Construction of Bi2WO6/ZnIn2S4 with Z-scheme structure for efficient photocatalytic performance

Bismuth-Based Z-Scheme Heterojunction Photocatalysts for Remediation of Contaminated Water

Agricultural runoff, fuel spillages, urbanization, hospitalization, and industrialization are some of the serious problems currently facing the world. In particular, byproducts that are hazardous to the ecosystem have the potential to mix with water used for drinking. Over the last three decades, various techniques, including biodegradation, advanced oxidation processes (AOPs), (e.g., photocatalysis, photo-Fenton oxidation, Fenton-like oxidation, and electrochemical oxidation process adsorption), filtration, and adsorption techniques, have been developed to remove hazardous byproducts. Among those, AOPs, photocatalysis has received special attention from the scientific community because of its unusual properties at the nanoscale and its layered structure. Recently, bismuth based semiconductor (BBSc) photocatalysts have played an important role in solving global energy demand and environmental pollution problems. In particular, bismuth-based Z-scheme heterojunction (BBZSH) is considered the best alternative route to overhaul the limitations of single-component BBSc photocatalysts. This work aims to review recent studies on a new type of BBZSH photocatalysts for the treatment of contaminated water. The general overview of the synthesis methods, efficiency-enhancing strategies, classifications of BBSc and Z-scheme heterojunctions, the degradation mechanisms of Z- and S-schemes, and the application of BBZSH photocatalysts for the degradation of organic dyes, antibiotics, aromatics compounds, endocrine-disrupting compounds, and volatile organic compounds are reviewed. Finally, challenges and the future perspective of BBZSH photocatalysts are discussed.

Boosted Photocatalytic Performance for Antibiotics Removal with Ag/PW12/TiO2 Composite: Degradation Pathways and Toxicity Assessment

Photocatalyst is the core of photocatalysis and directly determines photocatalytic performance. However, low quantum efficiency and low utilization of solar energy are important technical problems in the application of photocatalysis. In this work, a series of polyoxometalates (POMs) [H3PW12O40] (PW12)-doped titanium dioxide (TiO2) nanofibers modified with various amount of silver (Ag) nanoparticles (NPs) were prepared by utilizing electrospinning/photoreduction strategy, and were labelled as x wt% Ag/PW12/TiO2 (abbr. x% Ag/PT, x = 5, 10, and 15, respectively). The as-prepared materials were characterized with a series of techniques and exhibited remarkable catalytic activities for visible-light degradation tetracycline (TC), enrofloxacin (ENR), and methyl orange (MO). Particularly, the 10% Ag/PT catalyst with a specific surface area of 155.09 m2/g and an average aperture of 4.61 nm possessed the optimal photodegradation performance, with efficiencies reaching 78.19% for TC, 93.65% for ENR, and 99.29% for MO, which were significantly higher than those of PW12-free Ag/TiO2 and PT nanofibers. Additionally, various parameters (the pH of the solution, catalyst usage, and TC concentration) influencing the degradation process were investigated in detail. The optimal conditions are as follows: catalyst usage: 20 mg; TC: 20 mL of 20 ppm; pH = 7. Furthermore, the photodegradation intermediates and pathways were demonstrated by HPLC-MS measurement. We also investigated the toxicity of products generated during TC removal by employing quantitative structure-activity relationship (QSAR) prediction through a toxicity estimation software tool (T.E.S.T. Version 5.1.2.). The mechanism study showed that the doping of PW12 and the modification of Ag NPs on TiO2 broadened the visible-light absorption, accelerating the effective separation of photogenerated carriers, therefore resulting in an enhanced photocatalytic performance. The research provided some new thoughts for exploiting efficient and durable photocatalysts for environmental remediation.

Construction of a p-n heterojunction based on magnetic Mn0.6Zn0.4Fe2O4 and ZnIn2S4 to improve photocatalytic performance

To improve the photocatalytic performance of Mn_0.6Zn_0.4Fe₂O₄ (MZFO) and ZnIn₂S₄ (ZIS) for organic pollutants, the p-n MZFO@ZIS heterojunctions with different weight percentage (10 ~ 40%) of MZFO are constructed from spent batteries and added indium ion via a green bioleaching and hydrothermal method. Structural, optical, and photocatalytic properties for the heterojunctions are investigated systematically by XRD, FT-IR, SEM-EDX, TEM, BET, VB-XPS, UV-vis DRS, PL, etc. The results confirm that p-n junction significantly improves the visible light adsorption and the separation efficiency of photogenerated carriers. Specifically, MZFO-25%@ZIS shows the highest photodegradation performance toward Congo red (CR), and its reactive kinetic constant is about 9.6, 7.8, and 7.0 times higher than that of P25 TiO₂, MZFO, and ZIS, respectively, and MZFO-25%@ZIS still possesses a high reusability and simple magnetic separation after 5 cycles of reuse. The radical trapping experiments and electronic paramagnetic resonance (EPR) tests show that ·O₂^-, ·OH, and h⁺ are the most important active substance for degrading CR. The pathways for the CR degradation are further proposed based on the intermediate analysis. DFT + U calculations confirm that the high charge density of Zn-O, Fe-O, and Zn-S bonds in the MZFO and ZIS molecules provides the electrons for the sufficient production of free radicals. This work also provides a novel high value-added strategy for the green utilization of spent batteries.

High-Throughput Strategies for the Design, Discovery, and Analysis of Bismuth-Based Photocatalysts

Bismuth-based nanostructures (BBNs) have attracted extensive research attention due to their tremendous development in the fields of photocatalysis and electro-catalysis. BBNs are considered potential photocatalysts because of their easily tuned electronic properties by changing their chemical composition, surface morphology, crystal structure, and band energies. However, their photocatalytic performance is not satisfactory yet, which limits their use in practical applications. To date, the charge carrier behavior of surface-engineered bismuth-based nanostructured photocatalysts has been under study to harness abundant solar energy for pollutant degradation and water splitting. Therefore, in this review, photocatalytic concepts and surface engineering for improving charge transport and the separation of available photocatalysts are first introduced. Afterward, the different strategies mainly implemented for the improvement of the photocatalytic activity are considered, including different synthetic approaches, the engineering of nanostructures, the influence of phase structure, and the active species produced from heterojunctions. Photocatalytic enhancement via the surface plasmon resonance effect is also examined and the photocatalytic performance of the bismuth-based photocatalytic mechanism is elucidated and discussed in detail, considering the different semiconductor junctions. Based on recent reports, current challenges and future directions for designing and developing bismuth-based nanostructured photocatalysts for enhanced photoactivity and stability are summarized.

Synergistic Effect of Charge Separation and Multiple Reactive Oxygen Species Generation on Boosting Photocatalytic Degradation of Fluvastatin by ZnIn2S4/Bi2WO6 Z-Scheme Heterostructured Photocatalytst

The application of semiconductor photocatalysts with narrow band gaps is hindered by the rapid recombination of electron-hole pairs and limitation of multiple reactive oxygen species (ROS) synchronous generation. A n-n-type direct Z-scheme heterostructured photocatalyst was constructed based on the staggered band alignment of bismuth tungstate (Bi₂WO₆) and indium zinc sulfide (ZnIn₂S₄) to reveal the synergistic effect of charge separation and multiple ROS synchronous generation on boosting photocatalytic performance. Under irradiation, electrons in the conduction band (CB) of Bi₂WO₆ and holes in the valence band (VB) of ZnIn₂S₄ recombined at interface to prolong the lifetime of electrons in the CB of ZnIn₂S₄ and holes in the VB of Bi₂WO₆. Meanwhile, the multiple ROS synchronously generated to oxidize pollutant due to the strong redox ability of electrons of ZnIn₂S₄ and holes of Bi₂WO₆, which was determined by the CB potential of ZnIn₂S₄ and VB potential of Bi₂WO₆. The results provided valuable insights for the application of photocatalysts with a narrow band gap in the field of water pollution control.

Novel scheme towards interfacial charge transfer between ZnIn2S4 and BiOBr for efficient photocatalytic removal of organics and chromium (VI) from water

Construction of Z-scheme heterostructure is an effective strategy to enhance the charge carriers' separation. However, successfully achieving this on the defect heterojunction to improve the photocatalytic activity remains challenging. This work successfully obtained sulfur vacancy in the ZnIn₂S₄/BiOBr (SZIS/BOB) heterojunction composites with S-O covalent bonding using a hydrothermal method. As a result, they exhibited superior photocatalytic and stability performance. The optimized SZIS/BOB-10 exhibited excellent rhodamine B degradation (95.2%) and chromium (VI) reduction (97.8%) within 100 min under visible light. The enhanced composites with S-vacancies, S-O bond, and internal electric field induced the Z-scheme charge transfer mechanism. We had verified this mechanism based on the surface photovoltage spectra, electron spin response spectra, and density functional theory calculations. This work not only provides valuable insights into designing photocatalysts with a direct Z scheme heterostructure but also delineates a promising strategy for developing efficient photocatalysts to degrade organic pollutants.

Emerging bismuth-based direct Z-scheme photocatalyst for the degradation of organic dye and antibiotic residues

Organic dye and antibiotic residues are some of the key substances that can contaminate the environment due to their wide usage in various industries and modern medicine. The degradation of these substances present in waterbodies is essential while contemplating human health. Photocatalysts (PSs) are promising materials that develop highly reactive species instantly by simple solar energy conversion for degrading the organic dye and antibiotic residues and converting them into nontoxic products. Among numerous semiconductors, the bismuth (Bi)-containing PS has received great attention due to its strong sunlight absorption, facile preparation, and high photostability. Owing to the technology advancement and demerits of the traditional methods, a Bi-containing direct Z-scheme PS has been developed for efficient photogenerated charge carrier separation and strong redox proficiency. In this review, a synthetic Bi-based Z-scheme heterojunction that mimics natural photosynthesis is described, and its design, fabrication methods, and applications are comprehensively reviewed. Specifically, the first section briefly explains the role of various semiconductors in the environmental applications and the importance of the Bi-based materials for constructing the Z-scheme photocatalytic systems. In the successive section, overview of Z-scheme PS are concisely discussed. The fourth and fifth sections extensively explain the degradation of the organic dyes and antibiotics utilizing the Bi-based direct Z-scheme heterojunction. Eventually, the conclusions and future perspectives of this emerging research field are addressed. Overall, this review is potentially useful for the researchers involved in the environmental remediation field as a collection of up-to-date research articles for the fabrication of the Bi-containing direct Z-scheme PS.