Development and optimisation of simulated salivary fluid for biorelevant oral cavity dissolution

Novel Buccal Xanthan Gum-Hyaluronic Acid Eutectogels with Dual Anti-Inflammatory and Antimicrobial Properties

Buccal drug delivery systems often struggle with poor drug solubility, limited adhesion, and rapid clearance, leading to suboptimal therapeutic outcomes. To address these limitations, we developed a novel hybrid eutectogel composed of xanthan gum (XTG), hyaluronic acid (HA), and a Natural Deep Eutectic Solvent (NADES) system (choline chloride, sorbitol, and glycerol in 2:1:1 mole ratio), incorporating 2.5% ibuprofen (IBU) as a model drug. The formulation was optimized using a face-centered central composite design to enhance the rheological, textural, and drug release properties. The optimized eutectogels exhibited shear-thinning behavior (flow behavior index, n = 0.26 ± 0.01), high mucoadhesion (adhesiveness: 2.297 ± 0.142 N·s), and sustained drug release over 24 h, governed by Higuchi kinetics (release rate: 237.34 ± 13.61 μg/cm2/min1/2). The ex vivo residence time increased substantially with NADES incorporation, reaching up to 176.7 ± 23.1 min. An in vivo anti-inflammatory evaluation showed that the eutectogel reduced λ-carrageenan-induced paw edema within 1 h and that its efficacy was sustained in the kaolin model up to 24 h (p < 0.05), achieving comparable efficacy to a commercial 5% IBU gel, despite a lower drug concentration. Additionally, the eutectogel presented a minimum inhibitory concentration for Gram-positive bacteria of 25 mg/mL, and through direct contact, it reduced microbial viability by up to 100%. Its efficacy against Bacillus cereus, Enterococcus faecium, and Klebsiella pneumoniae, combined with its significant anti-inflammatory properties, positions the NADES-based eutectogel as a promising multifunctional platform for buccal drug delivery, particularly for inflammatory conditions complicated by bacterial infections.

Sublingual Fast-Dissolving Thin Films of Loratadine: Characterization, In Vitro and Ex Vivo Evaluation

Loratadine (LOR) is a second-generation antihistamine that exhibits a low and variable oral bioavailability (10-40%) and delayed onset owing to poor solubility and an extensive first-pass effect. Therefore, in light of the clinical need, the main goal of the present study was to develop sublingual fast-dissolving thin films of LOR-citric acid co-amorphous systems (LOR-CAs) with the aim of eliciting a faster onset and improving the bioavailability. We formulated sublingual fast-dissolving thin films of LOR by a film-casting technique using hydrophilic polymers like hydroxypropyl methylcellulose (HPMC E15), polyvinyl pyrrolidone K30 (PVP K30), and hydroxypropyl cellulose EL (HPC-EF) and citric acid as a pH modulator, while glycerin served as a plasticizer. The sublingual fast-dissolving thin films were characterized by FTIR, SEM, DSC, and XRD and evaluated for in vitro dissolution and ex vivo mucoadhesion. The best formulation (F1) developed using HPMC E15 as a polymer, glycerin as a plasticizer, and citric acid as a pH modulator was found to be the optimized formulation as it was smooth, clear, flexible, and displayed good mucoadhesion (11.27 ± 0.418 gm/cm2) and uniform thickness (0.25 ± 0.02 mm). The formulation F1 was found to display a significantly shorter DT (30.30 ± 0.6 s) and rapid release of LOR (92.10 ± 2.3% in 60 min) compared to other formulations (ANOVA, p < 0.001). The results indicated that the prepared sublingual films are likely to elicit a faster therapeutic effect, avoid first-pass metabolism, and improve the bioavailability.

Modification of the Biorelevant Release Testing of Esophageal Applied Mucoadhesive Films and Development of Formulation Strategies to Increase the Mucosal Contact Time

The increasing prevalence of esophageal disease highlights the clinical relevance of novel, long-lasting mucoadhesive oral dosage forms. The EsoCap device enables targeted local application of films in the esophagus. Biorelevant test systems such as EsoPeriDiss are essential for early formulation development. To this end, the developed and already described release model for simulating the esophagus is being further developed for its potential for biorelevant mapping of the application site through complete tempering and investigation of biorelevant release media. Particularly viscous saliva formulations led to an extension of the retention time. In addition, possible formulation strategies for increasing the retention time of esophageal applied films are being evaluated, such as different film thicknesses, polymer grades and the influence of different active ingredient properties on the retention time. For highly soluble active ingredients, the film thickness represents an option for extending the retention time, while for less soluble substances, the choice of polymer grade may be of particular interest.

Structure characterization of an agavin-type fructan isolated from Polygonatum cyrtonema and its effect on the modulation of the gut microbiota in vitro

The herbal medicine Polygonatum cyrtonema is highly regarded in China for its medicinal and dietary properties. However, further research is needed to elucidate the structure of its polysaccharide and understand how it promotes human health by modulating the gut microbiota. This study aims to investigate a homogeneous polysaccharide (PCP95-1-1) from Polygonatum cyrtonema and assess its susceptibility to digestion as well as its utilization by intestinal microbiota. The results confirmed that PCP95-1-1 is an agavin-type fructan, which possesses two fructose chains, namely β-(2 → 6) and β-(2 → 1) fructosyl-fructose, attached to the sucrose core, and has branches of β-D-Fruf residues. Moreover, PCP95-1-1 demonstrated resistance to digestion and maintained its reducing sugar content throughout the digestive system, indicating it could reach the gut without being digested. In vitro fermentation of PCP95-1-1 significantly decreased the pH value (p < 0.05) while notably increasing the production of short-chain fatty acids (SCFAs), confirming its utilization by human gut microbiota. Additionally, PCP95-1-1 exhibited a significant ability (p < 0.05) to beneficial bacteria such as Megamonas and Bifidobacterium, while reducing the presence of facultative or conditional pathogens such as Escherichia-Shigella and Klebsiella at the genus level. Consequently, PCP95-1-1 has the potential to positively influence physical well-being by modulating the gut microbiota environment and can be developed as a functional food.

A Guide to Best Practice in Sensory Analysis of Pharmaceutical Formulations

It is well established that treatment regime compliance is linked to the acceptability of a pharmaceutical formulation, and hence also to therapeutic outcomes. To that end, acceptability must be assessed during the development of all pharmaceutical products and especially for those intended for paediatric patients. Although acceptability is a multifaceted concept, poor sensory characteristics often contribute to poor patient acceptability. In particular, poor taste is often cited as a major reason for many patients, especially children, to refuse to take their medicine. It is thus important to understand and, as far as possible, optimise the sensory characteristics and, in particular, the taste/flavour/mouthfeel of the formulation throughout the development of the product. Sensory analysis has been widely practiced, providing objective data concerning the sensory aspects of food and cosmetic products. In this paper, we present proposals concerning how the well-established principles of sensory analysis can best be applied to pharmaceutical product development, allowing objective, scientifically valid, sensory data to be obtained safely. We briefly discuss methodologies that may be helpful in reducing the number of samples that may need to be assessed by human volunteers. However, it is only possible to be sure whether or not the sensory characteristics of a pharmaceutical product are non-aversive to potential users by undertaking sensory assessments in human volunteers. Testing is also required during formulation assessment and to ensure that the sensory characteristics remain acceptable throughout the product shelf life. We provide a risk assessment procedure to aid developers to define where studies are low risk, the results of a survey of European regulators on their views concerning such studies, and detailed guidance concerning the types of sensory studies that can be undertaken at each phase of product development, along with guidance about the practicalities of performing such sensory studies. We hope that this guidance will also lead to the development of internationally agreed standards between industry and regulators concerning how these aspects should be measured and assessed throughout the development process and when writing and evaluating regulatory submissions. Finally, we hope that the guidance herein will help formulators as they seek to develop better medicines for all patients and, in particular, paediatric patients.

Propolis as a Cariostatic Agent in Lozenges and Impact of Storage Conditions on the Stability of Propolis

Propolis is known as a source of compounds with strong antibacterial activity. Due to the antibacterial effect against streptococci of the oral cavity, it seems to be a useful agent in decreasing the accumulation of dental plaque. It is rich in polyphenols which are responsible for a beneficial impact on the oral microbiota and antibacterial effect. The aim of the study was to evaluate the antibacterial effect of Polish propolis against cariogenic bacteria. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were determined on cariogenic streptococci related to the occurrence of dental caries. Lozenges based on xylitol, glycerin, gelatin, water, and ethanol extract of propolis (EEP) were prepared. The effect of prepared lozenges on cariogenic bacteria was assessed. Propolis was compared to chlorhexidine which is used in dentistry as the gold standard. In addition, the prepared propolis formulation was stored under stress conditions to assess the influence of physical conditions (i.e., temperature, relative humidity, and UV radiation). In the experiment, thermal analyses were also performed to evaluate the compatibility of propolis with the substrate used to create the base of lozenges. The observed antibacterial effect of propolis and prepared lozenges with EEP may suggest directing subsequent research on prophylactic and therapeutic properties decreasing the accumulation of dental plaque. Therefore, it is worth highlighting that propolis may play an important role in the management of dental health and bring advantages in preventing periodontal diseases and caries as well as dental plaque. The colorimetric analyses carried out in the CIE L*a*b* system, microscopic examinations, and TGA/DTG/c-DTA measurements indicate the unfavorable effect of the tested storage conditions on the lozenges with propolis. This fact is particularly evident for lozenges stored under stress conditions, i.e., 40 °C/75% RH/14 days, and lozenges exposed to UVA radiation for 60 min. In addition, the obtained thermograms of the tested samples indicate the thermal compatibility of the ingredients used to create the formulation of lozenges.

Rational In Silico Design of Molecularly Imprinted Polymers: Current Challenges and Future Potential

The rational design of molecularly imprinted polymers has evolved along with state-of-the-art experimental imprinting strategies taking advantage of sophisticated computational tools. In silico methods enable the screening and simulation of innovative polymerization components and conditions superseding conventional formulations. The combined use of quantum mechanics, molecular mechanics, and molecular dynamics strategies allows for macromolecular modelling to study the systematic translation from the pre- to the post-polymerization stage. However, predictive design and high-performance computing to advance MIP development are neither fully explored nor practiced comprehensively on a routine basis to date. In this review, we focus on different steps along the molecular imprinting process and discuss appropriate computational methods that may assist in optimizing the associated experimental strategies. We discuss the potential, challenges, and limitations of computational approaches including ML/AI and present perspectives that may guide next-generation rational MIP design for accelerating the discovery of innovative molecularly templated materials.

Preparation and Evaluation of Amorphous Solid Dispersions for Enhancing Luteolin's Solubility in Simulated Saliva

Luteolin (LUT), a bioactive flavonoid, possesses various pharmacological properties, including antioxidant, antimicrobial, anti-allergic, cardio-protective, and anti-cancer activity. Among them, LUT's administration for the treatment of periodontal disease is very promising. However, its low water solubility magnifies the challenge of formulating LUT into an effective dosage form. In this vein, the aim of the present study examines the preparation of amorphous solid dispersions (ASD) for the solubility improvement of LUT in saliva. At first, the physicochemical properties of the active pharmaceutical ingredient (API) were studied before the selection of the most suitable ASD matrix/carrier. For this reason, six commonly used polymeric ASD matrix/carriers (namely, povidone, PVP; copovidone, coPVP; hydroxypropyl cellulose, HPC-SL; hydroxypropyl methyl cellulose acetate succinate, HPMC-AS; Eudragit^® RS, Eud-RS; and Soluplus^®, SOL) were screened via the film casting method, as to whether they could suspend the drug's recrystallization. The most promising matrix/carriers were then evaluated, based on their ability to inhibit LUT's precipitation after its solubilization, via the solvent shift method. Based on both screening methods, it was determined that PVP was the most promising matrix/carrier for the preparation of LUT's ASDs. Hence, in a further step, after the successful testing of components' miscibility, LUT-PVP ASDs were prepared via the solvent evaporation method. These systems (examined via powder X-ray diffractometry, pXRD) showed full API amorphization immediately after preparation and excellent physical stability (since they were stable after 3 months of storage). The study of LUT-PVP ASD's ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared) spectra demonstrated strong H-bonds between the molecules of the drug and the matrix/carrier, while molecular dynamics (MD) simulations were able to shed light on these drug-matrix/carrier interactions, at a molecular level. Finally, in vitro dissolution studies in simulated saliva proved that the prepared ASDs were able to significantly enhance LUT's dissolution profile. Hence, according to findings of the present work, the preparation of LUT-ASDs utilizing PVP as the polymeric matrix/carrier is regarded as a highly promising technique for the improvement of API's solubility in the oral cavity.

Design and optimization of silymarin loaded in lyophilized fast melt tablets to attenuate lung toxicity induced via HgCl2 in rats

The present study aimed to develop fast melting tablets (FMTs) using silymarin (SM) owing to FMTs rapid disintegration and dissolution. FMTs represent a pathway to help patients to increase their compliance level of treatment via facile administration without water or chewing beside reduction cost. One of the methods for FMTs formulation is lyophilization. Optimization of SM-FMTs was developed via a 32 factorial design. All prepared SM-FMTs were evaluated for weight variation, thickness, breaking force, friability, content uniformity, disintegration time (DT), and % SM released. The optimized FMT formula was selected based on the criteria of scoring the fastest DT and highest % SM released after 10 min (Q10). Optimized FMT was subjected to Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), and scanning electron microscopy (SEM) besides investigating its lung-protective efficacy. All SM-FMT tablets showed acceptable properties within the pharmacopeial standards. Optimized FMT (F7) scored a DT of 12.5 ± 0.64 Sec and % SM released at Q10 of 82.69 ± 2.88%. No incompatibilities were found between SM and excipients, it showed a porous structure under SEM. The optimized formula decreased cytokines, up-regulated miRNA133a, and down-regulated miRNA-155 and COX-2 involved in the protection against lung toxicity prompted by HgCl2 in a manner comparable to free SM at the same dosage.

Buccal films: A review of therapeutic opportunities, formulations & relevant evaluation approaches

The potential of the mucoadhesive film technology is hard to ignore, owing to perceived superior patient acceptability versus buccal tablets, and significant therapeutic opportunities compared to conventional oral drug delivery systems, especially for those who suffer from dysphagia. In spite of this, current translation from published literature into the commercial marketplace is virtually non-existent, with no authorised mucoadhesive buccal films available in the UK and very few available in the USA. This review seeks to provide an overview of the mucoadhesive buccal film technology and identify key areas upon which to focus scientific efforts to facilitate the wider adoption of this patient-centric dosage form. Several indications and opportunities for development were identified, while discussing the patient-related factors influencing the use of these dosage forms. In addition, an overview of the technologies behind the manufacturing of these films was provided, highlighting manufacturing methods like solvent casting, hot melt extrusion, inkjet printing and three-dimensional printing. Over thirty mucoadhesive polymers were identified as being used in film formulations, with details surrounding their mucoadhesive capabilities as well as their inclusion alongside other key formulation constituents provided. Lastly, the importance of physiologically relevant in vitro evaluation methodologies was emphasised, which seek to improve in vivo correlations, potentially leading to better translation of mucoadhesive buccal films from the literature into the commercial marketplace.

Mucin Transiently Sustains Coronavirus Infectivity through Heterogenous Changes in Phase Morphology of Evaporating Aerosol

Respiratory pathogens can be spread though the transmission of aerosolised expiratory secretions in the form of droplets or particulates. Understanding the fundamental aerosol parameters that govern how such pathogens survive whilst airborne is essential to understanding and developing methods of restricting their dissemination. Pathogen viability measurements made using Controlled Electrodynamic Levitation and Extraction of Bioaerosol onto Substrate (CELEBS) in tandem with a comparative kinetics electrodynamic balance (CKEDB) measurements allow for a direct comparison between viral viability and evaporation kinetics of the aerosol with a time resolution of seconds. Here, we report the airborne survival of mouse hepatitis virus (MHV) and determine a comparable loss of infectivity in the aerosol phase to our previous observations of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Through the addition of clinically relevant concentrations of mucin to the bioaerosol, there is a transient mitigation of the loss of viral infectivity at 40% RH. Increased concentrations of mucin promoted heterogenous phase change during aerosol evaporation, characterised as the formation of inclusions within the host droplet. This research demonstrates the role of mucus in the aerosol phase and its influence on short-term airborne viral stability.

Development of a Mucoadhesive Vehicle Based on Lyophilized Liposomes for Drug Delivery through the Sublingual Mucosa

A pharmaceutical vehicle based on lyophilized liposomes is proposed for the buccal administration of drugs aimed at systemic delivery through the sublingual mucosa. Liposomes made of egg phosphatidylcholine and cholesterol (7/3 molar ratio) were prepared and lyophilized in the presence of different additive mixtures with mucoadhesive and taste-masking properties. Palatability was assayed on healthy volunteers. The lyophilization cycle was optimized, and the lyophilized product was compressed to obtain round and capsule-shaped tables that were evaluated in healthy volunteers. Tablets were also assayed regarding weight and thickness uniformities, swelling index and liposome release. The results proved that lyophilized liposomes in unidirectional round tablets have palatability, small size, comfortability and buccal retention adequate for sublingual administration. In contact with water fluids, the tablets swelled, and rehydrated liposomes were released at a slower rate than permeation efficiency determined using a biomimetic membrane. Permeability efficiency values of 0.72 ± 0.34 µg/cm²/min and 4.18 ± 0.95 µg/cm²/min were obtained for the liposomes with and without additives, respectively. Altogether, the results point to the vehicle proposed as a liposomal formulation suitable for systemic drug delivery through the sublingual mucosa.