Simultaneous analysis of skin penetration of surfactant and active drug from fluorosurfactant-based microemulsions

Sustained release gel (polymer-free) of itraconazole-loaded microemulsion for oral candidiasis treatment: time-kill kinetics and cellular uptake

Itraconazole (ICZ) was prepared in a self-microemulsifying (SM) gel. This gel was intended for use in the oral mucosa, where low volume and flow of saliva result in limited solubility and absorption of drugs that are poorly water-soluble. The drug-loaded gel formulation (ICZ-SM) was selected as a clear solution in the ternary phase diagram to improve the solubility of ICZ. Seven ratios (S1-S7) were prepared by mixing polyoxyl 35 castor oils (P35), a medium chain with a blend of mono-, di-, and triglycerides (MCT), and water. Phase separation of large-sized emulsions by countering with artificial saliva were observed in dilution tests for the formulation contained MCT, P35, and water at the ratios of 70:20:10 (S1), 10:80:10 (S3), and 20:60:20 (S4). Formulations in the ratios of 15:50:35 (S5) and 19:43:38 (S6) produced strong ICZ-SM gels, as shown by rheology tests, whereas the formulations at the ratios of 30:60:10 (S2) and 10:43:47 (S7) exhibited no elasticity. A model of zero-order kinetic (S5) and first-order kinetic (S6) were found to best fit the release kinetics of ICZ from the gels. Time-killing assays revealed that S5 and S6 required less time compared with S2 and the ICZ solution. Furthermore, S5 exhibited the highest increase in cell uptake compared with S2, S6, and the ICZ solution. These findings suggest that the ICZ-SM gel was a free polymer capable of delivering an ICZ for the treatment of oral candidiasis, and that ICZ-SM gels applied locally exhibit enhanced absorption into cells.

Quantitative two-photon microscopy imaging analysis of human skin to evaluate enhanced transdermal delivery by hybrid-type multi-lamellar nanostructure

Transdermal skin delivery is a method to transport various topical formulations to a deeper skin layer non-invasively. Permeability analysis of many delivering agents has been mostly conducted by a simple tape stripping method. However, it cannot reveal a detailed depth-dependent distribution profile of transdermally delivered agents in the skin. In this work, we achieved a cellular-level depth-defined visualization of fluorophore-labelled human epidermal growth factor (EGF) transdermally delivered to human skin by using encapsulation with common liposomes and newly fabricated multi-lamellar nanostructures using a custom-design two-photon microscopy system. It was able to generate 3D reconstructed images displaying the distribution of human EGF inside the human skin sample with high-resolution. Based on a depthwise fluorescence intensity profile showing the permeation of human EGF, a quantitative analysis was performed to assess the transdermal delivery efficacy achieved by each formulation, showing a significant improvement of the efficacy with the utilization of multi-lamellar nanostructure.

Topical Nano and Microemulsions for Skin Delivery

Nanosystems such as microemulsions (ME) and nanoemulsions (NE) offer considerable opportunities for targeted drug delivery to and via the skin. ME and NE are stable colloidal systems composed of oil and water, stabilised by a mixture of surfactants and cosurfactants, that have received particular interest as topical skin delivery systems. There is considerable scope to manipulate the formulation components and characteristics to achieve optimal bioavailability and minimal skin irritancy. This includes the incorporation of established chemical penetration enhancers to fluidize the stratum corneum lipid bilayers, thus reducing the primary skin barrier and increasing permeation. This review discusses nanosystems with utility in skin delivery and focuses on the composition and characterization of ME and NE for topical and transdermal delivery. The mechanism of skin delivery across the stratum corneum and via hair follicles is reviewed with particular focus on the influence of formulation.

Mechanisms of imiquimod skin penetration

Imiquimod (IMQ) ia an immunostimulating drug used for the treatment of neoplastic skin diseases, such as actinic keratosis (AK) and superficial basal cell carcinoma (sBCC), and as adjuvant for vaccination. Imiquimod formulation and skin delivery is highly challenging because of its very low solubility in most pharmaceutical excipients and poor penetration properties. Objectives of the work were: (1) to evaluate IMQ solubility in different solvents and pharmaceutical excipients; (2) to evaluate IMQ skin retention after the application of simple saturated solutions; (3) to evaluate the role of stratum corneum and solvent uptake on IMQ skin retention and (4) to formulate IMQ in microemulsions - prepared using previously investigated components - and compare them with the commercial formulation. The results show that IMQ solubility is not related to the solubility parameter of the solvents considered. The highest solubility was found with oleic acid (74mg/ml); in the case of PEGs, the solubility increased linearly with MW (PEG 200: 1.9mg/ml; PEG 400 7.3mg/ml, PEG 600 12.8mg/ml). Imiquimod skin retention from saturated solutions (Tween 80, oleic acid, propylene glycol, PEG 200, PEG 400, PEG 600, Transcutol, 2-pyrrolidone, DMSO) resulted relatively similar, being 1.6μg/cm(2) in case of oleic acid (solubility 74mg/ml) and 0.18μg/cm(2) in case of propylene glycol (solubility 0.60mg/ml). Permeation experiments on stripped skin (no stratum corneum) and isolated dermis as well as uptake experiments on isolated stratum corneum sheets demonstrated that IMQ accumulation is related to skin solvent uptake. Finally, microemulsions (MEs) prepared with the above-studied components demonstrated a very good performance. In particular, a ME composed of 10% oleic acid, 35% Transcutol, 35% Tween 80 and 20% water is able to accumulate the same amount of drug as the commercial formulation but with far more efficiency, since its concentration was 12 times lower.

Monocyclic monoterpenes as penetration enhancers of ligustrazine hydrochloride for dermal delivery

The purpose of this study was to explore the enhancing effects and the mechanism of monocyclic monoterpene penetration enhancers (menthol and menthone) on the transdermal absorption of ligustrazine hydrochloride (LH). Franz-type diffusion cells were used to determine percutaneous parameters of LH in vitro and surface changes of porcine skin were studied by a scanning electron microscope (SEM). The effects of promoters on the biophysical natures of stratum corneum (SC) were researched by Fourier transform-infrared (FT-IR). Penetration parameters of menthol (p < 0.01) and menthone groups (p < 0.05) were greater than those of the control; morphological changes of skin monitored by SEM demonstrated that the menthone group had the most disruption and desquamation of SC flakes, which resulted from extracted lipids. FT-IR measurements showed menthone had the greatest changes in peak shift and peak area, which resulted from C-H stretching vibrations of SC lipids. The results suggest that the penetration mechanism might include disturbing and extracting SC lipids and the hydrogen bond connection.

Novel Application of Natural Anisole Compounds as Enhancers for Transdermal Delivery of Ligustrazine

To improve the transdermal delivery of ligustrazine, Foeniculum vulgare food origin anisole compounds were employed as promoters. Transdermal fluxes of ligustrazine were determined by Franz-type diffusion cells. Fourier transform-infrared (FT-IR) spectra were used to detect the biophysical changes of the stratum corneum and to explore the mechanism of permeation enhancement. A scanning electron microscope (SEM) was used to monitor the morphological changes of the skin. Among the three anisoles, anisic acid increased the penetration flux of ligustrazine significantly. The ligustrazine flux with anisic acid (11.9 μg/cm(2)/h) was higher than that any other group (p < 0.05). Spectra observations revealed that these anisole enhancers were able to disturb and extract the stratum corneum lipids. In addition, apparent density was used to describe the desquamation extent of the scutella. Multiple mechanisms are involved in the permeation enhancement of ligustrazine, including disturbing and extracting stratum corneum lipid, forming a competitive hydrogen bond. All data suggested that anisole compounds could be a group of safe and active penetration enhancers for transdermal delivery of ligustrazine.

Colloidal nanocarriers for the enhanced cutaneous delivery of naftifine: characterization studies and in vitro and in vivo evaluations

In topical administration of antifungals, the drugs should pass the stratum corneum to reach lower layers of the skin in effective concentrations. Thus, the formulation of antifungal agents into a suitable delivery system is important for the topical treatment of fungal infections. Nanosized colloidal carriers have gained great interest during the recent years to serve as efficient promoters of drug penetration into the skin. Microemulsions are soft colloidal nanosized drug carriers, which are thermodynamically stable and isotropic systems. They have been extensively explored for the enhancement of skin delivery of drugs. This study was carried out to exploit the feasibility of colloidal carriers as to improve skin transport of naftifine, which is an allylamine antifungal drug. The microemulsions were formulated by construction of pseudoternary phase diagrams and composed of oleic acid (oil phase), Kolliphor^® EL or Kolliphor^® RH40 (surfactant), Transcutol^® (cosurfactant), and water (aqueous phase). The plain and drug-loaded microemulsions were characterized in terms of isotropy, particle size and size distribution, pH value, refractive index, viscosity, and conductivity. The in vitro skin uptake of naftifine from microemulsions was studied using tape stripping technique in pig skin. The drug penetrated significantly into stratum corneum from microemulsions compared to its marketed cream (P<0.05). Moreover, the microemulsion formulations led to highly significant amount of naftifine deposition in deeper layers of skin than that of commercial formulation (P<0.001). Microemulsion–skin interaction was confirmed by attenuated total reflectance – Fourier transformed infrared spectroscopy data, in vitro. The results of the in vivo tape stripping experiment showed similar trends as the in vitro skin penetration study. Topical application of the microemulsion on human forearms in vivo enhanced significantly the distribution and the amount of naftifine penetrated into the stratum corneum as compared to the marketed formulation (P<0.05). The relative safety of the microemulsion formulations was demonstrated with 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide viability test. This study indicated that the nanosized colloidal carriers developed could be considered as an effective and safe topical delivery system for naftifine.

Investigation of microemulsion microstructure and its impact on skin delivery of flufenamic acid

Microemulsions are well known penetration enhancing delivery systems. Several properties are described that influence the transdermal delivery of active components. Therefore, this study aimed to characterize fluorosurfactant-based microemulsions and to assess the impact of formulation variables on the transdermal delivery of incorporated flufenamic acid. The microemulsion systems prepared in this study consisted of bistilled water, oleic acid, isopropanol as co-solvent, flufenamic acid as active ingredient and either Hexafor(TM)670 (Hex) or Chemguard S-550-100 (Sin) as fluorosurfactant. Characterization was performed by a combination of techniques including electrical conductivity measurements, small-angle X-ray scattering (SAXS) and nuclear magnetic resonance (NMR) self-diffusion experiments. In vitro skin permeation experiments were performed with each prepared microemulsion using Franz type diffusion cells to correlate their present microstructure with their drug delivery to skin. Electrical conductivity increased with added water content. Consequently, the absence of a conductivity maximum as well as the NMR and SAXS data rather suggest O/W type microemulsions with spherical or rod-like microstructures. Skin permeation data revealed enhanced diffusion for Hex- and Sin-microemulsions if the shape of the structures was rather elongated than spherical implying that the shape of droplets had an essential impact on the skin permeation of flufenamic acid.

Human skin penetration of hyaluronic acid of different molecular weights as probed by Raman spectroscopy

BACKGROUND

Topical delivery of molecules into the human skin is one of the main issues in dermatology and cosmetology. Several techniques were developed to study molecules penetration into the human skin. Although widely accepted, the conventional methods such as Franz diffusion cells are unable to provide the accurate localization of actives in the skin layers. A different approach based on Raman spectroscopy has been proposed to follow-up the permeation of actives. It presents a high molecular specificity to distinguish exogenous molecules from skin constituents.

METHODS

Raman micro-imaging was applied to monitor the skin penetration of hyaluronic acids (HA) of different molecular weights. The first step, was the spectral characterization of these HA. After, we have determined spectral features of HA by which they can be detected in the skin. In the second part, transverse skin sections were realized and spectral images were recorded.

RESULTS

Our results show a difference of skin permeation of the three HA. Indeed, HA with low molecular weight (20-300 kDa) passes through the stratum corneum in contrast of the impermeability of high molecular weight HA (1000-1400 kDa).

CONCLUSION

Raman spectroscopy represents an analytical, non-destructive, and dynamic method to evaluate the permeation of actives in the skin layers.

Semi-solid fluorinated-DPPC liposomes: Morphological, rheological and thermic properties as well as examination of the influence of a model drug on their skin permeation

The goal of this study was to investigate the influence of an incorporated model drug on the skin permeation of the vehicle itself as it may affect the microstructure and properties of the applied formulation via molecular interactions. For this purpose, we performed skin permeation studies using liposomes prepared with F-DPPC, a monofluorinated analog of dipalmitoylphosphatidylcholine (DPPC), with and without sodium fluorescein (SoFl) serving as model drug. Interestingly, the liposome preparation with F-DPPC yielded semi-solid opalescent systems. Hence, a thorough characterization was accomplished beforehand by electron microscopy imaging, rheological and thermoanalytical experiments. Freeze-fracture electron microscopy images confirmed the existence of globular shaped vesicles in the F-DPPC preparations and oscillatory rheological measurements proved the viscoelastic properties of F-DPPC and F-DPPC+SoFl liposomes in contrast to the viscous characteristics of DPPC liposomes. Thermoanalytical measurements revealed an increased phase transition temperature Tm of about 50 °C for F-DPPC and F-DPPC+SoFl liposomes compared to pure DPPC liposomes with a Tm of about 43° C. The similar Tm of F-DPPC+SoFl and F-DPPC liposomes as well as the similar skin permeation of the vehicle compound F-DPPC compared to its drug-free counterpart suggest an incorporation of sodium fluorescein into the aqueous core of F-DPPC liposomes.