Surface wettability switching of a zeolitic imidazolate framework‐deposited membrane for selective efficient oil/water emulsion separation

The optimization effect of different parameters on the super hydrophobicity of prickly-shaped carbonyl iron particles

In this study, the effects of glucose concentration, temperature, and time parameters of the hydrothermal reaction on the growth of prickly-shaped carbonyl iron were studied by using an experimental design to obtain the maximum superhydrophobicity of the magnetic particles. The experimental design was carried out by Response Surface Methodology (RSM) analysis using the Central Composite Design (CCD) method. Field Emission Scanning Electron Microscopy (FESEM) analysis was performed to qualitatively assess the growth of the prickly-shaped carbonyl iron, and Water Contact Angle (WCA) analysis was used to quantify the superhydrophobicity of the resulting particles. The results revealed that the elevation of the concentration and time increased the roughness (prickly shape) of the particle surface and contact angle up to a point, after which it did not affect them. The temperature elevation caused an increase in the prickly shape of the particles and contact angles and then reduced them. The optimum concentration, temperature, and time were 0.75 Mol L⁻¹, 170 °C, and 4 hours, respectively, for the maximum growth of prickly-shaped particles and the maximum contact angle was 169.7°. Fourier-Transform Infrared Spectroscopy (FT-IR) and thermogravimetric analysis (TGA) results confirmed the presence of glucose and stearic acid chemically bonded to the carbonyl iron particles. The X-ray Diffraction (XRD) results showed that the carbonyl iron had been not converted into iron oxide during the synthesis procedures of the superhydrophobic particles. Vibrating Sample Magnetometer (VSM) analysis showed that making the particles superhydrophobic had little effect on the magnetization reduction.

The effects of glucose concentration, temperature, and time parameters of the hydrothermal reaction on the growth of prickly-shaped magnetic particles were studied by using an experimental design to obtain the maximum superhydrophobicity.

One-step modification of electrospun PVDF nanofiber membranes for effective separation of oil–water emulsion

TA-APTES-SP coating is used to optimize the wettability and stability of PVDF nanofiber membranes for oil–water separation.

Multifunctional Switchable Nanocoated Membranes for Efficient Integrated Purification of Oil/Water Emulsions

Surfaces with unusual under-liquid dual superlyophobicity are attractive on account of their widespread applications, but their development remains difficult due to thermodynamic contradiction. Additionally, these surfaces may suffer from limited antifouling ability, which has restricted their practical applications. Herein, we report a successful in situ growth of a hybrid zeolitic imidazolate framework-8 and zinc oxide nanorod on a porous poly(vinylidene fluoride) membrane (ZIF-8@ZnO-PPVDF) and its application as a self-cleaning switchable barrier material in rapid filtration for emulsified oily wastewater. The novel ZIF-8@ZnO-PPVDF exhibits superior mechanical strength, reversible under-liquid dual superlyophobicity, photocatalytic self-cleaning property, and an effective alternate separation capacity toward both oil-in-water (O/W) and water-in-oil (W/O) emulsions with ultrahigh fluxes and efficiencies (>99%). By simply using a "bait-hook-eliminate" method to separate the O/W emulsions containing soluble organic pollutants, we demonstrate that the ZIF-8@ZnO-PPVDF can achieve stable separation fluxes over 600 L m^-2 h^-1 with high efficiencies and be completely/nondestructively regenerated by visible-light irradiation after each cycle. This study would demonstrate a new approach to prepare an under-liquid dual superlyophobic revivable membrane for various applications.