Study of charge distribution on the surface of biocolloids

Determination of Pathogens by Electrophoretic and Spectrometric Techniques

In modern medical diagnostics, where analytical chemistry plays a key role, fast and accurate identification of pathogens is becoming increasingly important. Infectious diseases pose a growing threat to public health due to population growth, international air travel, bacterial resistance to antibiotics, and other factors. For instance, the detection of SARS-CoV-2 in patient samples is a key tool to monitor the spread of the disease. While there are several techniques for identifying pathogens by their genetic code, most of these methods are too expensive or slow to effectively analyze clinical and environmental samples that may contain hundreds or even thousands of different microbes. Standard approaches (e.g., culture media and biochemical assays) are known to be very time- and labor-intensive. The purpose of this review paper is to highlight the problems associated with the analysis and identification of pathogens that cause many serious infections. Special attention was paid to the description of mechanisms and the explanation of the phenomena and processes occurring on the surface of pathogens as biocolloids (charge distribution). This review also highlights the importance of electromigration techniques and demonstrates their potential for pathogen pre-separation and fractionation and demonstrates the use of spectrometric methods, such as MALDI-TOF MS, for their detection and identification.

Exposure to polystyrene nanoparticles leads to changes in the zeta potential of bacterial cells

Polymer molecules, the main components of plastics, are an emerging pollutants in various environmental compartments (water, air, soil) that may induce several ecotoxicological effects on live organisms. Therefore, understanding how plastic particles interact with bacterial cell membranes is crucial in analysing their associated risks in ecosystems and human microbiota. However, relatively little is known about the interaction between nanoplastics and bacteria. The present work focuses on Staphylococcus aureus and Klebsiella pneumoniae, representing the Gram-positive and Gram-negative bacteria respectively, exposed to 100 nm diameter polystyrene nanoparticles (PS NPs). The nanoparticles attach to the cells' membranes of both bacteria, changing their electrical charge, but without the effect of killing the cells. PS NPs caused a change in zeta potential values (both species of bacterial strains), dependent on particle concentration, pH, as well as on exposure time of bacteria to them. Through the application of AFM and FTIR techniques, the presence of PS NPs on bacterial surfaces was detected, suggesting the affinity of the particles to bacterial components, but without any changes in the morphology of the tested bacteria. The zeta potential can be more widely used in the study of interactions between nanostructures and cells.

Effects of PFOA on the physicochemical properties of anaerobic granular sludge: Performance evaluation, microbial community and metagenomic analysis

The impact of perfluorooctanoic acid (PFOA) on the anaerobic granular sludge was evaluated through a sequential batch experiment. Results showed that PFOA inhibited the chemical oxygen demand (COD) removal rate of the sludge and the dosage of 100 mg/L PFOA was more obvious. However, this negative effect would gradually weaken with the adaptation of microorganisms. For the 50 mg/L PFOA experimental group, the proteins content in the extracellular polymeric substances (EPS) of the anaerobic granular sludge increased from 1.53 mg/g to 3.65 mg/g. Meanwhile, PFOA inhibited the 2-(p-iodophenyl)-3-(p-nitrophenyl)-5-phenyltetrazolium chloride (INT) activity of the anaerobic granular sludge. Furthermore, 100 mg/L PFOA reduced the relative abundance of Proteobacteria by 5.99% and Longilinea by 1.11%. 100 mg/L PFOA mainly restricted COD removal by affecting the glycolysis process, with the abundances of glucokinase and pyruvate kinase reduced by 8% and 28.1%, respectively. Compared with the control group, the relative abundance of the methyl-coenzyme M reductase alpha subunit increased by 84%, respectively, under 100 mg/L PFOA.

Problems with identifying and distinguishing salivary streptococci: a multi-instrumental approach

Aim: The purpose of this study was to create an alternative protocol for the DNA-based identification of salivary microbiota focused on the distinguishing of Streptococcus species. Materials & methods: Salivary bacteria were identified using 16S rDNA sequencing and proteins and lipids profiling using MALDI-TOF/MS as well as FTIR analysis. Results: Most of the isolates belonged to streptococci - mostly the salivarious group indistinguishable by the molecular technique. In turn, MALDI analysis allowed for their fast and reliable classification. Although FTIR spectroscopy demonstrated the correct species classification, the spectra interpretation was time consuming and complicated. Conclusion: MALDI-TOF/MS demonstrated the biggest effectiveness in the identification and discrimination between the salivary streptococci, which could be easily incorporated in the workflow of routine microbiological laboratories.

Zeta potential beyond materials science: Applications to bacterial systems and to the development of novel antimicrobials

This review summarizes the theory of zeta potential (ZP) and the most relevant data about how it has been used for studying bacteria. We have especially focused on the discovery and characterization of novel antimicrobial compounds. The ZP technique may be considered an indirect tool to estimate the surface potential of bacteria, a physical characteristic that is key to maintaining optimal cell function. For this reason, targeting the bacterial surface is of paramount interest in the development of new antimicrobials. Surface-acting agents have been found to display a remarkable bactericidal effect and have simultaneously revealed a low tendency to trigger resistance. Changes in the bacterial surface as a result of various processes can also be followed by ZP measurements. However, due to the complexity of the bacterial surface, some considerations regarding the assessment of ZP must first be taken into account. Evidence on the application of ZP measurements to the characterization of bacteria and biofilm formation is presented next. We finally discuss the feasibility of using the ZP technique to assess antimicrobial-induced changes in the bacterial surface. Among these changes are those related to the interaction of the agent with different components of the cell envelope, membrane permeabilization, and loss of viability.

Beyond Risk: Bacterial Biofilms and Their Regulating Approaches

Bacterial biofilms are complex surface attached communities of bacteria held together by self-produced polymer matrixs mainly composed of polysaccharides, secreted proteins, and extracellular DNAs. Bacterial biofilm formation is a complex process and can be described in five main phases: (i) reversible attachment phase, where bacteria non-specifically attach to surfaces; (ii) irreversible attachment phase, which involves interaction between bacterial cells and a surface using bacterial adhesins such as fimbriae and lipopolysaccharide (LPS); (iii) production of extracellular polymeric substances (EPS) by the resident bacterial cells; (iv) biofilm maturation phase, in which bacterial cells synthesize and release signaling molecules to sense the presence of each other, conducing to the formation of microcolony and maturation of biofilms; and (v) dispersal/detachment phase, where the bacterial cells depart biofilms and comeback to independent planktonic lifestyle. Biofilm formation is detrimental in healthcare, drinking water distribution systems, food, and marine industries, etc. As a result, current studies have been focused toward control and prevention of biofilms. In an effort to get rid of harmful biofilms, various techniques and approaches have been employed that interfere with bacterial attachment, bacterial communication systems (quorum sensing, QS), and biofilm matrixs. Biofilms, however, also offer beneficial roles in a variety of fields including applications in plant protection, bioremediation, wastewater treatment, and corrosion inhibition amongst others. Development of beneficial biofilms can be promoted through manipulation of adhesion surfaces, QS and environmental conditions. This review describes the events involved in bacterial biofilm formation, lists the negative and positive aspects associated with bacterial biofilms, elaborates the main strategies currently used to regulate establishment of harmful bacterial biofilms as well as certain strategies employed to encourage formation of beneficial bacterial biofilms, and highlights the future perspectives of bacterial biofilms.

The influence of different pH on the electrophoretic behaviour of Saccharomyces cerevisiae modified by calcium ions

The effect of a different pH on Saccharomyces cerevisiae cells modified with calcium ions was investigated by the capillary zone electrophoresis technique. For the identification of the wild strain of S. cerevisiae, the ribosomal nucleic acid sequencing and internal transcribed spacer sequencing as well as spectrometric approach were applied. The potentiometric titration and Fourier transform infrared spectroscopy have shown the occurrence of active functional groups such as carboxyl, amine/hydroxyl, phosphate/hydrogen phosphate groups on the surface of native yeast cells. Moreover, the spectroscopy study in a medium infrared range was carried out to identify the functional groups of yeast cells that participate in calcium ions binding interaction. Furthermore, the microscopic and spectrometric analysis shows that the pH value of the calcium ions solution has a significant effect on the intensity yeast cells clumping. Additionally, the impact of yeast cell clumping on the electrophoretic behaviours was examined. The modification of surface functional groups by calcium ions significantly affected the efficiency of electrophoretic separation. However, these changes did not affect the accuracy of S. cerevisiae identification by MALDI equipment with BioTyper platform. These results form the analytical solution for coupling of electrophoresis and MALDI-TOF MS technique.

In vitroantibacterial activity of oxide and non-oxide bioceramics for arthroplastic devices: II. Fourier transform infrared spectroscopy

The metabolic response of Gram-positiveStaphylococcus epidermidisbacteria to bioceramic substrates was probed by Fourier transform infrared spectroscopy.

Microbial Analysis of Escherichia coli ATCC, Lactobacteria and Saccharomyces cerevisiae Using Capillary Electrophoresis Approach

Rapid detection and identification of microorganisms is a challenging and important aspect in many areas of our life, beginning with medicine, ending with industry. Unfortunately, classical methods of microorganisms identification are based on time-consuming and labor-intensive approaches. Screening techniques require rapid and cheap grouping of bacterial isolates; however, modern bioanalytics demands comprehensive bacterial studies on molecular level. The new approach to the rapid identification of bacteria is to use the electromigration techniques, especially capillary zone electrophoresis (CZE). CZE is an important technique used in the analysis of microorganisms. However, the analysis of microbial complexes using this technology still encounters several problems-uncontrolled aggregation and/or adhesion to the capillary surface. One way to resolve this issue is the CZE analysis of microbial cell with surface charge modification by bivalent metal ions (e.g., Ca(2+) aq, Zn aq). Under the above conditions, bacterial cells create compact aggregates, and fewer high-intensity signals are observed in electropherograms. The chapter presents the capillary electrophoresis of microbial aggregates approach with UV and one-dimensional intact cell matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (ICM MS) detection.

The electrostatic behavior of the bacterial cell wall using a smoothing function to describe the charge-regulated volume charge density profile

The Donnan potential can be observed in many biological systems due to the presence of polyelectrolytes as proteins and nucleic acids. The aim of this work was to present a useful tool to describe the fixed and charge-regulated volume charge density profile through the use of a smoothing function and to obtain the electrostatic potential profile as well as the Donnan potential of this system by solving Poisson-Boltzmann (PB) equation. When we use the smoothing function, the Donnan potential arises automatically from the solution of only one Poisson-Boltzmann equation and it is not necessary to impose this potential for treating charged system in the presence of a membrane. The electrostatic behavior across the Bacillus brevis wall considering the dependence on the ionization of the cell wall functional groups as a function of the solution pH was analyzed. An important issue was to show that potentiometric titration data could be used together with the Poisson-Boltzmann equation to predict the electrostatic behavior (e.g., zeta potential) of the bacterial cell surface.