Assessment of polyaniline nanoparticles toxicity and teratogenicity in aquatic environment using Rhinella arenarum model

A mixed electronic-ionic conductor-based bifunctional sensing layer beyond ionophores for sweat electrolyte monitoring

Noninvasive and continuous monitoring of electrolytes in biofluids based on wearable biotechnology provides extensive health-related physiological information. The state-of-the-art wearable bioelectronic ion sensors depend on the organic ionophore-based solid-contact structure of potentiometric ion-selective electrodes. This structure contains two functional sensing layers, i.e., a solid contact (ion-to-electron signal transduction) and an ionophore-containing ion-selective membrane (ISM, ion recognition). However, the potential drift, biotoxicity, and expensive organic ionophores complicate practical wearable applications. These challenges intrinsically originate from the ISM. Herein, an ISM-free wearable ion sensor based on mixed electronic-ionic conductors of tungsten bronzes is reported. These materials can serve as a bifunctional sensing layer for simultaneous ion-to-electron transduction through the redox reaction of W6+/5+ and ion recognition through crystal ion exchange. The K- and Na-adjusted WO3 disclosed Nernstian responses toward NH4+ and H+, respectively. The selectivity is comparable to or even better than organic ionophores, such as ammonia ionophore of nonactin. Further, the on-body monitoring of sweat ammonia and pH was realized using an integrated ISM-free flexible sensor. Therefore, this work offers an ISM-free concept and emphasizes the importance of developing next-generation ISM-free wearable bioelectronic ion sensors.

Designing Electrical Stimulation Platforms for Neural Cell Cultivation Using Poly(aniline): Camphorsulfonic Acid

Electrical stimulation is a powerful strategy to improve the differentiation of neural stem cells into neurons. Such an approach can be implemented, in association with biomaterials and nanotechnology, for the development of new therapies for neurological diseases, including direct cell transplantation and the development of platforms for drug screening and disease progression evaluation. Poly(aniline):camphorsulfonic acid (PANI:CSA) is one of the most well-studied electroconductive polymers, capable of directing an externally applied electrical field to neural cells in culture. There are several examples in the literature on the development of PANI:CSA-based scaffolds and platforms for electrical stimulation, but no review has examined the fundamentals and physico-chemical determinants of PANI:CSA for the design of platforms for electrical stimulation. This review evaluates the current literature regarding the application of electrical stimulation to neural cells, specifically reviewing: (1) the fundamentals of bioelectricity and electrical stimulation; (2) the use of PANI:CSA-based systems for electrical stimulation of cell cultures; and (3) the development of scaffolds and setups to support the electrical stimulation of cells. Throughout this work, we critically evaluate the revised literature and provide a steppingstone for the clinical application of the electrical stimulation of cells using electroconductive PANI:CSA platforms/scaffolds.

Directly Using Ti3C2Tx MXene for a Solid-Contact Potentiometric pH Sensor toward Wearable Sweat pH Monitoring

The level of hydrogen ions in sweat is one of the most important physiological indexes for the health state of the human body. As a type of two-dimensional (2D) material, MXene has the advantages of superior electrical conductivity, a large surface area, and rich functional groups on the surface. Herein, we report a type of Ti₃C₂T_x-based potentiometric pH sensor for wearable sweat pH analysis. The Ti₃C₂T_x was prepared by two etching methods, including a mild LiF/HCl mixture and HF solution, which was directly used as the pH-sensitive materials. Both etched Ti₃C₂T_x showed a typical lamellar structure and exhibited enhanced potentiometric pH responses compared with a pristine precursor of Ti₃AlC₂. The HF-Ti₃C₂T_x disclosed the sensitivities of -43.51 ± 0.53 mV pH^-1 (pH 1-11) and -42.73 ± 0.61 mV pH^-1 (pH 11-1). A series of electrochemical tests demonstrated that HF-Ti₃C₂T_x exhibited better analytical performances, including sensitivity, selectivity, and reversibility, owing to deep etching. The HF-Ti₃C₂T_x was thus further fabricated as a flexible potentiometric pH sensor by virtue of its 2D characteristic. Upon integrating with a solid-contact Ag/AgCl reference electrode, the flexible sensor realized real-time monitoring of pH level in human sweat. The result disclosed a relatively stable pH value of ~6.5 after perspiration, which was consistent with the ex situ sweat pH test. This work offers a type of MXene-based potentiometric pH sensor for wearable sweat pH monitoring.

Recent Advances in Wearable Potentiometric pH Sensors

Wearable sensors reflect the real-time physiological information and health status of individuals by continuously monitoring biochemical markers in biological fluids, including sweat, tears and saliva, and are a key technology to realize portable personalized medicine. Flexible electrochemical pH sensors can play a significant role in health since the pH level affects most biochemical reactions in the human body. pH indicators can be used for the diagnosis and treatment of diseases as well as the monitoring of biological processes. The performances and applications of wearable pH sensors depend significantly on the properties of the pH-sensitive materials used. At present, existing pH-sensitive materials are mainly based on polyaniline (PANI), hydrogen ionophores (HIs) and metal oxides (MOx). In this review, we will discuss the recent progress in wearable pH sensors based on these sensitive materials. Finally, a viewpoint for state-of-the-art wearable pH sensors and a discussion of their existing challenges are presented.

Effects of one-dimensional nanomaterial polyaniline nanorods on earthworm biomarkers and soil enzymes

Polyaniline nanorods (PANRs) are typical one-dimensional nanomaterials (1D NMs), which are widely used in medicine, batteries and water treatment, etc. Applications of PANRs will eventually enter the soil environment, but their ecotoxicity has been barely reported. Therefore, we measured earthworm biomass, earthworm biomarkers and soil enzymes to investigate the ecotoxicity of PANRs. The result of positive and increasing growth inhibition rates (GIR) showed that PANRs inhibited earthworm growth. As for earthworm biomarkers, PANRs caused a decrease in protein content, indicating that PANRs stress would increase earthworm energy consumption. Except for the 7th day, the activities of SOD, CAT and POD consistently increased, suggesting that PANRs activated the earthworm antioxidant system. The continually augment of MDA content indicated that PANRs stress would cause earthworm lipid damage. Na⁺-K⁺-ATPase increased with an excellent dose-time relationship. Differently, cellulase and AChE activities promoted at low concentrations and inhibited at high concentrations. The positive and dose-dependent IBRv2 indicated that the higher the concentrations of PANRs, the greater the ecotoxicity to earthworms. PANRs inhibited the soil enzyme activities such as sucrase, neutral phosphatase, protease and urease, while induced catalase activity in a dose-dependent manner. Earthworm addition reduced catalase activity by 10.74-29.99%, but improved other soil enzymes activities, demonstrating that earthworms played a positive role in regulating soil enzyme activity. GMean and T-SQI consistently increased due to earthworm activity, meaning a higher soil microbial functional diversity. Generally, this study provided data support for future PANRs toxicity studies, but their toxicity mechanisms still need to be further studied.

Physicochemical Properties and Atomic-Scale Interactions in Polyaniline (Emeraldine Base)/Starch Bio-Based Composites: Experimental and Computational Investigations

The processability of conductive polymers still represents a challenge. The use of potato starch as a steric stabilizer for the preparation of stable dispersions of polyaniline (emeraldine base, EB) is described in this paper. Biocomposites are obtained by oxidative polymerization of aniline in aqueous solutions containing different ratios of aniline and starch (% w/w). PANI-EB/Starch biocomposites are subjected to structural analysis (UV-Visible, RAMAN, ATR, XRD), thermal analysis (TGA, DSC), morphological analysis (SEM, Laser Granulometry), and electrochemical analysis using cyclic voltammetry. The samples were also tested for their solubility using various organic solvents. The results showed that, with respect to starch particles, PANI/starch biocomposites exhibit an overall decrease in particles size, which improves both their aqueous dispersion and solubility in organic solvents. Although X-ray diffraction and DSC analyses indicated a loss of crystallinity in biocomposites, the cyclic voltammetry tests revealed that all PANI-EB/Starch biocomposites possess improved redox exchange properties. Finally, the weak interactions at the atomic-level interactions between amylopectin–aniline and amylopectin–PANI were disclosed by the computational studies using DFT, COSMO-RS, and AIM methods.

Surface-Enhanced Biocompatibility and Adsorption Capacity of a Zirconium Phosphate-Coated Polyaniline Composite

The present study deals with the synthesis, characterization, and testing of a novel composite, zirconium(IV) phosphate-coated polyaniline (ZrPO4@PANI), toward the adsorption- and surface-controlled toxicity applications. Following the synthesis of the ZrPO4@PANI composite using the sol-gel route, various characterization techniques such as Fourier transform infrared spectroscopy, scanning electron microscopy, and powder X-ray diffraction were employed to confirm its surface functionality, morphology and agglomeration, and crystallinity and crystal nature, respectively. The composite was found to be effective toward the adsorptive removal of the methylene blue dye (an organic pollutant) as against the changes in the dye concentration, dose, pH, and so forth. Also, to understand the MB adsorption kinetics, the experimental data were evaluated using the Langmuir and Freundlich models and the results were described in accordance with the Langmuir isotherm model (an adsorption capacity of 120.48 mg/g at ambient temperature). In addition, the tests conducted using pseudo-first- and pseudo-second-order kinetic models confirmed the existence of pseudo-second-order rates. Furthermore, the calculation of thermodynamic parameters for the MB adsorption, namely, changes in enthalpy, entropy, and Gibbs' free energy, exhibited a spontaneous, feasible, and exothermic nature. Finally, the comparative studies of in vitro toxicity and flow cytometry confirmed that the copresence of ZrPO4 along with PANI significantly improved the biocompatibility. The outcome of the experimental results implies that the composite is capable enough of serving as the safe and low-cost adsorbent, in addition to supporting the effective capping of the surface toxicity of PANI.

Aniline-co-o-anthranilic Acid Copolymer-Chitosan/Ag@AgCl Nanohybrid as a Carrier for (E)-N'-(Pyridin-2-ylmethylene) Hydrazinecarbothiohydrazide Release and Antimicrobial Activity

Poly(aniline-co-o-anthranilic acid)-chitosan/silver@silver chloride (PAAN-CS/Ag@AgCl) nanohybrids were synthesized using different ratios of Ag@AgCl through a facile one-step process. The presence of CS led to the formation of the nanohybrid structure and prevented the aggregation of the copolymer efficiently. The synthesized nanohybrids were fully characterized by transmission electron microscopy, X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis. (E)-N'-(Pyridin-2-ylmethylene) hydrazinecarbothiohydrazide I was prepared using thiosemicarbazide and confirmed by ¹H-NMR, ¹³C-NMR, and FTIR analyses. Loading of the azine derivative I using various concentrations at different pH values onto the nanohybrid was followed by UV-vis spectroscopy. Langmuir and Freundlich adsorption isotherm models were used to describe the equilibrium isotherm, and the adsorption followed the Langmuir adsorption isotherm. A pseudo-second-order model was used to describe the kinetic data. A PAAN-CS/Ag@AgCl nanohybrid loaded with azine I interestingly showed efficient antimicrobial activity against Escherichia coli and Staphylococcus aureus more than the azine derivative I. The release of azine I at different pH values (2-7.4) was investigated and the kinetics of release were studied using zero-order, first-order, second-order, Higuchi, Hixson-Crowell, and Korsmeyer-Peppas equations.

Recent strategies for nano-based PTT combined with immunotherapy: from a biomaterial point of view

Cancer has been a great threat to humans for decades. Due to the limitations of monotherapy, combinational therapies such as photothermal therapy (PTT) and immunotherapy have gained increasing attention with expectation to overcome the shortfalls of each other and obtain satisfactory therapeutic outcomes. PTT can inhibit primary tumors by thermal ablation but usually fails to achieve complete eradication and cannot prevent metastasis and recurrence. Meanwhile, the efficacy of immunotherapy is usually attenuated by the weak immunogenicity of tumor and the immunosuppressive tumor microenvironment (ITM). Therefore, many recent studies have attempted to synergize PTT with immunotherapy in order to enhance the therapeutic efficacy. In this review, we aim to summarize the cutting-edge strategies in combining nano-based PTT with immunotherapy for cancer treatment. Herein, the combination strategies were mainly classified into four categories, including 1) nano-based PTT combined with antigens to induce host immune responses; 2) nano-based PTT in combination with immune adjuvants acting as in situ vaccines; 3) nano-based PTT synergized with immune checkpoint blockade or other regulators to relieve the ITM; 4) nano-based PTT combined with CAR-T therapy or cytokine therapy for tumor treatment. The characteristics of various photothermal agents and nanoplatforms as well as the immunological mechanisms for the synergism were also introduced in detail. Finally, we discussed the existing challenges and future prospects in combined PTT and immunotherapy.

Acute toxicity assessment of polyaniline/Ag nanoparticles/graphene oxide quantum dots on Cypridopsis vidua and Artemia salina

Nanotoxicology is argued and considered one of the emerging topics. In this study, polyaniline (PANI)/2-acrylamido-2-methylpropanesulfonic acid (AMPSA) capped silver nanoparticles (NPs)/graphene oxide (GO) quantum dots (QDs) nanocomposite (PANI/Ag (AMPSA)/GO QDs NC) as a nanoadsorbent has a potential for removal of toxic hexavalent chromium (Cr(VI)) ions from water. The acute toxicity of this NC was evaluated on Artemia salina and freshwater Ostracods (Cypridopsis vidua) larvae for 48 h. The measurements were made at 24 and 48 h with 3 repetitions. The 50% effective concentration (EC50) values of the NC were determined after the exposure of these organisms. According to the results of the optical microscope, it was found that both experimental organisms intake the NC. In the toxicity results of Ostracods, the NC had a highly toxic effect only at 250 mg/L after 48 h and the EC50 value was 157.6 ± 6.4 mg/L. For Artemia salina individuals, it was noted that they were less sensitive than the Ostracods and EC50 value was 476 ± 25.1 mg/L after 48 h. These results indicated that PANI/Ag (AMPSA)/GO QDs NC has low toxicity towards both investigated organisms.

Comparison of the toxicity of waters containing initially sulfaquinoxaline after photocatalytic treatment by TiO2 and polyaniline/TiO2

This paper addresses the residual toxicity of waters after photocatalysis treatments. The initial waters contain 7 mg L^-1 of sulfaquinoxaline (SQX) which is a sulfonamide antibiotic generally recorded inside the water. The contaminated waters are treated by photocatalytic degradation process with bare titania and titania covered with polyaniline (PANI) conducting polymer. The degradation of SQX is conducted at different pH in order to find the optimal condition to obtain SQX concentration relatively equal to zero in the shortest amount of time. This occurs for PANI/TiO₂ at pH 12 and TiO₂ at pH 4. Toxicity assays (concentration of biomass, pigmentation tests, and cells counting) are undertaken on the microalgae Chlorella vulgaris in order to evaluate the residual toxicity of the 2 treated waters. The toxicity results highlight that the water treated by PANI/TiO₂ at pH 12 is the less toxic towards the algae cells. The water processed by bare titania at acidic pH displays unneglectable toxicity towards the algae cells which are larger than the toxicity of the original SQX solution.

Oxidative stress and genotoxicity in Rhinella arenarum (Anura: Bufonidae) tadpoles after acute exposure to Ni-Al nanoceramics

The employ of nanomaterials (NMs) has exponentially grown due to the large number of technological advances in industrial, pharmaceutical and medical areas. That is the case of alumina (Al) nanoparticles which are extensively employed as support in heterogeneous catalysis processes. However, these NMs can cause great toxicity because of their ubiquitous properties, such as extremely small size and high specific surface area. So, it is required to assess the potential deleterious effects of these NMs on living organisms. In the present study, we analyze the oxidative stress and genotoxic potential of a nanoceramic catalyst Ni/<gamma>-Al₂O₃ (NC) and the NMs involved in their synthesis, <gamma>-Al₂O₃ support (SPC) and NiO/<gamma>-Al₂O₃ precursor (PC) on Rhinella arenarum larvae. Biomarkers of oxidative stress and genotoxic damage were measured in tadpoles exposed to 5 and 25 mg/L of each NMs for 96 h. The results indicated an inhibition of catalase activity in tadpoles exposed to both concentrations of PC and to 25 mg/L of SPC and NC. Moreover, both exposure concentrations of PC and NC significantly inhibited superoxide dismutase activity. Exposure to the three NMs caused inhibition of glutathione S-transferase activity, but there were no significant variations in reduced glutathione levels. Oxidative stress damage (lipid peroxidation) was observed in tadpoles treated with 25 mg/L PC, while the other treatments did not produce alterations. The MNs frequency significantly increased in larvae exposed to 25 mg/L PC indicating irreversible genotoxic damage. The results show that these NMs exert genotoxic effects and antioxidant defense system disruption in R. arenarum larvae.

Numerical Simulations as Means for Tailoring Electrically Conductive Hydrogels Towards Cartilage Tissue Engineering by Electrical Stimulation

Cartilage regeneration is a clinical challenge. In recent years, hydrogels have emerged as implantable scaffolds in cartilage tissue engineering. Similarly, electrical stimulation has been employed to improve matrix synthesis of cartilage cells, and thus to foster engineering and regeneration of cartilage tissue. The combination of hydrogels and electrical stimulation may pave the way for new clinical treatment of cartilage lesions. To find the optimal electric properties of hydrogels, theoretical considerations and corresponding numerical simulations are needed to identify well-suited initial parameters for experimental studies. We present the theoretical analysis of a hydrogel in a frequently used electrical stimulation device for cartilage regeneration and tissue engineering. By means of equivalent circuits, finite element analysis, and uncertainty quantification, we elucidate the influence of the geometric and dielectric properties of cell-seeded hydrogels on the capacitive-coupling electrical field stimulation. Moreover, we discuss the possibility of cellular organisation inside the hydrogel due to forces generated by the external electric field. The introduced methodology is easily reusable by other researchers and allows to directly develop novel electrical stimulation study designs. Thus, this study paves the way for the design of future experimental studies using electrically conductive hydrogels and electrical stimulation for tissue engineering.

The Toxicity of Secondary Lithium-Sulfur Batteries Components

Currently, apart from the widely known lithium-ion batteries, there are competitive solutions in the form of, for example, Li-S batteries. While the results of studies on the toxicity of Li-ion battery components are published, such studies on the components of Li-S cells are just beginning. The purpose of the current review was to identify materials used in the production of Li-S batteries and their toxicity, especially for humans. The review showed many kinds of materials with different levels of toxicity utilized for manufacturing of these cells. Some materials are of low toxicity, while some others are of the high one. A lot of materials have assigned different hazard statements. For some of the materials, no hazard statements were assigned, although such materials are toxic. No data related to the toxicity of some materials were found in the literature. This points out the need to further studies on their toxicity and legal actions to assign appropriate hazard statements.

Stability of Sn-Pd-Kaolinite catalyst during heat treatment and nitrate reduction in continuous flow reaction

In this study, a novel and highly reactive Sn-Pd catalyst supported by environmentally benign kaolinite (Sn-Pd-kaolinite) was developed and evaluated for stability for effective nitrate (NO₃^-) reduction in batch and continuous mode. Complete NO₃^- removal with fast reduction kinetics (k = 18.16 × 10^-2 min^-1) and 71% selectivity toward N₂ were achieved by the Sn-Pd-kaolinite catalyst during batch reactions. During continuous tests, 100% NO₃^- removal and 80% N₂ was achieved for 60 h. However, NO₃^- removal efficiency gradually decreased to 80% in170 h. The catalyst was then successfully regenerated in the system by increasing H₂ flow which achieved a complete NO₃^- removal again. The metal leaching from catalyst surface was negligible (Sn 0.01% and Pd 0.006%) and the structure was stable during the continuous test, confirming that the Sn-Pd-Kaolinite catalyst had a superior reaction kinetics and operational durability.

Ecotoxicity of nanomaterials in amphibians: A critical review

Nanomaterials (NMs) have been used in a growing number of commercial products, and their rapid expansion could lead to their release into the aquatic environments. However, there is limited knowledge about the impact of NMs in the biota, especially the amphibians. The present study revised the historical use of amphibian species as a model system for nanoecotoxicological studies and summarized the data available in the scientific literature about the genotoxic, mutagenic, histopathological, embryotoxic and reproductive effects of NMs in different groups of amphibians. The interaction, bioaccumulation, mode of action (MoA) and ecotoxicity of NMs on amphibians were also revised. The nanoecotoxicological studies were conducted with 11 amphibian species, being eight species of the order Anura and three species of the order Caudata. Xenopus laevis was the most studied species. The studies were conducted mainly with inorganic NMs (72%) compared to organic ones. The nanoecotoxicity depends on NM behavior and transformation in the environment, as well as the developmental stages of amphibians. The known effects of NMs in amphibians were mainly reported with reactive oxygen species (ROS) production, oxidative stress, and genotoxic effects. Results emphasize the need for further studies testing the ecotoxicity of different NMs, concentrations and exposure periods at environmentally relevant approaches. Furthermore, standard protocols for nanoecotoxicological tests using amphibians are required. Revised data showed that amphibians are suitable organisms to assess the environmental impact of NMs and indicated significant research gaps concerning the ecotoxicity of NMs on freshwater ecosystems and recommendations for future researches.

Progress in Conductive Polyaniline-Based Nanocomposites for Biomedical Applications: A Review

Inherently conducting polymers (ICPs) are a specific category of synthetic polymers with distinctive electro-optic properties, which involve conjugated chains with alternating single and double bonds. Polyaniline (PANI), as one of the most well-known ICPs, has outstanding potential applications in biomedicine because of its high electrical conductivity and biocompatibility caused by its hydrophilic nature, low-toxicity, good environmental stability, and nanostructured morphology. Some of the limitations in the use of PANI, such as its low processability and degradability, can be overcome by the preparation of its blends and nanocomposites with various (bio)polymers and nanomaterials, respectively. This review describes the state-of-the-art of biological activities and applications of conductive PANI-based nanocomposites in the biomedical fields, such as antimicrobial therapy, drug delivery, biosensors, nerve regeneration, and tissue engineering. The latest progresses in the biomedical applications of PANI-based nanocomposites are reviewed to provide a background for future research.

Lethality, neurotoxicity, morphological, histological and cellular alterations of Ni-Al nanoceramics on the embryo-larval development of Rhinella arenarum

Alumina nanoparticles (NP-Al₂O₃) are widely used but their environmental effects are unknown, so they can become potentially dangerous. The aim of this study was to evaluate the toxicity of a nanoceramic catalyst Ni/γ-Al₂O₃ (NC) and NPs involved in their synthesis, γ-Al₂O₃ support (SPC) and NiO/γ-Al₂O₃ precursor (PC) on Rhinella arenarum embryo-larval development. The NPs toxicity significantly increased over time obtaining a similar sensitivity to PC and NC (336 h-LC50 = 4.03 and 5.11 mg/L respectively) and very low sensitivity to SPC (336 h-LC50 = 90.83 mg/L). Embryos exposed to SPC and PC exhibited general underdevelopment, axial flexures and behavioral alterations. Pharyngeal and intestinal epithelia alterations at the level of cell surface as dissociation, apoptosis and numerous lysosomes were observed at light and transmission electronic microscopy. Images of scanning electron microscope with backscattered electron detector revealed the presence of nickel in the intestinal epithelium. The increased toxicity of PC could be due to the presence of Ni as oxide which could interfere with vital functions such as breathing and feeding. Taking into account the exponential production and use of these NPs it is expected that their pollution levels will considerably increase and amphibians will be more exposed and at higher risk.

Toxicity Assessment of PEG-PCCL Nanoparticles and Preliminary Investigation on Its Anti-tumor Effect of Paclitaxel-Loading

The efficiency of single treatment of conventional chemotherapy drugs is unpleasantly reduced by the physiological barriers of tumors. In this regard, nanoparticles have become attractive for achieving such medical purpose of targeted cancer therapy by delivering anti-tumor agents to the needed area. A novel drug deliverer, poly (ethylene glycol) carboxyl-poly (ε-caprolactone) (PEG-PCCL), has been reported to be highly hydrophilic and stable, while little is known about its organic toxicity. This study focused on systemic toxicity assessments of PEG-PCCL. The pharmacokinetics of PTX-loaded PEG-PCCL (PEG-PCCL/PTX) and its anti-tumor effect were preliminarily investigated. In the present work, PEG-PCCL was characterized by laser particle size analyzer and transmission electron microscopy. The cytotoxicity was investigated by MTT test, LDH leakage assay, immunofluorescence, and transmission electron microscopy. Hemolysis, phlebitis, and organ toxicity tests were performed to demonstrate the biocompatibility and acute biotoxicity. H22 tumor-bearing mice were used to evaluate the pharmacokinetics of the micells of PEG-PCCL/PTX and its anti-tumor effect. The results showed that the size of PEG-PCCL nanospheres was 97 ± 2.6 nm. PEG-PCCL treatment showed little cytotoxicity and good biocompatibility, and did not exhibit organ toxicity. PTX-loading efficiency was 49.98%. The pharmacokinetic study on H22 tumor-bearing mice revealed that PEG-PCCL/PTX has higher stability and slower release than PTX alone. Together, these results suggest that PEG-PCCL nanosphere has little toxicity to organisms and is a potential candidate of biocompatible drug vehicle for hydrophobic drugs.

Synthesis of polyaniline (PANI) and functionalized polyaniline (F-PANI) nanoparticles with controlled size by solvent displacement method. Application in fluorescence detection and bacteria killing by photothermal effect

Polyaniline nanoparticles (PANI-NPs) were easily obtained applying the solvent displacement method by using N-methylpyrrolidone (NMP) as good solvent and water as poor solvent. Different polymers such as polyvinylpyrrolidone (PVP), chondroitin sulfate (ChS), polyvinyl alcohol (PVA), and polyacrylic acid (PAA) were used as stabilizers. Dynamic light scattering and scanning electron microscopy corroborated the size and morphology of the formed NPs. It was demonstrated that the size of nanoparticles could be controlled by setting the concentration of PANI in NMP, the NMP to water ratio, and the stabilizer's nature. The functionalization and fluorescence of NPs were checked by spectroscopic techniques. Since polyaniline show only weak intrinsic luminescence, fluorescent groups were linked to the polyaniline chains prior to the nanoparticle formation using a linker. Polyaniline chains were functionalized by nucleophilic addition of cysteamine trough the thiol group thereby incorporating pendant primary aliphatic amine groups to the polyaniline backbone. Then, dansyl chloride (DNS-Cl), which could act as an extrinsic chromophore, was conjugated to the amine pendant groups. Later, the functionalized polyaniline was used to produce nanoparticles by solvent displacement. The optical and functional properties of fluorescent nanoparticles (F-PANI-NPs) were determined. F-PANI-NPs in the conductive state (pH < 4) are able to absorb near infrared radiation (NIR) creating a photothermal effect in an aqueous medium. Thus, multifunctional nanoparticles are obtained. The application of NIR on a F-PANI-NPs dispersion in contact with Pseudomonas aeruginosa causes bacterial death. Therefore, the F-PANI-NPs could be tracked and applied to inhibit different diseases caused by pathogenic microorganisms and resistant to antibiotics as well as a new disinfection method to surgical materials.

Plasmonic Nanoprobe of (Gold Triangular Nanoprism Core)/(Polyaniline Shell) for Real-Time Three-Dimensional pH Imaging of Anterior Chamber

Three-dimensional (3D) molecular imaging enables the study of biological processes in both living and nonviable systems at the molecular level and has a high potential on early diagnosis. In conjunction with specific molecular probes, optical coherent tomography (OCT) is a promising imaging modality to provide 3D molecular features at the tissue level. In this study, we introduced (gold triangular nanoprism core)/(polyaniline shell) nanoparticles (GTNPs@PANI) as an OCT contrast agent and pH-responsive nanoprobe for 3D imaging of pH distribution. These core/shell nanoparticles possessed significantly different extinction and scattering properties in acidic and basic microenvironments. The switch of the optical features of the nanoparticles upon pH change was reversible, and the response time was less than 1.0 s. The nanoprobe successfully indicated the acid regions of a mimic tumor from the basic region in a gelatin-based phantom under OCT imaging. As a demonstration of practical applications, real-time 3D OCT imaging of pH and lactic acid in the anterior chamber of a fish eye was realized by GTNPs@PANI nanoparticles. Using GTNPs@PANI nanoparticles as the contrast probes for OCT imaging, noninvasive and real-time molecular imaging in both living and nonviable systems at the microscale can be achieved.

Ecotoxicity Effects of Nanomaterials on Aquatic Organisms

The increasing production and use of engineered nanomaterials raise concerns about inadvertent exposure and the potential for adverse effects on the aquatic environment. The aim of this chapter is focused on studies of nanotoxicity in different models of aquatic organisms and their impact. Moreover, the chapter provides an overview of nanoparticles, their applications, and the potential nanoparticle-induced toxicity in aquatic organisms. The topics discussed in this chapter are the physicochemical characteristic of nanomaterials (size, aggregation, morphology, surface charge, reactivity, dissolution, etc.) and their influence on toxicity. Further, the text discusses the direct effect of nanomaterials on development stage (embryonic and adult) in aquatic organisms, the mechanism of action as well as the toxicity data of nanomaterials in different species.f action as well as the toxicity data of nanomaterials in different species.

PVA/PANI/rGO ternary electrospun mats as metal-free anti-bacterial substrates

Successful performance of biocompatible hybrid systems in various biomedical applications such as wound healing patches, and scaffolds for stem cell preparation have been reported.

Dynamism of Stimuli-Responsive Nanohybrids: Environmental Implications

Nanomaterial science and design have shifted from generating single passive nanoparticles to more complex and adaptive multi-component nanohybrids. These adaptive nanohybrids (ANHs) are designed to simultaneously perform multiple functions, while actively responding to the surrounding environment. ANHs are engineered for use as drug delivery carriers, in tissue-engineered templates and scaffolds, adaptive clothing, smart surface coatings, electrical switches and in platforms for diversified functional applications. Such ANHs are composed of carbonaceous, metallic or polymeric materials with stimuli-responsive soft-layer coatings that enable them to perform such switchable functions. Since ANHs are engineered to dynamically transform under different exposure environments, evaluating their environmental behavior will likely require new approaches. Literature on polymer science has established a knowledge core on stimuli-responsive materials. However, translation of such knowledge to environmental health and safety (EHS) of these ANHs has not yet been realized. It is critical to investigate and categorize the potential hazards of ANHs, because exposure in an unintended or shifting environment could present uncertainty in EHS. This article presents a perspective on EHS evaluation of ANHs, proposes a principle to facilitate their identification for environmental evaluation, outlines a stimuli-based classification for ANHs and discusses emerging properties and dynamic aspects for systematic EHS evaluation.