Uncovering hydrothermal treatment of per- and polyfluoroalkyl substances

Highly efficient removal of per- and polyfluoroalkyl substances by extrusion-regenerated aminated polyurethane sponges

Per- and polyfluoroalkyl substances (PFAS) are a class of persistent organic compounds widely detected in the environments. Due to their chemical stability, physical adsorption has emerged as one of the most promising techniques for remediating PFAS-containing wastewater, while some newly synthesized functional absorbents in powder form suffer from separation issues. Inspired by mussel biology, we have successfully synthesized a porous spongy absorbent termed aminated polyurethane (PU-PDA-PANI) with over 99.5% removal efficiency for initial 10 mg L-1 perfluorooctanoic acid (PFOA), corresponding to the maximum adsorption capacity of 1.42 g g-1, which was superior to the ion exchange resin (Purolite® PFA694E, 0.764 g g-1). In addition to PFOA, PU-PDA-PANI also showed excellent removal efficiencies for other typical PFAS (i.e. perfluorooctane sulfonates, perfluorobutyric acid, perfluorooctane-1,8-dioic acid, hexafluoropropylene oxide trimer acid, etc), and the adsorption processes resistant to pH changes and co-existing environmental matrixes. Furthermore, PU-PDA-PANI can be readily reused and regenerated by coupling extrusion and elution procedures. The adsorption mechanism of electrostatic, hydrogen bond and hydrophobic synergistic interaction was further proposed with the support of theoretical calculation. In conclusion, this study develops an efficient and recyclable PFAS adsorbent and proposes some new insights for the design of PFAS-selective adsorbents.

Perfluorooctanoic acid transport and fate difference driven by iron-sulfide minerals transformation interacting with different types of groundwater

Perfluorooctanoic acid (PFOA) is an emerging persistent organic pollutant that threatens human health and ecosystems. However, the intricate mechanism of the change in PFOA transport behavior that interacts with FexSy minerals under groundwater-type differences is not clear. To address this knowledge gap, multi-scale experiments and multi-process reaction models were constructed to investigate the underlying mechanisms. The results showed that different groundwater (NO3-, Cl--Na+, SO42-, and HCO3- types) had significant effects on PFOA transport. NO3-, Cl--Na+, SO42-, and HCO3- decreased the retardation effect of PFOA in the FexSy media. Compared to other groundwater types, the adsorption sites of FexSy were the least occupied in the NO3- groundwater. This observation was supported by the least inhabition of λ in FexSy-NO3- interaction system, which demonstrated that more PFOA was in a high reaction zone and electrostatic repulsion was weakest. The surface tension of different ion types in groundwater provided evidence explaining the lowest inhibition in the FexSy-NO3- system. The 2D spatiotemporal evolution results showed that in FexSy with NO3- system, the pollutant flux (6.00 ×10-5 mg·(m2·s)-1) was minimal. The pollutant flux in the SO42- groundwater system was 9.95-fold that in FexSy with the NO3- groundwater. These findings provide theoretical support for understanding the transport and fate of PFOA in FexSy transformations that interact with different types of groundwater.

Superb green cycling strategies for microbe-Fe0 neural network-type interaction: Harnessing eight key genes encoding enzymes and mineral transformations to efficiently treat PFOA

To address time-consuming and efficiency-limited challenges in conventional zero-valent iron (ZVI, Fe0) reduction or biotransformation for perfluorooctanoic acid (PFOA) treatment, two calcium alginate-embedded amendments (biochar-immobilized PFOA-degrading bacteria (CB) and ZVI (CZ)) were developed to construct microbe-Fe0 high-rate interaction systems. Interaction mechanisms and key metabolic pathways were systematically explored using metagenomics and a multi-process coupling model for PFOA under microbe-Fe0 interaction. Compared to Fe0 (0.0076 day-1) or microbe (0.0172 day-1) systems, the PFOA removal rate (0.0426 day-1) increased by 1.5 to 4.6 folds in the batch microbe-Fe0 interaction system. Moreover, Pseudomonas accelerated the transformation of Fe0 into Fe3+, which profoundly impacted PFOA transport and fate. Model results demonstrated microbe-Fe0 interaction improved retardation effect for PFOA in columns, with decreased dispersivity a (0.48 to 0.20 cm), increased reaction rate λ (0.15 to 0.22 h-1), distribution coefficient Kd (0.22 to 0.46 cm3∙g-1), and fraction f´(52 % to 60 %) of first-order kinetic sorption of PFOA in microbe-Fe0 interaction column system. Moreover, intermediates analysis showed that microbe-Fe0 interaction diversified PFOA reaction pathways. Three key metabolic pathways (ko00362, ko00626, ko00361), eight functional genes, and corresponding enzymes for PFOA degradation were identified. These findings provide insights into microbe-Fe0 "neural network-type" interaction by unveiling biotransformation and mineral transformation mechanisms for efficient PFOA treatment.

Cutting-edge technologies and relevant reaction mechanism difference in treatment of long- and short-chain per- and polyfluoroalkyl substances: A review

Per- and polyfluoroalkyl substances (PFAS) are emerging contaminants. Compared with short-chain PFAS, long-chain PFAS are more hazardous. Currently, little attention has been paid to the differences in reaction mechanisms between long-chain and short-chain PFAS. This pressing concern has prompted studies about eliminating PFAS and revealing the mechanism difference. The reaction rate and reaction mechanism of each technology was focused on, including (1) adsorption, (2) ion exchange (IX), (3) membrane filtration, (4) advanced oxidation, (5) biotransformation, (6) novel functional material, and (7) other technologies (e.g. ecological remediation, hydrothermal treatment (HT), mechanochemical (MC) technology, micro/nanobubbles enhanced technology, and integrated technologies). The greatest reaction rate k of photocatalysis for long- and short-chain PFAS high up to 63.0 h-1 and 19.7 h-1, respectively. However, adsorption, membrane filtration, and novel functional material remediation were found less suitable or need higher operation demand for treating short-chain PFAS. Ecological remediation is more suitable for treating natural waterbody for its environmentally friendly and fair reaction rate. The other technologies all showed good application potential for both short- and long-chain PFAS, and it was more excellent for long-chain PFAS. The long-chain PFAS can be cleavaged into short-chain PFAS by C-chain broken, -CF2 elimination, nucleophilic substitution of F-, and HF elimination. Furthermore, the application of each type of technology was novelly designed; and suggestions for the future development of PFAS remediation technologies were proposed.