Electrochemical properties of carbon nanotubes–hydrogenase conjugates Langmuir–Blodgett films

Corrosion behaviors and kinetics of nanoscale zero-valent iron in water: A review

Knowledge on corrosion behaviors and kinetics of nanoscale zero-valent iron (nZVI) in aquatic environment is particularly significant for understanding the reactivity, longevity and stability of nZVI, as well as providing theoretical guidance for developing a cost-effective nZVI-based technology and designing large-scale applications. Herein, this review gives a holistic overview on the corrosion behaviors and kinetics of nZVI in water. Firstly, Eh-pH diagram is introduced to predict the thermodynamics trend of iron corrosion. The morphological, structural, and compositional evolution of (modified-) nZVI under different environmental conditions, assisted with microscopic and spectroscopic evidence, is then summarized. Afterwards, common analytical methods and characterization technologies are categorized to establish time-resolved corrosion kinetics of nZVI in water. Specifically, stable models for calculating the corrosion rate constant of nZVI as well as electrochemical methods for monitoring the redox reaction are discussed, emphasizing their capabilities in studying the dynamic iron corrosion processes. Finally, in the future, more efforts are encouraged to study the corrosion behaviors of nZVI in long-term practical application and further build nanoparticles with precisely tailored properties. We expect that our work can deepen the understanding of the nZVI chemistry in aquatic environment.

Langmuir-Blodgett Graphene-Based Films for Algal Biophotovoltaic Fuel Cells

The prevalence of photosynthesis, as the major natural solar energy transduction mechanism or biophotovoltaics (BPV), has always intrigued mankind. Over the last decades, we have learned to extract this renewable energy through continuously improving solid-state semiconductive devices, such as the photovoltaic solar cell. Direct utilization of plant-based BPVs has, however, been almost impracticable so far. Nevertheless, the electrochemical platform of fuel cells (FCs) relying on redox potentials of algae suspensions or biofilms on functionalized anode materials has in recent years increasingly been demonstrated to produce clean or carbon-negative electrical power generators. Interestingly, these algal BPVs offer unparalleled advantages, including carbon sequestration, bioremediation and biomass harvesting, while producing electricity. The development of high performance and durable BPVs is dependent on upgraded anode materials with electrochemically dynamic nanostructures. However, the current challenges in the optimization of anode materials remain significant barriers towards the development of commercially viable technology. In this context, two-dimensional (2D) graphene-based carbonaceous material has widely been exploited in such FCs due to its flexible surface functionalization properties. Attempts to economically improve power outputs have, however, been futile owing to molecular scale disorders that limit efficient charge coupling for maximum power generation within the anodic films. Recently, Langmuir-Blodgett (LB) film has been substantiated as an efficacious film-forming technique to tackle the above limitations of algal BPVs; however, the aforesaid technology remains vastly untapped in BPVs. An in-depth electromechanistic view of the fabrication of LB films and their electron transference mechanisms is of huge significance for the scalability of BPVs. However, an inclusive review of LB films applicable to BPVs has yet to be undertaken, prohibiting futuristic applications. Consequently, we report an inclusive description of a contextual outline, functional principles, the LB film-formation mechanism, recent endeavors in developing LB films and acute encounters with prevailing BPV anode materials. Furthermore, the research and scale-up challenges relating to LB film-integrated BPVs are presented along with innovative perceptions of how to improve their practicability in scale-up processes.

Recent advances in carbon nanotubes-based biocatalysts and their applications

Enzymes have been incorporated into a wide variety of fields and industries as they catalyze many biochemical and chemical reactions. The immobilization of enzymes on carbon nanotubes (CNTs) for generating nano biocatalysts with high stability and reusability is gaining great attention among researchers. Functionalized CNTs act as excellent support for effective enzyme immobilization. Depending on the application, the enzymes can be tailored using the various surface functionalization techniques on the CNTs to extricate the desirable characteristics. Aiming at the preparation of efficient, stable, and recyclable nanobiocatalysts, this review provides an overview of the methods developed to immobilize the various enzymes. Various applications of carbon nanotube-based biocatalysts in water purification, bioremediation, biosensors, and biofuel cells have been comprehensively reviewed.

Interfacial self-assembly and characterization of chiral coordination polymer multilayers with bidentate ligands of hydroquinine anthraquinone-1,4-diyl diether as linkers

Chiral coordination polymers (CPs) have been prepared at the air-water interface by using the ligand of 1,4-bis(9-O-dihydroquininyl)anthraquinone [(DHQ)2AQN] and its enantiomer of 1,4-bis(9-O-dihydroquinidinyl)anthraquinone [(DHQD)2AQN] as linkers and AgNO3 as the connector. Surface pressure-area isotherms indicated that both ligands could form insoluble monomolecular layers on the pure water and AgNO3 subphase surfaces. Compared with the average molecular area on the pure water surface, that of the ligand increased about 10% when its monolayer was formed on the AgNO3 subphase surface due to the formation of Ag-(DHQ)2AQN and Ag-(DHQD)2AQN chiral CPs. These monolayers were deposited on the quartz, Si, and indium tin oxide (ITO) substrate surfaces via the Langmuir-Blodgett (LB) method. The as-prepared LB films were characterized by using UV-vis absorption and fluorescence spectroscopy, circular dichroism and X-ray photoelectron spectroscopy, as well as by using a scanning electron microscope and atomic force microscope. Broad fluorescence emissions were measured at about 365 and 525 nm for the ligands in the methanol solutions. The second emission red shifted to about 555 nm in the LB films of both pure ligands and their Ag-directed CPs. A couple of well-reversible redox waves were recorded and centered at about -0.2 ~ -0.3 V (vs Ag/AgCl) for the ITO electrode covered by the LB films of (DHQ)2AQN, (DHQD)2AQN, or of the Ag(+)-directed CPs, which were designated to one electron transfer process of the ligands. Small aggregates were observed for the LB films prepared at the lower surface pressures, which were compressed to form more uniform two-dimensional layers at the higher surface pressures.

Self-assembled monolayers of pyridylthio-functionalized carbon nanotubes used as a support to immobilize cytochrome c

Self-assembled monolayers (SAMs) of pyridylthio-functionalized multiwalled carbon nanotubes (pythio-MWNTs) have been constructed on the gold substrate surface, which were used as a support to immobilize cytochrome c (Cyt c). The assembly processes of the SAMs and adsorption of Cyt c were monitored by using quartz crystal microbalance (QCM). Based on the frequency change of the QCM resonator, the surface coverage for the SAMs of pythio-MWNTs was estimated to be about 5.2 μg/cm2, and that of the Cyt c adsorbed was about 0.29 μg/cm2. For the gold electrode modified by the SAMs of pythio-MWNTs-Cyt c, a quasi-reversible redox wave was recorded with the cathodic and anodic potentials at about -0.55 and -0.28 V vs Ag/AgCl, respectively. Compositions and morphologies of the SAMs before and after immobilization of Cyt c were characterized by X-ray photoelectron spectroscopy, Raman spectroscopy, scanning electron microscopy, and atomic force microscopy.

Immobilization of enzymes onto carbon nanotubes

The discovery of carbon nanotubes (CNTs) has opened a new door in nanotechnology. With their high surface area, unique electronic, thermal and mechanical properties, CNTs have been widely used as carriers for protein immobilization. In fact, carbon nanotubes present ideal support system without diffusional limitations, and also have the possibility of surface covalent functionalization. It is usually the oxidation process that introduces carboxylic acid groups. Enzymes and other proteins could be adsorbed or covalently attached onto carbon nanotubes. Adsorption of enzyme is a very simple and inexpensive immobilization method and there are no chemical changes of the protein. It has also been found that this technique does not alter structure and unique properties of nanotubes. However, a major problem in process designing is relatively low stability of immobilized protein and desorption from the carrier. On the other hand, while covalent immobilization provides durable attachment the oxidation process can reduce mechanical and electronic properties of carbon nanotubes. It can also affect the active site of enzyme and cause the loss of enzyme activity. Bioimmobilization studies have showed that there are strong interactions between carbon nanotubes surface and protein. The retention of enzyme structure and activity is critical for their application and it is of fundamental interest to understand the nature of these interactions. Atomic force microscopy (AFM), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and circular dichroism (CD) spectroscopy provide an insight into the structural changes that occur during the immobilization. The aim of this paper is to summarize progress of protein immobilization onto carbon nanotubes.

Langmuir-Blodgett films of pyridyldithio-modified multiwalled carbon nanotubes as a support to immobilize hydrogenase

Pyridylthio-modified multiwalled carbon nanotubes (pythio-MWNTs) have been prepared by a reaction of the oxidized MWNTs with S-(2-aminoethylthio)-2-thiopyridine hydrochloride. The obtained pythio-MWNTs nanocomposites formed stable floating monolayers at the air-water interface, which were transferred onto substrate surfaces by the Langmuir-Blodgett (LB) method. Compositions and morphologies of the LB films were characterized by absorption, Raman, X-ray photoelectron spectra as well as by scan electron microscopy and atomic force microscopy. These pythio-MWNTs LB films were then used as a support to immobilize hydrogenase (H(2)ase) to form bionanocomposite of pythio-MWNTs-H(2)ase. Cyclic voltammograms for indium tin oxide electrode covered with the pythio-MWNTs-H(2)ase films were investigated in both Ar and H(2) saturated 0.05 M KCl electrolyte solutions at pH from 4.0 to 9.0. A reversible redox couple of [4Fe-4S](2+/1+) clusters of H(2)ase was recorded when the pH value was 6.0 and 9.0, with reduction and oxidation potentials appearing at about -0.70 and -0.35 V vs Ag/AgCl, respectively. It was revealed that the H(2)ase was of high catalytic activity and strong stability in the LB films of pythio-MWNTs-H(2)ase. Hence, we suggested that the present bionanocomposites could be used as heterogeneous biocatalyst to catalyze reversible reaction between protons and H(2), resulting in potential applications in biohydrogen evolution and H(2) biofuel cells.

Covalent immobilization of proteins on carbon nanotubes using the cross-linker 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide--a critical assessment

Functionalization of carbon nanotubes (CNTs) with proteins is often a key step in their biological applications, particularly in biosensing. One popular method has used the cross-linker 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) to covalently conjugate proteins onto carboxylated CNTs. In this article, we critically assess the evidence presented in these conjugation studies in the literature. As CNTs have a natural affinity for diverse proteins through hydrophobic and electrostatic interactions, it is therefore important to differentiate protein covalent attachment from adsorption in the immobilization mechanism. Unfortunately, many studies of conjugating proteins onto CNTs using EDC lacked essential controls to eliminate the possibility of protein adsorption. In studies where the attachment was claimed to be covalent, discrepancies existed and the observed immobilization appeared to be due to adsorption. So far, bond analysis has been lacking to ascertain the nature of the attachment using EDC. We recommend that this approach of covalent immobilization of proteins on CNTs be re-evaluated and treated with caution.

Biocatalysts for fuel cells: efficient hydrogenase orientation for H2 oxidation at electrodes modified with carbon nanotubes

We report the modification of gold and graphite electrodes with commercially available carbon nanotubes for immobilization of Desulfovibrio fructosovorans [NiFe] hydrogenase, for hydrogen evolution or consumption. Multiwalled carbon nanotubes, single-walled carbon nanotubes (SWCNs), and amine-modified and carboxyl-functionalized SWCNs were used and compared throughout. Two separate methods were performed: covalent attachment of oriented hydrogenase by controlled architecture of carbon nanotubes at gold electrodes, and adsorption of hydrogenase at carbon-nanotube-coated pyrolytic graphite electrodes. In the case of self-assembled carbon nanotubes at gold electrodes, hydrogenase orientation based on electrostatic interaction with the electrode surface was found to control the electrocatalytic process for H(2) oxidation. In the case of carbon nanotube coatings on pyrolytic graphite electrodes, catalysis was controlled more by the geometry of the nanotubes than by the orientation of the enzyme. Noticeably, shortened SWCNs were demonstrated to allow direct electron transfer and generate high and quite stable current densities for H(2) oxidation via adsorbed hydrogenase, despite having many carboxylic surface functions that could yield unfavorable hydrogenase orientation for direct electron transfer. This result is attributable to the high degree of oxygenated surface functions in addition to the length of shortened SWCNs that yields highly divided materials.

Increasing amperometric biosensor sensitivity by length fractionated single-walled carbon nanotubes

In this work the sensitivity-increasing effect of single-walled carbon nanotubes (SWCNTs) in amperometric biosensors, depending on their average length distribution, was studied. For this purpose the SWCNTs were oxidatively shortened and subsequently length separated by size exclusion chromatography. Transmission electron micrographs of different fractions of SWCNTs were collected. Diaphorase "wired" to an osmium redox polymer was blended with the shortened SWCNTs of different lengths. Depending on the average length of the SWCNTs the sensitivity of the amperometric biosensor model system towards oxidation of 1,4-dihydronicotinamide adenine dinucleotide (NADH) was increased by a factor of five. The best performance was achieved with SWCNTs of medium length. The linear range for NADH detection was between 5 microM and 7 mM, the maximum sensitivity was 47 nA microM(-1) cm(-2), and the detection limit was 1 microM. The biosensor exhibited excellent electrocatalytic properties. Even at relatively high NADH concentrations the oxidative current was limited by the diffusion rate of NADH.