Exploring High Pressure Nebulization of Pluronic F127 Hydrogels for Intraperitoneal Drug Delivery

Sprayable self-assembly multifunctional bioactive poly(ferulic acid) hydrogel for rapid MRSA infected wound repair

The repair of methicillin-resistant staphylococcus aureus (MRSA) infected wounds remains a serious challenge. Development of multifunctional bioactive hydrogels has shown promising potential in treating MRSA wound. Ferulic acid has special bioactivities including antioxidant antiinflammation antibacterial capacities but limited in lack of engineering strategy for efficient treatment of MRSA infected wound. Herein, we developed a multifunctional bioactive poly(ferulic acid) copolymer (FPFA) for treating MRSA infected wound. FPFA could be self-assembled into hydrogel under body temperature and demonstrated the injectable, sprayable, self-healing, anti-inflammatory, antioxidant, and angiogenic activity. FPFA hydrogel also showed the good cytocompatibility, efficiently enhanced the endothelial cell migration, scavenged intracellular reactive oxygen species (ROS), inhibited the expression of inflammatory factors and enhanced the in vitro angiogenesis. The MRSA-infected wound model showed that FPFA could significantly inhibit the MRSA infection and excess inflammation, reinforce the angiogenesis, accelerate wound healing and skin tissue regeneration.

CO2-Driven Nebulization of pH-Sensitive Supramolecular Polymers for Intraperitoneal Hydrogel Formation and the Treatment of Peritoneal Metastasis

Because peritoneal metastasis (PM) from ovarian cancer is characterized by non-specific symptoms, it is often diagnosed at advanced stages. Pressurized intraperitoneal aerosol chemotherapy (PIPAC) can be considered a promising drug delivery method for unresectable PM. Currently, the efficacy of intraperitoneal (IP) drug delivery is limited by the off-label use of IV chemotherapeutic solutions, which are rapidly cleared from the IP cavity. Hence, this research aimed to improve PM treatment by evaluating a nanoparticle-loaded, pH-switchable supramolecular polymer hydrogel as a controlled release drug delivery system that can be IP nebulized. Moreover, a multidirectional nozzle was developed to allow nebulization of viscous materials such as hydrogels and to reach an even IP gel deposition. We demonstrated that acidification of the nebulized hydrogelator solution by carbon dioxide, used to inflate the IP cavity during laparoscopic surgery, stimulated the in situ gelation, which prolonged the IP hydrogel retention. In vitro experiments indicated that paclitaxel nanocrystals were gradually released from the hydrogel depot formed, which sustained the cytotoxicity of the formulation for 10 days. Finally, after aerosolization of this material in a xenograft model of PM, tumor progression could successfully be delayed, while the overall survival time was significantly increased compared to non-treated animals.

Smart hydrogels delivered by high pressure aerosolization can prevent peritoneal adhesions

Postoperative peritoneal adhesions occur in the majority of patients undergoing intra-abdominal surgery and are one of the leading causes of hospital re-admission. There is an unmet clinical need for effective anti-adhesive biomaterials, which can be applied evenly across the damaged tissues. We examined three different responsive hydrogel types, i.e. a thermosensitive PLGA-PEG-PLGA, a pH responsive UPy-PEG and a shear-thinning hexapeptide for this purpose. More specifically, their potential to be homogeneously distributed in the peritoneal cavity by high pressure nebulization and prevent peritoneal adhesions was evaluated. Solutions of each polymer type could be successfully nebulized while retaining their responsive gelation behavior in vitro and in vivo. Furthermore, none of the polymers caused in vitro toxicity on SKOV3-IP2 cells. Following intraperitoneal administration, both the PLGA-PEG-PLGA and the hexapeptide hydrogels resulted in local inflammation and fibrosis and failed in preventing peritoneal adhesions 7 days after adhesion induction. In contrast, the pH sensitive UPy-PEG formulation was well tolerated and could significantly reduce the formation of peritoneal adhesions, even outperforming the commercially available Hyalobarrier® as positive control. To conclude, local nebulization of the bioresponsive UPy-PEG hydrogel can be considered as a promising approach to prevent postsurgical peritoneal adhesions.

Functional biomaterials for the diagnosis and treatment of peritoneal surface malignancies

Peritoneal surface malignancies (PSM) can originate from tumors in many organs and are highly malignant, and difficult to diagnose and cure, posing a serious threat to the survival of patients. Although the diagnosis and treatment of PSM have made significant progress in the past two decades, numerous challenges remain. Recently, functionalized biomaterials have shown promise for PSM diagnosis and treatment. Hence, we review the progress of functionalized biomaterials for the diagnosis and treatment of PSM. We first introduce the classification and pathogenesis of PSM. We then discuss the applications of functionalized biomaterials for the diagnosis and treatment of PSM. In particular, we focus on functionalized biomaterials as drug carriers for the treatment of PSM, including chemotherapy, immunotherapy, targeted therapy, combination therapy, and other therapies. Finally, we summarized the current challenges and provided a perspective on the diagnosis and treatment of PSM.

Localized chemotherapy approaches and advanced drug delivery strategies: a step forward in the treatment of peritoneal carcinomatosis from ovarian cancer

Peritoneal carcinomatosis (PC) is a common outcome of epithelial ovarian carcinoma and is the leading cause of death for these patients. Tumor location, extent, peculiarities of the microenvironment, and the development of drug resistance are the main challenges that need to be addressed to improve therapeutic outcome. The development of new procedures such as HIPEC (Hyperthermic Intraperitoneal Chemotherapy) and PIPAC (Pressurized Intraperitoneal Aerosol Chemotherapy) have enabled locoregional delivery of chemotherapeutics, while the increasingly efficient design and development of advanced drug delivery micro and nanosystems are helping to promote tumor targeting and penetration and to reduce the side effects associated with systemic chemotherapy administration. The possibility of combining drug-loaded carriers with delivery via HIPEC and PIPAC represents a powerful tool to improve treatment efficacy, and this possibility has recently begun to be explored. This review will discuss the latest advances in the treatment of PC derived from ovarian cancer, with a focus on the potential of PIPAC and nanoparticles in terms of their application to develop new therapeutic strategies and future prospects.

Pluronic® triblock copolymer-based nanoformulations for cancer therapy: A 10-year overview

This paper provides a review of the literature on the use of Pluronic® triblock copolymers for drug encapsulation over the last 10 years. A special focus is given to the progress of drug delivery systems (e.g., micelles, liposomes, micro/nanoemulsions, hydrogels and nanogels, and polymersomes and niosomes); the beneficial aspects of Pluronic® triblock copolymers as biological response modifiers and as pharmaceutical additives, adjuvants, and stabilizers, are also discussed. The advantages and limitations encountered in developing site-specific targeting approaches based on Pluronic-based nanostructures in cancer treatment are highlighted, in addition to innovative examples for improving tumor cytotoxicity while reducing side effects.

Novel Osteogenic and Easily Handled Endodontic Calcium Silicate Cement Using Pluronic F127 Hydrogel

Calcium silicate cement (CSC) is widely used as an endodontic material in clinical applications such as direct pulp capping, pulpotomy, or root canal. CSC has good biocompatibility, sealing properties, and the ability to enhance hard tissue regeneration. However, the disadvantage of CSC is the difficulty in handling when placing it into endodontic tissue due to the long setting time. Several attempts have been made to improve handling of CSC; however, these methods were limited by osteogenic properties. To overcome such a disadvantage, this study investigated the use of Pluronic F127 (F127) for the development easy-to-handle novel endodontic CSCs with osteogenic properties. In this case, different concentrations of F127 (5%, 10%, 20%, 30%, and 40%) were implemented to generate CSC specimens H5, H10, H20, H30, and H40, respectively. Calcium ion was continuously released for 28 days. In addition, each group resulted in apatite formation for 28 days corresponding to calcium ion release. The concentration of F127 showed opposite relationships with water solubility and compressive strength. The H20 group showed a high level of osteogenic activity compared to other groups at 14 days. Mineralization of the H20 group was higher than that of the other groups. This study indicates that the novel F127-based hydrogel with CSC can potentially be used as endodontic filler.

Hemodynamical analysis of MHD two phase blood flow through a curved permeable artery having variable viscosity with heat and mass transfer

A numerical investigation of MHD blood flow through a stenosed permeable curved artery has been done in this study. Blood flow is considered in two-phases; core and plasma region, respectively. Viscosity of the core region is considered as temperature-dependent, while constant viscosity is considered in plasma region. The governing equations of the proposed two-phase blood flow model are considered in the toroidal coordinate system. The second-order finite difference method is adopted to solve governing equations with [Formula: see text] tolerance in the iteration process. A comparative study of Darcy number (Da) is performed to understand the influence of permeable and impermeable wall conditions. The effect of various physical parameters such as magnetic field (M), viscosity variation parameter ([Formula: see text]), Darcy number (Da), heat source (H) and chemical reaction parameter ([Formula: see text]) is displayed graphically on the flow velocity, temperature, concentration, wall shear stress and frictional resistance profiles. A comparison with published work has also been displayed through the graph to validate the present model, and it is in fair agreement with the existing work. The present study suggested that the curvature and permeability of the arterial wall raise the risk of atherosclerosis formation, while the implication of heat source on the blood flow lower this risk.