Macroporous bacterial cellulose grafted by oligopeptides induces biomimetic mineralization via interfacial wettability

Multifunctional bacterial cellulose-based aerogel with tunable mechanical property for filtration and thermal insulation

Innovative materials for sustainable applications are of increasing interest in scientific research. The practicality of bacterial cellulose (BC) derived aerogels could be enhanced if they could fulfill the required mechanical property for applications. In this study, double-network aerogels composed of BC and cotton fibers (CF) were fabricated using the directional ice-templated method. The impact of different CF contents on the interfacial and structural properties of the BC/CF aerogels was investigated. With the introduction of CF, the mechanical properties of BC/CF aerogels were improved. With 33 % CF addition, the compressive strength of BC/CF aerogels reached a maximum value and achieved 34.2 kPa along the parallel ("a") direction, which is 110 % higher than that of pristine BC aerogel (16.2 kPa). With the introduction of methyl trimethoxy silane (MTMS), the mechanical properties and elasticity were further enhanced (97.2 kPa). Furthermore, the hybrid aerogels also demonstrated excellent thermal insulation and air filtration properties, A thermal conductivity of 26.0 mW/m·K along the perpendicular ("p") direction and a quality factor (QF) of 0.081 Pa-1 were achieved. Notably, the hybrid aerogels exhibited excellent biodegradation performance in soil burial tests. These results open up new avenues for the development of BC derived aerogels, and position them as a sustainable alternative to filtration and thermal insulation materials.

Next-generation photodynamic antimicrobial materials made by direct synthesis of functional bacterial cellulose

Bacterial cellulose (BC) regularly uses chemical or physical modifications to produce antimicrobial wound dressings. However, there is a risk of loss of functional components during application. Moreover, a significant hurdle lies in successfully integrating durable and highly effective bactericidal entities with BC. Herein, we successfully synthesized a photodynamic antibacterial cellulose through direct in situ microbial fermentation, incorporating the photosensitizer protoporphyrin IX-modified glucosamine (PPIX-GlcN) into cellulose to form PIXX-BC biopolymers. Excitingly, the PPIX-BC membrane exhibited robust and uniform red fluorescence, which is crucial for monitoring the bacterial fermentation process. Our results demonstrated that the biocompatibility PPIX-BC membrane possessed potent light-triggered photodynamic bactericidal activity, effectively suppressing the growth of E. coli and S. aureus while also promoting skin wounds repair. Consequently, this research validated the possibility of leveraging microorganisms to bio-functionalize BC, conferring it with photocatalytic antibacterial properties. Furthermore, successfully modification of the microorganisms' glucose carbon source offers valuable insights into biosynthesis of other living materials through microbial metabolism.

Highly efficient construction of sustainable bacterial cellulose aerogels with boosting PM filter efficiency by tuning functional group

Air pollution has become a major public health concern, attracting considerable attention from researchers working on environmentally friendly and sustainable materials. In this work, bacterial cellulose (BC) derived aerogels were fabricated by the directional ice-templated method and used as filters to remove PM particles. We modified the surface functional groups of BC aerogel with reactive silane precursors, and investigated the interfacial and structural properties of those aerogels. The results show that BC-derived aerogels have excellent compressive elasticity, and their directional growth orientation inside the structure significantly reduced pressure drop. Moreover, the BC-derived filters exhibit an exceptional quantitative removal effect on fine particulate matter, which, in the presence of high concentrations of fine particulate matter, they can achieve a high-efficiency removal standard of 95 %. Meanwhile, the BC-derived aerogels showed superior biodegradation performance in the soil burial test. These results paved the way for BC-derived aerogels development as a great sustainable alternative to treat air pollution.

The biosynthesis of amidated bacterial cellulose derivatives via in-situ strategy

Bacterial cellulose, as a kind of natural biopolymer produced by bacterial fermentation, has attracted wide attention owing its unique physical and chemical properties. Nevertheless, the single functional group on the surface of BC greatly hinders its wider application. The functionalization of BC is of great significance to broaden the application of BC. In this work, N-acetylated bacterial cellulose (ABC) was successfully prepared using K. nataicola RZS01-based direct synthetic method. FT-IR, NMR and XPS confirmed the in-situ modification of BC by acetylation. The SEM and XRD results demonstrated that ABC has a lower crystallinity and higher fiber width compare with pristine 88 BCE % cell viability on NIH-3 T3 cell and near zero hemolysis ratio indicate its good biocompatibility. In addition, the as-prepared acetyl amine modified BC was further treated by nitrifying bacteria to enrich its functionalized diversity. This study provides a mild in-situ pathway to construct BC derivatives in an environmentally friendly way during its metabolism.

Solution plasma synthesis of bacterial cellulose acetate derived from nata de coco waste incorporated with polyether block amide

Cellulose acetate (CA), one of the most important cellulose derivatives, is used in various applications especially in membranes, films, fibers, filters, and polymers. Because of the tough and flexible character and resistance to acids of CA, bacterial cellulose acetate (BCA) has been used as reinforcement for high performance separator purposes. In this study, BCA was synthesized through the heterogeneous acetylation in acetic solution with H₂SO₄ as catalyst by solution plasma process (SPP) of bacterial cellulose (BC) extracted form nata de coco waste. The SPP was considered as mild, simple, and fast method for many kinds of synthesis. The solution plasma time was studied to obtain considerably high DS values (in this work, DS = 1.95). The high DS values are an important feature when considering an environmental factor, good liquid transport and excellent absorption. Furthermore, the BCA incorporated with poly ether block amide by electrospinning method is successfully fabricated as nanofibrous membranes. The proposed PEBAX/BCA nanofibrous membranes display superior sufficient porosity (74.7%), exceptional liquid electrolyte uptake (364.6%), sufficient thermal dimensional stability at 150 °C, great electrochemical stability (discharge capacity at 0.2C = 102.14 mAh g^-1), and high ionic conductivity (9.12 × 10^-3 S/cm). Furthermore, the PEBAX/BCA nanofibrous membranes can be used as high-performance separators enhancing its safety for Li-ion battery applications.

Bacterial Cellulose-A Remarkable Polymer as a Source for Biomaterials Tailoring

Nowadays, the development of new eco-friendly and biocompatible materials using ‘green’ technologies represents a significant challenge for the biomedical and pharmaceutical fields to reduce the destructive actions of scientific research on the human body and the environment. Thus, bacterial cellulose (BC) has a central place among these novel tailored biomaterials. BC is a non-pathogenic bacteria-produced polysaccharide with a 3D nanofibrous structure, chemically identical to plant cellulose, but exhibiting greater purity and crystallinity. Bacterial cellulose possesses excellent physicochemical and mechanical properties, adequate capacity to absorb a large quantity of water, non-toxicity, chemical inertness, biocompatibility, biodegradability, proper capacity to form films and to stabilize emulsions, high porosity, and a large surface area. Due to its suitable characteristics, this ecological material can combine with multiple polymers and diverse bioactive agents to develop new materials and composites. Bacterial cellulose alone, and with its mixtures, exhibits numerous applications, including in the food and electronic industries and in the biotechnological and biomedical areas (such as in wound dressing, tissue engineering, dental implants, drug delivery systems, and cell culture). This review presents an overview of the main properties and uses of bacterial cellulose and the latest promising future applications, such as in biological diagnosis, biosensors, personalized regenerative medicine, and nerve and ocular tissue engineering.

When microbial biotechnology meets material engineering

Bacterial biopolymers such as bacterial cellulose (BC), alginate or polyhydroxyalkanotes (PHAs) have aroused the interest of researchers in many fields, for instance biomedicine and packaging, due to their being biodegradable, biocompatible and renewable. Their properties can easily be tuned by means of microbial biotechnology strategies combined with materials science. This provides them with highly diverse properties, conferring them non-native features. Herein we highlight the enormous structural diversity of these macromolecules, how are they produced, as well as their wide range of potential applications in our daily lives. The emergence of new technologies, such as synthetic biology, enables the creation of next-generation-advanced materials presenting smart functional properties, for example the ability to sense and respond to stimuli as well as the capacity for self-repair. All this has given rise to the recent emergence of biohybrid materials, in which a synthetic component is brought to life with living organisms. Two different subfields have recently garnered particular attention: hybrid living materials (HLMs), such as encapsulation or bioprinting, and engineered living materials (ELMs), in which the material is created bottom-up with the use of microbial biotechnology tools. Early studies showed the strong potential of alginate and PHAs as HLMs, whilst BC constituted the most currently promising material for the creation of ELMs.

From Residues to Added-Value Bacterial Biopolymers as Nanomaterials for Biomedical Applications

Bacterial biopolymers are naturally occurring materials comprising a wide range of molecules with diverse chemical structures that can be produced from renewable sources following the principles of the circular economy. Over the last decades, they have gained substantial interest in the biomedical field as drug nanocarriers, implantable material coatings, and tissue-regeneration scaffolds or membranes due to their inherent biocompatibility, biodegradability into nonhazardous disintegration products, and their mechanical properties, which are similar to those of human tissues. The present review focuses upon three technologically advanced bacterial biopolymers, namely, bacterial cellulose (BC), polyhydroxyalkanoates (PHA), and γ-polyglutamic acid (PGA), as models of different carbon-backbone structures (polysaccharides, polyesters, and polyamides) produced by bacteria that are suitable for biomedical applications in nanoscale systems. This selection models evidence of the wide versatility of microorganisms to generate biopolymers by diverse metabolic strategies. We highlight the suitability for applied sustainable bioprocesses for the production of BC, PHA, and PGA based on renewable carbon sources and the singularity of each process driven by bacterial machinery. The inherent properties of each polymer can be fine-tuned by means of chemical and biotechnological approaches, such as metabolic engineering and peptide functionalization, to further expand their structural diversity and their applicability as nanomaterials in biomedicine.

Oscillating Magnetic Field Regulates Cell Adherence and Endothelialization Based on Magnetic Nanoparticle-Modified Bacterial Cellulose

Despite the widely explored biomaterial scaffolds in vascular tissue engineering applications lately, no ideal platform has been provided for small diameter synthetic vascular grafts mainly due to the thrombosis issue. Endothelium is the only known completely non-thrombogenic material; so, functional endothelialization onto vascular biomaterials is critical in maintaining the patency of vascular networks. Bacterial cellulose (BC) is a natural biomaterial with superior biocompatibility and appropriate hydrophilicity as potential vascular grafts. In previous studies, surface modification of active peptides such as Arg-Gly-Asp (RGD) sequences onto biomaterials has been proven to achieve accelerated and selective endothelial cell (EC) adhesion. In our study, we demonstrated a new strategy to remotely regulate the adhesion of endothelial cells based on an oscillating magnetic field and achieve successful endothelialization on the modified BC membranes. In details, we synthesized bacterial cellulose (BC), magnetic BC (MBC), and RGD peptide-grafted magnetic BC (RMBC), modified with the HOOC-PEG-COOH-coated iron oxide nanoparticles (PEG-IONs). The endothelial cells were cultured on the three materials under different frequencies of an oscillating magnetic field, including "stationary" (0 Hz), "slow" (0.1 Hz), and "fast" (2 Hz) groups. Compared to BC and MBC membranes, the cells on RMBC membranes generally show better adhesion and proliferation. Meanwhile, the "slow" frequency of a magnetic field promotes this phenomenon on RMBC and achieves endothelialization after culture for 4 days, whereas "fast" inhibits the cellular attachment. Overall, we demonstrate a non-invasive and convenient method to regulate the endothelialization process, with promising applications in vascular tissue engineering.