Classification of epileptic motor manifestations using inertial and magnetic sensors

IoT based Monitoring system for Epileptic patients

The unpredictable nature of epileptic seizures makes it challenging to detect and effectively treat this disorder. The seizures are random, and most epileptic patients experience dangerous physical symptoms during an attack that renders the patient uneasy when conducting their daily tasks. This paper focuses on the generalised type of epilepsy, namely "Grand mal epilepsy Tonic-Clonic (GTC) seizure. The research aims to monitor symptoms of epileptic disease behaviour signals in humans and prevent it at its early stage of illness. To achieve this objective, we used the Electrocardiogram (ECG), Electromyography (EMG), accelerometer 3-axes for fall detection, and Dallas sensor for body temperature signals monitoring for updating the IoT system. The fuzzy logic algorithm that has been used to assess specified data set of diseased patients' parameters allows the classification into diverse types of seizures such as heart rate, body temperature, muscles spasm and falls. These are used as inputs to obtain the seizure type as an output which is then illustrated graphically on the dashboard of an IoT platform (Think-Speak), where abnormal conditions have been used to notify the medical personnel by sending an SMS message through "If This Then That” (IFTTT) technology. A prototype of an epileptic monitoring system has been successfully built and tested. It has an average accuracy of 98.90%, 95.49%, 83.0%, and 87.21% for body temperature, heart rate monitoring, muscle spasm, and fall detection.

The Challenging Path to Developing a Mobile Health Device for Epilepsy: The Current Landscape and Where We Go From Here

Seizure detection, and more recently seizure forecasting, represent important avenues of clinical development in epilepsy, promoted by progress in wearable devices and mobile health (mHealth), which might help optimizing seizure control and prevention of seizure-related mortality and morbidity in persons with epilepsy. Yet, very long-term continuous monitoring of seizure-sensitive biosignals in the ambulatory setting presents a number of challenges. We herein provide an overview of these challenges and current technological landscape of mHealth devices for seizure detection. Specifically, we display, which types of sensor modalities and analytical methods are available, and give insight into current clinical practice guidelines, main outcomes of clinical validation studies, and discuss how to evaluate device performance at point-of-care facilities. We then address pitfalls which may arise in patient compliance and the need to design solutions adapted to user experience.

Assessing the feasibility of detecting epileptic seizures using non-cerebral sensor data

This paper investigates the feasibility of using non-cerebral, time-series data to detect epileptic seizures. Data were recorded from fifteen patients (7 male, 5 female, 3 not noted, mean age 36.17 yrs), five of whom had a total of seven seizures. Patients were monitored in an inpatient setting using standard video-electroencephalography (vEEG), while also wearing sensors monitoring electrocardiography, electrodermal activity, electromyography, accelerometry, and audio signals (vocalizations). A systematic and detailed study was conducted to identify the sensors and the features derived from the non-cerebral sensors that contribute most significantly to separability of data acquired during seizures from non-seizure data. Post-processing of the data using linear discriminant analysis (LDA) shows that seizure data are strongly separable from non-seizure data based on features derived from the signals recorded. The mean area under the receiver operator characteristic (ROC) curve for each individual patient that experienced a seizure during data collection, calculated using LDA, was 0.9682. The features that contribute most significantly to seizure detection differ for each patient. The results show that a multimodal approach to seizure detection using the specified sensor suite is promising in detecting seizures with both sensitivity and specificity. Moreover, the study provides a means to quantify the contribution of each sensor and feature to separability. Development of a non-electroencephalography (EEG) based seizure detection device would give doctors a more accurate seizure count outside of the clinical setting, improving treatment and the quality of life of epilepsy patients.

[Mobile seizure monitoring in epilepsy patients]

Wearables are receiving much attention from both epilepsy patients and treating physicians, for monitoring of seizure frequency and warning of seizures. They are also of interest for the detection of seizure-associated risks of patients, for differential diagnosis of rare seizure types and prediction of seizure-prone periods. Accelerometry, electromyography (EMG), heart rate and further autonomic parameters are recorded to capture clinical seizure manifestations. Currently, a clinical use to document nocturnal motor seizures is feasible. In this review the available devices, data on the performance in the documentation of seizures, current options for clinical use and developments in data analysis are presented and critically discussed.

Seizure detection: do current devices work? And when can they be useful?

PURPOSE OF REVIEW

The unpredictability and apparent randomness of epileptic seizures is one of the most vexing aspects of epilepsy. Methods or devices capable of detecting seizures may help prevent injury or even death and significantly improve quality of life. Here, we summarize and evaluate currently available, unimodal, or polymodal detection systems for epileptic seizures, mainly in the ambulatory setting.

RECENT FINDINGS

There are two broad categories of detection devices: EEG-based and non-EEG-based systems. Wireless wearable EEG devices are now available both in research and commercial arenas. Neuro-stimulation devices are currently evolving and initial experiences of these show potential promise. As for non-EEG devices, different detecting systems show different sensitivity according to the different patient and seizure types. Regardless, when used in combination, these modalities may complement each other to increase positive predictive value. Although some devices with high sensitivity are promising, practical widespread use of such detection systems is still some way away. More research and experience are needed to evaluate the most efficient and integrated systems, to allow for better approaches to detection and prediction of seizures. The concept of closed-loop systems and prompt intervention may substantially improve quality of life for patients and carers.

Spectral Analysis of Acceleration Data for Detection of Generalized Tonic-Clonic Seizures

Generalized tonic-clonic seizures (GTCSs) can be underestimated and can also increase mortality rates. The monitoring devices used to detect GTCS events in daily life are very helpful for early intervention and precise estimation of seizure events. Several studies have introduced methods for GTCS detection using an accelerometer (ACM), electromyography, or electroencephalography. However, these studies need to be improved with respect to accuracy and user convenience. This study proposes the use of an ACM banded to the wrist and spectral analysis of ACM data to detect GTCS in daily life. The spectral weight function dependent on GTCS was used to compute a GTCS-correlated score that can effectively discriminate between GTCS and normal movement. Compared to the performance of the previous temporal method, which used a standard deviation method, the spectral analysis method resulted in better sensitivity and fewer false positive alerts. Finally, the spectral analysis method can be implemented in a GTCS monitoring device using an ACM and can provide early alerts to caregivers to prevent risks associated with GTCS.

Non-EEG seizure detection systems and potential SUDEP prevention: State of the art: Review and update

PURPOSE

Detection of, and alarming for epileptic seizures is increasingly demanded and researched. Our previous review article provided an overview of non-invasive, non-EEG (electro-encephalography) body signals that can be measured, along with corresponding methods, state of the art research, and commercially available systems. Three years later, many more studies and devices have emerged. Moreover, the boom of smart phones and tablets created a new market for seizure detection applications.

METHOD

We performed a thorough literature review and had contact with manufacturers of commercially available devices.

RESULTS

This review article gives an updated overview of body signals and methods for seizure detection, international research and (commercially) available systems and applications. Reported results of non-EEG based detection devices vary between 2.2% and 100% sensitivity and between 0 and 3.23 false detections per hour compared to the gold standard video-EEG, for seizures ranging from generalized to convulsive or non-convulsive focal seizures with or without loss of consciousness. It is particularly interesting to include monitoring of autonomic dysfunction, as this may be an important pathophysiological mechanism of SUDEP (sudden unexpected death in epilepsy), and of movement, as many seizures have a motor component.

CONCLUSION

Comparison of research results is difficult as studies focus on different seizure types, timing (night versus day) and patients (adult versus pediatric patients). Nevertheless, we are convinced that the most effective seizure detection systems are multimodal, combining for example detection methods for movement and heart rate, and that devices should especially take into account the user's seizure types and personal preferences.

A Movement Monitor Based on Magneto-Inertial Sensors for Non-Ambulant Patients with Duchenne Muscular Dystrophy: A Pilot Study in Controlled Environment

Measurement of muscle strength and activity of upper limbs of non-ambulant patients with neuromuscular diseases is a major challenge. ActiMyo^® is an innovative device that uses magneto-inertial sensors to record angular velocities and linear accelerations that can be used over long periods of time in the home environment. The device was designed to insure long-term stability and good signal to noise ratio, even for very weak movements. In order to determine relevant and pertinent clinical variables with potential for use as outcome measures in clinical trials or to guide therapy decisions, we performed a pilot study in non-ambulant neuromuscular patients. We report here data from seven Duchenne Muscular Dystrophy (DMD) patients (mean age 18.5 ± 5.5 years) collected in a clinical setting. Patients were assessed while wearing the device during performance of validated tasks (MoviPlate, Box and Block test and Minnesota test) and tasks mimicking daily living. The ActiMyo^® sensors were placed on the wrists during all the tests. Software designed for use with the device computed several variables to qualify and quantify muscular activity in the non-ambulant subjects. Four variables representative of upper limb activity were studied: the rotation rate, the ratio of the vertical component in the overall acceleration, the hand elevation rate, and an estimate of the power of the upper limb. The correlations between clinical data and physical activity and the ActiMyo^® movement parameters were analyzed. The mean of the rotation rate and mean of the elevation rate appeared promising since these variables had the best reliability scores and correlations with task scores. Parameters could be computed even in a patient with a Brooke functional score of 6. The variables chosen are good candidates as potential outcome measures in non-ambulant patients with Duchenne Muscular Dystrophy and use of the ActiMyo^® is currently being explored in home environment.

Trial Registration: ClinicalTrials.gov NCT01611597

Feature selection methods for accelerometry-based seizure detection in children

We investigate the application of feature selection methods and their influence on distinguishing nocturnal motor seizures in epileptic children from normal nocturnal movements using accelerometry signals. We studied two feature selection methods applied one after the other to reduce the complexity and computation costs of least-squares support vector machine (LS-SVM) models. Simultaneous feature selection analyses were performed for each seizure type individually and jointly. Starting from 140 features, a filter method based on mutual information was applied to remove irrelevant and redundant features. The obtained subset was further reduced through a wrapper feature selection strategy using an LS-SVM classifier with both forward search and backward elimination. The discriminative power of each feature subset was evaluated on the test data in terms of the area under the receiver operating characteristic curve, sensitivity, and false detection rate per hour. We showed that, by using only a filter method for feature selection, it was possible to obtain classification results of comparable or slightly reduced performance with respect to the complete feature set. The attained results could facilitate further development of accelerometry-based seizure detection and alarm systems.

NeuroKinect: A Novel Low-Cost 3Dvideo-EEG System for Epileptic Seizure Motion Quantification

Epilepsy is a common neurological disorder which affects 0.5-1% of the world population. Its diagnosis relies both on Electroencephalogram (EEG) findings and characteristic seizure-induced body movements--called seizure semiology. Thus, synchronous EEG and (2D)video recording systems (known as Video-EEG) are the most accurate tools for epilepsy diagnosis. Despite the establishment of several quantitative methods for EEG analysis, seizure semiology is still analyzed by visual inspection, based on epileptologists' subjective interpretation of the movements of interest (MOIs) that occur during recorded seizures. In this contribution, we present NeuroKinect, a low-cost, easy to setup and operate solution for a novel 3Dvideo-EEG system. It is based on a RGB-D sensor (Microsoft Kinect camera) and performs 24/7 monitoring of an Epilepsy Monitoring Unit (EMU) bed. It does not require the attachment of any reflectors or sensors to the patient's body and has a very low maintenance load. To evaluate its performance and usability, we mounted a state-of-the-art 6-camera motion-capture system and our low-cost solution over the same EMU bed. A comparative study of seizure-simulated MOIs showed an average correlation of the resulting 3D motion trajectories of 84.2%. Then, we used our system on the routine of an EMU and collected 9 different seizures where we could perform 3D kinematic analysis of 42 MOIs arising from the temporal (TLE) (n = 19) and extratemporal (ETE) brain regions (n = 23). The obtained results showed that movement displacement and movement extent discriminated both seizure MOI groups with statistically significant levels (mean = 0.15 m vs. 0.44 m, p<0.001; mean = 0.068 m(3) vs. 0.14 m(3), p<0.05, respectively). Furthermore, TLE MOIs were significantly shorter than ETE (mean = 23 seconds vs 35 seconds, p<0.01) and presented higher jerking levels (mean = 345 ms(-3) vs 172 ms(-3), p<0.05). Our newly implemented 3D approach is faster by 87.5% in extracting body motion trajectories when compared to a 2D frame by frame tracking procedure. We conclude that this new approach provides a more comfortable (both for patients and clinical professionals), simpler, faster and lower-cost procedure than previous approaches, therefore providing a reliable tool to quantitatively analyze MOI patterns of epileptic seizures in the routine of EMUs around the world. We hope this study encourages other EMUs to adopt similar approaches so that more quantitative information is used to improve epilepsy diagnosis.

Automated Detection of Tonic-Clonic Seizures Using 3-D Accelerometry and Surface Electromyography in Pediatric Patients

Epileptic seizure detection is traditionally done using video/electroencephalography monitoring, which is not applicable for long-term home monitoring. In recent years, attempts have been made to detect the seizures using other modalities. In this study, we investigated the application of four accelerometers (ACM) attached to the limbs and surface electromyography (sEMG) electrodes attached to upper arms for the detection of tonic-clonic seizures. sEMG can identify the tension during the tonic phase of tonic-clonic seizure, while ACM is able to detect rhythmic patterns of the clonic phase of tonic-clonic seizures. Machine learning techniques, including feature selection and least-squares support vector machine classification, were employed for detection of tonic-clonic seizures from ACM and sEMG signals. In addition, the outputs of ACM and sEMG-based classifiers were combined using a late integration approach. The algorithms were evaluated on 1998.3 h of data recorded nocturnally in 56 patients of which seven had 22 tonic-clonic seizures. A multimodal approach resulted in a more robust detection of short and nonstereotypical seizures (91%), while the number of false alarms increased significantly compared with the use of single sEMG modality (0.28-0.5/12h). This study also showed that the choice of the recording system should be made depending on the prevailing pediatric patient-specific seizure characteristics and nonepileptic behavior.

A wearable inertial measurement unit for long-term monitoring in the dependency care area

Human movement analysis is a field of wide interest since it enables the assessment of a large variety of variables related to quality of life. Human movement can be accurately evaluated through Inertial Measurement Units (IMU), which are wearable and comfortable devices with long battery life. The IMU's movement signals might be, on the one hand, stored in a digital support, in which an analysis is performed a posteriori. On the other hand, the signal analysis might take place in the same IMU at the same time as the signal acquisition through online classifiers. The new sensor system presented in this paper is designed for both collecting movement signals and analyzing them in real-time. This system is a flexible platform useful for collecting data via a triaxial accelerometer, a gyroscope and a magnetometer, with the possibility to incorporate other information sources in real-time. A μSD card can store all inertial data and a Bluetooth module is able to send information to other external devices and receive data from other sources. The system presented is being used in the real-time detection and analysis of Parkinson's disease symptoms, in gait analysis, and in a fall detection system.