a considerable decrease in total Cr content in the solution, with removal rates surpassing 70%. Additionally, the bio-microcapsules maintained significant biological activity after reacting with Cr(VI). Further characterization using SEM, FTIR, XPS, and XRD revealed that the Cr(VI) removal mechanisms by bio-microcapsules primarily involved biological reduction and HAP adsorption. The adsorption of Cr(III) by HAP predominantly occurred through electrostatic interactions and surface complexation, accompanied by an ion exchange process between Cr(III) and Ca(II). Hence, bio-microcapsules, created by combining L. cavernae with HAP, represent a promising emerging material for the enhanced removal of Cr(VI) pollutants from wastewater.

Decolorization of reactive azo dye using novel halotolerant yeast consortium HYC and proposed degradation pathway

The presence of high salinity levels in textile wastewater poses a significant obstacle to the process of decolorizing azo dyes. The present study involved the construction of a yeast consortium HYC, which is halotolerant and was recently isolated from wood-feeding termites. The consortium HYC was mainly comprised of Sterigmatomyces halophilus SSA-1575 and Meyerozyma guilliermondii SSA-1547. The developed consortium demonstrated a decolourization efficiency of 96.1% when exposed to a concentration of 50 mg/l of Reactive Black 5 (RB5). The HYC consortium significantly decolorized RB5 up to concentrations of 400 mg/l and in the presence of NaCl up to 50 g/l. The effects of physicochemical factors and the degradation pathway were systematically investigated. The optimal pH, salinity, temperature, and initial dye concentration were 7.0, 3%, 35 °C and 50 mg/l, respectively. The co-carbon source was found to be essential, and the addition of glucose resulted in a 93% decolorization of 50 mg/l RB5. The enzymatic activity of various oxido-reductases was assessed, revealing that NADH-DCIP reductase and azo reductase exhibited greater activity in comparison to other enzymes. UV-Visible (UV-vis) spectrophotometry, Fourier-transform infrared spectroscopy (FTIR), high-performance liquid chromatography (HPLC), and gas chromatography-mass spectrometry (GC-MS) were utilized to identify the metabolites generated during the degradation of RB5. Subsequently, a metabolic pathway was proposed. The confirmation of degradation was established through alterations in the functional groups and modifications in molecular weight. The findings indicate that this halotolerant yeast consortium exhibits promising potential of degrading dye compounds. The results of this study offer significant theoretical basis and crucial perspectives for the implementation of halotolerant yeast consortia in the bioremediation of textile and hypersaline wastewater. This approach is particularly noteworthy as it does not produce aromatic amines.

Dual-functional marine algal carbon-based materials with highly efficient dye removal and disinfection control

The design and simple, green preparation of dual-functional materials for the decontamination of both hazardous dyes and pathogenic microorganisms from wastewater remain challenging currently. Herein, a promising marine algal carbon-based material (named C-SA/SP) with both highly efficient dye adsorptive and antibacterial properties was fabricated based on the incorporation of sodium alginate and a low dose of silver phosphate via a facile and eco-friendly approach. The structure, removal of malachite green (MG) and congo red (CR), and their antibacterial performance were studied, and the adsorption mechanism was further interpreted by the statistical physics models, besides the classic models. The results show that the maximum simulated adsorption capacity for MG reached 2798.27 mg/g, and its minimal inhibit concentration for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was 0.4 mg/mL and 0.2 mg/mL, respectively. The mechanistic study suggests that silver phosphate exerted the effects of catalytic carbon formation and pore formation, while reducing the electronegativity of the material as well, thus improving its dye adsorptive performance. Moreover, the MG adsorption onto C-SA/SP showed vertical orientation and a multi-molecular way, and its adsorption sites were involved in the adsorption process with the increase of temperature. Overall, the study indicates that the as-made dual-functional materials have good applied prospects for water remediation.

A novel combination of immobilized Enterococcus casseliflavus sp. nov. with silver nanoparticles into a reusable matrix of Ca-Alg beads as a new strategy for biotreatment of Disperse Blue 183: Insights into metabolic characterization, biotoxicity, and mutagenic properties

Recent advances in immobilized biologic systems for decolorizing azo dyes are gaining great attention due to microorganisms like bacteria and nanoparticles that could stimulate decolorization. Enhanced decolorization performance was observed in this study, indicating the great potential of the immobilized complex of bacterial cells and AgNPs as an alternative to the traditional biological processes to improve the performance of biological systems. The biodegradation and decolorization of Disperse Blue183 (DB 183) were investigated utilizing a novel combination of Enterococcus casseliflavus strain A₂ mediated by silver nanoparticles synthesized by Marinospirillum alkaliphilum strain N in three different conditions. Ⅰ: free bacterial strain A₂ (100% dye removal in 72 h), Ⅱ: immobilized bacterial strain A₂ in Ca-Alg beads (100% dye removal in 15 h), and Ⅲ: immobilized bacterial strain A₂ with silver nanoparticles (AgNPs) as support in Ca-Alg beads (100% dye removal in 9 h). The presence of bacterial cells and nanoparticles in Ca-Alg beads was assessed and proved by scanning electron microscope (SEM) and X-ray energy diffraction (EDX) analysis. Moreover, DB 183 and its decolorization metabolites were evaluated by applying UV-Vis, infrared spectroscopy (FTIR), and GC/MS, and the results showed that the dye was degraded. The antimicrobial effect, brine shrimp toxicity (BST) test, and mutagenicity assay in the presence and absence of metabolic activation (+S9/-S9) were run to assess DB 183 and metabolite obtained from biodegradation. The antimicrobial activity of DB 183 disappeared after treatment. Further, the results of the BST test determined that the dye has moderate biotoxicity (LC₅₀:0.064 mg/mL), and the after-treatment product was not toxic. According to the Ames test, DB 183 had mutagenicity effect (69-84%), and the metabolic activation increased the mutagenicity of the dye) 12-25%). However, the percentage mutagenicity of decolorization products decreased, ranging from 50 to 80% without activation (-S9) and 83-96% in present activation (+S9). This work used the immobilized bacterial cells and AgNPs Ca-Alg gel beads for the first time to introduce this kind of system as a suitable technique for rapid decolorization. Using this application enables a remarkable reduction in the time dedicated to the bioremediation of dyeing wastewater.

Decolorization of Rhodamine B by silver nanoparticle-loaded magnetic sporopollenin: characterization and process optimization

Silver nanoparticles (Ag NPs) were reduced on the surface of magnetic sporopollenin (Fe₃O₄@SP) modified with poly-dopamine to enhance the degradation capability for Rhodamine B (RhB). The polydopamine-coated Fe₃O₄@SP (PDA@ Fe₃O₄@SP) acts as a self-reducing agent for Ag⁺ ions to Ag⁰. The structural properties of the synthesized nanocomposite were determined using Fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), and vibrating sample magnetometer (VSM). The systematic study of the degradation process was performed using Response Surface Methodology (RSM) to determine the relationship between the four process variables, namely, initial RhB concentration, NaBH₄ amount, catalyst amount, and time. Optimum points were determined for these four parameters using both matrix and numerical optimization methods. Under optimum conditions, RhB was decolorized with a yield of 98.11%. The apparent activation energy (E_a) and rate constant (k) for the degradation were 24.13 kJ/mol and 0.77 min^-1, respectively. The reusability studies of the Ag@PDA@Fe₃O₄@SP exhibited more than 85% degradation ability of the dye even after five cycles. As a result, Ag@PDA@Fe₃O₄@SP possessed high catalytic activity, fast reduction rate, good reusability, easy separation, and simple preparation, endowing this catalyst to be used as a promising catalyst for the decolorization of dyes in aqueous solutions.

Removal of Dye (Methylene Blue) from Wastewater Using Bio-Char Derived from Agricultural Residues in Palestine: Performance and Isotherm Analysis

The main aim of this study was to perform a parametric study for treating a model dye containing wastewater (i.e., methylene blue, MB) using locally available biomass wastes in Palestine as the adsorbent. Eight different types of biomasses were investigated in batch adsorption tests, including coffee grains, almond shells, pistachio shells, date pits, jute sticks, sunflower shells, peanut shells, and grapevine sticks. The experiments were conducted on three different phases of processing for these materials: as natural adsorbents, biochar, and activated carbon. The biochar was prepared by pyrolysis, while ZnCl2 was used to chemically activate the materials for obtaining activated carbon. The influences of pH, initial MB concentration, and adsorbent dosage on the adsorption capacity and kinetics were investigated for activated carbon obtained from sunflower shells. The results indicate that the adsorption efficiency of natural adsorbents and biochar is highly dependent on the biomass type. As a natural adsorbent, peanut hulls demonstrated the maximum efficiency (>95%) for removing MB, whereas date pits showed the lowest efficiency (20%). In terms of biochar, jute sticks provide the highest removal efficiency. After activation with ZnCl2, a considerable increase in their adsorption efficiency (>95%) was obtained for most of the adsorbents, with sunflower shells being the most efficient adsorbent. The results confirm the technical feasibility of the adsorption technology to treat dye containing wastewater using locally available biomass wastes.

Characterization and adsorption applications of composite biochars of clay minerals and biomass

Composite mineral-biochars of a homogeneous biomass (cellulose) and heterogeneous biomass (oak leaves) were fabricated with either 5 wt% or 10 wt% minerals (montmorillonite (MMT), kaolinite, and sand) and then pyrolyzed at 600 °C for 60 min. Characterizations including proximate analysis, ultimate analysis, surface area and porosity, morphology, and surface chemistry confirmed that minerals were present on the surface of biochar, and MMT/kaolinite-biochar composites showed a strengthening in the chars' aromatic structures, as well as increases in oxygen-containing surface functional groups. Methylene blue adsorption isotherms indicated that the MMT/kaolinite-biochars had higher adsorption capacities than pure biomass or biomass-sand biochars (110 mg_MB/g_char and 24 mg_MB/g_char for MMT-cellulose char and cellulose char, respectively). A multilinear model relating adsorption capacity and adsorbent properties was developed to measure the relative contribution of biochar properties to adsorption behavior. The model indicates that pore volume and hydrogen bonding were the dominant properties in controlling the adsorption of methylene blue onto the biochars. Findings from this work indicate that composite biochars prepared from biomass and inexpensive clay minerals are a promising adsorbent for remediating organic contaminants from water.

Assessment of Naturally Sourced Mineral Clays for the 3D Printing of Biopolymer-Based Nanocomposite Inks

The present study investigated the possibility of obtaining 3D printed composite constructs using biomaterial-based nanocomposite inks. The biopolymeric matrix consisted of methacrylated gelatin (GelMA). Several types of nanoclay were added as the inorganic component. Our aim was to investigate the influence of clay type on the rheological behavior of ink formulations and to determine the morphological and structural properties of the resulting crosslinked hydrogel-based nanomaterials. Moreover, through the inclusion of nanoclays, our goal was to improve the printability and shape fidelity of nanocomposite scaffolds. The viscosity of all ink formulations was greater in the presence of inorganic nanoparticles as shear thinning occurred with increased shear rate. Hydrogel nanocomposites presented predominantly elastic rather than viscous behavior as the materials were crosslinked which led to improved mechanical properties. The inclusion of nanoclays in the biopolymeric matrix limited hydrogel swelling due the physical barrier effect but also because of the supplementary crosslinks induced by the clay layers. The distribution of inorganic filler within the GelMA-based hydrogels led to higher porosities as a consequence of their interaction with the biopolymeric ink. The present study could be useful for the development of soft nanomaterials foreseen for the additive manufacturing of customized implants for tissue engineering.

Heavy metals biosorption mechanism of partially delignified products derived from mango (Mangifera indica) and guava (Psidium guiag) barks

This paper evaluates the biosorption of toxic metal ions onto the bioadsorbents derived from mango (Mangifera indica) and guava (Psidium guiag) barks and their metal fixation mechanisms. Maximum metal biosorption capacities of the mango bioadsorbent were found in the following increasing order (mg/g): Hg (16.24) < Cu (22.24) < Cd (25.86) < Pb (60.85). Maximum metal biosorption capacities of guava bioadsorbent follow similar order (mg/g): Hg (21.48) < Cu (30.36) < Cd (32.54) < Pb (70.25), but with slightly higher adsorption capacities. The removal mechanisms of heavy metals using bioadsorbents have been ascertained by studying their surface properties and functional groups using various spectrometric, spectroscopic, and microscopic methods. Whewellite (C2CaO4·H2O) has been identified in bioadsorbents based on the characterization of their surface properties using X-ray techniques (XPS and XRD), facilitating the ion exchange of metal ions with Ca2+ bonded with carboxylate moieties. For both the bioadsorbents, the Pb2+, Cu2+, and Cd2+ are biosorbed completely by ion exchange with Ca2+ (89-94%) and Mg2+ (7-12%), whereas Hg2+ is biosorbed partially (57-66%) by ion exchange with Ca2+ (38-42%) and Mg2+ (19-24%) due to involvement of other cations in the ion exchange processes. Bioadsorbents contain lignin which act as electron donor and reduced Cr(VI) into Cr(III) (29.87 and 37.25 mg/g) in acidic medium. Anionic Cr(VI) was not adsorbed onto bioadsorbents at higher pH due to their electrostatic repulsion with negatively charged carboxylic functional groups.

Enhanced Cr(VI) removal from water using a green synthesized nanocrystalline chlorapatite: Physicochemical interpretations and fixed-bed column mathematical model study

Apatite-based minerals have attracted much attention in the remediation of heavy metal-contaminated environment. However, exploring apatite with efficient adsorption performance for inorganic oxyanions such as Cr(VI) remains a challenge. Herein, a novel nanocrystalline chlorapatite (ClAP) was promptly prepared by a green method using eggshell wastes as calcium source with the purpose to enhance Cr(VI) adsorption capability. The generated ClAP was characterized by XRD, SEM-EPMA, TEM, FTIR, and BET analyses. Batch and column experiments were subsequently carried out to explore the influencing factors, adsorption capacity and removal mechanism. Results showed that ClAP exhibited excellent stability and adsorption performance for Cr(VI) (63.47 mg g^-1), which was much greater than that of hydroxyapatite and most reported materials. The adsorption process was fitted well by the pseudo-second-order model and the Langmuir model. In fixed bed column experiments, a novel time-fractional derivative model exhibited much better suitability in interpreting the observed breakthrough curves of Cr(VI) than traditional models. Furthermore, the reusability of ClAP in column was evaluated. Results showed that the adsorption capacity maintained well after consecutively reused for five cycles. Studies of the effect of pH, as well as FTIR and XPS investigations indicated that Cr(VI) adsorption was mainly ascribed to electrostatic interactions and surface complexation, while the reduction of Cr(VI) to the low-toxicity Cr(III) also existed in the adsorption process. The ClAP adsorbent was also successfully used for Cr(VI) remediation from real wastewater. Hence, nanocrystalline ClAP can be a promising material for enhancing the elimination of oxyanion contaminants such as Cr(VI) from water.

Decolorization and detoxification of azo dye by halo-alkaliphilic bacterial consortium: Systematic investigations of performance, pathway and metagenome

The high pH and salinity of textile wastewater is a major hindrance to azo dye decolorization. In this study, a mixed bacterial consortium ZW1 was enriched under saline (10% salinity) and alkaline (pH 10.0) conditions to decolorize Methanil Yellow G (MY-G). Consortium ZW1 was mainly composed of Halomonas (49.8%), Marinobacter (30.7%) and Clostridiisalibacter (19.2%). The effects of physicochemical factors were systematically investigated, along with the degradation pathway and metagenome analysis. The co-carbon source was found to be necessary, and the addition of yeast extract led to 93.3% decolorization of 100 mg/L MY-G within 16 h (compared with 1.12% for control). The optimum pH, salinity, temperature and initial dye concentration were 8.0, 5-10%, 40 °C and 100 mg/L, respectively. The typical dye-related degradation enzymes were most effective at 10% salinity. Consortium ZW1 was also able to differentially decolorize five other direct and acidic dyes in a short period. Phototoxicity tests revealed the detoxification of MY-G degradation products. Combining UV-vis, FTIR and GC-MS detection, the MY-G degradation pathway by consortium ZW1 was proposed. Furthermore, metagenomic approach was used to elucidate the functional potential of genes in MY-G biodegradation. These results signify the broad potential application of halo-alkaliphilic consortia in the bioremediation of dyeing wastewater.

Adsorptive removal of trace thallium(I) from wastewater: A review and new perspectives

Thallium is an emerging pollutant reported in wastewater along with the increasing mining and smelting of thallium-containing ores in recent years. The complete removal of Tl(I) from wastewater is of significant emergency due to its high toxicity and mobility, however, Tl(I) removal is always confronted with numerous technical difficulties because of the extremely low Tl(I) concentration in wastewater and the disturbances of many accompanying impurity ions. Adsorption is currently the most widely used method for Tl(I) removal on industrial scale and varied kinds of adsorbents such as Prussian blue analogues, biosorbents, and metal oxides have been developed. However, the adsorption process of Tl(I) is always affected by the co-existing cations, resulting in low Tl(I) removal efficiency. Recently, the development of a variety of novel adsorbents or ion sensors based on macrocyclic compounds for enrichment and accurate determination of trace Tl(I) in aqueous solutions exhibits great potential for application in Tl(I) removal from wastewater with high selectivity and process efficiency. This paper provides an overview of the adsorption methods for Tl(I) removal from wastewater with emphasis on complexation properties between varied types of adsorbents and Tl(I). Future directions of research and development of adsorptive Tl(I) removal from industrial wastewater are proposed.