Synthesis and characterization of monodisperse silica colloids loaded with superparamagnetic iron oxide nanoparticles

Optimized Synthesis and Stabilization of Superparamagnetic Iron Oxide Nanoparticles for Enhanced Biomolecule Adsorption

Monodisperse and colloidally stable magnetic iron oxide nanoparticles have been developed for diverse biotechnology applications. Although promising for the adsorption of organic molecules, the low density of adsorption sites in these nanoparticles has been a significant challenge. In this study, an optimized factorial design with response surface methodology (RSM) was employed to produce small Superparamagnetic Iron Oxide Nanoparticles (SPIONs) stabilized with tetraethoxysilane (TEOS). Bovine Serum Albumin (BSA) was selected for immobilization on the surface of SPIONs to test adsorption capacity. The model was validated by correlating significant factors with experimental responses, enabling the prediction of the smallest nanoparticle size. We obtained superparamagnetic SPIONs (75.12 emu/g) with high surface area and an average diameter of 11.06 ± 0.84 nm, with stability improved by the adsorption of TEOS (-46.24 mV) and suitable for pH values from 2 to 10 and salt concentrations up to 1 M. The maximum adsorption capacity of the nanoparticles was 87.8 ± 1.79 mg of BSA per gram of nanoparticles. The nanomaterial synthesized here presents a favorable platform for anchoring protein molecules via silanol groups on its electrostatically charged surface. This study introduces an effective strategy for the synthesis and stabilization of SPIONs with potential biotechnology applications.

The effect of nanoparticle coating on biological, chemical and biophysical parameters influencing radiosensitization in nanoparticle-aided radiation therapy

Nanoparticle-based composites have the potential to meet requirements for radiosensitization in both therapeutic and diagnostic applications. The radiosensitizing properties of nanoparticles could be reliant on the nature of their coating layer. Any gains in reduced toxicity and aggregation or improved delivery to tumor cells for coated nanoparticles must be weighed against the loss of dose enhancement. The radiosensitization potential of coated NPs is confirmed by numerous studies but in most of them, the coating layer is mostly applied to reduce toxicity of the NPs and for stability and biocompatibility aims. While the direct effects of the coating layer in radiosensitization-were ignored and not considered. This review provides an overview of double-edged impact of nanoparticle coating on the radiosensitization potential of nanostructures and discusses the challenges in choosing appropriate coating material in the aim of achieving improved radioenhancement. Coating layer could affect the radiosensitization processes and thereby the biological outcomes of nanoparticle-based radiation therapy. The physicochemical properties of the coating layer can be altered by the type of the coating material and its thickness. Under low-energy photon irradiation, the coating layer could act as a shield for nanoparticles capable of absorb produced low-energy electrons which are important levers for local and nanoscopic dose enhancement. Also, it seems that the coating layer could mostly affect the chemical process of ROS production rather than the physicochemical process. Based on the reviewed literature, for the irradiated coated nanoparticles, the cell survival and viability of cancer cells are decreased more than normal cells. Also, cell cycle arrest, inhibition of cell proliferation, DNA damage, cell death and apoptosis were shown to be affected by coated metallic nanoparticles under irradiation.

Iron Oxide@Mesoporous Silica Core-Shell Nanoparticles as Multimodal Platforms for Magnetic Resonance Imaging, Magnetic Hyperthermia, Near-Infrared Light Photothermia, and Drug Delivery

The design of core-shell nanocomposites composed of an iron oxide core and a silica shell offers promising applications in the nanomedicine field, especially for developing efficient theranostic systems which may be useful for cancer treatments. This review article addresses the different ways to build iron oxide@silica core-shell nanoparticles and it reviews their properties and developments for hyperthermia therapies (magnetically or light-induced), combined with drug delivery and MRI imaging. It also highlights the various challenges encountered, such as the issues associated with in vivo injection in terms of NP-cell interactions or the control of the heat dissipation from the core of the NP to the external environment at the macro or nanoscale.

Approaches on Ferrofluid Synthesis and Applications: Current Status and Future Perspectives

Ferrofluids are colloidal suspensions of iron oxide nanoparticles (IONPs) within aqueous or nonaqueous liquids that exhibit strong magnetic properties. These magnetic properties allow ferrofluids to be manipulated and controlled when exposed to magnetic fields. This review aims to provide the current scope and research opportunities regarding the methods of synthesis of nanoparticles, surfactants, and carrier liquids for ferrofluid production, along with the rheology and applications of ferrofluids within the fields of medicine, water treatment, and mechanical engineering. A ferrofluid is composed of IONPs, a surfactant that coats the magnetic IONPs to prevent agglomeration, and a carrier liquid that suspends the IONPs. Coprecipitation and thermal decomposition are the main methods used for the synthesis of IONPs. Despite the fact that thermal decomposition provides precise control on the nanoparticle size, coprecipitation is the most used method, even when the oxidation of iron can occur. This oxidation alters the ratio of maghemite/magnetite, influencing the magnetic properties of ferrofluids. Strategies to overcome iron oxidation have been proposed, such as the use of an inert atmosphere, adjusting the Fe(II) and Fe(III) ratio to 1:2, and the exploration of other metals with the oxidation state +2. Surfactants and carrier liquids are chosen according to the ferrofluid application to ensure stability. Hence, a compatible carrier liquid (polar or nonpolar) is selected, and then, a surfactant, mainly a polymer, is embedded in the IONPs, providing a steric barrier. Due to the variety of surfactants and carrier liquids, the rheological properties of ferrofluids are an important response variable evaluated when synthesizing ferrofluids. There are many reported applications of ferrofluids, including biosensing, medical imaging, medicinal therapy, magnetic nanoemulsions, and magnetic impedance. Other applications include water treatment, energy harvesting and transfer, and vibration control. To progress from synthesis to applications, research is still ongoing to ensure control of the ferrofluids' properties.

Renaissance of Stöber method for synthesis of colloidal particles: New developments and opportunities

Colloidal silica particles have received a widespread interest because of their potential applications in adsorption, ceramics, catalysis, drug delivery and more. Among many approaches towards fabrication of these colloidal particles, Stöber, Fink and Bohn (SFB) method, known as Stöber synthesis is an effective sol-gel strategy for production of uniform, monodispersed silica particles with highly tailorable size and surface properties. This review, after a brief introduction showing the importance of colloidal chemistry, is focused on the Stöber synthesis of silica spheres including discussion of the key factors affecting their particle size, porosity and surface properties. Next, further developments of this method are presented toward fabrication of polymer, carbon, and composite spheres.

Multifunctional Magnetic Oxide Nanoparticle (MNP) Core-Shell: Review of Synthesis, Structural Studies and Application for Wastewater Treatment

The demand for water is predicted to increase significantly over the coming decades; thus, there is a need to develop an inclusive wastewater decontaminator for the effective management and conservation of water. Magnetic oxide nanocomposites have great potentials as global and novel remediators for wastewater treatment, with robust environmental and economic gains. Environment-responsive nanocomposites would offer wide flexibility to harvest and utilize massive untapped natural energy sources to drive a green economy in tandem with the United Nations Sustainable Development Goals. Recent attempts to engineer smart magnetic oxide nanocomposites for wastewater treatment has been reported by several researchers. However, the magnetic properties of superparamagnetic nanocomposite materials and their adsorption properties nexus as fundamental to the design of recyclable nanomaterials are desirable for industrial application. The potentials of facile magnetic recovery, ease of functionalization, reusability, solar responsiveness, biocompatibility and ergonomic design promote the application of magnetic oxide nanocomposites in wastewater treatment. The review makes a holistic attempt to explore magnetic oxide nanocomposites for wastewater treatment; futuristic smart magnetic oxides as an elixir to global water scarcity is expounded. Desirable adsorption parameters and properties of magnetic oxides nanocomposites are explored while considering their fate in biological and environmental media.

Silica-Coated Magnetic Iron Oxide Nanoparticles Grafted onto Graphene Oxide for Protein Isolation

In this study, silica-coated magnetic iron oxide nanoparticles (MNPs@SiO2) were covalently conjugated onto graphene oxide (GO/MNP@SiO2) for protein isolation. First, MNPs were precisely coated with a silica layer on the surface by using the reverse microemulsion method, followed by incubation with 3-glycidyloxypropyltrimethoxysilane (GPTS) to produce the GPTS-functionalized MNPs@SiO2 (GPTS-coated MNPs@SiO2) that display epoxy groups on the surface. The silica shell on the MNPs was optimized at 300 µL of Igepal®CO-520, 5 mg of MNP, 100 µL of TEOS, 100 µL of NH4OH and 3% of 3-glycidyloxypropyltrimethoxysilane (GPTS). Simultaneously, polyethyleneimine (PEI) was covalently conjugated to GO to enhance the stability of GO in aqueous solutions and create the reaction sites with epoxy groups on the surface of GPTS-coated MNP@SiO2. The ratio of PEI grafted GO and GPTS-coated MNP@SiO2 (GO/MNP ratio) was investigated to produce GO/MNPs@SiO2 with highly saturated magnetization without aggregation. As a result, the GO/MNP ratio of 5 was the best condition to produce the GO/MNP@SiO2 with 9.53 emu/g of saturation superparamagnetization at a magnetic field of 2.0 (T). Finally, the GO/MNPs@SiO2 were used to separate bovine serum albumin (BSA) to investigate its protein isolation ability. The quantity of BSA adsorbed onto 1 mg of GO/MNP@SiO2 increased sharply over time to reach 628 ± 9.3 µg/mg after 15 min, which was 3.5-fold-higher than that of GPTS-coated MNP@SiO2. This result suggests that the GO/MNP@SiO2 nanostructure can be used for protein isolation.

Reversible exchange of wetting state of a hydrophobic surface via phase change material coating

Reversible exchange of the wetting state of a hydrophobic surface is examined. Solution crystallization of a polycarbonate surface is carried out to form hierarchically distributed micro/nano size spherules and fibrils on the surface. Although the solution crystallized surface has hydrophobic characteristics, the contact angle hysteresis remains high. Functionalized silica particles are deposited on the crystallized polycarbonate surface to improve the droplet contact angle and lower contact angle hysteresis. The liquid film of n-octadecane with 1.5 μm thickness is formed on the functionalized silica particles deposited crystallized surface, which results in hydrophilic surface characteristics. The n-octadecane film solidifies upon reducing the temperature on the surface and solid flakes of n-octadecane are formed. This arrangement changes the surface wetting state to hydrophobic. Liquefaction and solidifying of the n-octadecane film at the functionalized silica deposited surface gives rise to reversible exchange of surface wetting state. This behavior is attributed to exposure of emerging functionalized silica particles to the free surface in the region of the solid n-octadecane flakes. The water droplet is cloaked by the liquid n-octadecane while forming a ridge around the droplet. In this case, the water droplet becomes mobile at the surface because flow develops in the n-octadecane liquid film at the onset of liquefaction.

An Optical Tweezers Platform for Single Molecule Force Spectroscopy in Organic Solvents

Observation at the single molecule level has been a revolutionary tool for molecular biophysics and materials science, but single molecule studies of solution-phase chemistry are less widespread. In this work we develop an experimental platform for solution-phase single molecule force spectroscopy in organic solvents. This optical-tweezer-based platform was designed for broad chemical applicability and utilizes optically trapped core-shell microspheres, synthetic polymer tethers, and click chemistry linkages formed in situ. We have observed stable optical trapping of the core-shell microspheres in ten different solvents, and single molecule link formation in four different solvents. These experiments demonstrate how to use optical tweezers for single molecule force application in the study of solution-phase chemistry.

Fe3O4@SiO2 core-shell nanoparticles for biomedical purposes: adverse effects on blood cells

Magnetite nanoparticles coated with silica, obtained by a sol-gel process in the reverse micelle microemulsion, were characterized and homogeneously suspended in water in order to assay their biocompatibility toward blood cells, in view of a potential medical use of this material. Their hemolytic, pro-thrombotic and pro-inflammatory properties were observed.

Role of functionalization: strategies to explore potential nano-bio applications of magnetic nanoparticles

Strategies to bridge the gap between magnetic nanoparticles for their nano bio applications.

Molecular insights into the selective action of a magnetically removable complexone-grafted adsorbent

The IDA–RE³⁺ complexation of RE³⁺ on the surface of a hybrid silica adsorbent occurs under neutral or weakly acidic conditions apparently not via chelation but via the concerted action of the negatively charged carboxylate oxygen atoms, opening the possibility for enhanced selectivity.

Toxicity evaluation following intratracheal instillation of iron oxide in a silica matrix in rats

Iron oxide-silica nanoparticles (IOSi-NPs) were prepared from a mixture of ferrous chloride tetrahydrate and ferric chloride hexahydrate dropped into a silica xerogel composite. The structure and morphology of the synthesized maghemite nanoparticles into the silica xerogel were analysed by X-ray diffraction measurements, scanning electron microscopy equipped with an energy dispersive X-ray spectrometer, and transmission electron microscopy. The results of the EDAX analysis indicated that the embedded particles were iron oxide nanoparticles. The particle size of IOSi-NPs calculated from the XRD analysis was estimated at around 12.5 nm. The average size deduced from the particle size distribution is 13.7 ± 0.6 nm, which is in good agreement with XRD analysis. The biocompatibility of IOSi-NPs was assessed by cell viability and cytoskeleton analysis. Histopathology analysis was performed after 24 hours and 7 days, respectively, from the intratracheal instillation of a solution containing 0.5, 2.5, or 5 mg/kg IOSi-NPs. The pathological micrographs of lungs derived from rats collected after the intratracheal instillation with a solution containing 0.5 mg/kg and 2.5 mg/kg IOSi-NPs show that the lung has preserved the architecture of the control specimen with no significant differences. However, even at concentrations of 5 mg/kg, the effect of IOSi-NPS on the lungs was markedly reduced at 7 days posttreatment.

Porous carbon protected magnetite and silver hybrid nanoparticles: morphological control, recyclable catalysts, and multicolor cell imaging

A simple and facile synthetic strategy is developed to prepare a new class of multifunctional hybrid nanoparticles (NPs) that can integrate a magnetic core with silver nanocrystals embedded in porous carbon shell. The method involves a one-step solvothermal synthesis of Fe3O4@C template NPs with Fe3O4nanocrystals in the core protected by a porous carbon shell, followed by loading and in situ reduction of silver ions in the carbon shell in water at room temperature. The core-satellite and dumbbell-like nanostructures of the resulted Fe3O4@C-Ag hybrid NPs can be readily controlled by loading amount of silver ions. The hybrid NPs can efficiently catalyze the reduction reaction of organic dyes in water. The easy magnetic separation and high stability of the catalytically active silver nanocrystals embedded in the carbon shell enable the hybrid NPs to be recycled for reuse as catalysts. The hybrid NPs can also overcome cellular barriers to enter the intracellular region and light up the mouse melanoma B16F10 cells in multicolor modal, with no cytotoxicity. Such porous carbon protected Fe3O4@C-Ag hybrid NPs with controllable nanostructures and a combination of magnetic and noble metallic components have great potential for a broad range of applications in the catalytic industry and biomedical field.

Biocompatible magnetite nanoparticles with varying silica-coating layer for use in biomedicine: physicochemical and magnetic properties, and cellular compatibility

Magnetic nanoparticles (MNPs) are considered highly useful in therapeutic and diagnostic applications. However, MNPs require surface modification to promote dispersibility in aqueous solutions and thus biocompatibility. In this article, the authors modified MNPs with inorganic silica layer to create silica-coated magnetite nanoparticles (MNP@Si) via sol-gel process. Synthesis involves hydrolysis and condensation steps using tetraethylorthosilicate (TEOS) in methanol/ polyethylene glycol (PEG) solution and ammonia catalyst. Nanoparticles were characterized in terms of morphology, particle size, crystalline phase, chemical-bond structure, surface charge and magnetic properties: in particular, the MNP@Si size was easily tunable through alteration of the Fe(3) O(4) -to-TEOS ratio. As this ratio increased, the MNP@Si size decreased from 270 to 15 nm whilst maintaining core 12-nm MNP particle size, indicating decrease in thickness of the silica coating. All MNP@Si, in direct contrast to uncoated MNPs, showed excellent stability in aqueous solution. The particles' physicochemical and magnetic properties systematically varied with size (coating thickness), and the zeta potential diminished toward negative values, while magnetization increased as the coating thickness decreased. 15-nm MNP@Si showed excellent magnetization (about 64.1 emu/g), almost comparable to that of uncoated MNPs (70.8 emu/g). Preliminary in vitro assays confirmed that the silica layer significantly reduced cellular toxicity as assessed by increase in cell viability and reduction in reactive oxygen species production during 48 h of culture. Newly-developed MNP@Si, with a high capacity for magnetization, water-dispersibility, and diminished cell toxicity, may be potentially useful in diverse biomedical applications, including delivery of therapeutic and diagnostic biomolecules.

Efficient internalization of silica-coated iron oxide nanoparticles of different sizes by primary human macrophages and dendritic cells

Engineered nanoparticles are being considered for a wide range of biomedical applications, from magnetic resonance imaging to "smart" drug delivery systems. The development of novel nanomaterials for biomedical applications must be accompanied by careful scrutiny of their biocompatibility. In this regard, particular attention should be paid to the possible interactions between nanoparticles and cells of the immune system, our primary defense system against foreign invasion. On the other hand, labeling of immune cells serves as an ideal tool for visualization, diagnosis or treatment of inflammatory processes, which requires the efficient internalization of the nanoparticles into the cells of interest. Here, we compare novel monodispersed silica-coated iron oxide nanoparticles with commercially available dextran-coated iron oxide nanoparticles. The silica-coated iron oxide nanoparticles displayed excellent magnetic properties. Furthermore, they were non-toxic to primary human monocyte-derived macrophages at all doses tested whereas dose-dependent toxicity of the smaller silica-coated nanoparticles (30nm and 50nm) was observed for primary monocyte-derived dendritic cells, but not for the similarly small dextran-coated iron oxide nanoparticles. No macrophage or dendritic cell secretion of pro-inflammatory cytokines was observed upon administration of nanoparticles. The silica-coated iron oxide nanoparticles were taken up to a significantly higher degree when compared to the dextran-coated nanoparticles, irrespective of size. Cellular internalization of the silica-coated nanoparticles was through an active, actin cytoskeleton-dependent process. We conclude that these novel silica-coated iron oxide nanoparticles are promising materials for medical imaging, cell tracking and other biomedical applications.

Repetitive heterocoagulation of oppositely charged particles for enhancement of magnetic nanoparticle loading into monodisperse silica particles

Oppositely charged particles were repetitively heterocoagulated to fabricate highly monodisperse magnetic silica particles with high loading of magnetic nanoparticles. Positively charged magnetic nanoparticles prepared by surface modification with N-trimethoxysilylpropyl-N,N,N-trimethylammonium chloride (TSA) were used to heterocoagulate with silica particles under basic conditions to give rise to negative silica surface charge and prevent the oxidation of the magnetic nanoparticles. The resultant particles of silica core homogeneously coated with the magnetic nanoparticles were further coated with thin silica layer with sodium silicate in order to enhance colloidal stability and avoid desorption of the magnetic nanoparticles from the silica cores. Five repetitions of the heterocoagulation and the silica coating could increase saturation magnetization of the magnetic silica particles to 27.7 emu/g, keeping the coefficient of variation of particle sizes (C(V)) less than 6.5%. Highly homogeneous loading of the magnetic component was confirmed by measuring Fe-to-Si atomic ratios of individual particles with energy dispersive X-ray spectroscopy.

Superparamagnetic Fe3O4SiO2 nanocomposites: enabling the tuning of both the iron oxide load and the size of the nanoparticles

Using a water-in-oil microemulsion system, silica nanoparticles containing superparamagnetic iron oxide (SPIO) crystals have been prepared and characterized. With this method, the loading of iron oxide crystals, the thickness of the silica shells, and the overall particle sizes are tunable. Moving from low to high water concentration, within the microemulsion region, resulted in a gradual shift from larger particles, ca. 100 nm and fully loaded with SPIOs, to smaller particles, ca. 30 nm containing only one or a few SPIOs. By varying the amount of silica precursor, the thickness of the silica shell was altered. Field dependent magnetization measurements showed the magnetic properties of the SPIOs were preserved after the synthesis.

Synthesis and characterization of monodisperse ultra-thin silica-coated magnetic nanoparticles

A systematic study of the formation of silica-coated magnetite particles via a modified reverse microemulsion approach was investigated by using transmission electron microscopy (TEM), x-ray diffraction (XRD) and a superconducting quantum interference device (SQUID). The results show that the surfactant Igepal CO-520 played an important role in the reaction system, and the thickness of the silica shell could be controlled by the concentration of the reaction agents. The developed ultra-thin silica-coated magnetic particles with a ∼2 nm thin silica shell have a high saturated magnetization around 15 emu g(-1).

Direct formation of thermally stabilized amorphous mesoporous Fe2O3/SiO2 nanocomposites by hydrolysis of aqueous iron III nitrate in sols of spherical silica particles

Nanocomposite materials containing 10% and 20% iron oxide/silica, Fe2O3/SiO2 (w/w), were prepared by direct hydrolysis of aqueous iron III nitrate solution in sols of freshly prepared spherical silica particles (Stöber particles) present in their mother liquors. This was followed by aging, drying, calcination up to 600 degrees C through two different ramp rates, and then isothermal calcinations at 600 degrees C for 3 h. The calcined and the uncalcined (dried at 120 degrees C) composites were characterized by thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction (XRD), N2 adsorption/desorption techniques, and scanning electron microscopy as required. XRD patterns of the calcined composites showed no line broadening at any d-spacing positions of iron oxide phases, thereby reflecting the amorphous nature of Fe2O3 in the composite. The calcined composites showed nitrogen adsorption isotherms characterizing type IV isotherms with high surface area. Moreover, surface area increased with the increasing of the iron oxide ratio and lowering of the calcination ramp rate. Results indicated that iron oxide particles were dispersed on the exterior of silica particles as isolated and/or aggregated nanoparticles. The formation of the title composite was discussed in terms of the hydrolysis and condensation mechanisms of the inorganic FeIII precursor in the silica sols. Thereby, fast nucleation and limited growth of hydrous iron oxide led to the formation of nanoparticles that spread interactively on the hydroxylated surface of spherical silica particles. Therefore, a nanostructured composite of amorphous nanoparticles of iron oxide (as a shell) spreading on the surface of silica particles (as a core) was formed. This morphology limited the aggregation of Fe2O3 nanoparticles, prevented silica particle coalescence at high temperatures, and enhanced thermal stability.

Colloidal building blocks with potential for magnetically configurable photonic crystals

This contribution highlights some recent advances in the synthesis of monodispersed colloidal spheres loaded with superparamagnetic components for external manipulation. We firstly discuss how FeO nanoparticles can be directly coated with silica to form core-shell particles using a sol-gel approach. We then focus on the demonstration of new materials for such an application, with Pb and amorphous Se as the typical examples of metals and semiconductors, respectively. We also illustrate how colloidal spheres of amorphous Se can be converted into AgSe and then MSe (M = Zn, Cd, and Pb) without changing the spherical shape. Combined together, these synthetic methods could enable the synthesis of monodispersed colloidal spheres with controlled size, smooth surface, and superparamagnetic features for fabricating photonic crystals whose band structures can be configured using an external magnetic field.