Injectable formulations for an intravitreal sustained-release application of a novel single-chain VEGF antibody fragment

Investigating bevacizumab and its fragments sustained release from intravitreal administrated PLGA Microspheres: A modeling approach

Intravitreal administrated bevacizumab has emerged as an effective antibody for suppressing VEGF expression in age-related macular degeneration (AMD) therapy. This study discusses certain issues related to the sustained release of bevacizumab from intravitreal poly(lactic-co-glycolic acid) (PLGA) microspheres. A computational model elucidating the ocular kinetics of bevacizumab is demonstrated, wherein the release of the drug from PLGA microspheres is modeled using the Koizumi approach, complemented by an empirical model that links the kinetics of bevacizumab release to a size-dependent hydrolytic degradation of the drug-loaded polymeric microparticles. The results of the simulation were then rigorously validated against experimental data. The as-developed model proved remarkably accurate in predicting the time-concentration profiles obtained following the intravitreal injection of PLGA microspheres of significantly different sizes. Notably, the time-concentration profiles of bevacizumab in distinct ocular tissues were almost unaffected by the size of the intravitreally administered PLGA microparticles. Furthermore, the model successfully predicted the retinal concentration of bevacizumab and its fragments (e.g., ranibizumab) administrated in the form of a solution. As such, this model for drug sustained release and ocular transport holds tremendous potential for facilitating the reliable evaluation of planned anti-VEGF therapies.

Preparation of high concentration protein powder suspensions by milling of lyophilizates

Pharmaceutical formulations utilizing protein drugs as powders can be used as drug delivery systems in various ways. Besides powders for inhalation, another promising approach is their use as suspensions in non-aqueous liquids for subcutaneous administration providing high protein stability and good injectability. In this study protein powder suspensions were prepared using a swing-mill. Milling of lyophilizates containing a model monoclonal antibody in presence of the suspension vehicle was compared to cryogenic dry milling. Wet media milling led to injectable suspensions, but resulted in monomer loss and increase in protein aggregation. When the lyophilizates were cryogenic dry ball milled less aggregation and monomer loss were detected. Differences related to protein integrity were found for different process parameters, which were successfully optimized. If not cooled with liquid nitrogen, dry milling resulted in increased damage to the mAb. The type of polyol stabilizer, as well as the protein to stabilizer ratio, did not affect the preservation of protein integrity. As finding the right milling duration is time and resource intensive, a correlation between lyophilizate cake hardness and milling duration was established. Based on this approach high concentration lyophilizates were successfully micronized. Suspensions of cryogenic milled powders lead to clogging of 25G needles, which could be prevented by an additional sieving step. Depending on the suspension vehicle, low viscosity formulations (<10 mPa·s) even at high concentrations (≥100 mg/ml protein concentration) were obtained featuring good injectability.

In Vivo Degradation Mechanism and Biocompatibility of a Biodegradable Aliphatic Polycarbonate: Poly(Trimethylene Carbonate-co-5-Hydroxy Trimethylene Carbonate)

A recently developed viscous liquid aliphatic polycarbonate, poly(trimethylene carbonate-co-5-hydroxy trimethylene carbonate), has advantageous properties for the delivery of acid-sensitive drugs such as proteins and peptides. This copolymer degrades in vitro via an alkaline-catalyzed intramolecular cyclization reaction yielding oligo (trimethylene carbonate), glycerol, and carbon dioxide, but its in vivo degradation mechanisms are presently unknown. The in vivo degradation mechanism and tissue response to this copolymer were investigated following subcutaneous implantation in Wistar rats. The molecular weight and composition of the copolymer varied in the same manner following subcutaneous implantation as observed in vitro. These findings suggest that the copolymer also degraded in vivo principally via intramolecular cyclization. The tissue response in terms of the inflammatory zone cell density, fibrous capsule thickness, and macrophage response was intermediate to that of two clinically used biodegradable sutures, Vicryl and Monocryl, indicating that the copolymer can be considered biotolerable. Collectively, the data show that further development of this copolymer as a drug delivery material is warranted.

Formulation parameters governing sustained protein delivery from degradable viscous liquid aliphatic polycarbonates

Viscous liquid degradable polymers have advantages as drug depots for sustained protein delivery. We have created a new aliphatic polycarbonate for this purpose, poly(trimethylene carbonate-co-5-hydroxy trimethylene carbonate), which upon degradation retains a near neutral micro-environmental pH. As such, this copolymer is highly suited to the delivery of acid sensitive proteins. We show that the mechanism of protein release from this liquid copolymer is consistent with the formation of super-hydrated regions as a result of the osmotic activity of the solution formed upon distributed protein particle dissolution. Protein release can be manipulated by controlling polymer hydrophobicity which can be adjusted by molecular weight and choice of initiator. Moreover, protein release is highly dependent on protein solubility which impacts the osmotic activity of the solution formed upon dissolution of the protein particles while protein molecular size and isoelectric point are not as influential. As demonstrated by the release of highly bioactive vascular endothelial growth factor, formulations of this copolymer are suitable for prolonged delivery of protein therapeutics.

Poly-Lactic Acid-Based Biopolymer Formulations Are Safe for Sustained Intratympanic Dexamethasone Delivery

HYPOTHESIS AND BACKGROUND

The clinical treatment of sudden sensorineural hearing loss currently relies on the administration of steroids, either systemically or via intratympanic injections. Intratympanic injections bypass the hemato-cochlear barrier, reducing its systemic side effects. The efficacy of the injections is limited through rapid drug clearance via the Eustachian tube, and through nonoptimal properties of slow-release drug carriers. A new slow-release drug delivery vehicle based on hexyl-substituted-poly-lactic-acid (HexPLA), with the highest possible safety profile and complete bio-degradability, has been evaluated for safety and efficacy in a standardized guinea pig model of intratympanic injection.

METHODS

A total of 83 animals received through retrobullar injection either empty Nile-red-colored HexPLA vehicle, 5%-dexamethasone-HexPLA, 5%-dexamethasone suspension, or a sham operation. Long-term residence time of vehicle, biocompatibility, click- and pure-tone hearing thresholds, and dexamethasone levels in the perilymph were prospectively assessed.

RESULTS

At 1 week after injection, HexPLA vehicle was morphologically present in the middle ear and perilymph levels in the 5%-dexamethasone-HexPLA were on average 2 to 3 μg/ml and one order of magnitude higher compared with those of the 5%-dexamethasone suspension group. No significant postoperative morphological or functional changes were observed up to 3 months postdelivery.

CONCLUSIONS

HexPLA is safe, fully biocompatible, and efficient for sustained high-dose, intratympanic delivery of dexamethasone at least for 1 week and therefore of high interest for the treatment of sudden sensorineural hearing loss and other acute inner ear diseases. Due to the favorable chemical properties, a wide range of other drugs can be loaded into the vehicle further increasing its potential value for otological applications.

Ocular Biodistribution of Spironolactone after a Single Intravitreal Injection of a Biodegradable Sustained-Release Polymer in Rats

Sustained-release formulations for ocular delivery are of increasing interest given their potential to significantly improve treatment efficacy and patient adherence. The objectives of this study were (i) to develop a sustained-release formulation of spironolactone (SPL) using a biodegradable and injectable polymer, hexyl-substituted poly-lactic acid (hexPLA) and (ii) to investigate the ocular biodistribution and tolerability of SPL and its metabolites in rats in vivo over 1 month following a single intravitreal injection (IVT inj). The concentrations of SPL and its two principal active metabolites, 7α-thiomethylspironolactone and canrenone (CAN), in the different ocular compartments were determined at different time points (3, 7, and 31 days after IVT inj) using a validated ultra-high-performance liquid chromatography-mass spectrometry method. Systemic exposure following a single IVT inj of 5% SPL-hexPLA formulation was evaluated by quantifying SPL and its metabolites in the plasma. Ocular tolerability of the formulation was evaluated using in vivo retinal imaging and histology. In vitro release studies revealed a sustained release of SPL from 5% SPL-hexPLA for up to 65 days. In vivo studies showed that SPL and its metabolites were detected in all ocular tissues at 3 and 7 days post-IVT inj. At 31 days post-IVT inj, SPL and CAN were mainly detected in the retina. These results also highlighted the clearance pathway of SPL and its metabolite involving the anterior and posterior routes in the first week (days 3 and 7), then mainly the posterior segment in the last week (day 31). This study showed that a single IVT inj of 5% SPL-hexPLA in rats enabled sustained delivery of therapeutic amounts of SPL for up to 1 month to the retina without systemic exposure. This formulation may be of interest for the local treatment of diseases involving overactivation of the mineralocorticoid receptor in the chorioretina such as chronic central serous chorioretinopathy.

Sustained-release of sclerostin single-chain antibody fragments using poly(lactic-co-glycolic acid) microspheres for osteoporotic fracture repair

Osteoporotic fracture is one of the most common bone diseases in middle and old age, as the most serious consequence of osteoporosis. Sclerostin single‐chain antibody fragments (SCL‐scFv) have been proven to promote bone formation by binding to scleroprotein, a natural antagonist of the Wnt pathway, but it is difficult to rule alone due to the weak permeability and immunogenicity. Herein, we prepared poly(lactic‐co‐glycolic acid) microspheres as a sustained‐release vehicle to prolong the activity of SCL‐scFv. The morphology of microspheres were uniform and nearly sphere, loading efficiency and encapsulation efficiency of SCL‐scFv microspheres were 6.28 ± 1.04% and 48.37 ± 8.11%, respectively. Approximately 90% of the SCL‐scFvs were released from the microspheres over 28 days with initial burst releasing (38%) in the first 4 days. Sustained‐release of active SCL‐scFv from microspheres promoted bone marrow mesenchymal stem cells osteogenic differentiation in vitro and enhanced fracture healing in ovariectomized rats by improving bone mass and bone formation in the fracture region. All these findings demonstrate that the microspheres are able to simultaneously achieve localized long‐term SCL‐scFv controlled release and effectively promote bone formation, which provides a promising approach for osteoporotic fracture.

In situ chemically crosslinked injectable hydrogels for the subcutaneous delivery of trastuzumab to treat breast cancer

Recently, novel approaches for the delivery of therapeutic antibodies have attracted much attention, especially sustained release formulations. However, sustained release formulations capable of carrying a high antibody load remain a challenge for practical use. In this study, a novel injectable hydrogel composed of maleimide-modified γ-polyglutamic acid (γ-PGA-MA) and thiol end-functionalized 4-arm poly(ethylene glycol) (4-arm PEG-SH) was developed for the subcutaneous delivery of trastuzumab. γ-PGA-MA and 4-arm PEG-SH formed a hydrogel through thiol-maleimide reactions, which had shear-thinning properties and reversible rheological behaviors. Moreover, a high content of trastuzumab (>100 mg/mL) could be loaded into this hydrogel, and trastuzumab demonstrated a sustained release over several weeks through electrostatic attraction. In addition, trastuzumab released from the hydrogel had adequate stability in terms of its structural integrity, binding bioactivity, and antiproliferative effect on BT-474 cells. Pharmacokinetic studies demonstrated that trastuzumab-loaded hydrogel (Her-hydrogel-10, composed of 1.5% γ-PGA-MA, 1.5% 4-arm PEG-SH, and 10 mg/mL trastuzumab) and trastuzumab/Zn-loaded hydrogel (Her/Zn-hydrogel-10, composed of 1.5% γ-PGA-MA, 1.5% 4-arm PEG-SH, 5 mM ZnCl₂, and 10 mg/mL trastuzumab) could lower the maximum plasma concentration (C_max) than the trastuzumab solution. Furthermore, Her/Zn-hydrogel-10 was better able to release trastuzumab in a controlled manner, which was ascribed to electrostatic attraction and formation of trastuzumab/Zn nanocomplexes. In a BT-474 xenograft tumor model, Her-hydrogel-10 had a similar tumor growth-inhibitory effect as that of the trastuzumab solution. By contrast, Her/Zn-hydrogel-10 exhibited a superior tumor growth-inhibitory capability due to the functionality of Zn. This study demonstrated that this hydrogel has potential as a carrier for the local and systemic delivery of proteins and antibodies. STATEMENT OF SIGNIFICANCE: Recently, novel sustained-release formulations of therapeutic antibodies have attracted much attention. However, these formulations should be able to carry a high antibody load owing to the required high dose, and these formulations remain a challenge for practical use. In this study, a novel injectable chemically cross-linked hydrogel was developed for the subcutaneous delivery of trastuzumab. This novel hydrogel possessed ideal characteristics of loading high content of trastuzumab (>100 mg/mL), sustained release of trastuzumab over several weeks, and maintaining adequate stability of trastuzumab. In vivo studies demonstrated that a trastuzumab-loaded hydrogel possessed the ability of controlled release of trastuzumab and maintained antitumor efficacy same as that of trastuzumab. These results implied that a γ-PGA-MA and 4-arm PEG-SH-based hydrogel has great potential in serving as a carrier for the local or systemic delivery of therapeutic proteins or antibodies.

Ocular Complications of Diabetes and Therapeutic Approaches

Diabetes mellitus (DM) is a metabolic disease defined by elevated blood glucose (BG). DM is a global epidemic and the prevalence is anticipated to continue to increase. The ocular complications of DM negatively impact the quality of life and carry an extremely high economic burden. While systemic control of BG can slow the ocular complications they cannot stop them, especially if clinical symptoms are already present. With the advances in biodegradable polymers, implantable ocular devices can slowly release medication to stop, and in some cases reverse, diabetic complications in the eye. In this review we discuss the ocular complications associated with DM, the treatments available with a focus on localized treatments, and what promising treatments are on the horizon.