Comparison of the interaction between propranolol hydrochloride (PPL) with anionic surfactant and cationic surface active ionic liquid in micellar phase

Drug Extended-Release System Utilizing Micelle Formation of Highly Water-Soluble Drugs and a Counter Polymer

The objective of this study is to clarify the mechanism of extending release of highly water-soluble drugs via counter polymer (CP) utilization in poly(ethylene oxide) (PEO)/polyethylene glycol (PEG) matrix tablets. Carbomer, poly(acrylic acid), was used as a CP, which has the opposite charges to the drugs. The in vitro release of several highly water-soluble drugs from PEO/PEG tablet with or without CP were tested, the relationship between the sustained release effect by a CP (SRE) and the physicochemical properties of the drugs was investigated. The results demonstrated that the utilization of CP can extend the release of some highly water-soluble drugs by effectively controlling the drug diffusion through matrices. On the other hand, the effectiveness of CP was different depending on the drugs applied. There were not statistical correlations between SRE and physicochemical properties such as solubility, molecular weight, and charge intensity of the drugs, while a micelle forming property of the drugs played an important role in SRE by CP. It was concluded that CP, Carbomer, having negative charges could effectively interact with opposite charges on the surface of stable drug micelles, which could result in a significant decrease in drug diffusion leading to extended drug release. It is considered that the system utilizing CP is a promising approach to achieve extended release of highly water-soluble drugs with a reasonable tablet size, especially in the case of large drug loading.

The correlation between the micelle morphology of surface-active ionic liquids with self-assembly and thermodynamic characteristics: coarse-grained MD simulation and experiment

Surface-active ionic liquids (SAILs) show great promise as novel green solvents due to their low vapor pressure, high thermal stability, high electrical conductivity, and bio-friendly nature to replace traditional volatile organic solvents in industrial processes. In the present work, the combination of coarse-grained (CG) molecular dynamics (MD) simulations with conductivity measurements was employed to explain the correlation between the micelle morphology and physicochemical and thermodynamic properties of self-assembly. A homologous series of SAIL molecules, 1-n-alkyl-3-methylimidazolium bromide [Cnmim][Br] (n = 4, 6, 8, 10, and 12), were chosen at various concentrations to shed light on this issue. Simultaneously two factors of concentration and alkyl chain length affected the morphology to control the physical and thermodynamic features. Moreover, the nature of the headgroup for two SAILs with the longest alkyl chain was assessed by shifting from imidazolium into ammonium. First, the critical micelle concentration (CMC), the degree of counterion dissociation of micelles, and the standard Gibbs energy of micellization of SAILs were determined using conductivity data. The micelle morphology such as the aggregation number, micelle radius, and moment of inertia was computed before, around, and after the CMC by MD simulation. Simulated results in accordance with the experimental measurements provide a quantitative understanding of the micellar properties. Increasing the alkyl chain length was associated with a non-spherical bigger micelle while the ammonium-based surfactant with a lower repulsion between neighboring monomers in micelles induced bigger and more spherical aggregates. Raising the SAIL concentration did not considerably influence the sphericity of the micelle except for the SAIL with the longest tail. The umbrella sampling method calculated the potential of mean force (PMF) for pulling a monomer of SAIL from a pre-assembled micelle into the solution. The dissociation energy of a SAIL monomer from a micelle increased with the tail length or with shifting into the ammonium head group and was substantially influenced by micelle morphology. Comparison between a sphere micelle with an oval one demonstrated that the dissociation of a SAIL monomer from a non-spherical shape needed a higher amount of energy. An improved understanding of how the shape of the SAIL micelles controls the physicochemical properties and stability helps to extend their application to different chemical processes.

Synergistic effects of binary surfactant mixtures in the adsorption of diclofenac sodium drug from aqueous solution by modified zeolite

In this paper, the surfactant-modified clinoptilolite zeolite (with two methods) were used to remove diclofenac sodium (DFS) as a widely used drug in an aqueous solution. Clinoptilolite was modified by using pure cationic surfactant (cetyltrimethylammonium chloride, CTAC) and the mixed surfactants of CTAC + Triton-X100 (TX100). In the new approach, the synergistic effects between CTAC and TX100 were determined by surface tension measurements in different mole fractions and the optimum ratio (y₁ ≈ 0.8) was identified with the maximum synergism. According to the mole fraction of this composition, the surface of clinoptilolite was modified by mixed surfactants (MSMZ) for the adsorption of DFS and then results compared with modified zeolite with pure cationic surfactant (SMZ). The raw and modified (SMZ and MSMZ) zeolites were characterized by Fourier transform infrared spectroscopy (FT-IR), BET analysis, the scanning electron microscopy (SEM) images, Zeta potential and X-ray. The experimental data of adsorption in equilibrium conditions were also analyzed using different adsorption isotherm models (Langmuir, Freundlich, Hill, Khan, Sips, Redlich-Peterson and Toth) in non-linear forms, and finally, the best model consistent with experimental data is determined (SMZ:Sips and MSMZ:Toth). According to the best isotherm model, the amount of absorption capacity in MSMZ was obtained almost 57% higher than SMZ. In addition, the kinetic adsorption data were correlated with eight various models in order to selection the best model for these systems. The kinetic adsorption data were well described by fractal-like pseudo-first-order (FL-PFO) and IKL models for SMZ and MSMZ adsorbents, respectively. Eight error functions were used to estimate the best fitted isotherm and kinetic models.

Recent Developments in Ionic Liquid-Assisted Topical and Transdermal Drug Delivery

Ionic liquids (ILs) have attracted growing interest as designer solvents/materials for exploring unrealized functions in many areas of research including drug formulations and delivery owing to their inherent tunable physicochemical and biological properties. The use of ILs in the pharmaceutical industry can address challenges related to the use of conventional organic solvent-based chemical permeation enhancers. Their tunability in forming ion pairs with a diverse range of ions enables the task-specific optimization of ILs at the molecular level. In particular, ILs comprising second- and third-generation cations and anions have been extensively used to design biocompatible drug delivery systems to address the challenges related to conventional topical and transdermal drug delivery, including limited permeability, high cytotoxicity, and skin irritation. This review highlights the progress in IL-related research with particular emphasis on the very recent conceptual developments in transdermal drug delivery. Technological advancement and approaches for the formation of IL-based topical and transdermal delivery systems, as well as their promising application in drug delivery, are also discussed.

Interaction of TX-100 and Antidepressant Imipramine Hydrochloride Drug Mixture: Surface Tension, 1H NMR, and FT-IR Investigation

Interfacial interaction amongst the antidepressant drug-imipramine hydrochloride (IMP) and pharmaceutical excipient (triton X-100 (TX-100-nonionic surfactant)) mixed system of five various ratios in dissimilar media (H₂O/50 mmol·kg⁻¹ NaCl/250 mmol·kg⁻¹ urea) was investigated through the surface tension method. In addition, in the aqueous solution, the ¹H-NMR, as well as FT-IR studies of the studied pure and mixed system were also explored and deliberated thoroughly. In NaCl media, properties of pure/mixed interfacial surfaces enhanced as compared with the aqueous system, and consequently the synergism/attractive interaction among constituents (IMP and TX-100) grew, whereas in urea (U) media a reverse effect was detected. Surface excess concentration (Γ_max), composition of surfactant at mixed monolayer (X1σ), activity coefficient (f₁^σ (TX-100) and f₂^σ (IMP)), etc. were determined and discussed thoroughly. At mixed interfacial surfaces interaction, parameter (β^σ) reveals the attractive/synergism among the components. The Gibbs energy of adsorption (ΔGadso) value attained was negative throughout all employed media viewing the spontaneity of the adsorption process. The ¹H NMR spectroscopy was also employed to examine the molecular interaction of IMP and TX-100 in an aqueous system. FT-IR method as well illustrated the interaction amongst the component. The findings of the current study proposed that TX-100 surfactant could act as an efficient drug delivery vehicle for an antidepressant drug. Gels can be used as drug dosage forms due to recent improvements in the design of surfactant systems. Release mechanism of drugs from surfactant/polymer gels is dependent upon the microstructures of the gels and the state of the drugs within the system.

Synthesis, Aggregation Behavior and Drug-binding Interactions of Fatty acid-imidazolium-based Surface-active Ionic Liquids

The renewable fatty acid-based surface-active ionic liquids (SAILs) containing ethyl-substituted imidazolium head groups were prepared and structurally analyzed by Fourier transform infrared spectroscopy (FTIR), ¹HNMR and ¹³CNMR spectroscopy. The products were named as; 3-ethyl-1-(2-dodecanoyl oxy) ethylimidazolium bromide [C₁₂Eeim]Br, 3-ethyl-1-(2-tetradecanoyl oxy) ethylimidazolium bromide [C₁₄Eeim]Br and 3-ethyl-1-(2-hexadecanoyl oxy) ethylimidazolium bromide [C₁₆Eeim]Br. The critical micelle concentration (cmc) values of the three SAILs have been evaluated using conductivity measurements, probe-less UV-visible spectroscopy and fluorescence spectroscopy. The obtained cmc values were compared with the earlier reported non-functionalized SAILs such as [C_nmim]Br and [C_neim]Br where n= 12, 14, 16. The values were found to be 3 to 9 times lower mainly due to the presence of ester chain and also ethyl substituted imidazole ring. Thermodynamic parameters were evaluated by conductivity data at three different temperatures. Further, the aggregation behavior of SAILs with anesthetic drug, lidocaine hydrochloride (LC) has been studied using fluorescence. The fluorescence and UV-visible studies showed strong synergistic interactions operating between SAILs and drug molecules involving H bonding and cation-π interactions. The interactions grew stronger with the elongation of SAIL-chain length (12C-16C). Dynamic light scattering (DLS) and transmission electron microscopy (TEM) measurements suggested the formation of vesicles in SAIL-LC mixtures. These studies may thus offer an effective candidate which would serve as vectors for drug molecules in terms of their enhanced solubilization, permeability and target-specific delivery.

Effects of various media on micellization, adsorption and thermodynamic behaviour of imipramine hydrochloride and antimicrobial surfactant mixtures

The effect of various media (aqueous, NaCl, urea (U) and thiourea (TU)) on the micellization and adsorption activity of varied mixtures of imipramine hydrochloride (IMP) and benzethonium chloride (BZCl) is investigated via tensiometry. In an aqueous medium, the interactions between IMP and BZCl are also evaluated using UV-visible and FTIR spectroscopy. The interaction between components increases with increased mole fraction (α 1) of BZCl in the mixed system (IMP + BZCl). Different parameters, such as micellar and the mixed monolayer component composition, the interaction parameters of the solution and the interface, the activity coefficients of the components in solution and at the interface, and thermodynamic parameters, are computed using different proposed theoretical models (i.e. Clint, Motomura, Rubingh and Rosen). The cmc values obtained for the pure components and mixtures (IMP + BZCl) of all the compositions are found to be less in NaCl than in the aqueous solution while found more in the presence of U or TU. TU is more effective in increasing the cmc of the pure and mixed systems than U. The Gibbs free energy ( Δ G mic ∘ ) values of the studied pure and mixed systems are negative, showing the spontaneous nature of the reaction.

Investigation of Solution Behavior of Antidepressant Imipramine Hydrochloride Drug and Non-Ionic Surfactant Mixture: Experimental and Theoretical Study

In this paper, the interaction of imipramine hydrochloride (IMP, antidepressant drug) and a non-ionic surfactant Triton X-100 (TX-100) mixture in five different ratios through the tensiometric method in different solvents (aqueous/0.050 mol·kg⁻¹ aqueous NaCl/0.250 mol·kg⁻¹ aqueous urea (U)) were examined thoroughly at a temperature of 298 K. UV–Visible studies in an aqueous system of IMP + TX-100 mixtures were also investigated and discussed in detail. The pure (IMP and TX-100) along with the mixtures’ critical micelle concentration (cmc) were assessed by a tensiometric technique. The obtained deviation of the mixtures’ cmc values from their ideal values revealed the nonideal behavior of IMP + TX-100 mixtures amongst IMP and TX-100. Compared to aqueous systems, in the presence of aqueous NaCl, several changes in micelles/mixed micelles occurred, and hence a synergism/attractive interaction amongst components was found increased while in the existence of U, the synergism/attractive interaction between them decreased. The evaluated interaction parameter (β^Rb) value of mixed micelles showed the attractive or synergism between the IMP and TX-100. Various evaluated thermodynamic parameters in an aqueous system showed that the mixed micellization of the IMP + TX-100 mixture was an entropically spontaneous phenomenon, although the existence of salt in all studied systems can somewhat increase the spontaneity of the micellization process and in the aqueous U system, the spontaneity of the micellization process decreased. In an aqueous system, the interaction between IMP and TX-100 was also confirmed by UV–Visible study.