4D flow MRI derived aortic hemodynamics multi-year follow-up in repaired coarctation with bicuspid aortic valve

Repaired coarctation of the aorta does not affect four-dimensional flow metrics in bicuspid aortic valve disease

OBJECTIVES

The objective of this study was primarily to compare four-dimensional flow magnetic resonance imaging metrics in the ascending aorta (AA) of patients with right-left fusion type bicuspid aortic valve (RL-BAV) and repaired coarctation of the aorta (CoA) to RL-BAV without CoA. Metrics of patients with RL-BAV were also compared to the matched group of patients with common tricuspid aortic valve (TAV).

METHODS

Eleven patients with RL-BAV and CoA, 11 patients with RL-BAV without CoA and 22 controls with TAV were investigated. Peak velocity (cm/s), peak flow (ml/s) and flow displacement (%) were analysed at 5 pre-defined AA levels. In addition, regional wall shear stress (WSS, mN/m2), circumferential WSS (WSSc) and axial WSS (WSSa) at all levels were quantified in 6 sectors of the aortic circle. Averaged WSS values on each level (WSSavg, WSSc, avg and WSSa, avg) were calculated as well.

RESULTS

Peak velocity at the proximal tubular AA was significantly lower in BAV and CoA group (P = 0.047) compared to BAV without CoA. In addition, the WSSa, avg was found to be higher for the BAV and CoA group at proximal AA respectively (P = 0.040). No other significant differences were found between these groups. BAV group's peak velocity was higher at every level (P < 0.001-0.004) compared to TAV group. Flow displacement was significantly higher for the BAV group at every level (P < 0.001) besides at the most distal level. All averaged WSS values were significantly higher in BAV patients in distal AA (P < 0.001-0.018).

CONCLUSIONS

Repaired CoA does not relevantly alter four-dimensional flow metrics in the AA of patients with RL-BAV. However, RL-BAV majorly alters flow dynamics in the AA when compared to patients with TAV.

CLINICAL TRIAL REGISTRATION NUMBER

https://www.clinicaltrials.gov/study/NCT05065996, Unique Protocol ID 5063566.

4D flow cardiac MRI to assess pulmonary blood flow in patients with pulmonary arterial hypertension associated with congenital heart disease

PURPOSE

The purpose of this study was to evaluate the accuracy of four-dimensional flow cardiac magnetic resonance imaging (4D flow MRI) compared to right heart catheterization in measuring pulmonary flow (Qp), systemic flow (Qs) and pulmonary-to-systemic flow ratio (Qp/Qs) in patients with pulmonary arterial hypertension associated with congenital heart disease (PAH-CHD).

MATERIALS AND METHODS

The study was registered on Clinical-trial.gov (NCT03928002). Sixty-four patients with PAH-CHD who underwent 4D flow MRI were included. There were 16 men and 48 women with a mean age of 45.3 ± 13.7 (standard deviation [SD]) years (age range: 21-77 years). Fifty patients (50/64; 78%) presented with pre-tricuspid shunt. Qp (L/min), Qs (L/min) and Qp/Qs were measured invasively using direct Fick method during right heart catheterization and compared with measurements assessed by 4D flow MRI within a 24-48-hour window.

RESULTS

The average mean pulmonary artery pressure was 51 ± 17 (SD) mm Hg with median pulmonary vascular resistance of 8.8 Wood units (Q1, Q3: 5.3, 11.7). A strong linear correlation was found between Qp measurements obtained with 4D flow MRI and those obtained with the Fick method (r = 0.96; P < 0.001). Bland Altman analysis indicated a mean difference of 0.15 ± 0.48 (SD) L/min between Qp estimated by 4D flow MRI and by right heart catheterization. A strong correlation was found between Qs and Qp/Qs measured by 4D flow MRI and those obtained with the direct Fick method (r = 0.85 and r = 0.92; P < 0.001 for both).

CONCLUSION

Qp as measured by 4D flow MRI shows a strong correlation with measurements derived from the direct Fick method. Further investigation is needed to develop less complex and standardized methods for measuring essential PAH parameters, such as pulmonary arterial pressures and pulmonary vascular resistance.

Value of aortic volumes assessed by automated segmentation of 3D MRI data in patients with thoracic aortic dilatation: A case-control study

PURPOSE

The purpose of this study was to investigate the benefit of aortic volumes compared to diameters or cross-sectional areas on three-dimensional (3D) magnetic resonance imaging (MRI) in discriminating between patients with dilated aorta and matched controls.

MATERIALS AND METHODS

Sixty-two patients (47 men and 15 women; median age, 66 years; age range: 33-86 years) with tricuspid aortic valve and ascending thoracic aorta aneurysm (TAV-ATAA) and 43 patients (35 men and 8 women; median age, 51 years; age range: 17-76 years) with bicuspid aortic valve and dilated ascending aorta (BAV) were studied. One group of 54 controls matched for age and sex to patients with TAV-ATAA (39 men and 15 women; median age, 68 years; age range: 33-81 years) and one group of 42 controls matched for age and sex to patients with BAV (34 men and 8 women; median age, 50 years; age range: 17-77 years) were identified. All participants underwent 3D MRI, used for 3D-segmentation for measuring aortic length, maximal diameter, maximal cross-sectional area (CSA) and volume for the ascending aorta.

RESULTS

An increase in ascending aorta volume (TAV-ATAA: +107%; BAV: +171% vs. controls; P < 0.001) was found, which was three times greater than the increase in diameter (TAV-ATAA: +29%; BAV: +40% vs. controls; P < 0.001). In differentiating patients with TAV-ATAA from their controls, the indexed ascending aorta volume showed better performances (AUC, 0.935 [95% confidence interval (CI): 0.882-0.989]; accuracy, 88.7% [95% CI: 82.9-94.5]) than indexed ascending aorta length (P < 0.001), indexed ascending aorta maximal diameter (P = 0.003) and indexed ascending aorta maximal CSA (P = 0.03). In differentiating patients with BAV from matched controls, indexed ascending aorta volume showed significantly better performances performance (AUC, 0.908 [95% CI: 0.829-0.987]; accuracy, 88.0% [95% CI: 80.9-95.0]) than indexed ascending aorta length (P = 0.02) and not different from indexed ascending aorta maximal diameter (P = 0.07) or from indexed ascending aorta maximal CSA (P = 0.27) CONCLUSION: Aortic volume measured by 3D-MRI integrates both elongation and luminal dilatation, resulting in greater classification performance than maximal diameter and length in differentiating patients with dilated ascending aorta or aneurysm from controls.

Clinical Use of Blood Flow Analysis through 4D-Flow Imaging in Aortic Valve Disease

Bicuspid aortic valve (BAV), which affects 1% of the general population, results from the abnormal fusion of the cusps of the aortic valve. BAV can lead to the dilatation of the aorta, aortic coarctation, development of aortic stenosis (AS), and aortic regurgitation. Surgical intervention is usually recommended for patients with BAV and bicuspid aortopathy. This review aims to examine 4D-flow imaging as a tool in cardiac magnetic resonance imaging for assessing abnormal blood flow and its clinical application in BAV and AS. We present a historical clinical approach summarizing evidence of abnormal blood flow in aortic valve disease. We highlight how abnormal flow patterns can contribute to the development of aortic dilatation and novel flow-based biomarkers that can be used for a better understanding of the disease progression.

Location matters: Offset in tissue-engineered vascular graft implantation location affects wall shear stress in porcine models

Objective

Although surgical simulation using computational fluid dynamics has advanced, little is known about the accuracy of cardiac surgical procedures after patient-specific design. We evaluated the effects of discrepancies in location for patient-specific simulation and actual implantation on hemodynamic performance of patient-specific tissue-engineered vascular grafts (TEVGs) in porcine models.

Methods

Magnetic resonance angiography and 4-dimensional (4D) flow data were acquired in porcine models (n = 11) to create individualized TEVGs. Graft shapes were optimized and manufactured by electrospinning bioresorbable material onto a metal mandrel. TEVGs were implanted 1 or 3 months postimaging, and postoperative magnetic resonance angiography and 4D flow data were obtained and segmented. Displacement between intended and observed TEVG position was determined through center of mass analysis. Hemodynamic data were obtained from 4D flow analysis. Displacement and hemodynamic data were compared using linear regression.

Results

Patient-specific TEVGs were displaced between 1 and 8 mm during implantation compared with their surgically simulated, intended locations. Greater offset between intended and observed position correlated with greater wall shear stress (WSS) in postoperative vasculature (P < .01). Grafts that were implanted closer to their intended locations showed decreased WSS.

Conclusions

Patient-specific TEVGs are designed for precise locations to help optimize hemodynamic performance. However, if TEVGs were implanted far from their intended location, worse WSS was observed. This underscores the importance of not only patient-specific design but also precision-guided implantation to optimize hemodynamics in cardiac surgery and increase reproducibility of surgical simulation.