Enhanced photoelectrocatalytic breakdown of Cu-cyanide complexes and copper recovery using photoelectrogenerated free chlorine

Nitrogen-containing wastewater fuel cells for total nitrogen removal and energy recovery based on Cl•/ClO• oxidation of ammonia nitrogen

The excess nitrogen discharge into water bodies has resulted in extensive water pollution and human health risks, which has become a critical global issue. Moreover, nitrogenous wastewater contains considerable chemical energy contributed by organic pollutants and nitrogenous compounds. Therefore, the treatment of various kinds of nitrogen-containing wastewater for nitrogen removal and energy recovery is of significance. Biological methode and advanced oxidation processes (AOPs) are the main methods for nitrogen removal. However, biological treatment is easily inhibited by high-salinity, high ammonia nitrogen (NH₃-N/NH₄⁺-N), nitrite and toxic organics in wastewater, which limits its application. AOPs mainly induce in situ generation of highly reactive species, such as hydroxyl radical (HO•), sulfate radical (SO₄•^-) and chlorine radicals (Cl•, ClO•, Cl₂•^-), for nitrogen removal. Nevertheless, HO• shows low reactivity and N₂ selectivity towards NH₃-N/NH₄⁺-N oxidation, and SO₄•^- also demonstrates unsatisfactory NH₃-N/NH₄⁺-N removal. It has been shown that Cl•/ClO• can efficiently remove NH₃-N/NH₄⁺-N with high N₂ selectivity. The generation of Cl•/ClO• can be triggered by various techniques, among which the PEC technique shows great potential due to its higher efficiency for Cl•/ClO• generation and eco-friendly approach for pollutants degradation and energy recovery by utilizing solar energy. Cl•/ClO• oxidation of NH₃-N/NH₄⁺-N and nitrate nitrogen (NO₃^--N) reduction can be strengthened through the design of photoanode and cathode materials, respectively. Coupling with this two pathways, an exhaustive total nitrogen (TN) removal system is designed for complete TN removal. When introducing the mechanism into photocatalytic fuel cells (PFCs), the concept of nitrogen-containing wastewater fuel cells (NFCs) is proposed to treat several typical types of nitrogen-containing wastewater, achieving high-efficiency TN removal, organics degradation, toxic chlorate control, and energy recovery simultaneously. Recent research progress in this field is reviewed, summarized and discussed, and in-depth perspectives are proposed, providing new ideas for the resource treatment of nitrogen-containing wastewater.

Catalysing electrowinning of copper from E-waste: A critical review

Smart technologies and digitalisation have increased the consumption of scarce metals that threaten the sustainability of intricated industries. Additionally, the growing streams of waste electrical and electronic equipment (e-waste) are significant hazards to public health and the environment. Thus, there is an escalating need to recover metals from e-waste for sustainable management of metal resources. Hydrometallurgical processing of e-waste, involving copper (Cu) leaching and its subsequent recovery from pregnant leach solution (PLS) via electrowinning, has emerged as an efficient strategy to close the recycling loop. Electrowinning from PLS demonstrated higher Cu recovery efficiency and operational feasibility with a lower reagent use and lesser waste generation. Nevertheless, multiple issues challenged its practical implementation, including selective recovery of Cu from PLS containing mixed metals and high energy consumption. This review (1) identifies the factors affecting Cu electrowinning from PLS; (2) evaluates the composition of lixiviants influencing Cu electrowinning; (3) appraises various catalysts developed for enhancing Cu electrodeposition; and (4) reviews coupled systems that minimised process energy consumption. From the literature review, electrocatalysts are prospective candidates for improving Cu electrowinning as they reduced the cathodic reduction overpotentials, enhanced surface reaction kinetics and increased current efficiency. Other catalysts, including bioelectrocatalysts and photoelectrocatalysts, are applicable for dilute electrolytes with further investigations required to validate their feasibility. The coupled systems, including slurry electrolysis, bioelectrochemical systems and coupled redox fuel cells, minimise process energy requirements by systematically coupling the cathodic reduction reaction with suitable anodic oxidation reactions having thermodynamically low overpotentials. Among these systems, slurry electrolysis utilising a single-step processing of e-waste is feasible for commericalisation though operational challenges must be addressed to improve its sustainability. The other systems require further studies to improve their scalability. It provides an important direction for energy-efficient Cu electrowinning from PLS, ultimately promoting a circular economy for the scarce metal resources.

Mineralization of cyanides via a novel Electro-Fenton system generating •OH and •O2. WATER RESEARCH 2022;209:117890. [PMID: 34856430 DOI: 10.1016/j.watres.2021.117890]

Traditional methods of cyanides' (CN-) mineralization cannot overcome the contradiction between the high alkalinity required for the inhibition of hydrogen cyanide evolution and the low alkalinity required for the efficient hydrolysis of cyanate (CNO-) intermediates. Thus, in this study, a novel Electro-Fenton system was constructed, in which the free cyanides released from ferricyanide photolysis can be efficiently mineralized by the synergy of •OH and •O2-. The complex bonds in ferricyanide (100 mL, 0.25 mM) were completely broken within 80 min under ultraviolet radiation, releasing free cyanides. Subsequently, in combination with the heterogeneous Electro-Fenton process, •OH and •O2- were simultaneously generated and 92.9% of free cyanides were transformed into NO3- within 120 min. No low-toxic CNO- intermediates were accumulated during the Electro-Fenton process. A new conversion mechanism was proposed that CN- was activated into electron-deficient cyanide radical (•CN) by •OH, and then the •CN intermediates reacted with •O2- via nucleophilic addition to quickly form NO3-, preventing the formation of CNO- and promoting the mineralization of cyanide. Furthermore, this new strategy was used to treat the actual cyanide residue eluent, achieving rapid recovery of irons and efficient mineralization of cyanides. In conclusion, this study proposes a new approach for the mineralization treatment of cyanide-containing wastewater.

Photoelectrocatalytic degradation of organics and formation of disinfection byproducts in reverse osmosis concentrate

The high content of organics in municipal reverse osmosis concentrate (ROC) requires proper treatment. Here, this study applied the photoelectrocatalysis (PEC) to reduce the concentration of organics in ROC. Meanwhile, the formation of disinfection byproducts (DBPs) was investigated. Participation of primary oxidants in organics removal and DBPs formation was revealed at different anodic potentials and pHs. The results showed that PEC process effectively oxidized the organics in ROC, achieving the highest mineralization rate of 63%. Increasing anodic potential from 0 to 1.0 V enhanced the oxidations of bulk organics (i.e., dissolved organic carbons (DOC), UV₂₅₄, fluorescence, large molecular weight compounds) and trace-level pharmaceuticals. Raising anodic potential to higher than 1.0 V slightly benefited the oxidations of bulk organics, owing to the relatively stable formation of hydroxyl radicals (OH•) and radical reactive chlorine species (r-RCS). The continuously rising concentration of free chlorine (FC) accelerated the decompositions of pharmaceuticals at ≥ 1.0 V. However, the generated FC raised the concentration of DBPs up to 10.36 μmol/L at 3.0 V. Lowering initial pH from 7-9 to 4-6 improved the mineralization rates by around 20% due to the higher formation of OH• at pH 4-6. Further decreasing initial pH from 6 to 4 enhanced the breakdown of large molecular weight compounds as well as the decomposition of pharmaceuticals. This came from the strengthened formation of FC and r-RCS at lower pHs. The intense participation of FC and r-RCS resulted in a higher total DBP concentration at pH 4-6 than that at pH 7-9. However, the individual species of DBPs changed differently toward the pH shift. The results of this study show that PEC could be an alternative for organics oxidation in ROC with proper control of DBPs formation.