Purification and thermal analysis of perfluoro-n-alkanoic acids

Thermal Phase Transition and Rapid Degradation of Forever Chemicals (PFAS) in Spent Media Using Induction Heating

In this study, we have developed an innovative thermal degradation strategy for treating per- and polyfluoroalkyl substance (PFAS)-containing solid materials. Our strategy satisfies three criteria: the ability to achieve near-complete degradation of PFASs within a short timescale, nonselectivity, and low energy cost. In our method, a metallic reactor containing a PFAS-laden sample was subjected to electromagnetic induction that prompted a rapid temperature rise of the reactor via the Joule heating effect. We demonstrated that subjecting PFASs (0.001-12 μmol) to induction heating for a brief duration (e.g., <40 s) resulted in substantial degradation (>90%) of these compounds, including recalcitrant short-chain PFASs and perfluoroalkyl sulfonic acids. This finding prompted us to conduct a detailed study of the thermal phase transitions of PFASs using thermogravimetric analysis and differential scanning calorimetry (DSC). We identified at least two endothermic DSC peaks for anionic, cationic, and zwitterionic PFASs, signifying the melting and evaporation of the melted PFASs. Melting and evaporation points of many PFASs were reported for the first time. Our data suggest that the rate-limiting step in PFAS thermal degradation is linked with phase transitions (e.g., evaporation) occurring on different time scales. When PFASs are rapidly heated to temperatures similar to those produced during induction heating, the evaporation of melted PFAS slows down, allowing for the degradation of the melted PFAS.

Estimation of vapor pressures of perfluoroalkyl substances (PFAS) using COSMOtherm

The widespread presence of per- and polyfluoroalkyl substances (PFAS) in the environment and a recognition of their possible health effects has, over the past decade, raised public concerns and led to much new research on these materials. In this field, with so many compounds of potential interest or concern, measuring the physical properties of even a small fraction of these compounds is a formidable task. The research community has turned to use of computational methods to begin to predict many useful properties, based just upon the structure of the compound. In this work, a quantum chemistry computational method (COSMO-RS) has been applied for exploring the possibility and accuracy of PFAS compound property estimation. The vapor pressures and boiling points of eleven PFAS are calculated with COSMOtherm and compared with available experimental data and literature calculation data using other packages. In the meantime, these measured results have permitted evaluation of this popular property estimation technique, which has not yet been fully validated for this class of compounds.

Vapor pressure of nine perfluoroalkyl substances (PFASs) determined using the Knudsen Effusion Method

Sublimation vapor pressures of nine pure perfluoroalkyl substances, including Ammonium perfluoro(2-methyl-3-oxahexanoate) (GenX), 1H,1H,2H,2H-Perfluoro-1-decanol (8:2 FTOH), 1H,1H,2H,2H-Perfluoro-1-dodecanol (10:2 FTOH) and C6 to C11 perfluorocarboxylic acids (PFCAs), were measured using the Knudsen technique at near ambient temperatures. Melting temperatures and fusion enthalpies of these compounds were also measured using differential scanning calorimetry. The vapor pressure of GenX ammonium salt is comparable to that of the much higher molecular weight perfluoroundecanoic acid. GenX ammonium salt also did not show actual melting behavior but instead decomposed at around 470 K. The measured near ambient temperature sublimation vapor pressures of the PFCAs and FTOHs were compared with some earlier reported liquid phase vapor pressures obtained at higher temperatures, and reasonable agreement exists between the data obtained in the different studies. The sublimation enthalpies of the PFCAs indicate that the contribution to the sublimation enthalpy of the CF₂ group in the alkyl chain is comparable to that of the CH₂ group in the corresponding non-fluorinated analogues, even though the PFCAs show consistently higher vapor pressures than do the corresponding carbon number alkanoic acids.

Influence of film composition on the morphology, mechanical properties, and surfactant recovery of phase-separated phospholipid-perfluorinated fatty acid mixed monolayers

Monolayer surfactant films composed of a mixture of phospholipids and perfluorinated (or partially fluorinated) surfactants are of potential utility for applications in pulmonary lung surfactant-based therapies. As a simple, minimal model of such a lung surfactant system, binary mixed monolayer films composed of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and perfluorooctadecanoic acid (C18F) prepared on a simplified lung fluid mimic subphase (pH 7.4, 150 mM NaCl) have been characterized in terms of mixing thermodynamics and compressibility (measured through π–A compression isotherms), film morphology (via atomic force, fluorescence, and Brewster angle microscopy), as well as spreading rate and hysteresis response to repeated expansion–contraction cycles for a variety of compositions of mixed films. Under all mixing conditions, films and their components were found to be completely immiscible and phase-separated, though there were significant changes in the aforementioned film properties as a function of composition. Of particular note was the existence of a maximum in the extent of immiscibility (characterized by ΔG(ex)(π) values) and enhanced surfactant recovery during hysteresis experiments at χ(C18F) ≥ 0.30. The latter was attributed to the relatively rapid respreading rate of the perfluorinated amphiphile in comparison with DPPC alone at the air–water interface, which enhances the performance of this mixture as a potential pulmonary lung surfactant. Further, monolayer film structure could be tracked dynamically as a function of compression at the air–water interface via Brewster angle microscopy, with the C18F component being preferentially squeezed out of the film with compression, but returning rapidly upon re-expansion. In general, addition of C18F to DPPC monolayers resulted in improvements to mechanical, structural, and respreading properties of the film, indicating the potential value of these compounds as additives to pulmonary lung surfactant formulations.

Miscibility behavior of two-component monolayers at the air-water interface: perfluorocarboxylic acids and DMPE

Surface pressure (pi)-molecular area (A) and surface potential (DeltaV)-A isotherms have been measured for two-component monolayers of four different perfluorocarboxylic acids [FCn; perfluorododecanoic acid (FC12), perfluorotetradecanoic acid (FC14), perfluorohexadecanoic acid (FC16), and perfluorooctadecanoic acid (FC18)] and dimyristoylphosphatidylethanolamine (DMPE) on 0.15M NaCl (pH 2) at 298.2K. The present study is focused on the miscibility and the interfacial behavior for the binary DMPE/FCn monolayers upon compression. From the isotherms, the miscibility has been elucidated in terms of the additivity rule, the interaction parameter, and the interaction energy. The interaction parameter (or energy) is compared with that for the previous dipalmitoylphosphatidylcholine (DPPC)/FCn systems [Colloids Surf. B 41 (2005) 285-298] to understand the effect of phospholipids' polar headgroup on the binary miscibility. Furthermore, the phase behavior of the DMPE/FCn systems has been morphologically examined using fluorescence microscopy (FM) and atomic force microscopy (AFM). These images reveal the different interaction modes among the four systems; DMPE can be miscible with FC12 and FC14 and immiscible with FC16 and FC18 in the monolayer state. These systematic examinations indicate that the miscibility of perfluorocarboxylic acids and phospholipids depends on combination of hydrocarbon and fluorocarbon chain lengths and on phospholipids' polar headgroups within a monolayer.