Structural and electronic properties of M-MOF-74 (M = Mg, Co or Mn)

Highly Efficient Numerical Method for Modeling Mofs Containing Transition Metal Ions

Employing a group-function based semiempirical approach, a new program packageΣHΘΩ $$ \varSigma H\varTheta \varOmega $$ (seethoo), targeted to modeling of metal-organic frameworks (MOFs) containing transition metal ions (TMIs) with open d-shells is developed. In this proof of concept study it is shown that theΣHΘΩ $$ \varSigma H\varTheta \varOmega $$ package has potential to accurately compute d-shell low-spin (LS) -high-spin (HS) gaps and charge distributions in MOFs inO N 1 . 33 $$ O\left({N}^{1.33}\right) $$ time with reasonable accuracy. The calculations were carried out for a variety of MOFs and MOF-like systems containing doubly and triply charged Mn, Fe, Co and Ni ions. For Fe-containing systems, parameters of57 Fe $$ {}^{57}\mathrm{Fe} $$ Mössbauer spectra were also computed. For the test runs, the results reasonably agree with available experimental data up to errors introduced by use of the CNDO parametrization in the test manner.

Comprehensive DFT investigation of small-molecule adsorption on the paradigm M-MOF-74 family of metal-organic frameworks

The capture of toxic chemicals such as NH3, H2S, NO2 and SO2 is essential due to the tremendous threats they pose to human health and the environment. The M-MOF-74 family of metal-organic frameworks has recently gained attention as a promising category of sorbent materials for the capture of toxic chemicals; however, no clear and comprehensive relationships have been established between the capability of the M-MOF-74 to capture all target toxic chemicals and their properties such as the nature and magnetic state of the metal sites. Density-functional theory (DFT) is employed to investigate the binding energy of target molecules on M-MOF-74 with different metals including Mg, Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn. The Hubbard U correction is employed to properly treat d electrons of transition metals and its effect explored on the bandgap of M-MOF-74. The magnetic properties of M-MOF-74 are investigated in detail along with their impact on the target molecule adsorption. Our calculations with DFT+U lead to good agreement with available experimentally determined bandgaps and structural properties. M-MOF-74 (M = Ti, V, Cr, Mn, Fe, Co and Cu) exhibit antiferromagnetic behavior, while ferromagnetic behavior prevails for Ni-MOF-74. Not surprisingly, the coordinatively unsaturated metals (M = Mg, Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn) are the most likely sites for chemical adsorption of the target adsorbates, and V-MOF-74 and Ti-MOF-74 predicted to be efficient adsorbents for the target molecules, which can be rationalized on the basis of the metal d-band features. The spin configuration of transition metals in M-MOF-74 is found to have a negligible effect on adsorbate binding energies, which suggests that common DFT calculations without careful consideration of the material magnetic states can indeed be used to rapidly screen binding energies of adsorbates on such MOFs, with some notable exceptions; for instance, V-MOF-74 shows potential for magnetic sensing of NO2. This study provides further insight into the role of different unsaturated metals and their magnetic state for the removal of target toxic molecules by metal-organic frameworks.

Tris(triazolo)triazine-Based Covalent Organic Frameworks for Efficiently Photocatalytic Hydrogen Peroxide Production

Two-dimensional covalent organic frameworks (2D-COFs) have recently emerged as fascinating scaffolds for solar-to-chemical energy conversion because of their customizable structures and functionalities. Herein, two tris(triazolo)triazine-based COF materials (namely COF-JLU51 and COF-JLU52) featuring large surface area, high crystallinity, excellent stability and photoelectric properties were designed and constructed for the first time. Remarkably, COF-JLU51 gave an outstanding H2O2 production rate of over 4200 μmol g-1 h-1 with excellent reusability in pure water and O2 under one standard sun light, that higher than its isomorphic COF-JLU52 and most of the reported metal-free materials, owing to its superior generation, separation and transport of photogenerated carriers. Experimental and theoretical researches prove that the photocatalytic process undergoes a combination of indirect 2e- O2 reduction reaction (ORR) and 4e- H2O oxidation reaction (WOR). Specifically, an ultrahigh yield of 7624.7 μmol g-1 h-1 with apparent quantum yield of 18.2 % for COF-JLU52 was achieved in a 1 : 1 ratio of benzyl alcohol and water system. This finding contributes novel, nitrogen-rich and high-quality tris(triazolo)triazine-based COF materials, and also designate their bright future in photocatalytic solar transformations.

Experimental and theoretical structural investigation of an ionic Nd coordination polymer

Research concerning coordination polymers has been intense due to their significant variability and structural stability. With this in mind, an ionic neodymium coordination polymer was synthesized, composed of an anionic one-dimensional polymer interconnected to a cationic three-dimensional porous polymer, poly[dodecaaquabis(μ-pyridine-4-carbohydrazide-κ2N:O)bis(μ2-4-sulfobenzoato-κ2O:O')bis(μ3-4-sulfobenzoato-κ3O:O':O'')trineodymium(III)] catena-poly[aquabis(μ-pyridine-4-carbohydrazide-κ2N:O)bis(μ2-4-sulfobenzoato-κ2O:O')neodymium(III)] 4.33-hydrate, {[Nd3(C7H4O5S)4(C6H7N3O)2(H2O)12][Nd(C7H4O5S)2(C6H7N3O)2(H2O)]·4.33H2O}n. The ligands used were 4-sulfobenzoate (PSB) and pyridine-4-carbohydrazide, popularly known as isoniazid (INH), an antibiotic drug. The compound crystallizes in the monoclinic space group C2/c, with Z = 4. Solid-state calculations suggest that the crystal structure is mainly stabilized by hydrogen bonds, i.e. O-H...O and N-H...O interactions among the polymers, and by van der Waals interactions involving the organic side chains. This net is tetragonal, 2-nodal 3,4-connected, and can be described as the dmd (sqc 528) type.

Improving gas adsorption modeling for MOFs by local calibration of Hubbard U parameters

While computational screening with density functional theory (DFT) is frequently employed for the screening of metal-organic frameworks (MOFs) for gas separation and storage, commonly applied generalized gradient approximations (GGAs) exhibit self-interaction errors, which hinder the predictions of adsorption energies. We investigate the Hubbard U parameter to augment DFT calculations for full periodic MOFs, targeting a more precise modeling of gas molecule-MOF interactions, specifically for N2, CO2, and O2. We introduce a calibration scheme for the U parameter, which is tailored for each MOF, by leveraging higher-level calculations on the secondary building unit (SBU) of the MOF. When applied to the full periodic MOF, the U parameter calibrated against hybrid HSE06 calculations of SBUs successfully reproduces hybrid-quality calculations of the adsorption energy of the periodic MOF. The mean absolute deviation of adsorption energies reduces from 0.13 eV for a standard GGA treatment to 0.06 eV with the calibrated U, demonstrating the utility of the calibration procedure when applied to the full MOF structure. Furthermore, attempting to use coupled cluster singles and doubles with perturbative triples calculations of isolated SBUs for this calibration procedure shows varying degrees of success in predicting the experimental heat of adsorption. It improves accuracy for N2 adsorption for cases of overbinding, whereas its impact on CO2 is minimal, and ambiguities in spin state assignment hinder consistent improvements of O2 adsorption. Our findings emphasize the limitations of cluster models and advocate the use of full periodic MOF systems with a calibrated U parameter, providing a more comprehensive understanding of gas adsorption in MOFs.

First-Principles Study on the Selective Separation of Toxic Gases by Mg-MOF-74

This study primarily focused on the detection and separation of toxic gases such as CO, H2S, SO2, NH3, NO, and NO2 by Mg-MOF-74, as well as assessing the stability of those toxic gases on it. The calculations were performed by using density functional theory as implemented in the Gaussian-09 and Quantum ESPRESSO suites of the program. GGA-type PBE-D2 functionals with a plane wave basis set were used in the optimization of the Mg-MOF-74 crystal, and hybrid-type B3LYP and M06 functionals with the 6-31G*basis set were used in cluster calculation. The binding energies of CO and H2S with MOF were found to be in the physisorption range, whereas the energies of SO2, NH3, NO, and NO2 were found to be in the chemisorption range. Based on binding energy, hardness, and softness studies, it was found that NO and NO2 molecules were more stable in Mg-MOF-74, suggesting that Mg-MOF-74 is a good detector for NO and NO2 molecules.

Understanding Carbon Monoxide Binding and Interactions in M-MOF-74 (M = Mg, Mn, Ni, Zn)

Small molecules may adsorb strongly in metal-organic frameworks (MOFs) through interactions with under-coordinated open metal sites (OMS) that often exist within these structures. Among adsorbates, CO is attractive to study both for its relevance in energy-related applications and for its ability to engage in both σ-donation and π-backbonding interactions with the OMS in MOFs. Concomitant with strong adsorption, structural changes arise due to modifications of the electronic structure of both the adsorbate and adsorbent. These structural changes affect the separation performance of materials, and accurately capturing these changes and the resulting energetics is critical for accurate predictive modeling of adsorption. Traditional approaches to modeling using classical force fields typically do not capture or account for changes at the electronic level. To characterize the structural and energetic effects of the local structural changes, we employed density functional theory (DFT) to study CO adsorption in M-MOF-74s. M-MOF-74s feature OMS at which CO is known to adsorb strongly and can be synthesized with a variety of divalent metal cations with distinct performance in adsorption. We considered M-MOF-74s with a range of metals of varied d-band occupations (Mg (3d0), Mn (3d5), Ni (3d8), and Zn (3d10)) with various structural constraints ranging from geometrically constrained adsorbent and adsorbate ions to fully optimized geometries to deconvolute the relative contributions of various structural effects to the adsorption energetics and binding distances observed. Our data indicate that the most significant structural changes during adsorption correlate with the greatest π-backbonding behaviors and commensurately result in a sizable binding energy change observed for CO adsorption. The insights built from this work are relevant to two longstanding research challenges within the MOF community: rational design of materials for separations and the design of force fields capable of accurately modeling adsorption.

Kinetic Trapping of Photoluminescent Frameworks During High-Concentration Synthesis of Non-Emissive Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are porous, crystalline materials constructed from organic linkers and inorganic nodes with potential utility in gas separations, drug delivery, sensing, and catalysis. Small variations in MOF synthesis conditions can lead to a range of accessible frameworks with divergent chemical or photophysical properties. New methods to controllably access phases with tailored properties would broaden the scope of MOFs that can be reliably prepared for specific applications. Herein, we demonstrate that simply increasing the reaction concentration during the solvothermal synthesis of M2(dobdc) (M = Mg, Mn, Ni; dobdc4- = 2,5-dioxido-1,4-benzenedicarboxylate) MOFs unexpectedly leads to trapping of a new framework termed CORN-MOF-1 (CORN = Cornell University) instead. In-depth spectroscopic, crystallographic, and computational studies support that CORN-MOF-1 has a similar structure to M2(dobdc) but with partially protonated linkers and charge-balancing or coordinated formate groups in the pores. The resultant variation in linker spacings causes CORN-MOF-1 (Mg) to be strongly photoluminescent in the solid state, whereas H4dobdc and Mg2(dobdc) are weakly emissive due to excimer formation. In-depth photophysical studies suggest that CORN-MOF-1 (Mg) is the first MOF based on the H2dobdc2- linker that likely does not emit via an excited state intramolecular proton transfer (ESIPT) pathway. In addition, CORN-MOF-1 variants can be converted into high-quality samples of the thermodynamic M2(dobdc) phases by heating in N,N-dimethylformamide (DMF). Overall, our findings support that high-concentration synthesis provides a straightforward method to identify new MOFs with properties distinct from known materials and to produce highly porous samples of MOFs, paving the way for the discovery and gram-scale synthesis of framework materials.

Linkage Microenvironment of Azoles-Related Covalent Organic Frameworks Precisely Regulates Photocatalytic Generation of Hydrogen Peroxide

Artificial H2 O2 photosynthesis by covalent organic frameworks (COFs) photocatalysts is promising for wastewater treatment. The effect of linkage chemistry of COFs as functional basis to photoelectrochemical properties and photocatalysis remains a significant challenge. In this study, three kinds of azoles-linked COFs including thiazole-linked TZ-COF, oxazole-linked OZ-COF and imidazole-linked IZ-COF were successfully synthesized. More accessible channels of charge transfer were constructed in TZ-COF via the donor-π-acceptor structure between thiazole linkage and pyrene linker, leading to efficient suppression of photoexcited charge recombination. Density functional theory calculations support the experimental studies, demonstrating that the thiazole linkage is more favorable for the formation of *O2 intermediate in H2 O2 production than that of the oxazole and imidazole linkages. The real active sites in COFs located at the benzene ring fragment between pyrene unit and azole linkage.

Impedance-Based Detection of NO2 Using Ni-MOF-74: Influence of Competitive Gas Adsorption

Chemically robust, low-power sensors are needed for the direct electrical detection of toxic gases. Metal-organic frameworks (MOFs) offer exceptional chemical and structural tunability to meet this challenge, though further understanding is needed regarding how coadsorbed gases influence or interfere with the electrical response. To probe the influence of competitive gases on trace NO2 detection in a simulated flue gas stream, a combined structure-property study integrating synchrotron powder diffraction and pair distribution function analyses was undertaken, to elucidate how structural changes associated with gas binding inside Ni-MOF-74 pores correlate with the electrical response from Ni-MOF-74-based sensors. Data were evaluated for 16 gas combinations of N2, NO2, SO2, CO2, and H2O at 50 °C. Fourier difference maps from a rigid-body Rietveld analysis showed that additional electron density localized around the Ni-MOF-74 lattice correlated with large decreases in Ni-MOF-74 film resistance of up to a factor of 6 × 103, observed only when NO2 was present. These changes in resistance were significantly amplified by the presence of competing gases, except for CO2. Without NO2, H2O rapidly (<120 s) produced small (1-3×) decreases in resistance, though this effect could be differentiated from the slower adsorption of NO2 by the evaluation of the MOF's capacitance. Furthermore, samples exposed to H2O displayed a significant shift in lattice parameters toward a larger lattice and more diffuse charge density in the MOF pore. Evaluating the Ni-MOF-74 impedance in real time, NO2 adsorption was associated with two electrically distinct processes, the faster of which was inhibited by competitive adsorption of CO2. Together, this work points to the unique interaction of NO2 and other specific gases (e.g., H2O, SO2) with the MOF's surface, leading to orders of magnitude decrease in MOF resistance and enhanced NO2 detection. Understanding and leveraging these coadsorbed gases will further improve the gas detection properties of MOF materials.

Characterizing Grain Boundary Effects on Mg2+ Conduction in Metal-Organic Frameworks

Next-generation materials for fast ion conduction have the potential to revolutionize battery technology. Metal-organic frameworks (MOFs) are promising candidates for achieving this goal. Given their structural diversity, the design of efficient MOF-based conductors can be accelerated by a detailed understanding and accurate prediction of ion conductivity. However, the polycrystalline nature of solid-state materials requires consideration of grain boundary effects, which is complicated by challenges in characterizing grain boundary structures and simulating ensemble transport processes. To address this, we have developed an approach for modeling ion transport at grain boundaries and predicting their contribution to conductivity. Mg²⁺ conduction in the Mg-MOF-74 thin film was studied as a representative system. Using computational techniques and guided by experiments, we investigated the structural details of MOF grain boundary interfaces to determine accessible Mg²⁺ transport pathways. Computed transport kinetics were input into a simplified MOF nanocrystal model, which combines ion transport in the bulk structure and at grain boundaries. The model predicts Mg²⁺ conductivity in the MOF-74 film within chemical accuracy (<1 kcal/mol activation energy difference), validating our approach. Physically, Mg²⁺ conduction in MOF-74 is inhibited by strong Mg²⁺ binding at grain boundaries, such that only a small fraction of grain boundary alignments allow for fast Mg²⁺ transport. This results in a 2-3 order-of-magnitude reduction in conductivity, illustrating the critical impact of the grain boundary contribution. Overall, our work provides a computation-aided platform for molecular-level understanding of grain boundary effects and quantitative prediction of ion conductivity. Combined with experimental measurements, it can serve as a synergistic tool for characterizing the grain boundary composition of MOF-based conductors.

Ideal Adsorbed Solution Theory (IAST) of Carbon Dioxide and Methane Adsorption Using Magnesium Gallate Metal-Organic Framework (Mg-gallate)

Ideal Adsorbed Solution Theory (IAST) is a predictive model that does not require any mixture data. In gas purification and separation processes, IAST is used to predict multicomponent adsorption equilibrium and selectivity based solely on experimental single-component adsorption isotherms. In this work, the mixed gas adsorption isotherms were predicted using IAST calculations with the Python package (pyIAST). The experimental CO2 and CH4 single-component adsorption isotherms of Mg-gallate were first fitted to isotherm models in which the experimental data best fit the Langmuir model. The presence of CH4 in the gas mixture contributed to a lower predicted amount of adsorbed CO2 due to the competitive adsorption among the different components. Nevertheless, CO2 adsorption was more favorable and resulted in a higher predicted adsorbed amount than CH4. Mg-gallate showed a stronger affinity for CO2 molecules and hence contributed to a higher CO2 adsorption capacity even with the coexistence of a CO2/CH4 mixture. Very high IAST selectivity values for CO2/CH4 were obtained which increased as the gas phase mole fraction of CO2 approached unity. Therefore, IAST calculations suggest that Mg-gallate can act as a potential adsorbent for the separation of CO2/CH4 mixed gas.

Quantum Informed Machine-Learning Potentials for Molecular Dynamics Simulations of CO2's Chemisorption and Diffusion in Mg-MOF-74

Among various porous solids for gas separation and purification, metal-organic frameworks (MOFs) are promising materials that potentially combine high CO₂ uptake and CO₂/N₂ selectivity. So far, within the hundreds of thousands of MOF structures known today, it remains a challenge to computationally identify the best suited species. First principle-based simulations of CO₂ adsorption in MOFs would provide the necessary accuracy; however, they are impractical due to the high computational cost. Classical force field-based simulations would be computationally feasible; however, they do not provide sufficient accuracy. Thus, the entropy contribution that requires both accurate force fields and sufficiently long computing time for sampling is difficult to obtain in simulations. Here, we report quantum-informed machine-learning force fields (QMLFFs) for atomistic simulations of CO₂ in MOFs. We demonstrate that the method has a much higher computational efficiency (∼1000×) than the first-principle one while maintaining the quantum-level accuracy. As a proof of concept, we show that the QMLFF-based molecular dynamics simulations of CO₂ in Mg-MOF-74 can predict the binding free energy landscape and the diffusion coefficient close to experimental values. The combination of machine learning and atomistic simulation helps achieve more accurate and efficient in silico evaluations of the chemisorption and diffusion of gas molecules in MOFs.

A Theoretical Perspective to Decipher the Origin of High Hydrogen Storage Capacity in Mn(II) Metal-Organic Framework

Herein, we report a detailed periodic DFT investigation of Mn(II)-based [(Mn₄ Cl)₃ (BTT)₈ ]^3- (BTT^3- =1,3,5-benzenetristetrazolate) metal-organic framework (MOF) to explore various hydrogen binding pockets, nature of MOF…H₂ interactions, magnetic coupling and, H₂ uptake capacity. Earlier experiments found an uptake capacity of 6.9 wt % of H_2, with the heat of adsorption estimated to be ∼10 kJ/mol, which is one among the highest for any MOFs reported. Our calculations unveil different binding sites with computed binding energy varying from -6 to -15 kJ/mol. The binding of H₂ at the Mn²⁺ site is found to be the strongest (site I), with H₂ found to bind Mn²⁺ ion in a η² fashion with a distance of 2.27 Å and binding energy of -15.4 kJ/mol. The bonding analysis performed using NBO and AIM reveal a strong donation of σ (H₂ ) to the d_z ² orbital of the Mn²⁺ ion responsible for such large binding energy. The other binding pockets, such as -Cl (site II) and BTT ligands (site III and IV) were found to be weaker, with the binding energy decreasing in the order I>II>III>IV. The average binding energy computed for these four sites put together is 9.6 kJ/mol, which is in excellent agreement with the experimental value of ∼10 kJ/mol. We have expanded our calculations to compute binding energy for multiple sites simultaneously, and in this model, the binding energy per site was found to decrease as we increased the number of H₂ molecules suggesting electronic and steric factors controlling the overall uptake capacity. The calculated adsorption isotherm using the GCMC method reproduces the experimental observations. Further, the magnetic coupling computed for the unbound MOF reveals moderate ferromagnetic and strong antiferromagnetic coupling within the tetrameric {Mn₄ } unit leading to a three-up-one-down spin configuration as the ground state. These were then coupled ferromagnetically to other tetrameric units in the MOF network. The magnetic coupling was found to alter only marginally upon gas binding, suggesting that both exchange interaction and the spin-states are unlikely to play a role in the H₂ uptake. This is contrary to the O₂ uptake studied lately, where strong dependence on exchange-coupling/spin state was witnessed, suggesting exchange-coupling/magnetic field dependent binding as a viable route for gas separation.

DFT investigations of AgMC7H10N2 (M = Cl, Br, and I) metal organic molecules: NMR, optoelectronic, and transport properties

The full-potential linearized augmented plane wave (FP-LAPW) method was used for the calculation of the structural, nuclear magnetic resonance (NMR), optoelectronic, and thermoelectric properties of AgMC₇H₁₀N₂ (M = Cl, Br, and I) compounds. The calculated wide band gap of AgMC₇H₁₀N₂ (M = Cl, Br, and I) metal organic molecules with the density of states approach were 3.32, 3.29, and 3.10 eV, respectively. The NMR parameters are calculated for the Ag, Cl, Br, I, C, N, O, and H elements. It is found that by decreasing bandgap, the isotropic NMR chemical shielding values of Cl, Br, and I elements increase. The strong hybridization of Ag-4d, Cl-3p, Br-4p, and I-5p states are observed at the top of the valence band. The birefringence and anisotropic properties are observed in the optical spectra with high plasmon energies, and the figure of merit, ZT, of 0.98 for AgCl(C₇H₁₀N₂) compound is found at 300 K. Hence, these compounds are attractive flexible metal organic molecules for optoelectronic and transport applications.

Molecular-Level Insights into Selective Transport of Mg2+ in Metal-Organic Frameworks

Metal-organic frameworks (MOF) are promising media for achieving solid-state Mg2+ conduction and developing a magnesium-based battery. To this end, the chemical behavior and transport properties of an Mg(TFSI)2/DME electrolyte system inside Mg-MOF-74 were studied by density functional theory (DFT). We found that inside the MOF chemical environment, solvent and anion molecules occupy the coordinatively unsaturated open metal sites of Mg-MOF-74, while Mg2+ ions adsorb directly onto the carboxylate group of the MOF organic linker. These predicted binding geometries were further corroborated by IR spectroscopy. We computed the free energies of desolvation of Mg2+ ions inside MOF to investigate the capacity of Mg-MOF-74 thin film to act as a separator for selective Mg2+ transport. We showed that Mg-MOF-74 could facilitate partial, but not full, desolvation of Mg2+. We found that the dominant minimum-energy pathway (MEP) for Mg2+ conduction inside Mg-MOF-74 corresponds to a "solvent hopping" mechanism, with an energy barrier of 4.4 kcal/mol. The molar conductivity of Mg2+ associated with the idealized solvent hopping mechanism along the MOF one-dimensional channel was predicted to be 2.4 × 10-3 S cm-1 M-1, which is one to two orders of magnitude greater than the experimentally measured value of 1.2 × 10-4 S cm-1 M-1 (with an estimated Mg2+ concentration). We have discussed several possible factors contributing to this apparent discrepancy. The current work demonstrates the validity of the computational strategies applied and the structural models constructed for the understanding of fast and selective Mg2+ transport in Mg-MOF-74, which serves as a cornerstone for studying transport of multivalent ions in MOFs. Furthermore, it provides detailed molecular-level insights that are not yet accessible experimentally.

Theoretical evaluation of the performance of IRMOFs and M-MOF-74 in the formation of 5-fluorouracil@MOF

Drug delivery systems are a viable resource to be used in medical treatments that tend to be very aggressive to patients, increasing the bioavailability. In this context, porous structures such as MOFs emerge as promising for this type of application, in which a specific drug is adsorbed onto the structure for further release. MOFs such as IRMOFs and M-MOF-74 are investigated in many applications, including use as a drug carrier. In this work, the Monte Carlo grand canonical simulation was used for obtaining insights on the behaviour of 5-fluorouracil adsorption on IRMOF-1, IRMOF-8, IRMOF-10, Mg-MOF74, Fe-MOF74, Cu-MOF74 and Zn-MOF74. We have evaluated the influence of the adsorption of changing organic and inorganic units, which resulted in different chemical environments. It was seen that the drug interacts more efficiently with M-MOF-74, where the metallic centre plays an important role. For IRMOFs, a larger pore volume increases the amount of adsorbed molecules. This effect is mainly due to the contribution of the efficient interaction between 5-fluorouracil molecules.

Drug delivery systems are a viable resource to be used in medical treatments that tend to be very aggressive to patients, increasing the bioavailability.

Investigation on the optical nonlinearity of the layered magnesium-mediated metal organic framework (Mg-MOF-74)

The wavelength-related optical nonlinearities of few-layer Mg-MOF-74 nanosheets were investigated in the wavelength region around 1.08, 1.94, and 2.85 μm by the closed aperture Z-scan, open aperture Z-scan and I-scan method. Under the excitation of 100-μJ laser pulses, the nonlinear refractive index (n₂) of -7.7 ± 2.6, -131 ± 5 and 4.9 ± 0.2 cm²/W were obtained, respectively. The wavelength-related optical nonlinearity of the Mg-MOF-74 nanosheet was also investigated. In 2.85 μm wavelength region, the Mg-MOF-74 nanosheets shows a stable saturable absorption property with a modulation depth of 8% and a saturation intensity of 170 mJ/cm². In the 1.08 and 1.94 μm wavelength regions, we can observe that the Mg-MOF-74 transits from saturable absorption regime to reverse saturable absorption regime with the increasing incident laser intensity. Employed as a saturable absorber in a Er:Lu₂O₃ laser, Mg-MOF-74 nanosheet shows a thickness-related laser modulation performance. The shortest laser pulse of 284-ns was achieved under a repetition rate of 116 kHz with a 6-nm-thick Mg-MOF-74 nanosheet, which corresponds to a pulse energy of 3.2 µJ and a peak power of 11.4 W.

Modeling Adsorption and Optical Properties for the Design of CO2 Photocatalytic Metal-Organic Frameworks

Four Metal-Organic Frameworks (MOFs) were modeled (IRMOF-C-BF2, IRMOF-C-(2)-BF2, IRMOF-C'-BF2, and IRMOF-C-CH2BF2) based on IRMOF-1. A series of linkers, based on Frustrated Lewis Pairs and coumarin moieties, were attached to IRMOF-1 to obtain MOFs with photocatalytic properties. Four different linkers were used: (a) a BF2 attached to a coumarin moiety at position 3, (b) two BF2 attached to a coumarin moiety in positions 3 and 7, (c) a BF2 attached in the coumarin moiety at position 7, and (d) a CH2BF2 attached at position 3. An analysis of the adsorption properties of H2, CO2, H2O and possible CO2 photocatalytic capabilities was performed by means of computational modeling using Density Functional Theory (DFT), Time-Dependent Density Functional (TD-DFT) methods, and periodic quantum chemical wave function approach. The results show that the proposed linkers are good enough to improve the CO2 adsorption, to hold better bulk properties, and obtain satisfactory optical properties in comparison with IRMOF-1 by itself.

Electronic Structure Modeling of Metal-Organic Frameworks

Owing to their molecular building blocks, yet highly crystalline nature, metal-organic frameworks (MOFs) sit at the interface between molecule and material. Their diverse structures and compositions enable them to be useful materials as catalysts in heterogeneous reactions, electrical conductors in energy storage and transfer applications, chromophores in photoenabled chemical transformations, and beyond. In all cases, density functional theory (DFT) and higher-level methods for electronic structure determination provide valuable quantitative information about the electronic properties that underpin the functions of these frameworks. However, there are only two general modeling approaches in conventional electronic structure software packages: those that treat materials as extended, periodic solids, and those that treat materials as discrete molecules. Each approach has features and benefits; both have been widely employed to understand the emergent chemistry that arises from the formation of the metal-organic interface. This Review canvases these approaches to date, with emphasis placed on the application of electronic structure theory to explore reactivity and electron transfer using periodic, molecular, and embedded models. This includes (i) computational chemistry considerations such as how functional, k-grid, and other model variables are selected to enable insights into MOF properties, (ii) extended solid models that treat MOFs as materials rather than molecules, (iii) the mechanics of cluster extraction and subsequent chemistry enabled by these molecular models, (iv) catalytic studies using both solids and clusters thereof, and (v) embedded, mixed-method approaches, which simulate a fraction of the material using one level of theory and the remainder of the material using another dissimilar theoretical implementation.

Investigating greenhouse gas adsorption in MOFs SIFSIX-2-Cu, SIFSIX-2-Cu-i, and SIFSIX-3-Cu through computational studies

The selective adsorption of CO₂ in mixture with other greenhouse gases by porous materials is challenging and it has several consequences from the environmental and economic point of view. We carried out DFT calculations with periodic boundary conditions and plane waves basis set to better understand the adsorption of CO₂, CO, CH₄, N₂, O₂, and H₂ within the pore of the metal-organic frameworks (MOFs) SIFSIX-2-Cu, SIFSIX-2-Cu-i, and SIFSIX-3-Cu. These porous materials have a copper ion coordinated to an organic linker and the inorganic SiF₆^2- pillar, and they show a remarkable CO₂ uptake. Our results show that the adsorption occurs preferentially close to the inorganic pillar SiF₆, which polarizes the gas molecule, increasing the electrostatic contribution to the interaction. The adsorption strength correlates with the size of the pore, and it is stronger in the smaller porous of SIFSIX-3-Cu for all gases. The successive loading of CO₂ in a T-shape form inside the porous indicates a synergic polarization effect, increasing the adsorption energy in SIFSIX-2-Cu and SIFSIX-2-Cu-i, but not in SIFSIX-3-Cu. For all materials, we observe the following order in the adsorption energy: CO₂ > CH₄ > CO > N₂ > O₂ > H₂, suggesting that a thermodynamic separation could be possible; however, kinetic effects are also important in SIFSIX-3-Cu. Graphical abstract.

Luminescent Properties of DOBDC Containing MOFs: The Role of Free Hydroxyls

A novel metal-organic framework (MOF), Mn-DOBDC, has been synthesized in an effort to investigate the role of both the metal center and presence of free linker hydroxyls on the luminescent properties of DOBDC (2,5-dihydroxyterephthalic acid) containing MOFs. Co-MOF-74, RE-DOBDC (RE-Eu and Tb), and Mn-DOBDC have been synthesized and analyzed by powder X-ray diffraction (PXRD) and the fluorescent properties probed by UV-Vis spectroscopy and density functional theory (DFT). Mn-DOBDC has been synthesized by a new method involving a concurrent facile reflux synthesis and slow crystallization, resulting in yellow single crystals in monoclinic space group C2/c. Mn-DOBDC was further analyzed by single-crystal X-ray diffraction (SCXRD), scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS), and photoluminescent emission. Results indicate that the luminescent properties of the DOBDC linker are transferred to the three-dimensional structures of both the RE-DOBDC and Mn-DOBDC, which contain free hydroxyls on the linker. In Co-MOF-74 however, luminescence is quenched in the solid state due to binding of the phenolic hydroxyls within the MOF structure. Mn-DOBDC exhibits a ligand-based tunable emission that can be controlled in solution by the use of different solvents.

Coordinated Water as New Binding Sites for the Separation of Light Hydrocarbons in Metal-Organic Frameworks with Open Metal Sites

Metal-organic frameworks with open metal sites are promising materials for gas separations. Particularly, the M₂(dobdc) (dobdc^4- = 2,5-dioxidobenzenedicarboxylate, M²⁺ = Co²⁺, Mn²⁺, Fe²⁺, ...) framework has been the Drosophila of this research field and has delivered groundbreaking results in terms of sorption selectivity. However, many studies focus on perfect two-component mixtures and use theoretical models, e.g., the ideal adsorbed solution theory, to calculate selectivities. Within this work, we shed light on the comparability of these selectivities with values obtained from propane/propene multicomponent measurements on the prototypical Co₂(dobdc) framework, and we study the impact of impurities like water on the selectivity. Despite the expected capacity loss, the presence of water does not necessarily lead to a decreased selectivity. Density functional theory calculations of the binding energies prove that the water molecules adsorbed to the metal centers introduce new binding sites for the adsorbates.

Solvent-dependent variations of both structure and catalytic performance in three manganese coordination polymers

Three new Mn-based MOFs have been prepared, and a 3D framework can act as an efficient and recycled catalyst in CO₂ cycloaddition with different epoxides.