Improving oral drug bioavailability with polycations?

Development, Characterization and In Vitro Gastrointestinal Release of PLGA Nanoparticles Loaded with Full-Spectrum Cannabis Extracts

Cannabinoids, such as ∆9-tetrahydrocannabinol (THC) and cannabidiol (CBD), are effective bioactive compounds that improve the quality of life of patients with certain chronic conditions. The copolymer poly(lactic-co-glycolic acid) (PLGA) has been used to encapsulate such compounds separately, providing pharmaceutical grade edible products with unique features. In this work, a variety of PLGA based nanoformulations that maintain the natural cannabinoid profile found in the plant (known as full-spectrum) are proposed and evaluated. Three different cannabis sources were used, representing the three most relevant cannabis chemotypes. PLGA nanocapsules loaded with different amounts of cannabinoids were prepared by nanoemulsion, and were then functionalized with three of the most common coating polymers: pectin, alginate and chitosan. In order to evaluate the suitability of the proposed formulations, all the synthesized nanocapsules were characterized, and their cannabinoid content, size, zeta-potential, morphology and in vitro bioaccessibility was determined. Regardless of the employed cannabis source, its load and the functionalization, high cannabinoid content PLGA nanocapsules with suitable particle size and zeta-potential were obtained. Study of nanocapsules' morphology and in vitro release assays in gastro-intestinal media suggested that high cannabis source load may compromise the structure of nanocapsules and their release properties, and hence, the use of lower content of cannabis source is recommended.

Progress and prospects of polysaccharide-based nanocarriers for oral delivery of proteins/peptides

The oral route has long been recognized as the most preferred route for drug delivery as it offers high patient compliance and requires minimal expertise. Unlike small molecule drugs, the harsh environment of the gastrointestinal tract and low permeability across the intestinal epithelium make oral delivery extremely ineffective for macromolecules. Accordingly, delivery systems that are rationally constructed with suitable materials to overcome barriers to oral delivery are exceptionally promising. Among the most ideal materials are polysaccharides. Depending on the interaction between polysaccharides and proteins, the thermodynamic loading and release of proteins in the aqueous phase can be realized. Specific polysaccharides (dextran, chitosan, alginate, cellulose, etc.) endow systems with functional properties, including muco-adhesiveness, pH-responsiveness, and prevention of enzymatic degradation. Furthermore, multiple groups in polysaccharides can be modified, which gives them a variety of properties and enables them to suit specific needs. This review provides an overview of different types of polysaccharide-based nanocarriers based on different kinds of interaction forces and the influencing factors in the construction of polysaccharide-based nanocarriers. Strategies of polysaccharide-based nanocarriers to improve the bioavailability of orally administered proteins/peptides were described. Additionally, current restrictions and future trends of polysaccharide-based nanocarriers for oral delivery of proteins/peptides were also covered.

Surface design of nanocarriers: Key to more efficient oral drug delivery systems

As nanocarriers (NCs) can improve the solubility of drugs, prevent their degradation by gastrointestinal (GI) enzymes and promote their transport across the mucus gel layer and absorption membrane, the oral bioavailability of these drugs can be substantially enhanced. All these properties of NCs including self-emulsifying drug delivery systems (SEDDS), solid lipid nanoparticles (SLNs), nanostructured lipid carriers (NLCs), liposomes, polymeric nanoparticles, inorganic nanoparticles and polymeric micelles depend mainly on their surface chemistry. In particular, interaction with food, digestive enzymes, bile salts and electrolytes, diffusion behaviour across the mucus gel layer and fate on the absorption membrane are determined by their surface. Bioinert surfaces limiting interactions with gastrointestinal fluid and content as well as with mucus, adhesive surfaces providing an intimate contact with the GI mucosa and absorption enhancing surfaces can be designed. Furthermore, charge converting surfaces shifting their zeta potential from negative to positive directly at the absorption membrane and surfaces providing a targeted drug release are advantageous. In addition to these passive surfaces, even active surfaces cleaving mucus glycoproteins on their way through the mucus gel layer can be created. Within this review, we provide an overview on these different surfaces and discuss their impact on the performance of NCs in the GI tract.

Physical methods for enhancing drug absorption from the gastrointestinal tract

Overcoming the gastrointestinal (GI) barriers is a formidable challenge in the oral delivery of active macromolecules such as peptide- and protein- based drugs. In the past four decades, a plethora of formulation strategies ranging from permeation enhancers, nanosized carriers, and chemical modifications of the drug's structure has been investigated to increase the oral absorption of these macromolecular compounds. However, only limited successes have been achieved so far, with the bioavailability of marketed oral peptide drugs remaining generally very low. Recently, a few approaches that are based on physical interactions, such as magnetic, acoustic, and mechanical forces, have been explored in order to control and improve the drug permeability across the GI mucosa. Although in the early stages, some of these methods have shown great potential both in terms of improved bioavailability and spatiotemporal delivery of drugs. Here, we offer a concise, yet critical overview of these rather unconventional technologies with a particular focus on their potential and possible challenges for further clinical translation.

Oral delivery of peptide therapeutics in infants: Challenges and opportunities

The vast majority of drugs are not designed or developed for pediatric and infant populations. Peptide drugs, which have become increasingly relevant in the past several decades, are no exception. Unfortunately, nearly all of the 60+ approved peptide drugs are formulated for injection, a particularly unfriendly mode of administration for infants. Although three peptide drugs were recently approved for oral formulations, this major advance in peptide drug delivery is available only for adults. In this review, we consider the current challenges and opportunities for the oral formulation of peptide therapeutics, specifically for infant populations. We describe the strategies that enable oral protein delivery and the potential impact of infant physiology on those strategies. We also detail the limited but encouraging progress towards 1) adapting conventional drug development and delivery approaches to infants and 2) designing novel infant-centric formulations. Together, these efforts underscore the feasibility of oral peptide delivery in infants and provide motivation to increase attention paid to this underserved area of drug delivery and formulation.

A new method to prepare microparticles based on an Aqueous Two-Phase system (ATPS), without organic solvents

HYPOTHESIS

Aqueous Two-Phase Systems (ATPS) are aqueous droplets dispersed in an aqueous phase. This specific behavior arises from interactions between at least two water-soluble entities, such as thermodynamically incompatible polymers. A simple, fast, and "green" process to produce ATPS with an aqueous core would be of high interest to the pharmaceutical field for drug delivery. However, to date, rapid destabilization of ATPS represents the main hurdle for their use. Herein we present a novel process to achieve a stabilized microparticle-ATPS, without the use of organic solvents.

EXPERIMENTS

ATPS composed of dextran and polyethylene oxide were prepared. A Pickering-like emulsion technique was used to stabilize the ATPS by adsorbing semi-solid particles (chitosan-grafted lipid nanocapsules) at the interface between the two aqueous phases. Finally, microparticles were formed by a polyelectrolyte complexation and gelation. The structure and stability of ATPS were characterized using microscopy and Turbiscan analysis.

FINDINGS

Adding chitosan-grafted lipid nanocapsules induced ATPS stabilization. Adding a polyelectrolyte such as sodium alginate allowed the formation of microparticles with a gelled shell that strengthened the formulation against shear stress and improved long-term stability, thus demonstrating that is possible to use ATPS to form delivery systems to encapsulate hydrophilic molecules.

Inhomogeneity of polylysine adsorption layers on lipid membranes revealed by theoretical analysis of electrokinetic data and molecular dynamics simulations

The adsorption of large polycations on a charged lipid membrane is qualitatively different from the small inorganic cations, which almost uniformly populate the membrane surface. We assume that the polycationic adsorption layer might be laterally inhomogeneous starting from a certain polymer length, and this effect can be more visible for membranes with low anionic lipid content. To study systems with inhomogeneous adsorption layers, we carried out electrokinetic measurements of mobility of liposomes containing anionic and neutral phospholipids in the presence of polylysine molecules. Some of these systems were simulated by all-atom molecular dynamics. Here we proposed a theoretical approach accounting for the formation of separated regions at the membrane surface, which differ in charge density and surface potential. Our model allowed us to determine the adsorption layer's geometric parameters such as surface coverage and surface-bound monomer fraction of polymer, which correlate with the molecular dynamics (MD) simulations. We demonstrated that the configuration polylysine adopts on the membrane surface (tall or planar) depends on the polymer/membrane charge ratio. Both theory and MD indicate a decrease in the anionic lipid content, alongside with a decrease in the bound monomer fraction and corresponding increase in the extension length of the adsorbed polymers.

Repurposing Heparin as Antimalarial: Evaluation of Multiple Modifications Toward In Vivo Application

Heparin is a promising antimalarial drug due to its activity in inhibiting Plasmodium invasion of red blood cells and to the lack of resistance evolution by the parasite against it, but its potent anticoagulant activity is preventing the advance of heparin along the clinical pipeline. We have determined, in in vitro Plasmodium falciparum cultures, the antimalarial activity of heparin-derived structures of different origins and sizes, to obtain formulations having a good balance of in vitro safety (neither cytotoxic nor hemolytic), low anticoagulant activity (≤23 IU/mL according to activated partial thromboplastin time assays), and not too low antimalarial activity (IC50 at least around 100 µg/mL). This led to the selection of five chemically modified heparins according to the parameters explored, i.e., chain length, sulfation degree and position, and glycol-split, and whose in vivo toxicity indicated their safety for mice up to an intravenous dose of 320 mg/kg. The in vivo antimalarial activity of the selected formulations was poor as a consequence of their short blood half-life. The covalent crosslinking of heparin onto the surface of polyethylene glycol-containing liposomes did not affect its antimalarial activity in vitro and provided higher initial plasma concentrations, although it did not increase mean circulation time. Finding a suitable nanocarrier to impart long blood residence times to the modified heparins described here will be the next step toward new heparin-based antimalarial strategies.

The Influence of Nanoparticle Properties on Oral Bioavailability of Drugs

Oral administration has been the most common therapeutic regimen in various diseases because of its high safety, convenience, lower costs, and high compliance of patients. However, susceptible in hostile gastrointestinal (GI) environment, many drugs show poor permeability across GI tract mucus and intestinal epithelium with poor oral absorption and limited therapeutic efficacy. In recent years, nanoparticulate drug delivery systems (NDDS) have become a hot research spot because of their unique advantages including protecting drug from premature degrading and interacting with the physiological environment, increasing intracellular penetration, and enhancing drug absorption. However, a slight change in physicochemistry of nanoparticles can significantly impact their interaction with biological pathways and alter the oral bioavailability of drugs. Hence, this review focuses on the factors affecting oral bioavailability from two aspects. On the one hand, the factors are the biochemical and physiological barriers in oral drugs delivery. On the other hand, the factors are the nanoparticle properties including size, surface properties, and shape of nanoparticles.

Development of Morin-Loaded Nanoemulsions Containing Various Polymers; Role of Polymers in Formulation Properties and Bioavailability

Emulsions for oral delivery are not suitable for sustained drug absorption because such preparations diffuse rapidly in the gastrointestinal (GI) tract after oral administration. In order to generate sustained drug absorption and increase oral bioavailability, various polymers were added to a morin (MO) nanoemulsion to improve retention in the GI tract and alter the surface properties of oil droplets in the nanoemulsion. The influence of these polymers on the formulation properties was investigated. The area under the blood concentration-time curve (AUC) and the mean residence time (MRT) after oral administration of the nanoemulsions were measured, and the influence of the polymers on bioavailability was investigated. Chitosan (Chi) addition MO nanoemulsion (MO-Chi nanoemulsion) showed the highest AUC and MRT. MO-Chi nanoemulsion increased retention in the GI tract because of the relatively higher viscosity and high affinity between mucin and Chi covering the oil droplets. Furthermore, MO-Chi nanoemulsion could maintain the drug in oil droplets by suppression of drug release through the polymer hydration layer, and sustained drug release achieved continuous drug absorption. Nanoemulsions with sodium carboxymethylcellulose and poly-γ-glutamic acid potassium salt showed the next highest AUC and MRT after MO-Chi nanoemulsion. From these results, it was suggested that by increasing the viscosity of the nanoemulsion, there was high affinity between the added polymer and mucin, and sustained drug release was useful for enhancing the bioavailability of the polymer-containing nanoemulsions.

Progress and Current Trends in the Synthesis of Novel Polymers with Enhanced Mucoadhesive Properties

Mucoadhesion is defined as the adherence of a synthetic or natural polymer to a mucosal membrane via physical or chemical interactions. Mucoadhesive materials are widely used to develop dosage forms for transmucosal drug delivery via ocular, nasal, esophageal, oral, vaginal, rectal, and intravesical routes of administration. This review will discuss some of the most prominent and recent synthetic methodologies employed to modify polymeric materials in order to enhance their mucoadhesive properties. This includes chemical conjugation of polymers with molecules bearing thiol-, catechol-, boronate-, acrylate-, methacrylate-, maleimide-, and N-hydroxy(sulfo)succinimide ester- groups.

Strategies to Enhance Drug Absorption via Nasal and Pulmonary Routes

New therapeutic agents such as proteins, peptides, and nucleic acid-based agents are being developed every year, making it vital to find a non-invasive route such as nasal or pulmonary for their administration. However, a major concern for some of these newly developed therapeutic agents is their poor absorption. Therefore, absorption enhancers have been investigated to address this major administration problem. This paper describes the basic concepts of transmucosal administration of drugs, and in particular the use of the pulmonary or nasal routes for administration of drugs with poor absorption. Strategies for the exploitation of absorption enhancers for the improvement of pulmonary or nasal administration are discussed, including use of surfactants, cyclodextrins, protease inhibitors, and tight junction modulators, as well as application of carriers such as liposomes and nanoparticles.

Engineering Strategies for Oral Therapeutic Enzymes to Enhance Their Stability and Activity

Oral application of therapeutic enzymes is a promising and non-invasive administration that improves patient compliance. However, the gastrointestinal tract poses several challenges to the oral delivery of proteins, including harsh pH conditions and digestive proteases. A promising way to stabilise enzymes during their gastrointestinal route is by modification with polymers that can provide both steric shielding and selective interaction in different digestive compartments. We give an overview of modification technologies for oral enzymes ranging from functionalisation of native proteins, to site-specific mutation and protein-polymer engineering. We specifically focus on enzymes that are active directly in the gastrointestinal lumen and not systemically absorbed. In addition, we discuss examples of microparticle and nanoparticle encapsulated enzymes for improved oral delivery. The modification of orally administered enzymes offers a broad chemical variability and may be a promising tool for enhancing their gastrointestinal stability.

Nanoparticle-Patterned Multicompartmental Chitosan Capsules for Oral Delivery of Oligonucleotides

Orally administered antisense therapy has been introduced as an effective approach for treating cancer in the gastrointestinal tract. However, its practical application has been limited by the instability of oligonucleotides and their inefficient delivery. To overcome these problems, we synthesized size-dependent, oligonucleotide nanoparticle-patterned chitosan/phytic acid (ODN/CS/PA) capsules with protective shields via a three-step process of self-assembly, nanoparticle encapsulation, and shell formation. The multicompartmental capsule size and oligonucleotide nanoparticle-loading pattern were controlled by applying different potentials during the electrostatic extrusion process used for nanoparticle encapsulation. Over 95% of encapsulated oligonucleotides were protected from nuclease digestion (DNase I) and, depending on their size, showed 40-75% protection against simulated gastric fluid. Their controlled release from capsules correlated with the cellular delivery of released nanoparticles and the inhibition of protein expression in cancer cells. Specifically, large capsules showed approximately 32-fold greater delivery to cancer cells than nonencapsulated nanoparticles. We also confirmed delivery of oligonucleotide nanoparticles to the small intestine and colon of rats following oral administration. These findings demonstrate that the multicompartmental ODN/CS/PA capsules can facilitate efficient oral delivery of oligonucleotides for cancer treatment.

The effect of thiamine-coating nanoparticles on their biodistribution and fate following oral administration

Thiamine-coated nanoparticles were prepared by two different preparative methods and evaluated to compare their mucus-penetrating properties and fate in vivo. The first method of preparation consisted of surface modification of freshly poly(anhydride) nanoparticles (NP) by simple incubation with thiamine (T-NPA). The second procedure focused on the preparation and characterization of a new polymeric conjugate between the poly(anhydride) backbone and thiamine prior the nanoparticle formation (T-NPB). The resulting nanoparticles displayed comparable sizes (about 200 nm) and slightly negative surface charges. For T-NPA, the amount of thiamine associated to the surface of the nanoparticles was 15 μg/mg. For in vivo studies, nanoparticles were labelled with either ^99mTc or Lumogen® Red. T-NPA and T-NPB moved faster from the stomach to the small intestine than naked nanoparticles. Two hours post-administration, for T-NPA and T-NPB, >30% of the given dose was found in close contact with the intestinal mucosa, compared with a 13.5% for NP. Interestingly, both types of thiamine-coated nanoparticles showed a greater ability to cross the mucus layer and interact with the surface of the intestinal epithelium than NP, which remained adhered in the mucus layer. Four hours post-administration, around 35% of T-NPA and T-NPB were localized in the ileum of animals. Overall, both preparative processes yielded thiamine decorated carriers with similar physico-chemical and biodistribution properties, increasing the versatility of these nanocarriers as oral delivery systems for a number of biologically active compounds.

Polyamidoamine Nanoparticles for the Oral Administration of Antimalarial Drugs

Current strategies for the mass administration of antimalarial drugs demand oral formulations to target the asexual Plasmodium stages in the peripheral bloodstream, whereas recommendations for future interventions stress the importance of also targeting the transmission stages of the parasite as it passes between humans and mosquitoes. Orally administered polyamidoamine (PAA) nanoparticles conjugated to chloroquine reached the blood circulation and cured Plasmodium yoelii-infected mice, slightly improving the activity of the free drug and inducing in the animals immunity against malaria. Liquid chromatography with tandem mass spectrometry analysis of affinity chromatography-purified PAA ligands suggested a high adhesiveness of PAAs to Plasmodium falciparum proteins, which might be the mechanism responsible for the preferential binding of PAAs to Plasmodium-infected erythrocytes vs. non-infected red blood cells. The weak antimalarial activity of some PAAs was found to operate through inhibition of parasite invasion, whereas the observed polymer intake by macrophages indicated a potential of PAAs for the treatment of certain coinfections such as Plasmodium and Leishmania. When fluorescein-labeled PAAs were fed to females of the malaria mosquito vectors Anopheles atroparvus and Anopheles gambiae, persistent fluorescence was observed in the midgut and in other insect's tissues. These results present PAAs as a versatile platform for the encapsulation of orally administered antimalarial drugs and for direct administration of antimalarials to mosquitoes, targeting mosquito stages of Plasmodium.

Strategies to overcome the polycation dilemma in drug delivery

Because of polycationic auxiliary agents such as chitosan, polyethyleneimine and cell penetrating peptides as well as cationic lipids assembling to polycationic systems, drug carriers can tightly interact with cell membranes exhibiting a high-density anionic charge. Because of these interactions the cell membrane is depolarized and becomes vulnerable to various uptake mechanisms. On their way to the target site, however, the polycationic character of all these drug carriers is eliminated by polyanionic macromolecules such as mucus glycoproteins, serum proteins, proteoglycans of the extracellular matrix (ECM) and polyanionic surface substructures of non-target cells such as red blood cells. Strategies to overcome this polycation dilemma are focusing on a pH-, redox- or enzyme-triggered charge conversion at the target site. The pH-triggered systems are making use of a slight acidic environment at the target site such as in case of solid tumors, inflammatory tissue and ischemic tissue. Due to a pH shift from 7.2 to slightly acidic mainly amino substructures of polymeric excipients are protonated or shielding groups such as 2,3 dimethylmaleic acid are cleaved off unleashing the underlying cationic character. Redox-triggered systems are utilizing disulfide linkages to bulky side chains such as PEGs masking the polycationic character. Under mild reducing conditions such as in the tumor microenvironment these disulfide bonds are cleaved. Enzyme-triggered systems are targeting enzymes such as alkaline phosphatase, matrix metalloproteinases or hyaluronidase in order to eliminate anionic moieties via enzymatic cleavage resulting in a charge conversion from negative to positive. Within this review an overview about the pros and cons of these systems is provided.

Materials and methods for delivery of biological drugs

Biological drugs generated via recombinant techniques are uniquely positioned due to their high potency and high selectivity of action. The major drawback of this class of therapeutics, however, is their poor stability upon oral administration and during subsequent circulation. As a result, biological drugs have very low bioavailability and short therapeutic half-lives. Fortunately, tools of chemistry and biotechnology have been developed into an elaborate arsenal, which can be applied to improve the pharmacokinetics of biological drugs. Depot-type release systems are available to achieve sustained release of drugs over time. Conjugation to synthetic or biological polymers affords long circulating formulations. Administration of biological drugs through non-parenteral routes shows excellent performance and the first products have reached the market. This Review presents the main accomplishments in this field and illustrates the materials and methods behind existing and upcoming successful formulations and delivery strategies for biological drugs.

Raloxifene/SBE-β-CD Inclusion Complexes Formulated into Nanoparticles with Chitosan to Overcome the Absorption Barrier for Bioavailability Enhancement

Raloxifene (RXF) is a hormone-like medication used for treating postmenopausal osteoporosis and estrogen-dependent breast cancer, yet associated with bad low bioavailability due to poor solubility. This study was intended to develop cyclodextrin/chitosan nanoparticles (ccNPs) for oral delivery of RXF in order to enhance the oral bioavailability. RXF-loaded ccNPs (RXF-ccNPs) were prepared by cyclodextrin inclusion followed by complexation with chitosan. RXF-ccNPs were fully characterized by particle size, morphology and in vitro drug release. The oral delivery efficacy and transepithelial transport potential were evaluated by pharmacokinetics, in situ single-pass intestinal perfusion, cellular uptake and ex vivo imaging. The resulting RXF-ccNPs were around 165 nm in particle size with a narrow distribution. The oral bioavailability of RXF was enhanced by 2.6 folds through ccNPs compared to RXF suspensions in rats. It was shown that RXF-ccNPs could improve the intestinal permeability of RXF, increase the cellular uptake of RXF and facilitate its transport across the absorptive epithelia. The results indicate that our developed ccNPs based on sulfobutylether-β-cyclodextrin and oligochitosan are a promising vehicle to orally deliver poorly water-soluble drugs over and above RXF.

Recent insights in the use of nanocarriers for the oral delivery of bioactive proteins and peptides

Bioactive proteins and peptides have been used with either prophylactic or therapeutic purposes, presenting inherent advantages as high specificity and biocompatibility. Nanocarriers play an important role in the stabilization of proteins and peptides, offering enhanced buccal permeation and protection while crossing the gastrointestinal tract. Moreover, preparation of nanoparticles as oral delivery systems for proteins/peptides may include tailored formulation along with functionalization aiming bioavailability enhancement of carried proteins or peptides. Oral delivery systems, namely buccal delivery systems, represent an interesting alternative route to parenteric delivery systems to carry proteins and peptides, resulting in higher comfort of administration and, therefore, compliance to treatment. This paper outlines an extensive overview of the existing publications on proteins/peptides oral nanocarriers delivery systems, with special focus on buccal route. Manufacturing aspects of most commonly used nanoparticles for oral delivery (e.g. polymeric nanoparticles using synthetic or natural polymers and lipid nanoparticles) advantages and limitations and potential applications of nanoparticles as proteins/peptides delivery systems will also be thoroughly addressed.

Oral administration of highly bright Cr3+ doped ZnGa2O4 nanocrystals for in vivo targeted imaging of orthotopic breast cancer

Near-infrared (NIR) long lasting persistent luminescence nanoparticles (PLNPs) have attracted considerable attention in the area of in vivo bioimaging, due to their background-free luminescence characteristics and deep tissue penetration. However, the low fluorescence quantum yield and short afterglow of the currently available PLNPs limit their applications. Here, water-soluble Cr³⁺-doped ZnGa₂O₄ PLNPs with the highest quantum yield (η = 20%) ever reported, bright NIR emission, and excellent colloidal stability were successfully prepared by a one-step hydrothermal method. The afterglow of the resultant nanocrystals lasted for more than 5 days and could be repeatedly reactivated by the light (λ = 657 nm) of a portable light emitting diode lamp after decay. These nanocrystals were functionalized with α,ω-dicarboxyl-terminated poly(ethylene glycol) and poly(acrylic acid) to improve their stability and biocompatibility, so that they could be conjugated with a c(RGDyK) peptide and labeled with ^99mTc for targeted imaging of orthotopic breast cancer by afterglow luminescence imaging and single-photon emission computed tomography imaging. Our NIR-PLNP probes can effectively avoid tissue auto-fluorescence and the light scattering caused by continuous excitation during the diagnosis of cancer.

Influence of different classes of crosslinkers on alginate polyelectrolyte nanoparticle formation, thermodynamics and characteristics

Complexation of linear alginate polyanions with different classes of crosslinkers (divalent cations, polycations, positively charged surfactants) was investigated, to unravel their effects on nanoparticle formation. The goal was to define the crosslinker-to-alginate molar ratios at which nanoparticles are formed, and to reveal the underlying thermodynamics and molecular interactions using dynamic and electrophoretic light scattering, isothermal titration calorimetry, and infrared spectroscopy. Alginate nanoparticles were formed across a limited range of molar ratios that was specific for each crosslinker, and had different size and stability. Thermodynamic parameters of alginate complexation with crosslinkers showed that nanoparticle formation was in all cases entropy driven, together with a minor enthalpic contribution. The crosslinking mechanism was based on ionic interactions, with accompanying weaker interactions specific for each crosslinker, and involved characteristic macroscopic association constants (K_a1) for complexation of alginate (range, 10⁴-10⁹M^-1). Additionally, the ionic strengths of the media influenced the characteristics and stabilities of the polyelectrolyte nanoparticles.

Nano-reservoir Bioadhesive Tablets Enhance Protein Drug Permeability Across the Small Intestine

Most therapeutic proteins are classified as class III drugs according to the Biopharmaceutical Classification System means that the low permeability across the intestinal epithelium is the rate-limited step for their oral absorption. Cationic chitosan nanoparticles have been found to open the tight junctions between epithelial cells. On the other hand, bioadhesive delivery devices could prolong the gastrointestinal residence time. In the present study, we developed a novel nano-reservoir bioadhesive tablets that combining the advantages of cationic nanoparticles and bioadhesive delivery devices anticipated achieving effective transport of sufficient protein drugs across the intestinal epithelium. The nano-reservoir in bioadhesive tablets was composed of chitosan nanoparticles (CS-NPs) loading a model protein drug bovine serum albumin (BSA). The formula of bioadhesive tablets was optimized by using rotatable central composite design and response surface methodology. The nano-reservoir, BSA-loaded CS-NPs, had an average particle diameter of 312.5 ± 12.89 nm and zeta-potential value of 26.76 ± 3.56 mV. Carboxymethyl chitosan added to the formula significantly ameliorated the tight junction damage of the Caco-2 cell monolayer induced by CS-NPs, meanwhile maintained the high transport efficiency of BSA. Permeability study exhibited that these nano-reservoir bioadhesive tablets combining the advantages of cationic nanoparticles and bioadhesive tablets significantly enhanced BSA transport through rabbit small intestine in comparison with either conventional bioadhesive tablets or CS-NPs. Therefore, these nano-reservoir bioadhesive tablets provided a great potential dosage form design for the oral delivery of protein drugs.

Oral Nanostructured Lipid Carriers Loaded with Near-Infrared Dye for Image-Guided Photothermal Therapy

Photothermal therapy exerts its anticancer effect by converting laser radiation energy into hyperthermia using a suitable photosensitizer. This study reports development of nanostructured lipid carriers (NLCs) suitable for noninvasive oral delivery of a near-infrared photosensitizer dye IR780. The carrier encapsulating the dye (IR780@NLCs) was stable in simulated gastric and intestinal conditions and showed greatly enhanced oral absorption of IR780 when compared with the free dye. As a result of increased oral bioavailability, enhanced accumulation of the dye in subcutaneous mouse colon tumors (CT-26 cells) was observed following oral gavage of IR780@NLCs. Photothermal antitumor activity of orally administered IR780@NLCs was evaluated following local laser irradiation of the CT-26 tumors. We observed significant effect of the photothermal IR780@NLCs treatment on the rate of the tumor growth and no toxicity associated with the oral administration of IR780@NLCs. Overall, orally administered IR780@NLCs represents a safe and noninvasive method to achieve systemic tumor delivery of a photosensitizing dye for applications in photothermal anticancer therapies.

Chitosan nanoparticles reduce LPS-induced inflammatory reaction via inhibition of NF-κB pathway in Caco-2 cells

Chitosan nanoparticles (CNP), an extensively oral-administered drug carrier, was investigated for the anti-inflammatory effects on LPS-inflamed Caco-2 cells and the relate mechanisms. CNP could alleviate the decrease of transepithelial electrical resistance (TEER) induced by LPS in Caco-2 monolayer, and significantly inhibit LPS-induced production of TNF-α, MIF, IL-8 and MCP-1 in a dose-dependent manner. PCR array assay revealed that CNP down-regulated the mRNA expression levels of TLR4 in LPS-inflamed Caco-2 cells. CNP was further showed to reduce cytoplasmic IκB-α degradation and nuclear NF-κB p65 levels in LPS-inflamed Caco-2 cells. These results suggested that CNP suppressed LPS-induced inflammatory response by decreasing permeability of intestinal epithelial monolayer and secretion of pro-inflammatory cytokine in Caco-2 cells, which were partially mediated by NF-κB signaling pathway.