Enhancement of griseofulvin release from liquisolid compacts

Liquisolid Technique: A Novel Technique with Remarkable Applications in Pharmaceutics

Recently, it has been observed that newly developed drugs are lipophilic and have low aqueous solubility issues, which results in a lower dissolution rate and bioavailability of the drugs. To overcome these issues, the liquisolid technique, an innovative and advanced approach, comes into play. This technique involves the conversion of the drug into liquid form by dissolving it in non-volatile solvent and then converting the liquid medication into dry, free-flowing, and compressible form by the addition of carrier and coating material. It offers advantages like low cost of production, easy method of preparation, and compactable with thermo labile and hygroscopic drugs. It has been widely applied for BCS II drugs to enhance dissolution profile. Improving bioavailability, providing sustained release, minimizing pH influence on drug dissolution, and improving drug photostability are some of the other promising applications of this technology. This review article presents an overview of the liquisolid technique and its applications in formulation development.

Quality-by-Design-Based Development of Rivaroxaban-Loaded Liquisolid Compact Tablets with Improved Biopharmaceutical Attributes

Rivaroxaban (RXN) finds use in the management of pulmonary embolism and deep vein thrombosis. Its poor solubility (5-7 µg/mL) and P-gp-mediated efflux from intestinal lining limits the oral application of RXN. This work assessed the impact of liquisolid compact technique in augmenting the solubility and bioavailability of RXN. PEG 400, Avicel PH 200, and Aerosil 200 were used as non-volatile liquid, carrier, and coating material, respectively, to formulate RXN liquid-solid compacts (RXN LSCs). A 32-factor factorial design was used in the optimisation to assess the impacts of factors (load factor and carrier:coating ratio) on the responses (angle of repose and Q30 min). Pre-compression parameters of RXN LSCs suggested adequate flow and compressibility. Optimisation data suggested significant influence of factors on both the responses. Optimised RXN LSC-based tablets showed a significantly higher in vitro dissolution rate than RXN API and Xarelto® tablets due to improved solubility, reduced crystallinity, greater surface area, and enhanced wetting of RXN particles. XRD, DSC, and SEM data supported RXN's amorphization. The cytotoxicity (MTT assay) and permeation studies indicated the nontoxicity of prepared RXN LSC tablets and the role of PEG 400 in inhibiting P-gp. Pharmacokinetic study of RXN LSC-based tablets in Albino Wistar rats exhibited 2.51- and 1.66-times higher AUC in comparison to RXN API and Xarelto® tablets respectively, demonstrating that developed formulation had a greater oral bioavailability. The RXN LSC tablets showed longer bleeding times and higher rates of platelet aggregation than RXN API. Thus, RXN LSC tablets can be considered a facile, scalable technology.

Liquisolid systems: Evaluation of the influence of formulation variables on the optimum liquid load

Liquisolid systems represent an emerging approach in the preparation of solid dosage forms with liquid lipophilic drug or poorly water-soluble drug solution/suspension in suitable liquid vehicle. This study addresses the lack of data regarding the compaction behavior of liquisolid systems, with the aim to investigate the influence of liquid load, carrier to coating ratio, carrier type (microcrystalline cellulose vs. spray dried calcium hydrogen phosphate, anhydrous (Fujicalin®)) on flowability and compaction properties of liquisolid systems and to determine the optimum liquid loads. Liquisolid admixtures with Fujicalin® showed notably better flowability than those with microcrystalline cellulose. An increase in carrier to coating ratio led to enhanced flowability of the admixtures. Compacts with Fujicalin® had good mechanical properties up to 24.7% liquid, while those with microcrystalline cellulose had acceptable mechanical strength up to 16.2% liquid. Liquisolid systems with Fujicalin® showed similar tabletability profiles as those with microcrystalline cellulose, despite having higher liquid content. The ejection stress values indicated that the addition of lubricant might be needed in the case of liquisolid systems with Fujicalin®. Superior properties of Fujicalin® as a carrier for liquisolid tablets were revealed, and dynamic compaction analysis was found to be a valuable tool for the assessment of compaction behavior of liquisolid systems.

Liquisolid systems as a novel approach in formulation and manufacturing of solid dosage forms: Challenges and perspectives

Liquisolid systems are a novel, promising platform for the production of solid dosage forms with a high liquid content, i.e. dispersion of the drug in a suitable, hydrophilic, non-volatile liquid vehicle or liquid drug. This technology requires conventional, but highly porous excipients (carrier and coating material in the appropriate ratio) able to absorb/adsorb liquid medication, resulting in both good flowability and acceptable compression properties. This approach has shown great potential to improve the dissolution rate and bioavailability of poorly soluble drugs, and has been recognized as a good alternative to common, more complex and expensive techniques. A variety of applications of this simple technique have been investigated recently, including the preparation of: modified release tablets, orally disintegrating tablets, solid dosage forms with liquid herbal extracts, etc. This emerging technology has numerous advantages, and the most important are: simplicity, cost-effectiveness, applicability in large scale production and environmental friendliness. However, it is accompanied by certain challenges as well, such as limited applicability in the case of highly dosed drugs. This article aims to give a comprehensive overview of recent progress regarding the potential applications of this technology, as well as to give an insight into the new liquisolid-based techniques intending to further support its commercial applicability.

Application of a liquisolid technique to cannabis sativa extract compacts: Effect of liquid vehicles on the dissolution enhancement and stability of cannabinoids

This work describes the application of liquisolid technique to enhance cannabinoid dissolution from Cannabis sativa L. (CS) compacts. Effects of five vehicles, namely, volatile (ethanol) and nonvolatile (caprylocaproyl macrogolglycerides, polyethylene glycol 400, oleoyl macrogolglycerides and polysorbate 20) liquids, on tablet properties, dissolution and stability were investigated. The viscid oleoresin CS extract was mixed with vehicles before being transformed into free-flowing powder by the use of microcrystalline cellulose and colloidal silica as carrier and coating materials. Liquid vehicles had a nonsignificant effect on liquid load factor of CS extract. CS liquisolid compacts had acceptable tableting properties in terms of weight variation, friability, hardness, content uniformity and disintegration time. Different vehicles affected the hardness, disintegration, and wettability of CS compacts and thus the dissolution behaviors of cannabinoids to different extents. Dissolutions of cannabinoids from CS compacts were rate-limited by the disintegration process. Liquisolid formulations using nonvolatile liquids with low polarity or high hydrophilic-lipophilic balance yielded more than 90% cannabinoid dissolution. Stability studies revealed nonsignificant changes in tablet characteristics, cannabinoid content and dissolutions of CS compacts when stored at 5 ± 3 °C for 3 months. This work presents a general concept of how to successfully formulate CS extract with cannabinoid dissolution enhancement characteristics.

Evaluation of the effect of carrier material on modification of release characteristics of poor water soluble drug from liquisolid compacts

Liquisolid compact is a novel dosage form in which a liquid medication (liquid drug, drug solution/dispersion in non-volatile solvent/solvent system) is converted to a dry, free flowing powder and compressed. Objective of the study was to elucidate the effect of carrier material on release characteristics of clopidogrel from liquisolid compacts. Different formulations of liquisolid compacts were developed using microcrystalline cellulose, starch maize, polyvinyl pyrollidone and hydroxypropyl methylcellulose as carrier material in three concentrations (40, 30 and 20%, w/w). Liquid vehicle was selected on the basis of solubility of clopidogrel. Colloidal silicondioxide was used as coating material and ratio of carrier to coating material was kept 10. A control formulation comprised of microcrystalline cellulose (diluents), tabletose-80 (diluents), primojel (disintegrant) and magnesium stearate (lubricant) was prepared by direct compression technique and was used for comparison. All the formulations were evaluated at pre and post compression level. Acid solubility profile showed higher solubility in HCl buffer pH2 (296.89±3.49 μg/mL). Mixture of propylene glycol and water (2:1, v/v) was selected as liquid vehicle. Drug content was in the range of 99–101% of the claimed quantity. All the formulations showed better mechanical strength and their friability was within the official limits (<1%). Microcrystalline cellulose and starch maize resulted in faster drug release while polyvinyl pyrollidone and HPMC resulted in sustaining drug release by gel formation. It is concluded from results that both fast release and sustained release of clopidogrel can be achieved by proper selection of carrier material.

The importance of the coating material type and amount in the preparation of liquisolid systems based on magnesium aluminometasilicate carrier

Albeit the preparation of liquisolid systems represents an innovative approach to enhance the dissolution of poorly soluble drugs, their broader utilization is still limited mainly due to the problematic conversion of the liquid into freely flowing and readily compressible powder. Accordingly, the presented study aims to determine the optimal carrier/coating material ratio (R value) for formulations based on magnesium aluminometasilicate (NUS2) loaded with polyethylene glycol 400. Four commercially available colloidal silica were used as coating materials in nine different R values (range of 5 - 100). The obtained results suggested that the higher R value leads to the superior properties of powder mixtures, such as better flowability, as well as compacts with higher tensile strength and lower friability. Moreover, it was observed that the type of coating material impacts the properties of liquisolid systems due to the different arrangement of particles in the liquisolid mixture. To confirm the noted dependency of R value and coating material type, the one- and two-way ANOVA, linear regression and principal component analysis (PCA) techniques were performed. In addition, a comparison of results with the properties of loaded NUS2 itself revealed that LSS with sufficient properties may be prepared even without the coating material.

An Investigation into the Influence of Process Parameters and Formulation Variables on Compaction Properties of Liquisolid Systems

Liquisolid technology, as a promising approach for bioavailability enhancement, has received increasing attention in recent years. However, literature reports addressing the challenges for its industrial application, particularly those related to compaction behavior of liquisolid systems, are scarce. The aim of this study was to investigate the influence of process parameters and formulation variables on the flowability, wetting, and compaction properties of the liquisolid systems prepared in a fluid bed processor. The experiments with microcrystalline cellulose, as a carrier, were performed according to 2³ full factorial design. The effects of liquid content, spray air pressure, and liquid feed rate on the properties of liquisolid systems were investigated. Liquisolid admixtures with microcrystalline cellulose were compared with those prepared with novel carriers, Fujicalin^® and Neusilin^® US2. "Out-die" Heckel, modified Walker, and Kuentz-Leuenberger models were used to analyze the compressibility of liquisolid admixtures. The results obtained showed that an increase in liquid content (in the range of 10 to 15%) led to a decrease in flowability of liquisolid admixtures with microcrystalline cellulose, as well as more pronounced influence of spraying conditions. On the other hand, higher liquid content led to higher compressibility. Fujicalin^® and Neusilin^® US2 liquisolid admixtures were found to have superior flowability and compressibility in comparison with those with microcrystalline cellulose, despite the considerably higher liquid load (50-55% liquid content in Neusilin^® US2 compacts). Acceptable compactibility of the investigated liquisolid systems was observed. The fluid bed processor was shown to be suitable equipment for production of liquisolid systems, but with careful adjustment of process parameters.

Formulation and optimization of liquisolid compact for enhancing dissolution properties of efavirenz by using DoE approach

Efavirenz displays low and variable bioavailability because of its poor aqueous solubility and high log P-value. The present investigation was aimed to improve the dissolution profile of efavirenz by using a simple, scalable and cost-effective technique of liquisolid compact. The drug was dissolved in Trancutol-HP for preparing the liquid medicament which was subsequently mixed with carrier and coating material to make free-flowing and compressible powder. 3² full factorial design was used to optimize the formulation in which the Neusilin US2/Corn starch ratios and carrier/coating material ratio were selected as independent variables. The results of in-vitro dissolution test proved that liquisolid compacts have significantly higher dissolution rate than tablets containing pure drug. Results of DSC and XRD studies suggested that the high dissolution of the drug from the liquisolid compacts was possibly because of the drug either being in an amorphous state or being molecularly dispersed within the internal matrix of compacts.

Development and Characterization of Liquisolid Tablets Based on Mesoporous Clays or Silicas for Improving Glyburide Dissolution

The aim of this work was to evaluate the effectiveness of mesoporous clays or silicas to develop fast-dissolving glyburide tablets based on a liquisolid approach. Selected clay (Neusilin^®US2) and silica (Aeroperl^®300) allowed preparation of innovative drug liquisolid systems containing dimethylacetamide or 2-pyrrolidone as drug solvents, without using coating materials which are necessary in conventional systems. The obtained liquisolid powders were characterized for solid-state properties, flowability, compressibility, morphology, granulometry, and then used for directly compressed tablet preparation. The developed liquisolid tablets provided a marked drug dissolution increase, reaching 98% dissolved drug after 60 min, compared to 40% and 50% obtained from a reference tablet containing the plain drug, and a commercial tablet. The improved glyburide dissolution was attributed to its increased wetting properties and surface area, due to its amorphization/solubilization within the liquisolid matrix, as confirmed by DSC and PXRD studies. Mesoporous clay and silica, owing to their excellent adsorbent, flow, and compressibility properties, avoided use of coating materials and considerably improved liquid-loading capacity, reducing the carrier amount necessary to obtain freely flowing powders. Neusilin^®US2 showed a superior performance than Aeroperl^®300 in terms of the tablet’s technological properties. Finally, simplicity and cost-effectiveness of the proposed approach make it particularly advantageous for industrial scale-up.

Recent Strategic Developments in the Use of Superdisintegrants for Drug Delivery

Improving drug bioavailability in the pharmaceutical field is a challenge that has attracted substantial interest worldwide. The controlled release of a drug can be achieved with a variety of strategies and novel materials in the field. In addition to the vast development of innovative materials for improving therapeutic effects and reducing side effects, the exploration of remarkable existing materials could encourage the discovery of diverse approaches for adapted drug delivery systems. Recently, superdisintegrants have been proposed for drug delivery systems as alternative approaches to maximize the efficiency of therapy. Although superdisintegrants are well known and used in solid dosage forms, studies on strategies for the development of drug delivery systems using superdisintegrants are lacking. Therefore, this study reviews the use of superdisintegrants in controlled drug release dosage formulations. This overview of superdisintegrants covers developed strategies, types (including synthetic and natural materials), dosage forms and techniques and will help to improve drug delivery systems.

Pharmaceutical Dispersion Techniques for Dissolution and Bioavailability Enhancement of Poorly Water-Soluble Drugs

Over the past decades, a large number of drugs as well as drug candidates with poor dissolution characteristics have been witnessed, which invokes great interest in enabling formulation of these active ingredients. Poorly water-soluble drugs, especially biopharmaceutical classification system (BCS) II ones, are preferably designed as oral dosage forms if the dissolution limit can be broken through. Minimizing a drug’s size is an effective means to increase its dissolution and hence the bioavailability, which can be achieved by specialized dispersion techniques. This article reviews the most commonly used dispersion techniques for pharmaceutical processing that can practically enhance the dissolution and bioavailability of poorly water-soluble drugs. Major interests focus on solid dispersion, lipid-based dispersion (nanoencapsulation), and liquisolid dispersion (drug solubilized in a non-volatile solvent and dispersed in suitable solid excipients for tableting or capsulizing), covering the formulation development, preparative technique and potential applications for oral drug delivery. Otherwise, some other techniques that can increase the dispersibility of a drug such as co-precipitation, concomitant crystallization and inclusion complexation are also discussed. Various dispersion techniques provide a productive platform for addressing the formulation challenge of poorly water-soluble drugs. Solid dispersion and liquisolid dispersion are most likely to be successful in developing oral dosage forms. Lipid-based dispersion represents a promising approach to surmounting the bioavailability of low-permeable drugs, though the technique needs to traverse the obstacle from liquid to solid transformation. Novel dispersion techniques are highly encouraged to develop for formulation of poorly water-soluble drugs.

Novel Method of Preparation and Activity Research on Arctigenin from Fructus Arctii

Background:

Arctigenin has many pharmacological activities with clinical significance and is derived from Arctium lappa L. However, the present extraction method is inefficient and does not have meaningful industrial production.

Objective:

A new method to directly prepare arctigenin was established by combining enzyme-assisted extraction and central composite design. Arctigenin's further pharmacological activity was also surveyed in vitro.

Materials and Methods:

β-D-Glucosidase, a food-grade enzyme, was added directly to the fruits of A. lappa L. to hydrolyze the arctiin to arctigenin, and the obtained samples were subsequently subjected to ethanol (30%, v/v) extraction. The pharmacological activity of the extraction and arctigenin was determined by inhibiting acetylcholinesterase (AChE) and scavenging nitrite.

Results:

The factors investigated include the enzyme concentration (0.5%–2.5%), ultrasound time (10 min⁻³ 0 min), and extraction temperature (30°C–50°C). From the analysis of the results by Design-Expert (V8.0.6), the optimal extraction conditions were obtained: enzyme concentration (1.4%), ultrasound time (25 min), and extraction temperature (45°C). The highest yield of arctigenin, obtained under the optimal conditions was 6.39%, representing an increase of 28.15% compared to the reference extraction without enzyme processing. The IC₅₀ values of the extraction and arctigenin, respectively, for inhibiting AChE were 0.572 mg/ml and 0.462 mg/ml, and those for nitrite-scavenging were 34.571 mg/ml and 17.49 mg/ml.

Conclusions:

The results demonstrate that using an enzyme directly in the production is an effective means for extracting arctigenin from Fructus arctii. The extraction has the activities of inhibiting AChE and scavenging nitrite, probably because there has arctigenin in it. It is implied that the extraction and arctigenin could contribute to human health in clinical applications.

SUMMARY

The new method of adding enzyme directly to the preparation of arctigenin was carried out instead of preparing arctigenin by two-step method

Three factors affecting the efficiency of preparation were analyzed and discussed include the enzyme concentration, ultrasound time, and extraction temperature by central composite design

This new method of preparing arctigenin improved the yield significantly than other methods

Arctigenin has remarkable pharmacological activities of inhibiting acetylcholinesterase and scavenging nitrite.

Abbreviations used: AChE: Acetylcholinesterase, CCD: Central composite design, TCM: Traditional Chinese medicines, AD:

Investigation of Dissolution Behavior HPMC/Eudragit®/Magnesium Aluminometasilicate Oral Matrices Based on NMR Solid-State Spectroscopy and Dynamic Characteristics of Gel Layer

Burst drug release is often considered a negative phenomenon resulting in unexpected toxicity or tissue irritation. Optimal release of a highly soluble active pharmaceutical ingredient (API) from hypromellose (HPMC) matrices is technologically impossible; therefore, a combination of polymers is required for burst effect reduction. Promising variant could be seen in combination of HPMC and insoluble Eudragits^® as water dispersions. These can be applied only on API/insoluble filler mixture as over-wetting prevention. The main hurdle is a limited water absorption capacity (WAC) of filler. Therefore, the object of this study was to investigate the dissolution behavior of levetiracetam from HPMC/Eudragit^®NE matrices using magnesium aluminometasilicate (Neusilin^® US2) as filler with excellent WAC. Part of this study was also to assess influence of thermal treatment on quality parameters of matrices. The use of Neusilin^® allowed the application of Eudragit^® dispersion to API/Neusilin^® mixture in one step during high-shear wet granulation. HPMC was added extragranularly. Obtained matrices were investigated for qualitative characteristics, NMR solid-state spectroscopy (ssNMR), gel layer dynamic parameters, SEM, and principal component analysis (PCA). Decrease in burst effect (max. of 33.6%) and dissolution rate, increase in fitting to zero-order kinetics, and paradoxical reduction in gel layer thickness were observed with rising Eudragit^® NE concentration. The explanation was done by ssNMR, which clearly showed a significant reduction of the API particle size (150-500 nm) in granules as effect of surfactant present in dispersion in dependence on Eudragit^®NE amount. This change in API particle size resulted in a significantly larger interface between these two entities. Based on ANOVA and PCA, thermal treatment was not revealed as a useful procedure for this system.

The Development of Self-nanoemulsifying Liquisolid Tablets to Improve the Dissolution of Simvastatin

The aim of this work was to develop self-nanoemulsifying liquisolid tablets (SNELT) to enhance the dissolution profile of poorly water-soluble simvastatin. SNELT present a unique technique of incorporating self-nanoemulsifying drug delivery systems (SNEDDS) into tablets. Optimized SNEDDS containing different oils, Cremophor^® RH 40 (surfactant) and Transcutol^® HP (co-surfactant), at different ratios, were used as liquid vehicles and loaded on carrier material, microcrystalline cellulose (MCC), and coating material, Cab-o-sil^® H-5 (nanosize colloidal silicon dioxide) powders at different loading factors (L _f ) and fixed excipient ratio (R = 20). The effect of using different carrier materials, granulated mannitol, crystalline mannitol, and maltodextrin with MCC at different ratios, and different coating materials, Aeroperl^® 300 (granulated silicon dioxide) at different excipient ratios (R), was also emphasized. Liquisolid powders with acceptable flowability, compressibility, and tablet weight were compressed into tablets. Results revealed that powders with L _f  = 0.2 possessed the most preferable properties to be tableted. SNELT with MCC and Cab-o-sil^® H-5 were able to generate nanoemulsions and to enhance the cumulative percent of drug dissolved at 60 min significantly to reach up to 90%. Furthermore, using carrier material (granulated mannitol/MCC at ratio 3:1) enabled SNELT to disperse into nanoemulsion (Z-average = 25.7 nm) and improved the dissolution profile significantly to reach 99% at 60 min. Cab-o-sil^® H-5 proved to be a better coating material compared to Aeroperl^® 300. In conclusion, developed SNELT were promising in enhancing in vitro dissolution of simvastatin and excipients highly affect SNELT's performance.

Liquisolid technique and its applications in pharmaceutics

Most of the newly developed drug candidates are lipophilic and poorly water-soluble. Enhancing the dissolution and bioavailability of these drugs is a major challenge for the pharmaceutical industry. Liquisolid technique, which is based on the conversion of the drug in liquid state into an apparently dry, non-adherent, free flowing and compressible powder, is a novel and advanced approach to tackle the issue. The objective of this article is to present an overview of liquisolid technique and summarize the progress of its applications in pharmaceutics. Low cost, simple processing and great potentials in industrial production are main advantages of this approach. In addition to the enhancement of dissolution rate of poorly water-soluble drugs, this technique is also a fairly new technique to effectively retard drug release. Furthermore, liquisolid technique has been investigated as a tool to minimize the effect of pH variation on drug release and as a promising alternative to conventional coating for the improvement of drug photostability in solid dosage forms. Overall, liquisolid technique is a newly developed and promising tool for enhancing drug dissolution and sustaining drug release, and its potential applications in pharmaceutics are still being broadened.

Dissolution enhancement of tadalafil by liquisolid technique

This study aimed to enhance the dissolution of tadalafil, a poorly water-soluble drug by applying liquisolid technique. The effects of two critical formulation variables, namely drug concentration (17.5% and 35%, w/w) and excipients ratio (10, 15 and 20) on dissolution rates were investigated. Pre-compression tests, including particle size distribution, flowability determination, Fourier transform infrared (FT-IR), differential scanning calorimetry (DSC), X-ray diffractometry (XRD) and scanning electron microscopy (SEM), were carried out to investigate the mechanism of dissolution enhancement. Tadalafil liquisolid tablets were prepared and their quality control tests, dissolution study, contact angle measurement, Raman mapping, and storage stability test were performed. The results suggested that all the liquisolid tablets exhibited significantly higher dissolution rates than the conventional tablets and pure tadalafil. FT-IR spectrum reflected no drug-excipient interactions. DSC and XRD studies indicated reduction in crystallinity of tadalafil, which was further confirmed by SEM and Raman mapping outcomes. The contact angle measurement demonstrated obvious increase in wetting property. Taken together, the reduction of particle size and crystallinity, and the improvement of wettability were the main mechanisms for the enhanced dissolution rate. No significant changes were observed in drug crystallinity and dissolution behavior after storage based on XRD, SEM and dissolution results.

Design and Characterization of Buccoadhesive Liquisolid System of an Antihypertensive Drug

Nifedipine is an antihypertensive BCS class II drug which has poor bioavailability when given orally. The objective of the present study was to increase the bioavailability of nifedipine, by formulation and evaluation of a buccoadhesive liquisolid system using magnesium aluminium silicate (Neusilin) as both carrier and coating material and dissolution media were selected based on the solubility studies. A mixture of carboxymethylcellulose sodium and carbomer was used as mucoadhesive polymers. Buccoadhesive tablets were prepared by direct compression. FTIR studies confirmed no interaction between drug and excipients. XRD studies indicated change/reduction in crystallinity of drug. The powder characteristics were evaluated by different flow parameters to comply with pharmacopoeial specifications. The dissolution studies for liquisolid compacts and tablet formulations were carried out and it was found that nifedipine liquisolid tablets formulated from bioadhesive polymers containing 49% liquisolid system, 17.5% carbomer, and 7.5% carboxymethylcellulose sodium showed the best results in terms of dissolution properties. Prepared formulation batches were evaluated for swelling, bioadhesion strength, ex vivo residence time, and permeability studies. The optimized batch was showing promising features of the system. Formulating nifedipine as a buccoadhesive tablet allows reduction in dose and offers better control over the plasma levels.

The effect of superdisintegrants on the properties and dissolution profiles of liquisolid tablets containing rosuvastatin

CONTEXT

The preparation of liquisolid systems (LSS) represents a promising method for enhancing a dissolution rate and bioavailability of poorly soluble drugs. The release of the drug from LSS tablets is affected by many factors, including the disintegration time.

OBJECTIVE

The evaluation of differences among LSS containing varying amounts and types of commercially used superdisintegrants (Kollidon® CL-F, Vivasol® and Explotab®).

MATERIALS AND METHODS

LSS were prepared by spraying rosuvastatin solution onto Neusilin® US2 and further processing into tablets. Varying amounts of superdisintegrants were used and the differences among LSS were evaluated. The multiple scatter plot method was used to visualize the relationships within the obtained data.

RESULTS AND DISCUSSION

All disintegrants do not showed negative effect on the flow properties of powder blends. The type and concentration of superdisintegrant had an impact on the disintegration time and dissolution profiles of tablets. Tablets with Explotab® showed the longest disintegration time and the smallest amount of released drug. Fastest disintegration and dissolution rate were observed in tablets containing Kollidon® CL-F (≥2.5% w/w). Also tablets with Vivasol® (2.5-4.0% w/w) showed fast disintegration and complete drug release.

CONCLUSION

Kollidon® CL-F and Vivasol® in concentration ≥2.5% are suitable superdisintegrants for LSS with enhanced release of drug.

Modern evaluation of liquisolid systems with varying amounts of liquid phase prepared using two different methods

Liquisolid systems are an innovative dosage form used for enhancing dissolution rate and improving in vivo bioavailability of poorly soluble drugs. These formulations require specific evaluation methods for their quality assurance (e.g., evaluation of angle of slide, contact angle, or water absorption ratio). The presented study is focused on the preparation, modern in vitro testing, and evaluation of differences of liquisolid systems containing varying amounts of a drug in liquid state (polyethylene glycol 400 solution of rosuvastatin) in relation to an aluminometasilicate carrier (Neusilin US2). Liquisolid powders used for the formulation of final tablets were prepared using two different methods: simple blending and spraying of drug solution onto a carrier in fluid bed equipment. The obtained results imply that the amount of liquid phase in relation to carrier material had an effect on the hardness, friability, and disintegration of tablets, as well as their height. The use of spraying technique enhanced flow properties of the prepared mixtures, increased hardness values, decreased friability, and improved homogeneity of the final dosage form.

Formulation strategies to improve the bioavailability of poorly absorbed drugs with special emphasis on self-emulsifying systems

Poorly water-soluble drug candidates are becoming more prevalent. It has been estimated that approximately 60–70% of the drug molecules are insufficiently soluble in aqueous media and/or have very low permeability to allow for their adequate and reproducible absorption from the gastrointestinal tract (GIT) following oral administration. Formulation scientists have to adopt various strategies to enhance their absorption. Lipidic formulations are found to be a promising approach to combat the challenges. In this review article, potential advantages and drawbacks of various conventional techniques and the newer approaches specifically the self-emulsifying systems are discussed. Various components of the self-emulsifying systems and their selection criteria are critically reviewed. The attempts of various scientists to transform the liquid self-emulsifying drug delivery systems (SEDDS) to solid-SEDDS by adsorption, spray drying, lyophilization, melt granulation, extrusion, and so forth to formulate various dosage forms like self emulsifying capsules, tablets, controlled release pellets, beads, microspheres, nanoparticles, suppositories, implants, and so forth have also been included. Formulation of SEDDS is a potential strategy to deliver new drug molecules with enhanced bioavailability mostly exhibiting poor aqueous solubility. The self-emulsifying system offers various advantages over other drug delivery systems having potential to solve various problems associated with drugs of all the classes of biopharmaceutical classification system (BCS).

Toward a detailed characterization of oil adsorbates as "solid liquids"

Solid lipid formulation systems are used to overcome oral bioavailability problems of poorly water-soluble drugs. One promising process is the conversion of a liquid lipid system in a free flowing powder by use of adsorbing excipients. The aim of this study was the detailed characterization of solid-liquid interactions in oil adsorbed to Fujicalin and Neusilin which were manufactured by means of dual asymmetric centrifugation or conventional mortar/pestle blending. The adsorption strength of the excipients was investigated by Benchtop-NMR and ESR spectroscopy revealing the highest adsorption power for the Neusilin products. The adsorbate production methods as well as the storage of the excipients impact their adsorption properties. Environmental scanning electron microscopy (ESEM) and confocal laser scanning microscopy (CLSM) show that dual asymmetric centrifugation leads to a smoothing of the particle surface, whereas the mortar/pestle blending results in an uneven surface and particle destruction. The oil distribution at the particles is inhomogeneous for both production methods. The micropolarity of the adsorbed oil was investigated by ESR spectroscopy and multispectral fluorescence imaging. The adsorbing process on Neusilin leads to an increased micropolarity of the oil component. The release of the oil component in aqueous media could be verified by Benchtop-NMR and multispectral fluorescence imaging.

Liquisolid technique to enhance and to sustain griseofulvin dissolution: effect of choice of non-volatile liquid vehicles

Liquisolid systems were originally designed to enhance dissolution of hydrophobic drugs. Recently, the same technique was explored to control drug release via hydrophobic carriers. This work aimed to study the effects of different liquid vehicles on release characteristics of griseofulvin as a model hydrophobic drug. Fast dissolution tablets were prepared using three different non-ionic surfactants namely Cremophor(®)EL, Synperonic(®)PE/L61 and Capryol™ 90, on the contrary Kollicoat(®)SR 30D was used for production of grieseofulvin sustained release formulations. Avicel(®) PH102 and Cab-O-Sil(®) M5 were used as carrier and coat materials, respectively. The effect of formulation parameters, such as drug concentration and carrier to coat ratio, on enhancing drug dissolution was explored. Drug concentrations of 20% and 40% (w/w), and R-values (carrier to coat ratio) of 10 and 20 were used. The mathematical model was utilized to formulate liquisolid powder systems. All fast release liquisolid formulations showed higher percentage drug dissolution efficiency (%DE) than conventional directly compacted tablets. Cremophor(®)EL showed the best dissolution enhancement with %DE of about 90%, compared to only 23% for conventional tablets; DSC data suggested loss of griseofulvin crystallinity and thermal behavior. Kollicoat(®) SR 30D retarded the drug release even in the presence of hydrophilic carrier; DSC data suggested that only small fraction of the drug was present in the molecular state within the system. The used liquisolid vehicles showed promise to enhance and to control (depend on the choice of the liquid vehicle) the release of griseofulvin from liquisolid compacts.