MOF(Ni)/CNT composites with layer structure for high capacitive performance

Nanocellulose - metal-organic framework (MOF) composites for efficient carbon dioxide capture and sequestration: a review

Air pollution, a major global challenge, poses significant risks to human health and the environment. While various porous materials have been used to reduce pollutants, they have limitations. Metal-organic frameworks (MOFs) stand out due to their unique combination of organic and inorganic components, allowing precise tuning of their structure and functionality. With remarkable properties such as tunable pore sizes and high porosity, MOFs are highly effective for CO2 separation. However, their fragility has led to the integration of bio-based materials such as nanocellulose. Nanocellulose, known for its abundance, non-toxicity, renewability, excellent hydrophilicity, flexibility, strength and low cost, offers a promising support matrix for MOFs. Functionalising nanocellulose with MOFs (NC-MOFs) shows great promise in CO2 adsorption and separation, presenting a valuable approach to mitigate carbon dioxide emissions. This review summarises the properties and synthesis methods involving NC-MOFs, focusing on various types of nanocellulose and their efficiency in CO2 capture. It also explores the adsorption mechanisms and factors influencing the stability and capacity of NC-MOFs in gas capture. Furthermore, we discuss the current limitations and future opportunities of NC-MOFs in addressing global carbon emissions, emphasising their potential role in tackling one of the most critical environmental challenges of our time.

Mechanically Exfoliated Multilayer Graphene-Supported Ni-MOF Parallelogram Nanosheets for Enhanced Supercapacitor Performance

Metal-organic frameworks (MOFs) are regarded as advanced supercapacitor materials owing to their high surface area, redox-active sites, and porosity. However, their insufficient charge carrier mobility remains a critical limitation for practical application. Integrating MOFs with conductive carbon substrates is an effective strategy to break through this limitation. However, conventional carbon materials often require complex preparation methods and pre-activation steps for use in MOF composites. Herein, multilayer graphene (MLG) mechanically exfoliated from expandable graphite is employed as a substrate, and a van der Waals force-assisted chemical deposition method is developed to directly anchor Ni-MOF onto its surface without requiring pre-activation treatment. To optimize the composite, Ni-MOFs with various mass loadings are synthesized on MLG surface. The morphological characteristics and energy storage performance of these composites are thoroughly characterized. Ni-MOF/MLG-0.30 (with a 70.8% Ni-MOF loading on MLG) features a porous stacking structure of well-crystalline Ni-MOF parallelogram nanosheets on MLG, exhibiting optimal electrochemical performance. The composite achieves 1071.4 F·g-1 at 1 A·g-1, and a capacitance retention of 64.9% at the elevated current density of 10 A·g-1. Meanwhile, the composite maintains 63.2% of its initial capacitance after 5000 charge/discharge cycles at 4 A·g-1. A hybrid supercapacitor is fabricated using Ni-MOF/MLG-0.30 cathode and activated carbon anode, delivering 27.9 Wh·kg-1 energy density at 102.5 W·kg-1 power output.

Hierarchical 2D/1D MOFs/electrospun ZIF-67 modified carbon nanofibers heterostructure electrode for high-performance asymmetric supercapacitor

In this paper, a 2 dimensional (2D) metal-organic frameworks (MOFs) nanosheets grown on 1D ZIF-67 modified carbon nanofibers (CNFs) was designed and fabricated with a hierarchical heterostructure. The hierarchical 2D/1D MOFs/CCNF offers rich electrochemical active sites and favorable ion/electron diffusion pathways. The synergistic effect of Co, CNFs and MOFs from heterostructures contributes to superb electrochemical activities. Benefiting from the hierarchical heterostructures optimized by the mass ratio of ZIF-67/PAN and CCNF/NiMOF as well as the type of substrates, CCNF-20@MOF showed a specific capacity of 361.50 C g-1 at 0.5 A g-1, whose charge storage mechanism is dominated by diffusion control. Meanwhile, a bamboo-derived carbon material (BBC) was designed in the solid-state asymmetric supercapacitor (CCNF-20@MOF//BBC). The device exhibited an energy density of 38.89 Wh kg-1 at the power density of 800.02 W kg-1 and excellent cycling stability, that exceed many MOFs based devices. Moreover, it could be successfully used for LED light-emitting, demonstrating a good application prospect. This work provides a feasible strategy for the improved performance of MOFs and CNFs based materials in the field of energy storage.

Overview of recent developments in carbon-based nanocomposites for supercapacitor applications

Energy storage devices are recognized as environmentally friendly technologies. Supercapacitors, known for their high cycle stability, have been proposed as potential alternatives to fossil fuels. Recent studies have focused on selecting suitable electrode materials to achieve energy storage systems with high stability, high specific capacity, and biocompatibility. In particular, carbon-based electrode materials, such as graphene oxide, activated carbon, carbon nanotubes, and carbon-based quantum dots, have attracted considerable attention due to their intrinsic properties, such as high conductivity and stability. However, carbon materials alone exhibit limitations, such as low energy density and low specific capacitance. To address this limitation, the synergistic effect of carbon materials has been combined with other electroactive materials to develop electrode materials with enhanced supercapacitor properties. The present study also investigates the supercapacitor performance of carbon-based nanocomposites. It examines the effect of each carbon material (AC, CNT, GO, rGO) on improving the performance of other electroactive materials, including metal oxides, metal sulfides, MXenes, MOFs, and conductive polymers. This study provides valuable insights for further studies on carbon-based electrode materials for supercapacitor applications.

TEA Guiding Bimetallic MOF with Oriented Nanosheet Arrays for High-Performance Asymmetric Supercapacitors

The development of supercapacitors with ultrahigh power density, high energy density, and compatible integration for wearable microelectronic devices is significant but challenging. Herein, a bimetallic metal-organic framework (Ni/Co-MOF) with oriented nanosheets was obtained via triethylamine (TEA) guiding using a hydrothermal treatment, in which the TEA guides the vertically oriented array structures of the Ni/Co-MOF and ensures a fast ion/electron transmission path. Subsequently, an asymmetric supercapacitor was rationally designed by applying the bimetallic MOF cathode and an activated carbon (AC) anode. The obtained Ni/Co-MOF sample offers a high storage capacity of 2034 F g-1 at 0.5 A g-1 by harnessing the optimized Ni/Co-MOF with uniformly oriented nanosheet arrays. The constructed asymmetric supercapacitors exhibited a large voltage window of 1.4 V in 3.0 M KOH and an outstanding energy density of 29.5 Wh kg-1 at a power density of 199.1 W kg-1 was obtained, with a remarkable capacitance retention of 89% after 2000 cycles.

Engineered Amine-Functionalized Metal-Organic Framework to Fabricate a Composite for Next-Generation Asymmetric Supercapacitors with Ultrahigh Performance: Modulating the Energy Storage Barrier

The present work summarizes the fabrication of an amine-functionalized cadmium-based metal-organic framework (MOF), {[Cd(AT)(BP)]·4DMF}n or Cd_AT-BP, by adopting a simple solvothermal approach using 2-aminoterephthalic acid (AT) as the main linker, while 4,4'-bipyridyl (BP) as an auxiliary linker. The structure of Cd_AT-BP was validated by the single-crystal X-ray diffraction technique that revealed the formation of an overall three-dimensional network with BP acting as a bridge between the 2D sheets of the MOF. The robust framework of Cd_AT-BP decorated with a free amine functional group was utilized for energy storage application. The electrochemical measurements of Cd_AT-BP revealed a maximum areal capacitance of 9.8 mF/cm2 at a scan rate of 5 mV/s. Further, to enhance the practical utility of Cd_AT-BP in energy storage devices, two composites of Cd_AT-BP with reduced graphene oxide (rGO) and multiwalled carbon nanotubes (CNTs), viz., Cd_AT-BP/rGO and Cd_AT-BP/CNT, were prepared by adopting a facile ultrasonication approach. The synthesized Cd_AT-BP/rGO and Cd_AT-BP/CNT composites displayed an impressive areal capacitance of 117 and 37 mF/cm2 (58.5 and 17.5 F/g) at a scan rate of 5 mV/s, respectively, and a capacitance retention of up to 118 and 100% after 5000 cycles at a constant current density of 5 mA/cm2. The highest energy density of about 4.23 mW h/cm2 (2.12 W h/kg) at a current density of 1 mA/cm2 was shown by Cd_AT-BP/rGO among all the three materials attributable to the layered structure of rGO, providing a larger surface area accessible for ion adsorption. Enticed by the remarkable outcomes exhibited by Cd_AT-BP/rGO, we fabricated a two-electrode asymmetric supercapacitor (ASC) device. The developed ASC device revealed energy and power densities of 26.7 mW h/cm2 (13.4 W h/kg) and 3760 mW/cm2 (1880 W/kg), respectively, with a galvanostatic charge-discharge stability of up to 10,000 cycles. The findings identify Cd_AT-BP/rGO as a potential contender for future-generation supercapacitors.

In Situ Construction of NiCoMn-LDH Derived from Zeolitic Imidazolate Framework on Eggshell-Like Carbon Skeleton for High-Performance Flexible Supercapacitors

Active compounds based on LDH (ternary layered double hydroxide) are considered the perfect supercapacitor electrode materials on account of their superior electrochemical qualities and distinct structural characteristics, and flexible supercapacitors are an ideal option as an energy source for wearable electronics. However, the prevalent aggregation effect of LDH materials results in significantly compromised actual specific capacitance, which limits its broad practical applications. In this research, a 3D eggshell-like interconnected porous carbon (IPC) framework with confinement and isolation capability is designed and synthesized by using glucose as the carbon source to disperse the LDH active material and enhance the conductivity of the composite material. Second, by constructing NiCoMn-LDH nanocage structure based on ZIF-67 (zeolitic imidazolate framework-67) at the nanometer scale the obtained IPC/NiCoMn-LDH electrode material can expose more active sites, which allows to achieve excellent specific capacitance (2236 F g-1/ 310.6 mAh g-1 at 1 A g-1), good rate as well as the desired cycle stability (85.9% of the initial capacitance upon 5000 cycles test). The constructed IPC/NiCoMn-LDH//IPC ASC (asymmetric supercapacitor) exhibits superior capacitive property (135 F g-1/60.1 mAh g-1 at 0.5 A g-1) as well as desired energy density (40 Wh kg-1 at 800 W kg-1).

Coupling metal organic frameworks nanozyme with carbon nanotubes on the gradient porous hollow fiber membrane for nonenzymatic electrochemical H2O2 detection

In this paper, we present a gradient porous hollow fiber structure integrated the signal transduction within a microspace, serving as a platform for cellular metabolism monitoring. We developed a nonenzymatic electrochemical electrode by coupling carbon nanotubes (CNT) and metal organic frameworks (MOF) nanozyme on three-dimensional (3D) gradient porous hollow fiber membrane (GPF) for in-situ detection of cell released hydrogen peroxide (H2O2). The GPF was used as a substrate for cell culture as well as the supporting matrix of the working electrode. The ultrasonically coupled CNT@MOF composite was immobilized on the outer surface of the GPF by means of pressure filtration. Notably, the MOF, acting as a peroxidase mimic, exhibits superior stability compared to traditional horseradish peroxidase. The incorporation of CNT not only provided sufficient specific surface area to improve the uniform distribution of MOF nanozyme, but also formed 3D conductive network. This network efficiently facilitates the electrons transfer during the catalytic process of the MOF, addressing the inherent poor conductivity of MOFs. The GPF-CNT@MOF nonenzymatic bioelectrode demonstrated excellent electrocatalytic performance including rapid response, satisfactory sensing selectivity, and attractive stability, which enabled the development of a robust in-situ cellular metabolic monitoring platform.

Ultrasensitive Electrochemical Platform for Dopamine Detection Based on CoNi-MOF@ERGO Composite

An electrochemical sensor applied for dopamine (DA) detection was constructed. An easy static way was used to synthesize bimetallic CoNi-MOF. Next, it was mixed with graphene oxide (GO) under ultrasound to get a uniform suspension. Subsequently, the solution was coated on the glassy carbon electrode (GCE) to form CoNi-MOF@ERGO/GCE by the electrochemical reduction method. The interaction between CoNi-MOF and electrochemically reduced graphene oxide (ERGO) enhances the electrocatalytic performance for DA detection. CoNi-MOF@ERGO/GCE has a wider linear range (0.1-400 μM) and a lower detection limit (0.086 μM) under optimum conditions. Furthermore, it has been applied to test DA in human serum samples. The results reveal that the DA sensor shows excellent performance, which will provide a novel idea for more sensitive and quicker DA detection.

Graphene Oxide Facilitates Transformation of Waste PET into MOF Nanorods in Ionic Liquids

Although though ionic liquids (IL) are rapidly emerging as highly efficient reagents for the depolymerization of waste plastics, their high cost and adverse impact on the environment make the overall process not only expensive but also environmentally harmful. In this manuscript, we report that graphene oxide (GO) facilitates the transformation of waste polyethylene terephthalate (PET) to Ni-MOF (metal organic framework) nanorods anchored on reduced graphene oxide (Ni-MOF@rGO) through NMP (N-Methyl-2-pyrrolidone)-based coordination in ionic liquids. Morphological studies using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed mesoporous three-dimensional structures of micrometer-long Ni-MOF nanorods anchored on reduced graphene substrates (Ni-MOF@rGO ), whereas structural studies using XRD and Raman spectra demonstrated the crystallinity of Ni-MOF nanorods. Chemical analysis of Ni-MOF@rGO carried out using X-ray photoelectron spectroscopy demonstrated that nickel moieties exist in an electroactive OH-Ni-OH state, which was further confirmed by nanoscale elemental maps recorded using energy-dispersive X-ray spectroscopy (EDS). The applicability of Ni-MOF@rGO as an electro-catalyst in a urea-enhanced water oxidation reaction (UOR) is reported. Furthermore, the ability of our newly developed NMP-based IL to grow MOF nanocubes on carbon nanotubes and MOF nano-islands on carbon fibers is also reported.

Recent advances in the electrochemical applications of Ni-based metal organic frameworks (Ni-MOFs) and their derivatives

Nickel-based metal-organic skeletal materials (Ni-MOFs) are a new class of inorganic materials that have aroused attention of investigators during past couple of years. They offer advantages such as high specific surface area, structural diversity, tunable framework etc. This assorted class of materials exhibited catalytic activity and electrochemical properties and display wide range of applications in the fields of electrochemical sensing, electrical energy storage and electrocatalysis. In this context, the presented review focuses on strategies to improve the electrochemical performance and stability of Ni-MOFs through the optimization of synthesis conditions, the construction of composite materials, and the preparation of derivatives of precursors. The review also presents the applications of Ni-MOFs and their derivatives as electrochemical sensors, energy storage devices, and electrocatalysts. In addition, the challenges and further electrochemical development prospects of Ni-MOFs have been discussed.

Nickel(II) Cluster-Based Pillar-Layered Metal-Organic Frameworks for High-Performance Supercapacitors

Most metal-organic frameworks (MOFs) cannot be used as electrode materials for supercapacitors because of their high costs, poor stabilities in aqueous solutions, inferior intrinsic electrocatalytic activities, and poor conductivities. Herein, the application of two nickel(II) cluster-based pillar-layered MOFs, Ni-mba-Na ([Ni₈(mba)₆(Cl)₂Na(OH^-)₃]_n, H₂mba is 2-mercaptobenzoic acid) and Ni-mba-K ([Ni₈(mba)₆(Cl)₂K(OH^-)₃]_n), as electrode materials are reported. They differ from conductive MOFs because they are insulators with small specific surface areas (<10 m² g^-1), and H²mba is an inexpensive raw material. The conductivities of Ni-mba-Na and Ni-mba-K at 30 °C were 4.002 × 10^-10 and >10^-11 S cm^-1, respectively. They showed excellent supercapacitor performance and stabilities and high inherent densities and specific capacitances. The specific powers of their asymmetric supercapacitors could reach up to 16,000 W kg^-1; the specific energies of Ni-mba-Na and Ni-mba-K were 16.9 and 21.8 Wh kg^-1, respectively. Design recommendations for these MOFs are provided based on their structure and performance differences. This paper shows a novel application of nonconductive MOFs in the energy storage field and design of high-performance electrode materials for supercapacitors.

Synthesis of CNT@CoS/NiCo Layered Double Hydroxides with Hollow Nanocages to Enhance Supercapacitors Performance

One of the key factors to improve electrochemical properties is to find exceptional electrode materials. In this work, the nickel-cobalt layered double hydroxide (CNT@CoS/NiCo-LDH) with the structure of a hollow nanocage was prepared by etching CNT@CoS with zeolitic imidazolate framework-67 (ZIF-67) as a template. The results show that the addition of nickel has a great influence on the structure, morphology and chemical properties of materials. The prepared material CNT@CoS/NiCo-LDH-100 (C@CS/NCL-100) inherited the rhombic dodecahedral shape of ZIF-67 well and the CNTs were evenly interspersed among the rhombic dodecahedrons. The presence of CNTs improved the conductivity and surface area of the samples. The C@CS/NCL-100 demonstrates a high specific capacitance of 2794.6 F·g^-1 at 1 A·g^-1. Furthermore, as an assemble device, the device of C@CS/NCL-100 as a positive electrode exhibits a relatively high-energy density of 35.64 Wh·kg^-1 at a power density of 750 W·kg^-1 Further, even at the high-power density of 3750 W·kg^-1, the energy density can still retain 26.38 Wh·kg^-1. Hence, the superior performance of C@CS/NCL-100 can be ascribed to the synergy among CNTs, CoS and NiCo LDH, as well as the excellent three-dimensional structure obtained by used ZIF-67 as a template.