Grid-based analysis of air pollution data

A Family of 2D-MXenes: Synthesis, Properties, and Gas Sensing Applications

Gas sensors, capable of detecting and monitoring trace amounts of gas molecules or volatile organic compounds (VOCs), are in great demand for numerous applications including diagnosing diseases through breath analysis, environmental and personal safety, food and agriculture, and other fields. The continuous emergence of new materials is one of the driving forces for the development of gas sensors. Recently, 2D materials have been gaining huge attention for gas sensing applications, owing to their superior electrical, optical, and mechanical characteristics. Especially for 2D MXenes, high specific area and their rich surface functionalities with tunable electronic structure make them compelling for sensing applications. This Review discusses the latest advancements in the 2D MXenes for gas sensing applications. It starts by briefly explaining the family of MXenes, their synthesis methods, and delamination procedures. Subsequently, it outlines the properties of MXenes. Then it describes the theoretical and experimental aspects of the MXenes-based gas sensors. Discussion is also extended to the relation between sensing performance and the structure, electronic properties, and surface chemistry. Moreover, it highlights the promising potential of these materials in the current gas sensing applications and finally it concludes with the limitations, challenges, and future prospects of 2D MXenes in gas sensing applications.

Multiparametric Sensor Node for Environmental Monitoring Based on Energy Harvesting

The heterogeneity and levels of chemicals released into the environment have dramatically grown in the last few years. Therefore, new low-cost tools are increasingly required to monitor pollution and follow its trends over time. Recent approaches in electronics and wireless communications permit the expansion of low-power, low-cost, and multiparametric sensor nodes that are limited in size and communicate untethered in small distances. For such a monitoring system to be ultimately feasible, a suitable power source for these nodes must be found. The present research falls within the frame of this global effort. The study sits within the context discussed above with the particular aim of developing groundbreaking technology-based solutions by means of efficient environmentally powered wireless smart sensors. This paper presents a multiparametric sensor node for indoor/outdoor air quality monitoring, able to work without battery and human intervention, harvesting energy from the surrounding environment for perpetual operation. The complete system design of the sensor and experimental results are reported. The evaluation of the energy-harvesting blocks with a budget allocation of the power consumption is also discussed.

Pollution Weather Prediction System: Smart Outdoor Pollution Monitoring and Prediction for Healthy Breathing and Living

Air pollution has been a looming issue of the 21st century that has also significantly impacted the surrounding environment and societal health. Recently, previous studies have conducted extensive research on air pollution and air quality monitoring. Despite this, the fields of air pollution and air quality monitoring remain plagued with unsolved problems. In this study, the Pollution Weather Prediction System (PWP) is proposed to perform air pollution prediction for outdoor sites for various pollution parameters. In the presented research work, we introduced a PWP system configured with pollution-sensing units, such as SDS021, MQ07-CO, NO2-B43F, and Aeroqual Ozone (O₃). These sensing units were utilized to collect and measure various pollutant levels, such as PM2.5, PM10, CO, NO₂, and O₃, for 90 days at Symbiosis International University, Pune, Maharashtra, India. The data collection was carried out between the duration of December 2019 to February 2020 during the winter. The investigation results validate the success of the presented PWP system. In the conducted experiments, linear regression and artificial neural network (ANN)-based AQI (air quality index) predictions were performed. Furthermore, the presented study also found that the customized linear regression methodology outperformed other machine-learning methods, such as linear, ridge, Lasso, Bayes, Huber, Lars, Lasso-lars, stochastic gradient descent (SGD), and ElasticNet regression methodologies, and the customized ANN regression methodology used in the conducted experiments. The overall AQI values of the air pollutants were calculated based on the summation of the AQI values of all the presented air pollutants. In the end, the web and mobile interfaces were developed to display air pollution prediction values of a variety of air pollutants.

Effect of Lockdown Measures on Atmospheric Nitrogen Dioxide during SARS-CoV-2 in Spain

The disease caused by SARS-CoV-2 has affected many countries and regions. In order to contain the spread of infection, many countries have adopted lockdown measures. As a result, SARS-CoV-2 has negatively influenced economies on a global scale and has caused a significant impact on the environment. In this study, changes in the concentration of the pollutant Nitrogen Dioxide (NO2) within the lockdown period were examined as well as how these changes relate to the Spanish population. NO2 is one of the reactive nitrogen oxides gases resulting from both anthropogenic and natural processes. One major source in urban areas is the combustion of fossil fuels from vehicles and industrial plants, both of which significantly contribute to air pollution. The long-term exposure to NO2 can also cause severe health problems. Remote sensing is a useful tool to analyze spatial variability of air quality. For this purpose, Sentinel-5P images registered from January to April of 2019 and 2020 were used to analyze spatial distribution of NO2 and its evolution under the lockdown measures in Spain. The results indicate a significant correlation between the population’s activity level and the reduction of NO2 values.

QoS Enabled IoT Based Low Cost Air Quality Monitoring System with Power Consumption Optimization

Air pollution has emerged as a major concern of the current century. In recent times, fellow researchers have conducted numerous researches in the area of air quality monitoring. Still, air quality monitoring remains an open research area due to various challenges such as sophisticated topology design, privacy and security, power backup, large memory requirements and deployment of such systems at resource-constrained sites. The proposed research work is an attempt to address the issues of communication topology design, assessment of the Quality of Service (QoS) levels against accuracy, sensing throughput and power consumption optimization. In the undertaken work, the proposed IoT based Air Quality Monitoring system has been deployed at indoor and outdoor sites to measure air quality parameters such as PM10, PM2.5, carbon monoxide, temperature and humidity. The proposed system is also tested at variety of quality of service levels at the indoor and outdoor sites. The conducted experiments have also recorded accuracy in terms of reliable delivery of the messages under employed protocol.

A Survey of Wireless Sensor Network Based Air Pollution Monitoring Systems

The air quality in urban areas is a major concern in modern cities due to significant impacts of air pollution on public health, global environment, and worldwide economy. Recent studies reveal the importance of micro-level pollution information, including human personal exposure and acute exposure to air pollutants. A real-time system with high spatio-temporal resolution is essential because of the limited data availability and non-scalability of conventional air pollution monitoring systems. Currently, researchers focus on the concept of The Next Generation Air Pollution Monitoring System (TNGAPMS) and have achieved significant breakthroughs by utilizing the advance sensing technologies, MicroElectroMechanical Systems (MEMS) and Wireless Sensor Network (WSN). However, there exist potential problems of these newly proposed systems, namely the lack of 3D data acquisition ability and the flexibility of the sensor network. In this paper, we classify the existing works into three categories as Static Sensor Network (SSN), Community Sensor Network (CSN) and Vehicle Sensor Network (VSN) based on the carriers of the sensors. Comprehensive reviews and comparisons among these three types of sensor networks were also performed. Last but not least, we discuss the limitations of the existing works and conclude the objectives that we want to achieve in future systems.

Effects of forest areas on air quality; Aras Basin and its environment

BACKGROUND

In the study, the Aras Basin and its environment, one of the most important hydrological basins of Turkey, was evaluated. In survey area, to determine the change of air quality, it was benefited from 23,770 pieces of hourly measured SO2 (Sulfur dioxide) and PM10 (particulate matter) concentration values for the December, January and February of 2009-2010 in which the pollution is at peak, by forming database in geographical information system (GIS), spatial analyze maps were attained. By comparing; maps showing attained numeral air quality and maps showing the spread of forest lands in the region, it was tried to determine the relation and interaction between air quality and forest lands.

RESULTS

The results indicated that the Air Quality Index (AQI) values were the lowest for the forest land in the months which mean that the forest land was the most convenient place for health. The increase the AQI, air pollution also increases. The results indicated that the air quality index changed from 1 to 4 within the region. In the forest areas, the AQI values for the months were the lowest. This indicated that the most suitable places for health are the places with a high forest coverage rates (76,50; 66,46 and 96,78%). There was no forest area within the region where the AQI values were the highest, so the risk was maximum, for the months.

CONCLUSIONS

Authorities should create new afforestation areas and rehabilitate degraded forest lands to limit air pollution by increasing the quality of urban life.

WikiSensing: an online collaborative approach for sensor data management

This paper presents a new methodology for collaborative sensor data management known as WikiSensing. It is a novel approach that incorporates online collaboration with sensor data management. We introduce the work on this research by describing the motivation and challenges of designing and developing an online collaborative sensor data management system. This is followed by a brief survey on popular sensor data management and online collaborative systems. We then present the architecture for WikiSensing highlighting its main components and features. Several example scenarios are described to present the functionality of the system. We evaluate the approach by investigating the performance of aggregate queries and the scalability of the system.

Correlation analysis of noise and ultrafine particle counts in a street canyon

Ultrafine particles (UFP, diameter<100 nm) are very likely to negatively affect human health, as underlined by some epidemiological studies. Unfortunately, further investigation and monitoring are hindered by the high cost involved in measuring these UFP. Therefore we investigated the possibility to correlate UFP counts with data coming from low-cost sensors, most notably noise sensors. Analyses are based on an experiment where UFP counts, noise levels, traffic counts, nitrogen oxide (NO, NO(2) and their combination NO(x)) concentrations, and meteorological data were collected simultaneously in a street canyon with a traffic intensity of 3200 vehicles/day, over a 3-week period during summer. Previous reports that NO(x) concentrations could be used as a proxy to UFP monitoring were verified in our setup. Traffic intensity or noise level data were found to correlate with UFP to a lesser degree than NO(x) did. This can be explained by the important influence of meteorological conditions (mainly wind and humidity), influencing UFP dynamics. Although correlations remain moderate, sound levels are more correlated to UFP in the 20-30 nm range. The particles in this size range have indeed rather short atmospheric residence times, and are thus more closely short-term traffic-related. Finally, the UFP estimates were significantly improved by grouping data with similar relative humidity and wind conditions. By doing this, we were able to devise noise indicators that correlate moderately with total particle counts, reaching a Spearman correlation of R=0.62. Prediction with noise indicators is even comparable to the more-expensive-to-measure NO(x) for the smallest UFP, showing the potential of using microphones to estimate UFP counts.

Air Pollution Monitoring and Mining Based on Sensor Grid in London

In this paper, we present a distributed infrastructure based on wireless sensors network and Grid computing technology for air pollution monitoring and mining, which aims to develop low-cost and ubiquitous sensor networks to collect real-time, large scale and comprehensive environmental data from road traffic emissions for air pollution monitoring in urban environment. The main informatics challenges in respect to constructing the high-throughput sensor Grid are discussed in this paper. We present a two-layer network framework, a P2P e-Science Grid architecture, and the distributed data mining algorithm as the solutions to address the challenges. We simulated the system in TinyOS to examine the operation of each sensor as well as the networking performance. We also present the distributed data mining result to examine the effectiveness of the algorithm.

Air Pollution Monitoring and Mining Based on Sensor Grid in London

In this paper, we present a distributed infrastructure based on wireless sensors network and Grid computing technology for air pollution monitoring and mining, which aims to develop low-cost and ubiquitous sensor networks to collect real-time, large scale and comprehensive environmental data from road traffic emissions for air pollution monitoring in urban environment. The main informatics challenges in respect to constructing the high-throughput sensor Grid are discussed in this paper. We present a twolayer network framework, a P2P e-Science Grid architecture, and the distributed data mining algorithm as the solutions to address the challenges. We simulated the system in TinyOS to examine the operation of each sensor as well as the networking performance. We also present the distributed data mining result to examine the effectiveness of the algorithm.