Influence of the porosity of cushioning excipients on the compaction of coated multi-particulates

Native starch derived from different botanical sources as an effective co-cushioning agent in MUPS tablets

Compaction of sustained release coated pellets into multi-unit pellet system (MUPS) tablets has been associated with damage to the functional polymer layer, leading to a loss in desired sustained release function. Many filler materials and complex processes have been studied on their ability to mitigate compaction-induced pellet coat damage. Among these, native or unprocessed starches included in the filler material have not been explored well despite being a simple strategy. Sustained release pellets with ethylcellulose or acrylic coats were compacted into MUPS tablets with different filler materials, containing microcrystalline cellulose and native starch at 25 %, w/w or 40 %, w/w derived from rice, tapioca, corn, or potato. The MUPS tablet tensile strength and the extent of pellet coat damage were evaluated. Although starch weakened the tablets, rice and tapioca starch significantly mitigated pellet coat damage the most by 10 - 44 % (p < 0.008). Higher starch concentrations and higher compaction pressures led to a greater cushioning effect, which was indicated to result from reduced plastic deformation and increased particle rearrangement of the filler material. Pellets coated with acrylic benefitted more from starch and experienced less coat damage than pellets with ethylcellulose coats. This research demonstrates the use of native starches as a simple method to mitigate pellet coat damage in MUPS tablets.

Tableting of coated multiparticulates: Influences of punch face configurations

The influences of the punch face design on multi-unit pellet system (MUPS) tablets were investigated. Drug-loaded pellets coated with sustained release polymer based on ethylcellulose or acrylic were compacted into MUPS tablets. Punch face designs used include standard concave, deep concave, flat-faced bevel edge and flat-faced radius edge. MUPS tablets compacted at 2 or 8 kN were characterized for their tensile strength. The extent of pellet coat damage after tableting was evaluated from drug release profiles. Biconvex tablets were weaker by 0.01-0.15 MPa, depending on the pellet type used, and had 1-17 % higher elastic recovery (p < 0.000) than flat-faced tablets. At higher compaction force, the use of the deep concave punch showed a 13-26 % lower extent of pellet coat damage, indicated by a relatively higher mean dissolution time, compared to other punch face configurations (p < 0.000). This was attributed to increased rearrangement energy of the compacted material due to the high punch concavity, which sequestered compaction stress exerted on pellet coats. Although the deep concave punch reduced the stress, the resultant tablets containing pellets coated with acrylic were weaker (p = 0.01). Overall, the punch face configuration significantly affected the quality of MUPS tablets.

Microparticles and multi-unit systems for advanced drug delivery

Microparticles have unique benefits in the formulation of multiparticulate and multi-unit type pharmaceutical dosage forms allowing improved drug safety and efficacy with favorable pharmacokinetics and patient centricity. On the other hand, the above advantages are served by high and well reproducible quality attributes of the medicinal product where even flexible design and controlled processability offer success as well as possible longer product life-cycle for the manufacturers. Moreover, the specific demands of patients can be taken into account, including simplified dosing regimens, flexible dosage, drug combinations, palatability, and ease of swallowing. In the more than 70 years since the first modified-release formulation appeared on the market, many new formulations have been marketed and many publications have appeared in the literature. More unique and newer pharmaceutical technologies and excipients have become available for producing tailor-made particles with micrometer dimensions and beyond. All these have contributed to the fact that the sub-units (e.g. minitablets, pellets, microspheres) that make up a multiparticulate system can vary widely in composition and properties. Some units have mucoadhesive properties and others can float to contribute to a suitable release profile that can be designed for the multiparticulate formula as a whole. Nowadays, there are some available formulations on the market, which are able to release the active substance even for several months (3 or 6 months depending on the type of treatment). In this review, the latest developments in technologies that have been used for a long time are presented, as well as innovative solutions such as the applicability of 3D printing to produce subunits of multiparticulate systems. Furthermore, the diversity of multiparticulate systems, different routes of administration are also presented, touching the ones which are capable of carrying the active substance as well as the relevant, commercially available multiparticle-based medical devices. The versatility in size from 1 µm and multiplicity of formulation technologies promise a solid foundation for the future applications of dosage form design and development.

Cylindrical granules in the development of mesalazine solid formulations (Ⅱ): The contribution of high aspect ratio to favorable tabletability

Recently, cylindrical granules have been applied in pharmaceutical fields and their aspect ratio (AR) is considered an important factor in the manufacturing process. However, the relationships between AR and the tableting process were seldom reported. This study aims to clarify the role of AR in the tableting process of cylindrical granules. First, mesalazine cylindrical granules with different AR were extruded, and their physical attributes were then comprehensively characterized. Subsequently, their compression behaviors and tableting performances were systematically assessed. Notably, it was found that the cylindrical granules with high AR possessed good anti-deformation capacity and favorable tabletability. Finally, the dissolution test suggested that tablets compressed from cylindrical granules with higher AR showed lower dissolution rates. Collectively, findings in this study identified that the AR of cylindrical granules was a critical factor in the tableting process and provided valuable guidance for the application of these granules in oral solid formulations.

Cylindrical granules in the development of mesalazine solid formulations (Ⅰ): Physical properties, compression behaviors, and tableting performances

Cylindrical granules have been employed in the pharmaceutical industry. However, to our knowledge, the study on the compressibility and tabletability of cylindrical granules has not been reported. This study aimed to explore the effects of the physical properties of cylindrical granules on the compression behaviors and the tableting performances, with mesalazine (MSZ) as a model drug. First, the six formulations of MSZ cylindrical granules were extruded by changing the ethanol proportion in the binder. Then, the physical characteristics of MSZ cylindrical granules were systematically studied. Subsequently, the compressibility and tabletability were evaluated using different mathematic models. It was worth noting that highly porous cylindrical granules possessed favorable compressibility and good tabletability due to the increased pore volume, reduced density, and decreased fracture forces. Finally, dissolution tests were conducted and highly porous granules showed higher dissolution rates than the less porous ones, but an opposite trend was observed for the corresponding tablets. This study proved the importance of physical properties in the tableting process of cylindrical granules and provided strategies to improve their compressibility and tabletability.

Development of a simple in-die method for determination of capping tendency in rotary tableting machines

A rotary tableting machine is used for the continuous tableting process. Tableting conditions often result in capping, leading to serious problems during production. Several studies have been conducted to predict the tablet capping tendency. However, as most previous studies were conducted using a compaction simulator, there is a lack of technology that can be readily applied during actual production. Therefore, the present study aimed to develop a novel method for predicting tablet capping in a rotary tableting machine. We hypothesized that capping occurs when residual stress of the tablet inside a die exceeds the critical stress immediately before ejection. Residual stress was evaluated by measuring the in-line die-wall pressure in a rotary tableting machine. Additionally, critical stress was estimated from the tablet strength inside the die using the Rumpf's equation. The critical and residual stresses were compared to determine the capping tendency to some extent. The findings of this study will substantially contribute to the rapid detection of tablet capping during tablet production.

An approach for predicting the true density of powders based on in-die compression data

Helium pycnometry, a commonly used technique for measuring the true density of powders, is sensitive to the release of volatiles during measurement. This can lead to over-estimated true density, and as such, an accurate method for determining the true density of powders containing volatile components is needed. Here, a method based on in-die compression data obtained with a compaction simulator was assessed. Specifically, the stress transmission coefficient (STC), measured using an instrumented die, was used to predict the in-die Heckel mean yield pressure (Py). A true density was derived by repeatedly performing a Heckel analysis using iteratively estimated true density values until the predicted Py value from the measured STC value is obtained from in-die density - pressure data. This novel method was validated using a set of water-free powders. Using crystalline hydrates, we further showed that the calculated true densities were closer to values calculated from crystal structure than those from helium pycnometry. Hence, this method may be used for determining the true density of powders from their STC values.

MUPS Tableting-Comparison between Crospovidone and Microcrystalline Cellulose Core Pellets

Multi-unit pellet system (MUPS) tablets were fabricated by compacting drug-loaded pellets of either crospovidone or microcrystalline cellulose core. These pellets were produced by extrusion-spheronization and coated with ethylcellulose (EC) for a sustained drug release function. Coat damage due to the MUPS tableting process could undermine the sustained release function of the EC-coated pellets. Deformability of the pellet core is a factor that can impact the extent of pellet coat damage. Thus, this study was designed to evaluate the relative performance of drug-loaded pellets prepared with either microcrystalline cellulose (MCC) or crospovidone (XPVP) as a spheronization aid and were comparatively evaluated for their ability to withstand EC pellet coat damage when compacted. These pellets were tableted at various compaction pressures and pellet volume fractions. The extent of pellet coat damage was assessed by the change in drug release after compaction. The findings from this study demonstrated that pellets spheronized with XPVP had slightly less favorable physical properties and experienced comparatively more pellet coat damage than the pellets with MCC. However, MUPS tablets of reasonable quality could successfully be produced from pellets with XPVP, albeit their performance did not match that of vastly mechanically stronger pellets with MCC at higher compaction pressure.

Cushioning pellets based on microcrystalline cellulose - Crospovidone blends for MUPS tableting

Compaction of multiple-unit pellet system (MUPS) tablets has been extensively reported to be potentially challenging. Thus, there is a need for non-segregating cushioning agents to mitigate the deleterious effect of the compaction forces. This study was designed to investigate the use of porous pellets as cushioning agents using different drying techniques to prepare pellets of various porosities and of different formulations. The pellets fabricated were characterized for their porosity and crushing strength. Subsequently, MUPS tablets were prepared using blends of polymer-coated pellets and custom-designed cushioning pellets by compacting at different pressures. The effects of pellet volume fraction and dwell time on the pellet coat damage, as well as the tensile strength of the resultant MUPS tablets were also investigated. Compacts with coated pellet volume fraction of 0.21 exhibited the best cushioning effect when tableted at different compression speeds with both gravity and force feeders. The findings from this study showed that cushioning pellet porosity was highest when drying was carried out by freeze drying, followed by fluid bed drying and oven drying. There was an inverse relationship between cushioning pellet porosity and strength. The tensile strength of tablets prepared from freeze dried pellets was highest. The protective effect of the cushioning pellets was principally dependent on their porosity. Also, pellet volume fraction in the compacts and compaction pressure used had remarkable effect on pellet coat damage. When unprocessed powders were compacted by automatic die filling, capping and lamination problems were observed. However, tablets of reasonable quality were made with the cushioning pellets. Freeze dried pellets containing crospovidone were found to be promising as cushioning agents and had enabled the production of MUPS tablets even at higher compaction pressures, beyond the intrinsic crushing strength of the coated pellets.