Quantitative analysis of emphysema in 3D using MDCT: influence of different reconstruction algorithms

Quantitative CT analysis of lung parenchyma to improve malignancy risk estimation in incidental pulmonary nodules

Objectives

To assess the value of quantitative computed tomography (QCT) of the whole lung and nodule-bearing lobe regarding pulmonary nodule malignancy risk estimation.

Methods

A total of 251 subjects (median [IQR] age, 65 (57–73) years; 37% females) with pulmonary nodules on non-enhanced thin-section CT were retrospectively included. Twenty percent of the nodules were malignant, the remainder benign either histologically or at least 1-year follow-up. CT scans were subjected to in-house software, computing parameters such as mean lung density (MLD) or peripheral emphysema index (pEI). QCT variable selection was performed using logistic regression; selected variables were integrated into the Mayo Clinic and the parsimonious Brock Model.

Results

Whole-lung analysis revealed differences between benign vs. malignant nodule groups in several parameters, e.g. the MLD (−766 vs. −790 HU) or the pEI (40.1 vs. 44.7 %). The proposed QCT model had an area-under-the-curve (AUC) of 0.69 (95%-CI, 0.62−0.76) based on all available data. After integrating MLD and pEI into the Mayo Clinic and Brock Model, the AUC of both clinical models improved (AUC, 0.91 to 0.93 and 0.88 to 0.91, respectively). The lobe-specific analysis revealed that the nodule-bearing lobes had less emphysema than the rest of the lung regarding benign (EI, 0.5 vs. 0.7 %; p < 0.001) and malignant nodules (EI, 1.2 vs. 1.7 %; p = 0.001).

Conclusions

Nodules in subjects with higher whole-lung metrics of emphysema and less fibrosis are more likely to be malignant; hereby the nodule-bearing lobes have less emphysema. QCT variables could improve the risk assessment of incidental pulmonary nodules.

Key Points

• Nodules in subjects with higher whole-lung metrics of emphysema and less fibrosis are more likely to be malignant.

• The nodule-bearing lobes have less emphysema compared to the rest of the lung.

• QCT variables could improve the risk assessment of incidental pulmonary nodules.

COVID-19 pneumonia: Prediction of patient outcome by CT-based quantitative lung parenchyma analysis combined with laboratory parameters

Objectives

To evaluate the prognostic value of fully automatic lung quantification based on spectral computed tomography (CT) and laboratory parameters for combined outcome prediction in COVID-19 pneumonia.

Methods

CT images of 53 hospitalized COVID-19 patients including virtual monochromatic reconstructions at 40-140keV were analyzed using a fully automated software system. Quantitative CT (QCT) parameters including mean and percentiles of lung density, fibrosis index (FIBI_-700, defined as the percentage of segmented lung voxels ≥-700 HU), quantification of ground-glass opacities and well-aerated lung areas were analyzed. QCT parameters were correlated to laboratory and patient outcome parameters (hospitalization, days on intensive care unit, invasive and non-invasive ventilation).

Results

Best correlations were found for laboratory parameters LDH (r = 0.54), CRP (r = 0.49), Procalcitonin (r = 0.37) and partial pressure of oxygen (r = 0.35) with the QCT parameter 75^th percentile of lung density. LDH, Procalcitonin, 75^th percentile of lung density and FIBI-₇₀₀ were the strongest independent predictors of patients’ outcome in terms of days of invasive ventilation. The combination of LDH and Procalcitonin with either 75^th percentile of lung density or FIBI_-700 achieved a r² of 0.84 and 1.0 as well as an area under the receiver operating characteristic curve (AUC) of 0.99 and 1.0 for the prediction of the need of invasive ventilation.

Conclusions

QCT parameters in combination with laboratory parameters could deliver a feasible prognostic tool for the prediction of invasive ventilation in patients with COVID-19 pneumonia.

Quantitative Evaluation of Chronic Obstructive Pulmonary Disease and Risk Prediction of Acute Exacerbation by High-Resolution Computed Tomography

Objective

It is imperative to popularize the tertiary prevention of chronic obstructive pulmonary disease (COPD) and to improve the diagnosis and treatment.

Methods

COPD patients were divided into mild (n = 18), moderate (n = 20), severe (n = 24), and extremely severe (n = 22) groups for performing high-resolution computed tomography (HRCT) and pulmonary function test. Serum procalcitonin (PCT) and high-sensitivity C-reactive protein (hs-CRP) were detected, and the occurrence rate of acute exacerbation COPD (AECOPD) was recorded during a 12-months follow-up period.

Results

With an increase in the severity grade, the HRCT indexes, including emphysema index (EI), 1st and 15th percentile of inspiratory attenuation distribution (Perc1 and Perc15), ratio of expiratory/inspiratory mean lung density (MLD_ex/in) and lung volume (LV_ex/in), and ratio of the wall thickness to the outer diameter of the lumen (TDR), as well as percentage of the wall area to the total cross-sectional area (WA%) were increased with a decreased change in relative lung volume with attenuation values between −860 and −950 HU (RVC_{−860to −950}) and lumen area (A_i). These were correlated with the ratio of forced expiratory volume in 1 sec (FEV1) over forced vital capacity (FVC) (FEV1/FVC), the percentage of FEV1 the predicted value (FEV1%), and ratio of residual volume to total lung volume (RV/TLC). Body mass index, MLD_ex/in, FEV1%, FEV1/FVC, and PCT had a predictive value to AECOPD, with the combined AUC of 0.812.

Conclusions

HRCT imaging effectively classifies the severity of COPD, which combined with BMI, PFT, and serum PCT can predict the risk of AECOPD.

Imaging of congenital lung diseases presenting in the adulthood: a pictorial review

Congenital lung diseases in adults are rare diseases that can present with symptoms or be detected incidentally. Familiarity with the imaging features of different types of congenital lung diseases helps both in correct diagnosis and management of these diseases. Congenital lung diseases in adults are classified into three main categories as bronchopulmonary anomalies, vascular anomalies, and combined bronchopulmonary and vascular anomalies. Contrast-enhanced computed tomography, especially 3D reconstructions, CT, or MR angiography, can show vascular anomalies in detail. The tracheobronchial tree, parenchymal changes, and possible complications can also be defined on chest CT, and new applications such as quantitative 3D reconstruction CT images, dual-energy CT (DECT) can be helpful in imaging parenchymal changes. In addition to the morphological assessment of the lungs, novel MRI techniques such as ultra-short echo time (UTE), arterial spin labeling (ASL), and phase-resolved functional lung (PREFUL) can provide functional information. This pictorial review aims to comprehensively define the radiological characteristics of each congenital lung disease in adults and to highlight differential diagnoses and possible complications of these diseases.

Quantitative inspiratory-expiratory chest CT to evaluate pulmonary involvement in pediatric hematopoietic stem-cell transplantation patients

Pulmonary complications following allogeneic hematopoietic stem-cell transplantation (HSCT) are a significant source of morbidity and complications may arise from a myriad of infectious and noninfectious sources. These complications may occur soon or many months post-transplantation and can have a broad range of outcomes. Surveillance for pulmonary involvement in the pediatric HSCT population can be challenging due to poor compliance with clinical pulmonary function testing, primarily spirometry, and there may be a role for clinical imaging to provide an additional means of monitoring, particularly in the era of clinical low-dose computed tomography (CT) protocols. In this single-site, retrospective study, a review of our institution's radiological and HSCT databases was conducted to assess the utility of a quantitative CT algorithm to describe ventilation abnormalities on high-resolution chest CT scans of pediatric HSCT patients. Thirteen non-contrast enhanced chest CT examinations acquired both in inspiration and expiration, from 12 deceased HSCT patients (median age at HSCT 10.4 years, median days of CT 162) were selected for the analysis. Also, seven age-matched healthy controls (median age 15.5) with non-contrast-enhanced inspiration-expiration chest CT were selected for comparison. We report that, compared to healthy age-matched controls, HSCT patients had larger percentages of poorly ventilated (median, 13.5% vs. 2.3%, p < .001) and air trapped (median 12.3% vs. 0%, p < .001) regions of lung tissue, suggesting its utility as a potential screening tool. Furthermore, there was wide variation within individual HSCT patients, supporting the use of multivolume CT and quantitative analysis to describe and phenotype post-transplantation lung involvement.

Correlation between quantitative multi-detector computed tomography lung analysis and pulmonary function tests in chronic obstructive pulmonary disease patients

Background

Chronic obstructive pulmonary disease [COPD] is a very common disease in developing as well as in developed countries. Using CT has a growing interest to give a phenotypic classification helping the clinical characterization of COPD patients. So, the aim of the present study was to evaluate whether there was a significant correlation between quantitative computed tomography lung analysis and pulmonary function tests in chronic obstructive pulmonary disease patients.

Results

The study included 50 male patients with a mean age of 62.82 years ± 8.65 years standard deviation [SD]. Significant correlation was found between the pulmonary function tests [FEV1 and FEV1/FVC ratio], and all parameters of quantitative assessment with – 950 HU [the percentage of low-attenuation areas (% LAA)]. Pulmonary function tests according to GOLD [Global Initiative for Chronic Obstructive Lung Disease] guidelines revealed that 4% had normal pulmonary function, 8% had mild obstructive defect, 32% had moderate obstructive defect, 26% had severe obstructive defect, and 30% had very severe obstructive defect.

Conclusion

Automated CT densitometry defining the emphysema severity was significantly correlated with the parameters of pulmonary function tests and providing an alternative, quick, simple, non-invasive study for evaluation of emphysema severity. Its main importance was the determination of the extent and distribution of affected emphysematous parts of the lungs especially for selecting the patients suitable for the lung volume reduction surgery.

Inter- and intra-software reproducibility of computed tomography lung density measurements

PURPOSE

Multiple commercial, open-source, and academic software tools exist for objective quantification of lung density in computed tomography (CT) images. The purpose of this study was to evaluate the intersoftware reproducibility of CT lung density measurements.

METHODS

Computed tomography images from 50 participants from the COPDGene^TM cohort study were randomly selected for analysis; n = 10 participants across each global initiative for chronic obstructive lung disease (GOLD) grade (GOLD 0-IV). Academic-based groups (n = 4) and commercial vendors (n = 4) participated anonymously to generate CT lung density measurements using their software tools. Computed tomography total lung volume (TLV), percentage of the low attenuation areas in the lung with Hounsfield unit (HU) values below -950HU (LAA₉₅₀ ), and the HU value corresponding to the 15th percentile on the parenchymal density histogram (Perc15) were included in the analysis. The intersoftware bias and reproducibility coefficient (RDC) was generated with and without quality assurance (QA) for manual correction of the lung segmentation; intrasoftware bias and RDC was also generated by repeated measurements on the same images.

RESULTS

Intersoftware mean bias was within ±0.22 mL, ±0.46%, and ±0.97 HU for TLV, LAA₉₅₀ and Perc15, respectively. The RDC was 0.35 L, 1.2% and 1.8 HU for TLV, LAA₉₅₀ and Perc15, respectively. Intersoftware RDC remained unchanged following QA: 0.35 L, 1.2% and 1.8 HU for TLV, LAA₉₅₀ and Perc15, respectively. All software investigated had an intrasoftware RDC of 0. The RDC was comparable for TLV, LAA₉₅₀ and Perc15 measurements, respectively, for academic-based groups/commercial vendor-based software tools: 0.39 L/0.32 L, 1.2%/1.2%, and 1.7 HU/1.6 HU. Multivariable regression analysis showed that academic-based software tools had greater within-subject standard deviation of TLV than commercial vendors, but no significant differences between academic and commercial groups were found for LAA₉₅₀ or Perc15 measurements.

CONCLUSIONS

Computed tomography total lung volume and lung density measurement bias and reproducibility was reported across eight different software tools. Bias was negligible across vendors, reproducibility was comparable for software tools generated by academic-based groups and commercial vendors, and segmentation QA had negligible impact on measurement variability between software tools. In summary, results from this study report the amount of additional measurement variability that should be accounted for when using different software tools to measure lung density longitudinally with well-standardized image acquisition protocols. However, intrasoftware reproducibility was deterministic for all cases so use of the same software tool to reduce variability for serial studies is highly recommended.

Computed Tomography Imaging for Novel Therapies of Chronic Obstructive Pulmonary Disease

Novel therapeutic options in chronic obstructive pulmonary disease (COPD) require delicate patient selection and thus demand for expert radiologists visually and quantitatively evaluating high-resolution computed tomography (CT) with additional functional acquisitions such as paired inspiratory-expiratory scans or dynamic airway CT. The differentiation between emphysema-dominant and airway-dominant COPD phenotypes by imaging has immediate clinical value for patient management. Assessment of emphysema severity, distribution patterns, and fissure integrity are essential for stratifying patients for different surgical and endoscopic lung volume reduction procedures. This is supported by quantitative software-based postprocessing of CT data sets, which delivers objective emphysema and airway remodelling metrics. However, the significant impact of scanning and reconstruction parameters, as well as intersoftware variability still hamper comparability between sites and studies. In earlier stage COPD imaging, it is less clear as to what extent quantitative CT might impact decision making and therapy follow-up, as emphysema progression is too slow to realistically be useful as a mid-term outcome measure in an individual, and longitudinal data on airway remodelling are still very limited.

Relationships between pulmonary function test parameters and quantitative computed tomography measurements of emphysema in subjects with chronic obstructive pulmonary disease

Objective.

CT is able to precisely define the pathological process in COPD. There are a number of previous articles discussing the distribution of emphysema and its connection with pulmonary function tests. However, the results obtained by the researchers are not identical.

Purpose.

To assess relationships between emphysema and pulmonary function test parameters in COPD patients.

Materials and methods.

Fifty-nine patients diagnosed to have COPD underwent chest CT examinations and pulmonary function tests.

For the quantitative assessment, percentages of low attenuation volume LAV _{950 HU} (%) of a both lungs, the right lung, the left lung, and each lobe were obtained. Quantitative CT measurements were compared with forced expiratory volume in 1 s (FEV₁), the ratio of FEV₁ to forced vital capacity (FEV₁/FVC), the diffusing capacity for carbon monoxide (DLco) and total lung capacity (TLC).

Results.

Except for the right middle lobe and the right upper lobe, respectively, all the quantitative CT measurements showed weak to moderate negative correlations with diffusing capacity (DLco) (r = –0.35 to –0.61, p < 0.05) and weak positive correlations with TLC (r = 0.34 to 0.44, p < 0.05). Group analysis indicated that LAV_{–950 HU} (%) values of both lungs, right lung, left lung, and each lobe, except for right middle lobe, were increased in patients with GOLD stages 3 and 4 of COPD compared to GOLD stages 1 and 2 (p < 0.05).

Conclusion.

CT measurements of emphysema are significantly related to pulmonary function tests results, particularly DLco.

Adaptive iterative dose reduction 3D (AIDR 3D) vs. filtered back projection: radiation dose reduction capabilities of wide volume and helical scanning techniques on area-detector CT in a chest phantom study

BACKGROUND

Computed tomography (CT) has important roles for lung cancer screening, and therefore radiation dose reduction by using iterative reconstruction technique and scanning methods receive widespread attention.

PURPOSE

To evaluate the effect of two reconstruction techniques (filtered back projection [FBP] and adaptive iterative dose reduction using three-dimensional processing [AIDR 3D]) and two acquisition techniques (wide-volume scan [WVS] and helical scan as 64-detector-row CT [64HS]) on the lung nodule identifications of using a chest phantom.

MATERIAL AND METHODS

A chest CT phantom including lung nodules was scanned using WVS and 64HS at nine different tube currents (TCs; range, 270-10 mA). All CT datasets were reconstructed with AIDR 3D and FBP. Standard deviation (SD) measurements by region of interest placement and qualitative nodule identifications were statistically compared. 64HS and WVS were evaluated separately, and FBP images acquired with 270 mA was defined as the standard reference.

RESULTS

SDs of all datasets with AIDR 3D showed no significant differences (P > 0.05) with standard reference. When comparing nodule identifications, area under the curve on WVS with AIDR 3D with TC <30 mA, on 64HS with AIDR 3D with TC <40 mA, and on reconstructions with FBP and each scan method with TC <60 mA was significantly lower than with standard reference (P < 0.05). With the same TC and reconstruction, SDs and nodule identifications of WVS were not significantly different from 64HS (P > 0.05).

CONCLUSION

In term of SD of lung parenchyma and nodule identification, AIDR 3D can achieve more radiation dose reduction than FBP and there is no significant different between WVS and 64HS.

Quantitative emphysema assessment of pulmonary function impairment by computed tomography in chronic obstructive pulmonary disease

OBJECTIVE

The objective of this study was to determine the capability of quantitative emphysema by computed tomography (CT) to assess pulmonary function impairment in a population of current smokers with and without airflow limitation.

METHODS

Seventy-six subjects (30 normal smokers; 8 with mild obstruction; 17 with moderate obstruction; 13 with severe obstruction; 8 with very severe obstruction) underwent CT examinations and pulmonary function tests. For the quantitative assessment, percentages of low attenuation volume (%LAVs) of whole lung, right lung, left lung, and each lobe were obtained. Computed tomography measurements were related to lung function (forced expiratory volume in 1 second [FEV1], ratio of FEV1 to forced vital capacity, diffusing capacity for carbon monoxide [DLCO], ratio of residual volume to total lung capacity [RV/TLC]) by multivariate linear regression analysis.

RESULTS

Quantitative CT measurements of emphysema were moderately, negatively correlated to airflow limitation (FEV1 and ratio of FEV1 to forced vital capacity) (r = -0.68 to -0.52, P < 0.001). Except for right middle and lower lobes, all the quantitative CT measurements showed moderate, negative correlations with diffusing capacity (DLCO) (r = -0.63 to -0.54, P ≤ 0.001) and weak to moderate correlations with RV (RV/TLC) (r = 0.36-0.41, P < 0.01). As compared with control samples, the %LAV of whole lung, right lung, left lung, and each lobe was increased in patients with GOLD stages 2, 3, and 4 disease (P < 0.05), and the % LAV of whole lung, right lung and right upper lobe was increased in patients with GOLD stage 1 (P < 0.05).

CONCLUSIONS

Pulmonary function results, particularly DLCO and RV/TLC, were primarily affected by the % LAV of the upper lobes. Quantitative CT measurements of emphysema provides a morphological method to investigate lung function impairment in patients with chronic obstructive pulmonary disease.

CT-Definable Subtypes of Chronic Obstructive Pulmonary Disease: A Statement of the Fleischner Society

The purpose of this statement is to describe and define the phenotypic abnormalities that can be identified on visual and quantitative evaluation of computed tomographic (CT) images in subjects with chronic obstructive pulmonary disease (COPD), with the goal of contributing to a personalized approach to the treatment of patients with COPD. Quantitative CT is useful for identifying and sequentially evaluating the extent of emphysematous lung destruction, changes in airway walls, and expiratory air trapping. However, visual assessment of CT scans remains important to describe patterns of altered lung structure in COPD. The classification system proposed and illustrated in this article provides a structured approach to visual and quantitative assessment of COPD. Emphysema is classified as centrilobular (subclassified as trace, mild, moderate, confluent, and advanced destructive emphysema), panlobular, and paraseptal (subclassified as mild or substantial). Additional important visual features include airway wall thickening, inflammatory small airways disease, tracheal abnormalities, interstitial lung abnormalities, pulmonary arterial enlargement, and bronchiectasis.

A new quantitative index of lobar air trapping in chronic obstructive pulmonary disease (COPD): comparison with conventional methods

PURPOSE

To determine the usefulness of newly-proposed index (attenuation-volume index, AVI: increase in mean value of lung attenuation (MVLA) divided by volume decrease ratio (VDR)) for quantitative assessment of lobar air trapping (LAT) using expiratory/inspiratory (E/I) computed tomography (CT) by minimizing influence of respiratory level.

MATERIALS AND METHODS

Institutional review board approved study protocol. Twenty-one moderate or severe COPD (group A), 16 mild COPD (group B) and 26 normal volunteers (group C) underwent both E/I scans via 320-row CT and pulmonary functional test (PFT). Volume image data were automatically segmented into six lung lobes with minimal manual intervention. AVI, pixel index (PI), air trapping ratio (ATR) and relative volume change (RVC860-950) were calculated in total lung (TL) and each lobe. Four indices in TL were correlated with both PFT result and VDR and those in TL and each lobe were compared between three groups.

RESULTS

Similar to ATR, AVI correlated with both FEV1/FVC (r=0.772, p<0.01) and RV/TLC (r=-0.726, p<0.01) and demonstrated a significant difference between three groups in both TL (group A: 1.69±0.45, group B: 2.21±0.45 and group C: 2.80±0.44) and five lobes except for left lingular segment. In a lobe-based analysis regarding relationship with VDR, AVI was much less dependent than ATR, although regression lines of groups A and C were separated for AVI as well as ATR. Coefficient of variation of either PI or RVC860-950 was significantly larger than that of AVI.

CONCLUSION

AVI can be a more suitable CT index for quantitative evaluation of LAT, minimizing influence of respiratory level.

Variation of densitometry on computed tomography in COPD--influence of different software tools

Objectives

Quantitative multidetector computed tomography (MDCT) as a potential biomarker is increasingly used for severity assessment of emphysema in chronic obstructive pulmonary disease (COPD). Aim of this study was to evaluate the user-independent measurement variability between five different fully-automatic densitometry software tools.

Material and Methods

MDCT and full-body plethysmography incl. forced expiratory volume in 1s and total lung capacity were available for 49 patients with advanced COPD (age = 64±9 years, forced expiratory volume in 1s = 31±6% predicted). Measurement variation regarding lung volume, emphysema volume, emphysema index, and mean lung density was evaluated for two scientific and three commercially available lung densitometry software tools designed to analyze MDCT from different scanner types.

Results

One scientific tool and one commercial tool failed to process most or all datasets, respectively, and were excluded. One scientific and another commercial tool analyzed 49, the remaining commercial tool 30 datasets. Lung volume, emphysema volume, emphysema index and mean lung density were significantly different amongst these three tools (p<0.001). Limits of agreement for lung volume were [−0.195, −0.052l], [−0.305, −0.131l], and [−0.123, −0.052l] with correlation coefficients of r = 1.00 each. Limits of agreement for emphysema index were [−6.2, 2.9%], [−27.0, 16.9%], and [−25.5, 18.8%], with r = 0.79 to 0.98. Correlation of lung volume with total lung capacity was good to excellent (r = 0.77 to 0.91, p<0.001), but segmented lung volume (6.7±1.3 – 6.8±1.3l) were significantly lower than total lung capacity (7.7±1.7l, p<0.001).

Conclusions

Technical incompatibilities hindered evaluation of two of five tools. The remaining three showed significant measurement variation for emphysema, hampering quantitative MDCT as a biomarker in COPD. Follow-up studies should currently use identical software, and standardization efforts should encompass software as well.

Iterative reconstruction technique vs filter back projection: utility for quantitative bronchial assessment on low-dose thin-section MDCT in patients with/without chronic obstructive pulmonary disease

OBJECTIVES

The aim of this study was to evaluate the utility of the iterative reconstruction (IR) technique for quantitative bronchial assessment during low-dose computed tomography (CT) as a substitute for standard-dose CT in patients with/without chronic obstructive pulmonary disease.

METHODS

Fifty patients (mean age, 69.2; mean % predicted FEV1, 79.4) underwent standard-dose CT (150mAs) and low-dose CT (25mAs). Except for tube current, the imaging parameters were identical for both protocols. Standard-dose CT was reconstructed using filtered back-projection (FBP), and low-dose CT was reconstructed using IR and FBP. For quantitative bronchial assessment, the wall area percentage (WA%) of the sub-segmental bronchi and the airway luminal volume percentage (LV%) from the main bronchus to the peripheral bronchi were acquired in each dataset. The correlation and agreement of WA% and LV% between standard-dose CT and both low-dose CTs were statistically evaluated.

RESULTS

WA% and LV% between standard-dose CT and both low-dose CTs were significant correlated (r > 0.77, p < 0.00001); however, only the LV% agreement between SD-CT and low-dose CT reconstructed with IR was moderate (concordance correlation coefficient = 0.93); the other agreement was poor (concordance correlation coefficient <0.90).

CONCLUSIONS

Quantitative bronchial assessment via low-dose CT has potential as a substitute for standard-dose CT by using IR and airway luminal volumetry techniques.

KEY POINTS

• Quantitative bronchial assessment of COPD using low-dose CT is possible. • Airway luminal volumetry with iterative reconstruction is insusceptible to dose reduction. • Filtered back-projection is susceptible to the effect of dose reduction. • Wall area percentage assessment is easily influenced by dose reduction.

Automatic pulmonary fissure detection and lobe segmentation in CT chest images

BACKGROUND

Multi-detector Computed Tomography has become an invaluable tool for the diagnosis of chronic respiratory diseases. Based on CT images, the automatic algorithm to detect the fissures and divide the lung into five lobes will help regionally quantify, amongst others, the lung density, texture, airway and, blood vessel structures, ventilation and perfusion.

METHODS

Sagittal adaptive fissure scanning based on the sparseness of the vessels and bronchi is employed to localize the potential fissure region. Following a Hessian matrix based line enhancement filter in the coronal slice, the shortest path is determined by means of Uniform Cost Search. Implicit surface fitting based on Radial Basis Functions is used to extract the fissure surface for lobe segmentation. By three implicit fissure surface functions, the lung is divided into five lobes. The proposed algorithm is tested by 14 datasets. The accuracy is evaluated by the mean (±S.D.), root mean square, and the maximum of the shortest Euclidian distance from the manually-defined fissure surface to that extracted by the algorithm.

RESULTS

Averaged over all datasets, the mean (±S.D.), root mean square, and the maximum of the shortest Euclidian distance are 2.05 ± 1.80, 2.46 and 7.34 mm for the right oblique fissure. The measures are 2.77 ± 2.12, 3.13 and 7.75 mm for the right horizontal fissure, 2.31 ± 1.76, 3.25 and 6.83 mm for the left oblique fissure. The fissure detection works for the data with a small lung nodule nearby the fissure and a small lung subpleural nodule. The volume and emphysema index of each lobe can be calculated. The algorithm is very fast, e.g., to finish the fissure detection and fissure extension for the dataset with 320 slices only takes around 50 seconds.

CONCLUSIONS

The sagittal adaptive fissure scanning can localize the potential fissure regions quickly. After the potential region is enhanced by a Hessian based line enhancement filter, Uniform Cost Search can extract the fissures successfully in 2D. Surface fitting is able to obtain three implicit surface functions for each dataset. The current algorithm shows good accuracy, robustness and speed, may help locate the lesions into each lobe and analyze them regionally.

Clinical utility of computed tomographic lung volumes in patients with chronic obstructive pulmonary disease

BACKGROUND

Published data concerning the utility of computed tomography (CT)-based lung volumes are limited to correlation with lung function.

OBJECTIVES

The aim of this study was to evaluate the clinical utility of the CT expiratory-to-inspiratory lung volume ratio (CT Vratio) by assessing the relationship with clinically relevant outcomes.

METHODS

A total of 75 stable chronic obstructive pulmonary disease (COPD) patients having pulmonary function testing and volumetric CT at full inspiration and expiration were retrospectively evaluated. Inspiratory and expiratory CT lung volumes were measured using in-house software. Correlation of the CT Vratio with patient-centered outcomes, including the modified Medical Research Council (MMRC) dyspnea score, the 6-min walk distance (6MWD), the St. George's Respiratory Questionnaire (SGRQ) score, and multidimensional COPD severity indices, such as the BMI, airflow obstruction, dyspnea, and exercise capacity index (BODE) and age, dyspnea, and airflow obstruction (ADO), were analyzed.

RESULTS

The CT Vratio correlated significantly with BMI (r = -0.528, p < 0.001). The CT Vratio was also significantly associated with MMRC dyspnea (r = 0.387, p = 0.001), 6MWD (r = -0.459, p < 0.001), and SGRQ (r = 0.369, p = 0.001) scores. Finally, the CT Vratio had significant correlations with the BODE and ADO multidimensional COPD severity indices (r = 0.605, p < 0.001; r = 0.411, p < 0.001).

CONCLUSION

The CT Vratio had significant correlations with patient-centered outcomes and multidimensional COPD severity indices.

Characteristic features of pulmonary function test, CT volume analysis and MR perfusion imaging in COPD patients with different HRCT phenotypes

INTRODUCTION

Computed tomography (CT) and magnetic resonance imaging (MRI) can provide detailed anatomic structures and quantitative function information for chronic obstructive pulmonary disease (COPD).

OBJECTIVES

To prospectively clarify characteristics of pulmonary function test (PFT), CT volume parameters and magnetic resonance (MR) perfusion imaging in COPD patients with different high-resolution computed tomography (HRCT) phenotypes.

METHODS

Sixty-two patients performed PFT, CT and MR perfusion imaging. COPD was classified into three phenotypes according to HRCT quantitative findings: A, E and M phenotype. Total lung volume (TLV), total emphysema volume (TEV) and emphysema index (EI) were quantitated by HRCT. In cases of perfusion defects (PDs), the shape and size were evaluated. The contrast between the normal lung and PDs was quantified by calculating their signal intensity ratio (RSI  = SIPD /SInormal ). The correlation was performed between PFT, CT and MR perfusion.

RESULTS

There were 42 A phenotype, 9 E phenotype and 11 M phenotype. There was significant difference in forced expiratory volume in 1 s (FEV1)/forced vital capacity (FVC) between A and M phenotype (P < 0.05). TEV and EI of A phenotype (0.4 ± 0.4 L and 8.0% ± 4.3%) were lower than those of E (1.0 ± 0.3 L and 18.6% ± 3.2%) or M phenotype (0.9 ± 0.2 L and 17.5% ± 1.7%). MR perfusion images showed circumscribed or diffuse patchy PDs. RSI of A phenotype was higher than that of E phenotype (20.3% ± 8.5% vs 11.8% ± 5.4%; P = 0.006). TEV and EI were moderate negatively correlated with diffusion function parameters. RSI was strongly correlated with FEV1% (A) and FEV1/FVC (M). FEV1/FVC was strongly correlated with TEV or EI (E).

CONCLUSION

There were different features and correlations between PFT, CT volume and MR perfusion in different phenotype, indicating each phenotype may have novel imaging method guiding clinical management.

Impact of Image Filters and Observations Parameters in CBCT for Identification of Mandibular Osteolytic Lesions

The aim of this study was to analyze the influence of filters (algorithms) to improve the image of Cone Beam Computed Tomography (CBCT) in diagnosis of osteolytic lesions of the mandible, in order to establish the protocols for viewing images more suitable for CBCT diagnostics. 15 dry mandibles in which perforations were performed, simulating lesions, were submitted to CBCT examination. Two examiners analyzed the images, using filters to improve image Hard, Normal, and Very Sharp, contained in the iCAT Vision software, and protocols for assessment: axial; sagittal and coronal; and axial, sagittal and coronal planes simultaneously (MPR), on two occasions. The sensitivity and specificity (validity) of the cone beam computed tomography (CBCT) have been demonstrated as the values achieved were above 75% for sensitivity and above 85% for specificity, reaching around 95.5% of sensitivity and 99% of specificity when we used the appropriate observation protocol. It was concluded that the use of filters (algorithms) to improve the CBCT image influences the diagnosis, due to the fact that all measured values were correspondingly higher when it was used the filter Very Sharp, which justifies its use for clinical activities, followed by Hard and Normal filters, in order of decreasing values.

Improved correlation between CT emphysema quantification and pulmonary function test by density correction of volumetric CT data based on air and aortic density

OBJECTIVES

To determine the improvement of emphysema quantification with density correction and to determine the optimal site to use for air density correction on volumetric computed tomography (CT).

METHODS

Seventy-eight CT scans of COPD patients (GOLD II-IV, smoking history 39.2±25.3 pack-years) were obtained from several single-vendor 16-MDCT scanners. After density measurement of aorta, tracheal- and external air, volumetric CT density correction was conducted (two reference values: air, -1,000 HU/blood, +50 HU). Using in-house software, emphysema index (EI) and mean lung density (MLD) were calculated. Differences in air densities, MLD and EI prior to and after density correction were evaluated (paired t-test). Correlation between those parameters and FEV1 and FEV1/FVC were compared (age- and sex adjusted partial correlation analysis).

RESULTS

Measured densities (HU) of tracheal- and external air differed significantly (-990 ± 14, -1016 ± 9, P<0.001). MLD and EI on original CT data, after density correction using tracheal- and external air also differed significantly (MLD: -874.9 ± 27.6 vs. -882.3 ± 24.9 vs. -860.5 ± 26.6; EI: 16.8 ± 13.4 vs. 21.1 ± 14.5 vs. 9.7 ± 10.5, respectively, P<0.001). The correlation coefficients between CT quantification indices and FEV1, and FEV1/FVC increased after density correction. The tracheal air correction showed better results than the external air correction.

CONCLUSION

Density correction of volumetric CT data can improve correlations of emphysema quantification and PFT.

The relationship between lung function impairment and quantitative computed tomography in chronic obstructive pulmonary disease

OBJECTIVES

To determine the relationship between lung function impairment and quantitative computed tomography (CT) measurements of air trapping and emphysema in a population of current and former heavy smokers with and without airflow limitation.

METHODS

In 248 subjects (50 normal smokers; 50 mild obstruction; 50 moderate obstruction; 50 severe obstruction; 48 very severe obstruction) CT emphysema and CT air trapping were quantified on paired inspiratory and end-expiratory CT examinations using several available quantification methods. CT measurements were related to lung function (FEV(1), FEV(1)/FVC, RV/TLC, Kco) by univariate and multivariate linear regression analysis.

RESULTS

Quantitative CT measurements of emphysema and air trapping were strongly correlated to airflow limitation (univariate r-squared up to 0.72, p < 0.001). In multivariate analysis, the combination of CT emphysema and CT air trapping explained 68-83% of the variability in airflow limitation in subjects covering the total range of airflow limitation (p < 0.001).

CONCLUSIONS

The combination of quantitative CT air trapping and emphysema measurements is strongly associated with lung function impairment in current and former heavy smokers with a wide range of airflow limitation.

Quantitative computed tomography in COPD: possibilities and limitations

Chronic obstructive pulmonary disease (COPD) is a heterogeneous disease that is characterized by chronic airflow limitation. Unraveling of this heterogeneity is challenging but important, because it might enable more accurate diagnosis and treatment. Because spirometry cannot distinguish between the different contributing pathways of airflow limitation, and visual scoring is time-consuming and prone to observer variability, other techniques are sought to start this phenotyping process. Quantitative computed tomography (CT) is a promising technique, because current CT technology is able to quantify emphysema, air trapping, and large airway wall dimensions. This review focuses on CT quantification techniques of COPD disease components and their current status and role in phenotyping COPD.

Robust, standardized quantification of pulmonary emphysema in low dose CT exams

RATIONALE AND OBJECTIVES

The aim of this study was to present and evaluate a fully automated system for emphysema quantification on low-dose computed tomographic images. The platform standardizes emphysema measurements against changes in the reconstruction algorithm and slice thickness.

MATERIALS AND METHODS

Emphysema was quantified in 149 patients using a fully automatic, in-house developed software (the Robust Automatic On-Line Pulmonary Helper). The accuracy of the system was evaluated against commercial software, and its reproducibility was assessed using pairs of volume-corrected images taken 1 year apart. Furthermore, to standardize quantifications, the effect of changing the reconstruction parameters was modeled using a nonlinear fit, and the inverse of the model function was then applied to the data. The association between quantifications and pulmonary function testing was also evaluated. The accuracy of the in-house software compared to that of commercial software was measured using Spearman's rank correlation coefficient, the mean difference, and the intrasubject variability. Agreement between the methods was studied using Bland-Altman plots. To assess the reproducibility of the method, intraclass correlation coefficients and Bland-Altman plots were used. The statistical significance of the differences between the standardized data and the reference data (soft-tissue reconstruction algorithm B40f; slice thickness, 1 mm) was assessed using a paired two-sample t test.

RESULTS

The accuracy of the method, measured as intrasubject variability, was 3.86 mL for pulmonary volume, 0.01% for emphysema index, and 0.39 Hounsfield units for mean lung density. Reproducibility, assessed using the intraclass correlation coefficient, was >0.95 for all measurements. The standardization method applied to compensate for variations in the reconstruction algorithm and slice thickness increased the intraclass correlation coefficients from 0.87 to 0.97 and from 0.99 to 1.00, respectively. The correlation of the standardized measurements with pulmonary function testing parameters was similar to that of the reference (for the emphysema index and the obstructive subgroup: forced expiratory volume in 1 second, -0.647% vs -0.615%; forced expiratory volume in 1 second/forced vital capacity, -0.672% vs -0.654%; and diffusing capacity for carbon monoxide adjusted for hemoglobin concentration, -0.438% vs -0.523%).

CONCLUSIONS

The new emphysema quantification method presented in this report is accurate and reproducible and, thanks to its standardization method, robust to changes in the reconstruction parameters.

Equating quantitative emphysema measurements on different CT image reconstructions

PURPOSE

To mathematically model the relationship between CT measurements of emphysema obtained from images reconstructed using different section thicknesses and kernels and to evaluate the accuracy of the models for converting measurements to those of a reference reconstruction.

METHODS

CT raw data from the lung cancer screening examinations of 138 heavy smokers were reconstructed at 15 different combinations of section thickness and kernel. An emphysema index was quantified as the percentage of the lung with attenuation below -950 HU (EI950). Linear, quadratic, and power functions were used to model the relationship between EI950 values obtained with a reference 1 mm, medium smooth kernel reconstruction and values from each of the other 14 reconstructions. Preferred models were selected using the corrected Akaike information criterion (AICc), coefficients of determination (R2), and residuals (conversion errors), and cross-validated by a jackknife approach using the leave-one-out method.

RESULTS

The preferred models were power functions, with model R2 values ranging from 0.949 to 0.998. The errors in converting EI950 measurements from other reconstructions to the 1 mm, medium smooth kernel reconstruction in leave-one-out testing were less than 3.0 index percentage points for all reconstructions, and less than 1.0 index percentage point for five reconstructions. Conversion errors were related in part to image noise, emphysema distribution, and attenuation histogram parameters. Conversion inaccuracy related to increased kernel sharpness tended to be reduced by increased section thickness.

CONCLUSIONS

Image reconstruction-related differences in quantitative emphysema measurements were successfully modeled using power functions.

Diffusion and perfusion MRI of the lung and mediastinum

With ongoing technical improvements such as multichannel MRI, systems with powerful gradients as well as the development of innovative pulse sequence techniques implementing parallel imaging, MRI has now entered the stage of a radiation-free alternative to computed tomography (CT) for chest imaging in clinical practice. Whereas in the past MRI of the lung was focused on morphological aspects, current MRI techniques also enable functional imaging of the lung allowing for a comprehensive assessment of lung disease in a single MRI exam. Perfusion imaging can be used for the visualization of regional pulmonary perfusion in patients with different lung diseases such as lung cancer, chronic obstructive lung disease, pulmonary embolism or for the prediction of postoperative lung function in lung cancer patients. Over the past years diffusion-weighted MR imaging (DW-MRI) of the thorax has become feasible with a significant reduction of the acquisition time, thus minimizing artifacts from respiratory and cardiac motion. In chest imaging, DW-MRI has been mainly suggested for the characterization of lung cancer, lymph nodes and pulmonary metastases. In this review article recent MR perfusion and diffusion techniques of the lung and mediastinum as well as their clinical applications are reviewed.

Reconstruction algorithms influence the follow-up variability in the longitudinal CT emphysema index measurements

OBJECTIVE

We wanted to compare the variability in the longitudinal emphysema index (EI) measurements that were computed with standard and high resolution (HR) reconstruction algorithms (RAs).

MATERIALS AND METHODS

We performed a retrospective review of 475 patients who underwent CT for surveillance of lung nodules. From this cohort, 50 patients (28 male) were included in the study. For these patients, the baseline and follow-up scans were acquired on the same multidetector CT scanner and using the same acquisition protocol. The CT scans were reconstructed with HR and standard RAs. We determined the difference in the EI between CT1 and CT2 for the HR and standard RAs, and we compared the variance of these differences.

RESULTS

The mean of the variation of the total lung volume was 0.14 L (standard deviation [SD] = 0.13 L) for the standard RA and 0.16 L (SD = 0.15 L) for the HR RA. These differences were not significant. For the standard RA, the mean variation was 0.13% (SD = 0.44%) for EI -970 and 0.4% (SD = 0.88%) for EI -950; for the HR RA, the mean variation was 1.9% (SD = 2.2%) for EI -970 and 3.6% (SD = 3.7%) for EI -950. These differences were significant.

CONCLUSION

Using an HR RA appears to increase the variability of the CT measurements of the EI.

[Radiation reduction and image quality improvement with iterative reconstruction at multidetector-row computed tomography]

The purpose of our study was to investigate the relationship between image quality and radiation dose for the filtered backprojection (FBP) with smooth kernel and the iterative reconstruction (iDose) based on image noise, image resolution, CT number, and low-contrast detectability. We used the Catphan phantom and scanned at 65, 45, 32, and 20 mAs on a 64-detector CT. Image reconstruction algorithm and kernel were employed FBP with standard (C type) and FBP with smooth (A type) kernel as images obtained at 20-65 mAs. Regarding to 20-45 mAs, we additionally reconstructed it using the iDose. After scanning, we measured image noise, full width at half maximum (FWHM), and CT number and assessed low-contrast detectability. Image noise acquired at iDose was 10.9, 11.1, and 11.2 HU corresponding to 45, 32, and 20 mAs, respectively. Compared to FBP with standard kernel, FBP with smooth kernel increased the image noise range from 6.7 HU at 65 mAs to 12.3 HU at 20 mAs with decreasing tube current-time product. Unlike iDose and FBP with standard kernel, there was a statistically significant difference between FBP with standard and smooth kernel with respect to image resolution (P=0.002). Reconstruction algorithm of the iDose resulted in the same or better image quality improvements despite a reduction in the radiation dose compared to the FBP with standard or with smooth kernel. From our findings, iDose facilitates the reduction in radiation dose while maintaining image quality.

Emphysema quantification in inflation-fixed lungs using low-dose computed tomography and 3He magnetic resonance imaging

OBJECTIVE

To evaluate the use of inflation-fixed lung tissue for emphysema quantification with computed tomography (CT) and He magnetic resonance (MR) diffusion imaging.

METHODS

Fourteen subjects representing a range of chronic obstructive pulmonary disease severity who underwent complete or lobar lung resection were studied. Computed tomographic measurements of lung attenuation and MR measurements of the hyperpolarized 3He apparent diffusion coefficient (ADC) in resected specimens fixed in inflation with heated formalin vapor were compared with measurements obtained before fixation.

RESULTS

The mean (SD) CT emphysema indices were 56% (17%) before and 58% (19%) after fixation (P = 0.77; R = 0.76). Index differences correlated with differences in lung volume (R = 0.47). The mean (SD) 3He ADCs were 0.40 (0.15) cm/s before and 0.39 (0.14) cm/s after fixation (P = 0.03, R = 0.98). The CT emphysema index and the 3He ADC were correlated before (R = 0.89) and after fixation (R = 0.79).

CONCLUSIONS

Concordance of CT and 3He MR imaging measurements in unfixed and inflation-fixed lungs supports the use of inflation-fixed lungs for quantitative imaging studies in emphysema.

Acurácia da mensuração do enfisema pulmonar na tomografia computadorizada: pontos importantes

Para garantir a confiabilidade dos dados de quantificação computadorizada do enfisema pulmonar (densitovolumetria pulmonar) na tomografia computadorizada, alguns aspectos técnicos devem ser considerados. A alteração das densidades na tomografia computadorizada com as mudanças no nível de inspiração e expiração do pulmão, com a espessura de corte da tomografia computadorizada, com o algoritmo de reconstrução e com o tipo de tomógrafo dificulta as comparações tomográficas nos estudos de acompanhamento do enfisema pulmonar. No entanto, a densitovolumetria pulmonar substituiu a avaliação visual e compete com as provas de função pulmonar como método para medir o enfisema pulmonar. Esta revisão discute as variáveis técnicas que alteram a aferição do enfisema na tomografia computadorizada e sua influência nas medições de enfisema.

Collapsibility of lung volume by paired inspiratory and expiratory CT scans: correlations with lung function and mean lung density

RATIONALE AND OBJECTIVES

To evaluate the relationship between measurements of lung volume (LV) on inspiratory/expiratory computed tomography (CT) scans, pulmonary function tests (PFT), and CT measurements of emphysema in individuals with chronic obstructive pulmonary disease.

MATERIALS AND METHODS

Forty-six smokers (20 females and 26 males; age range 46-81 years), enrolled in the Lung Tissue Research Consortium, underwent PFT and chest CT at full inspiration and expiration. Inspiratory and expiratory LV values were automatically measured by open-source software, and the expiratory/inspiratory (E/I) ratio of LV was calculated. Mean lung density (MLD) and low attenuation area percent (<-950 HU) were also measured. Correlations of LV measurements with lung function and other CT indices were evaluated by the Spearman rank correlation test.

RESULTS

LV E/I ratio significantly correlated with the following: the percentage of predicted value of forced expiratory volume in the first second (FEV(1)), the ratio of FEV(1) to forced vital capacity (FVC), and the ratio of residual volume (RV) to total lung capacity (TLC) (FEV(1)%P, R = -0.56, P < .0001; FEV(1)/FVC, r = -0.59, P < .0001; RV/TLC, r = 0.57, P < .0001, respectively). A higher correlation coefficient was observed between expiratory LV and expiratory MLD (r = -0.73, P < .0001) than between inspiratory LV and inspiratory MLD (r = -0.46, P < .01). LV E/I ratio showed a very strong correlation to MLD E/I ratio (r = 0.95, P < .0001).

CONCLUSIONS

LV E/I ratio can be considered to be equivalent to MLD E/I ratio and to reflect airflow limitation and air-trapping. Higher collapsibility of lung volume, observed by inspiratory/expiratory CT, indicates less severe conditions in chronic obstructive pulmonary disease.

Fully automatic quantitative assessment of emphysema in computed tomography: comparison with pulmonary function testing and normal values

Characterisation and quantification of emphysema are necessary for planning of local treatment and monitoring. Sensitive, easy to measure, and stable parameters have to be established and their relation to the well-known pulmonary function testing (PFT) has to be investigated. A retrospective analysis of 221 nonenhanced thin-section MDCT with a corresponding PFT was carried out, with a subgroup analysis in 102 COPD stage III+IV, 44 COPD stage 0, and 33 investigations into interstitial lung disease (ILD). The in-house YACTA software was used for automatic quantification of lung and emphysema volume [l], emphysema index, mean lung density (MLD [HU]) and 15(th) percentile [HU]. CT-derived lung volume is significantly smaller in ILD (3.8) and larger in COPD (7.2) than in controls (5.9, p < 0.0001). Emphysema volume and index are significantly higher in COPD than in controls (3.2 vs. 0.5, p < 0.0001, 45% vs. 8%, p < 0.0001). MLD and 15(th) percentile are significantly smaller in COPD (-877/-985, p < 0.0001) and significantly higher in ILD (-777, p < 0.0006/-914, p < 0.0001) than in controls (-829/-935). A relevant amount of COPD patients apparently do not suffer from emphysema, while controls who do not fulfil PFT criteria for COPD also demonstrate CT features of emphysema. Automatic quantification of thin-section CT delivers convincing parameters and ranges that are able to differentiate among emphysema, control and ILD. An emphysema index of lower 20%, MLD higher than -850, and 15(th) percentile lower than -950 might be regarded as normal (thin-section, nonenhanced, B40, YACTA). These ranges might be helpful in the judgement of individual measures.