Effect of the incorporation of silica blow spun nanofibers containing silver nanoparticles (SiO2/Ag) on the mechanical, physicochemical, and biological properties of a low-viscosity bulk-fill composite resin

Long-lasting antimicrobial effect of multipurpose ZnO nanoparticle-loaded dental resins enhanced by blue light photodynamic therapy

OBJECTIVES

This study aimed to assess the potential of experimental dental resins containing ZnO nanoparticles (ZnO-NPs) for antimicrobial photodynamic therapy (aPDT) as a functional tool for the modulation of cariogenic biofilm in long-term.

METHODS

Minimum inhibitory and bactericidal concentrations (MIC/MBC) of ZnO-NPs against Streptococcus mutans were initially determined under different energy densities of blue LED irradiation (0.00, 1.35, 6.75, or 20.25 J/cm2) to optimize aPDT parameters. Experimental dental resins were then formulated with 0 % (control), 5 %, 10 %, and 20 % ZnO-NPs. Resin disks (1 mm x 6 mm) were prepared to evaluate the antimicrobial and photocatalytic potential of the experimental groups associated with 0 (dark), 1, 2, or 4 light cycles of blue-light irradiation (20.25 J/cm2, each cycle). The CFU count and Live/Dead assays were performed on a cariogenic biofilm model (S. mutans) on fresh and 6-month aged resin disks.

RESULTS

Blue light at 20.25 J/cm2 decreased MIC (from 250 µg/mL to 125 µg/mL) and MBC (from 1000 µg/mL to 500 µg/mL), establishing the optimal aPDT protocol. Experimental resins with 5 %, 10 %, or 20 % ZnO-NPs, when exposed to 4 cycles of blue light, significantly reduced biofilm viability compared to controls, both initially and after aging. The 20 % ZnO-NP resin sustained > 3.log10 CFU reduction after 6 months, even with 2 cycles of light. Live/Dead assays showed > 50 % dead cells with the 20 % ZnO-NP resin after 2 light cycles.

SIGNIFICANCE

ZnO-NP-loaded dental resins associated with blue light aPDT offer promise as a long-lasting antimicrobial alternative, potentially enhancing the control of pathogenic biofilms.

Physicochemical and biological properties of dental materials and formulations with silica nanoparticles: A narrative review

OBJECTIVE

Silica nanoparticles (SNPs) have been extensively studied and used in different dental applications to promote improved physicochemical properties, high substance loading efficiency, in addition to sustained delivery of substances for therapeutic or preventive purposes. Therefore, this study aimed to review the SNPs applications in nanomaterials and nanoformulations in dentistry, discussing their effect on physicochemical properties, biocompatibility and ability to nanocarry bioactive substances.

DATA RESOURCES

Literature searches were conducted on PubMed, Web of Science, and Scopus databases to identify studies examining the physicochemical and biological properties of dental materials and formulations containing SNPs. Data extraction was performed by one reviewer and verified by another STUDY SELECTION: A total of 50 were reviewed. In vitro studies reveal that SNPs improved the general properties of dental materials and formulations, such as microhardness, fracture toughness, flexural strength, elastic modulus and surface roughness, in addition to acting as efficient nanocarriers of substances, such as antimicrobial, osteogenic and remineralizing substances, and showed biocompatibility CONCLUSIONS: SNPs are biocompatible, improve properties of dental materials and serve as effective carriers for bioactive substances CLINICAL SIGNIFICANCE: Overall, SNPs are a promising drug delivery system that can improve dental materials biological and physicochemical and aesthetic properties, increasing their longevity and clinical performance. However, more studies are needed to elucidate SNPs short- and long-term effects in the oral cavity, mainly on in vivo and clinical studies, to prove their effectiveness and safety.

The effect of mesoporous silica doped with silver nanoparticles on glass ionomer cements; physiochemical, mechanical and ion release analysis

BACKGROUND

The purpose of the study was to evaluate the effect of adding mesoporous silica with silver nanoparticles to conventional glass ionomer cements (GIC) on its, physical, chemical, mechanical properties and ion release analysis.

METHODS

Synthesized mesoporous silica with silver nanoparticles were added in 1, 3 and 5% by weight to the liquid component of GIC forming three experimental groups and compared with plain GIC as control group. Physical and chemical characterization were conducted using nano-computerized tomography (NanoCT) and Fourier transform infrared spectroscopy. Surface microhardness, water sorption and solubility were analyzed. Ion release was investigated using Inductive Coupled Plasma-Optical Emission Spectroscopy and High Performance Liquid Chromatography. Statistical analysis between different groups for the set parameters using parametric and non-parametric tests. The results were analysed using one way analysis of variance (p < 0.05).

RESULTS

Synthesized mesoporous silica with silver nanoparticles were of 7.28 ± 5.0 nm in diameter with a spherical morphology. NanoCT revealed less porosities for 3 wt %. Microhardness showed a statistically significant difference for 5 wt% at day 1 and 21 ( p < 0.0001). Water sorption values decreased significantly on day 14 compared to day 7 for control, 1, 3 and 5 wt%. Control specimens showed highest concentration of fluoride release followed by 5, 3 and 1 wt%.

CONCLUSION

Mesoporous silica with silver nanoparticles modified glass ionomer cements showed comparable microhardness to conventional GIC. Ion release was evident from the modified specimens. Silver remained within the GIC for atleast four weeks following incorporation.

Effects of UV Postcuring Times on the Color Stability, Surface Properties and Conversion of 3D-printed Temporary Resin Composites

OBJECTIVE

To evaluate the effects of UV postcuring times on color stability (CS), surface properties (wettability [°] and surface roughness [Ra]), and conversion of 3D-printed resins for temporary restorations.

METHODS

Disc-shaped specimens (10.0×3.0 mm) and maxillary central incisors (8.2×10.3 mm) were fabricated using provisional 3D-printed resin (PriZma Bio Prov [PZ] and PrintaX AA TEMP [PX]) in A2 shade and subjected to UV postcure times of 0 (T0), 5 (T1), 10 (T2), and 15 (T3) minutes (n=15). The incisors were used for CS evaluation with a colorimeter. In contrast, discs were used to measure the contact angle using the sessile drop method, surface roughness with an optical profilometer, and degree of conversion with FT-NIR. For CS, Ra, contact angle, and degree of conversion, a two-way ANOVA with Bonferroni post-hoc test (α=0.05) was used.

RESULTS

PX resin demonstrated greater color stability than PZ (p=0.001). Long UV postcuring times (10 to 15 minutes) will increase the contact angle (p=0.013) and stabilize the degree of conversion (p=0.01), while 5 to 10 minutes of UV postcuring will provide better surface smoothness (p=0.04) of both resins.

CONCLUSIONS

Long UV postcuring times (10 to 15 minutes) lead to greater alterations in color, contact angle, and stability of the degree of conversion, while 5 to 10 minutes lead to a smoother surface of the 3D-printed temporary resins.

The Impact of Titanium Hydroxyapatite Doping on the Mechanical and Biological Properties of Photocured Resin

Photocured resin materials are widely used in various fields, such as 3D printing, medical applications, and dentistry. However, the strength, wear resistance, and antibacterial properties of photocured resin are relatively limited, rendering it susceptible to potential failures. In this recent study, photocured composite resins incorporating titanium-doped hydroxyapatite (Ti-HAp) were fabricated to investigate their mechanical and biological properties. It was found that the hardness and wear resistance increased with the addition of an appropriate amount of hydroxyapatite (HAp). Specifically, the 6wt%HAp resin demonstrated superior hardness. Compared with the 6wt%HAp resin, the acid resistance and wear resistance improved when an appropriate amount of Ti-HAp was added. Notably, the resin containing 0.56%Ti-HAp demonstrated superior wear resistance. Additionally, the antibacterial performance improved with higher titanium (Ti) content, showcasing a 71.9% improvement in the resin containing 1.37%Ti-HAp compared with the 6wt%HAp resin, alongside commendable remineralization capabilities. In summary, the Ti-HAp composite resin showed enhanced mechanical and biological properties, meeting clinical standards in terms of mechanical and antibacterial properties.

Effect of incorporating silica-hydroxyapatite-silver hybrid nanoparticles into the resin-modified glass ionomer on the adhesive remnant index score and shear bond strength of orthodontic metal brackets: An in vitro study

OBJECTIVES

This study aimed to assess the effect of addition of silica-hydroxyapatite-silver (Si-HA-Ag) hybrid nanoparticles to light-cure glass ionomer (GI) on shear bond strength (SBS) of metal brackets bonded with this adhesive and the adhesive remnant index (ARI) score.

MATERIAL AND METHODS

In this in vitro experimental study, 50 sound extracted premolars were assigned to 5 groups (n=10) for orthodontic metal bracket bonding with BracePaste® composite, Fuji ORTHO™ pure resin modified GI (RMGI), and RMGI reinforced with 2wt%, 5wt% and 10wt% Si-HA-Ag nanoparticles. The SBS of brackets was measured by a universal testing machine. Debonded specimens were inspected under a stereomicroscope at×10 magnification to determine the ARI score. Data were analyzed by one-way ANOVA, Scheffe test, Chi-square test, and Fisher's exact test (alpha=0.05).

RESULTS

The maximum mean SBS was recorded in BracePaste® composite followed by 2% RMGI, 0% RMGI, 5% RMGI and 10% RMGI. Only the difference between the BracePaste® composite and 10% RMGI was significant in this regard (P=0.006). The groups were not significantly different regarding the ARI scores (P=0.665). All the SBS values were within the clinically acceptable range.

CONCLUSION

Addition of 2wt% and 5wt% Si-HA-Ag hybrid nanoparticles to RMGI as orthodontic adhesive caused no significant change in SBS of orthodontic metal brackets while addition of 10wt% hybrid nanoparticles significantly decreased the SBS. Nonetheless, all the SBS values were within the clinically acceptable range. Addition of hybrid nanoparticles had no significant effect on the ARI score.

Evaluation of contact angle and mechanical properties of resin monomers filled with graphene oxide nanofibers

This in vitro study synthesized hybrid nanofibers embedded in graphene oxide (GO) and incorporated them into experimental resin composite monomers to evaluate their physical-mechanical properties. Inorganic-organic hybrid nanofibers were produced with precursor solutions of 1% wt. GO-filled Poly (d,l-lactide, PLA) fibers and scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) characterized the morphology and chemical composition of the spun fibers. Resin composite monomers were developed and a total of 5% nanofibers were incorporated into the experimental materials. Three groups were developed: G1 (control resin monomers), G2 (resin monomers/PLA nanofibers), and G3 (resin monomers/inorganic-organic hybrid nanofibers). Contact angle (n=3), flexural strength (n=22), elastic modulus (n=22), and Knoop hardness (n=6) were evaluated. The mean of the three indentations was obtained for each sample. The normality of data was assessed by QQ Plot with simulated envelopes and analyzed by Welch's method (p<0.05). Overall, SEM images showed the regular shape of nanofibers but were non-aligned. Compositional analysis from EDS (n=6) revealed the presence of carbon and oxygen (present in GO composition) and Si from the functionalization process. The results of contact angle (°) and hardness (Kg/mm2) for each group were as follow, respectively: G1 (59.65±2.90; 37.48±1.86a), G2 (67.99±3.93; 50.56±1.03b) and G3 (62.52±7.40; 67.83±1.01c). The group G3 showed the highest Knoop hardness values (67.83 kg/mm2), and the flexural strength of all groups was adversely affected. The experimental resin composite composed of hybrid nanofibers with GO presented increased hardness values and hydrophilic behavior.

Antimicrobial effect and the mechanical and surface properties of a self-disinfecting and a chlorhexidine-incorporated Type IV dental stone

STATEMENT OF PROBLEM

Stone casts are subject to contamination, but whether disinfectants incorporated into the stone are effective is unclear.

PURPOSE

The purpose of this in vitro study was to evaluate the antimicrobial activity and the mechanical and surface properties of self-disinfecting gypsum (SDG) and gypsum mixed with 2% chlorhexidine (GCHX).

MATERIAL AND METHODS

Antimicrobial action was evaluated using the diffusion-disk technique on Streptococcus aureus and Candida albicans 1 hour and 24 hours after pouring the gypsum. The groups were SDG, GCHX, a positive control (PC) of gypsum mixed with distilled water, and a negative control (NC) of filter paper disk soaked with 2% chlorhexidine; n=8. Inhibition halos were measured using the ImageJ software program and statistically analyzed using the repeated measures mixed ANOVA with time×group interaction. Compressive strength (CS) in MPa and surface roughness (SR) in μm (parameters: Ra - roughness average; and Sa - 3-dimensional (3D) arithmetic mean of the surface profile) tests were performed to characterize the specimens (evaluated groups: SDG, GCHX, and PC; n=10). CS data were analyzed by a 2-way ANOVA with time×group interaction, and SR data by a 1-way ANOVA (α=.05).

RESULTS

For S aureus, there were differences between GCHX and SDG at 1 hour and 24 hours (P<.05), but no significant differences were found for C albicans (P>.05). GCHX was better than PC, except for C albicans, and showed a reduction in CS when compared with PC and SDG (P<.05) at all time intervals. The SR of GCHX increased (Ra:1.76, Sa:2.08) when compared with PC (Ra:0.89, Sa:1.12) and SDG (Ra:1.03, Sa:1.35) (Ra: P<.004 and Sa: P<.001).

CONCLUSIONS

The antimicrobial activity of GCHX against S aureus was better than that of SDG, but neither had an effect against C albicans. As for CS and SR, GCHX presented a decrease in properties when compared with PC and SDG but was within the American Dental Association #25 specification values.

A Multifunctional Dental Resin Composite with Sr-N-Doped TiO2 and n-HA Fillers for Antibacterial and Mineralization Effects

Dental caries, particularly secondary caries, which is the main contributor to dental repair failure, has been the subject of extensive research due to its biofilm-mediated, sugar-driven, multifactorial, and dynamic characteristics. The clinical utility of restorations is improved by cleaning bacteria nearby and remineralizing marginal crevices. In this study, a novel multifunctional dental resin composite (DRC) composed of Sr-N-co-doped titanium dioxide (Sr-N-TiO2) nanoparticles and nano-hydroxyapatite (n-HA) reinforcing fillers with improved antibacterial and mineralization properties is proposed. The experimental results showed that the anatase-phase Sr-N-TiO2 nanoparticles were synthesized successfully. After this, the curing depth (CD) of the DRC was measured from 4.36 ± 0.18 mm to 5.10 ± 0.19 mm, which met the clinical treatment needs. The maximum antibacterial rate against Streptococcus mutans (S. mutans) was 98.96%, showing significant inhibition effects (p < 0.0001), which was experimentally verified to be derived from reactive oxygen species (ROS). Meanwhile, the resin exhibited excellent self-remineralization behavior in an SBF solution, and the molar ratio of Ca/P was close to that of HA. Moreover, the relative growth rate (RGR) of mouse fibroblast L929 indicated a high biocompatibility, with the cytotoxicity level being 0 or I. Therefore, our research provides a suitable approach for improving the antibacterial and mineralization properties of DRCs.

Advanced materials and technologies for oral diseases

Oral disease, as a class of diseases with very high morbidity, brings great physical and mental damage to people worldwide. The increasing burden and strain on individuals and society make oral diseases an urgent global health problem. Since the treatment of almost all oral diseases relies on materials, the rapid development of advanced materials and technologies has also promoted innovations in the treatment methods and strategies of oral diseases. In this review, we systematically summarized the application strategies in advanced materials and technologies for oral diseases according to the etiology of the diseases and the comparison of new and old materials. Finally, the challenges and directions of future development for advanced materials and technologies in the treatment of oral diseases were refined. This review will guide the fundamental research and clinical translation of oral diseases for practitioners of oral medicine.