A simple cation exchange model to assess the competitive adsorption between the herbicide paraquat and the biocide benzalkonium chloride on montmorillonite

Kinetic study of paraquat adsorption on alginate beads loaded with montmorillonite using shrinking core model

Water contamination by pesticides threatens clean water availability, highlighting the need for advanced sustainable sanitation systems. Adsorption using biopolymers and minerals is prominent. Understanding process kinetics and influencing parameters is crucial for optimizing contaminant-adsorbent contact time for safe water disposal. The adsorption kinetics of Paraquat (PQ) at three initial concentrations (C0 = 19, 38, and 50 ppm) were studied using alginate-montmorillonite (Alg-Mt) beads with varying clay contents and a 30-min gelation time. The beads were characterized by elemental analysis, TG/DTG, FTIR, XRD, SEM, and EDX. The Shrinking Core Model (SCM) was applied to the experimental data to determine if the diffusion of PQ within the beads depended on clay content. The effective diffusion coefficient (Dp) in the adsorbent increased from 7 × 10-12 to 1 × 10-10 m2 s-1 with increasing clay content, suggesting that diffusion into the interior depended on interaction with the mineral. This investigation also demonstrated that the synthesis of beads at different gelation times does not impact either the adsorption capacity or the adsorption rate of the herbicide on the materials. These results indicate that diffusion depends solely on the interaction of the cationic herbicide with the clay encapsulated within the bead hydrogel.

Some Unmodified Household Adsorbents for the Adsorption of Benzalkonium Chloride-A Kinetic and Thermodynamic Case Study for Commercially Available Paper

The extensive use of biocide surfactant benzalkonium chloride (BAC) during the SARS-CoV-2 pandemic has led to the buildup of this hazardous chemical in waste, surface and groundwater. e The study aims to elucidate whether various low-cost household materials are suitable, in their unmodified and untreated form, to effectively adsorb BAC from its aqueous solutions.. Additionally, if a proper adsorbent is identified, a description of the kinetics and thermodynamics of the process is also targeted. From among the five tested materials, a commercially available white household paper towel was chosen to best satisfy the criteria of low price, large availability, and standardization degree, as well as high adsorption capacity within a fairly short time window needed until equilibrium. Batch experiments were carried out with a commercial mixture of BAC-12 and BAC-14 within a temperature range of 18-45 degrees Celsius, and a 25-100 mg/g BAC/adsorbent initial mass ratio range, respectively. The overall process follows a pseudo-second-order kinetic law, with an apparent activation energy of 73.35 KJ/mole. Both the Langmuir and the Redlich-Peterson isotherms describe the equilibrium data at 298 K well, with a Gibbs free energy of -20.64 KJ/mole. These findings are in agreement with previous reports and suggest a hybrid but chemisorption-dominated process.

Adsorption of cationic surfactant as a probe of the montmorillonite surface reactivity in the alginate hydrogel composites

Adsorption of a cationic surfactant allowed to probe the surface reactivity of montmorillonite encapsulated in a composite of alginate hydrogels (A-MMT). Dodecylbenzyldimethylammonium chloride (BAC-12) was the surfactant used for these studies. BAC-12 is part of the widely used surfactant mixture known as benzalkonium chloride. XRD showed that up to three different types of basal spacing (d 001) were present within the composite indicating that as the concentration of adsorbed BAC-12 increases, populations with different adsorption conformational arrangements are present, even unexpanded clay remains. From the SEM-EDS spectra it is observed that the clay is distributed in the whole composite. In addition, the effect of the presence of cationic and anionic biocides on BAC-12 adsorption was studied. Cationic biocides such as tetradecyllbenzyldimethylammonium chlorides (BAC-14) and paraquat (PQ) show a competitive behavior for the clay adsorption sites at BAC-12 low concentration indicating an electrostatic adsorption mechanism. However, the presence of anionic contaminants such as 2,4-D and metsulfuron methyl do not affect surfactant adsorption. In all scenarios is observed an abrupt increase of BAC-12 adsorbed amount reaching values higher than the clay CEC suggesting strong tail-tail interactions. This occurs at concentrations 10 times lower than the CMC of BAC-12 promoted by clay encapsulation in the composite. In these composites the alginate does not affect the surface reactivity of the clay, but the formation of the hydrogel allows it to be easily extracted from aqueous media which makes it an interesting material with a potential use in water remediation.

Batch and Column Adsorption of Phosphorus by Modified Montmorillonite

Phosphorus pollutants are a crucial component of water eutrophication. In this study, montmorillonite modified by Keggin Al13 and hexadecyltrimethyl ammonium (Al13-O-MMt) was used as an adsorbent to remove phosphorus from solutions and thus simulate the practice of a field trial, such as in wastewater. The ammonium molybdate spectrophotometric method was used to determine the concentrations of phosphorus in samples. In the batch experiment, phosphorus was adsorbed by original montmorillonite (MMt) and Al13-O-MMt at various pH values (6–9) to identify the effect of pH during the adsorption process. The batch adsorption results demonstrate that Al13-O-MMt can adsorb up to 93% of phosphorus at pH = 8. Six graduated amounts (0.01–0.25 g) of montmorillonite were tested at three different temperatures to determine the most suitable temperature and the minimum dosage of Al13-O-MMt needed for the adsorption of 200 mg/L phosphorus in a 30 mL solution, which was 0.1 g at 25 °C. Therefore, the adsorption capacity of Al13-O-MMt was found to be 60 mg/g. Subsequently, a column experiment was conducted. The results showed that the optimized dosage of Al13-O-MMt was 6.667 g for phosphorus adsorption with a concentration of 200 mg/L in 2000 mL solution, and the breakthrough time was 4794.67 min.

Two-step pyrolysis biochar derived from agro-waste for antibiotics removal: Mechanisms and stability

This study used acetone washing biochar (BCA) and nitric-acid washing biochar (BCN) derived from bagasse to remove sulfamethoxazole (SMX) and tetracycline (TC) in water. Higher specific surface area (1119.53 m² g^-1) and graphitization degree can significantly improve decontamination efficacy, of which BCN has the highest SMX and TC sorption capacities (274.63 mg g^-1 and 353.85 mg g^-1). The kinetics, isotherms and characterization analysis indicated O-containing functional group complexation and π-π interaction were dominant mechanisms in the adsorption process. Adsorption stability experiment showed that BCA has better stability with the coexistence of anions and cations. Besides, the enhancement and competitive adsorption from the interaction between soluble organic matter and TC could facilitate TC decontamination. Therefore, bagasse biochar derived from agro-waste has a promising potential for antibiotic contaminants removal from multi-interference conditions and promotes the recycling of waste, thereby achieving harmony between materials and the ecological environment.

Experimental design for the optimization of paraquat removal from aqueous media using a fixed-bed column packed with Pinus Eldarica stalks activated carbon

In this study, a fixed-bed column packed with an activated carbon (Pinus eldarica stalks (PES-AC)) was used to evaluate the performance of paraquat removal from wastewater. The effect of bed height, initial paraquat concentration, contact time, flow rate on the removal of paraquat was investigated using response surface methodology (RSM) based on central composite design (CCD). From the RSM model, the optimum experimental conditions to achieve 94.65% removal of paraquat were solution pH of 8.0, 6 mg L^-1 of paraquat, 4 mL min^-1 of flow rate, 0.8 cm of the bed height, and 40 min of contact time. The breakthrough data were significantly fitted with Thomas, bed depth services time (BDST), and Yoon-Nelson models. The high values of N_BD (14.33, 32.29, and 54.46 mg L^-1) and critical bed depth (0.396, 0.370, and 0.330 cm) obtained from BDST model revealed the high efficiency and suitability of the adsorbent. Adsorption of paraquat on PES-AC was strongly dependent on solution pH, indicating an electrostatic attraction mechanism.

Adsorption of Paraquat by Poly(Vinyl Alcohol)-Cyclodextrin Nanosponges

The contamination of hydrosoluble pesticides in water could generate a serious problem for biotic and abiotic components. The removal of a hazardous agrochemical (paraquat) from water was achieved by adsorption processes using poly(vinyl alcohol)-cyclodextrin nanosponges, which were prepared with various formulations via the crosslinking between citric acid and β-cyclodextrin in the presence of poly(vinyl alcohol). The physicochemical properties of nanosponges were also characterized by different techniques, such as gravimetry, thermogravimetry, microscopy (SEM and Stereo), spectroscopy (UV-visible, NMR, ATR-FTIR, and Raman), acid-base titration, BET surface area analysis, X-ray diffraction, and ion exchange capacity. The C10D-P2 nanosponges displayed 60.2% yield, 3.14 mmol/g COOH groups, 0.335 mmol/g β-CD content, 96.4% swelling, 94.5% paraquat removal, 0.1766 m2 g-1 specific surface area, and 5.2 × 10-4 cm3 g-1 pore volume. The presence of particular peaks referring to specific functional groups on spectroscopic spectra confirmed the successful polycondensation on the reticulated nanosponges. The pseudo second-order model (with R2 = 0.9998) and Langmuir isotherm (with R2 = 0.9979) was suitable for kinetics and isotherm using 180 min of contact time and a pH of 6.5. The maximum adsorption capacity was calculated at 112.2 mg/g. Finally, the recyclability of these nanosponges was 90.3% of paraquat removal after five regeneration times.