Electrochemical impedance studies of chitosan-modified electrodes for application in electrochemical sensors and biosensors

Determination of hordenine in beer samples and bodybuilding supplement at the electrified liquid-liquid interface

This paper presents an electrochemical approach to quantitative and qualitative determination of hordenine (HODE) at the electrified liquid-liquid interface (eLLI). In this regard, we have employed ion transfer voltammetry (ITV) as an electroanalytical detection technique. The response of peak current values (positive or negative currents) increased linearly with HODE concentration in the studied concentration range from 28.49 to 1250 μM. Furthermore, the effect of pH (2-12) of the aqueous phase on recorded HODE signals was studied. Based on the obtained results a number of significant physicochemical parameters, such as the formal Galvani potential of the ion transfer reaction (∆orgaqΦ'), diffusion coefficients (D), formal free Gibbs energy of the ion transfer reaction (∆G'aq→org) and water-1,2-dichloroethane partition coefficient (logPDCE') were determined. Finally, we have also showed that the elaborated method can be successfully used in the electroanalysis of complex matrixes, especially: beer and bodybuilding supplement samples.

Sustainable and biodegradable polymer packaging: Perspectives, challenges, and opportunities

The escalating environmental impact of non-biodegradable plastic waste has intensified global efforts to seek sustainable alternatives, with biodegradable polymers from renewable sources emerging as a promising solution. This manuscript provides the current perspectives, challenges, and opportunities within the field of sustainable and biodegradable packaging. Despite a significant market presence of conventional non-biodegradable petrochemical-based plastics, there is a growing trend towards the adoption of bio-based polymers from renewable resources driven by environmental sustainability and regulatory measures. However, the transition to biodegradable packaging is fraught with challenges, including scalability, cost-effectiveness, technological limitations, comprehensive waste management systems, and infrastructural needs. The manuscript highlights the intrinsic technological challenges and the need for advancements in material science to enhance the performance and adoption of biodegradable packaging. This paper also supply insights into the development and implementation of biodegradable packaging, offering a comprehensive overview of its role in achieving global sustainability goals.

Laser-ablated graphene electrodes modified with redox melanin-like film for redox capacitive sensing via the scavenging of nitrite ions

Improper use and harmful effects of nitrite ions pose a significant risk to human health. To address this concern, the use of carbon-based materials for electrochemical sensing is regarded as one of the most promising detection tools for ensuring the quality of drinking water and food products. In this context, we developed laser-ablated graphene electrodes (LAGEs) by direct laser scribing on a polyimide substrate, which were subsequently modified by electrochemical deposition of a redox-active melanin-like film (MeLF/LAGEs). Electrochemical investigations showed that the polymeric film had a beneficial effect on the heterogeneous electron transfer rate and induced an increase in the electrochemically active surface area and the charge capacitance of the modified electrodes owing to the newly added catechol and o-quinone moieties. Taking advantage of the redox activity of MeLF films, in-solution probe-free redox capacitance spectroscopy was used as a sensitive and highly adaptable method for sensing nitrite ions. Upon the interaction between the nitrite ions and the MeLF/LAGE redox interface, the charge distribution and its inherent redox capacitance were altered, which allowed the successful detection of nitrite ions with a detection limit of 2.45 μM (S/N = 3) and a wide dynamic range (10 μM to 10 mM). This sensor demonstrated high recovery rates when applied to tap and mineral water samples and five different processed meat samples, highlighting its potential for the routine detection of nitrite ions through scavenging.

MnFe@N-CNTs Based Lactate Biomicrochips for Nonintrusive and Onsite Periodontitis Diagnosis

In clinical settings, saliva has been established as a straightforward, noninvasive medium for diagnosing periodontitis. However, the precise diagnosis is often hampered by the absence of a specialized analyzer capable of detecting low concentrations of biomarkers typically found in saliva. In this study, we present a noninvasive, on-site screen-printed biomicrochip specifically engineered for the precise and sensitive quantification of lactate concentrations in saliva, a critical biomarker in the diagnosis of periodontitis. The microchip is constructed using a nanostructured ink formulation that includes MnFe@N-doped carbon nanotubes (MnFe@N-CNTs). These MnFe@N-CNTs exhibit a high degree of graphitization and low electrical resistance, significantly augmenting the electrocatalytic efficiency of the enzymatic reaction of lactate. This results in doubled sensitivity and a detection limit that surpasses those of the current advanced salivary assay methods. Remarkably, within just 30 s, the biomicrochip can quantitatively and precisely measure lactate concentrations in the saliva of 10 patients, which provides valuable insights into the severity of their periodontitis. This biosensor holds excellent potential for large-scale production and could broaden the scope of biomarker recognition, paving the way for the analysis of a wider range of oral diseases.

Defective zirconium/titanium bimetallic metal-organic framework as a highly selective and sensitive electrochemical aptasensor for deoxynivalenol determination in foodstuffs

An electrochemical aptsensor for deoxynivalenol determination was successfully designed and constructed based on a defective bimetallic organic framework (denoted as ZrTi-MOF). The high porosity, large specific surface area, several structural defects, mixed metal clusters, and rich functionality of ZrTi-MOF markedly enhanced its electrochemical activity and facilitated the aptamer immobilization. As a result, the ZrTi-MOF-based aptasensor shows high sensitivity to detect deoxynivalenol via specific recognition between aptamer and deoxynivalenol, as well as the formation of aptamer-deoxynivalenol complex. On this basis, the developed ZrTi-MOF-based impedimetric aptasensor showed a low detection limit of 0.24 fg mL-1 for deoxynivalenol determination in the deoxynivalenol concentration range 1 fg mL-1- 1 ng mL-1 under optimized conditions, which also exhibited satisfactory selectivity, stability, reproducibility, and regenerability. Furthermore, determination of deoxynivalenol was achieved in bread and wheat flour samples via the developed ZrTi-MOF-based deoxynivalenol aptasensor. The result from this study showed that the ZrTi-MOF-based electrochemical aptasensor could become a promising strategy for detecting deoxynivalenol in foodstuffs in the future.

Fast electrochemical impedance spectroscopy of lithium-ion batteries based on the large square wave excitation signal

Electrochemical impedance spectroscopy (EIS) is a technique for electrochemical characterization that is sensitive to the battery state and can uncover multidimensional electrochemical evolution information within the battery. Lithium-ion batteries usually need to be used in conjunction with power conversion circuits, while conventional EIS testing is conducted offline and is time-consuming, which cannot effectively monitor the battery characteristics during use. To match the characteristics of the square wave signal during power switching, a rapid EIS measurement method for lithium-ion batteries based on the large square wave excitation signal is proposed in this paper, and develops a testing device with a response time of microseconds. The proposed method and device are applied to estimate the state of health (SOH) of the battery. In conclusion, we proposed method enhances the capabilities of EIS testing technology and has a good application prospect in real-time online impedance monitoring.

Synthesis and characterization of sulfonated poly(eugenol-co-allyleugenol) membranes for proton exchange membrane fuel cells

The research of sulfonated eugenol-allyleugenol copolymer (SPEAE) based membrane for fuel cell from eugenol derivate had been conducted. First, eugenol was reacted with various weights of allyl eugenol to form eugenol-allyleugenol copolymer (PEAE). Determination of the optimum composition of PEAE was done by testing the swelling properties. Then, PEAE was sulfonated using concentrated sulfuric acid with time variations of 1, 2, 3, 4, and 5 h to form SPEAE. The SPEAE produced was tested for the degree of sulfonation, water uptake, cation exchange capacity, and membrane proton conductivity. In addition, the characteristics of the PEAE and SPEAE copolymer membranes were also analyzed using FTIR spectrophotometers, 1H-NMR, TGA, and DSC. The results showed that the copolymerization of eugenol:allyleugenol (EG:AEG) with a ratio of 10:1 gave the lowest swelling degree. The best SPEAE copolymer was obtained from sulfonation for 2 h with yield, degree of sulfonation, water absorption value, proton conductivity, and cation exchange capacity of 90.6%, 12.87%, 50.7%, 1.83 × 10^-5 S cm^-1 and 0.356 meq/g, respectively. FTIR analysis shows the formation of PEAE with the loss of the vinyl eugenol groups used to form the polymer and shows the formation of SPEAE in the presence of sulfonate groups from the sulfonation reaction. ¹H-NMR also confirmed the presence of the PEAE and SPEAE copolymers. In addition, analysis of thermal properties with TGA and DSC also showed that sulfonate treatment could improve membrane stability.

Electrochemical Determination of Morin in Natural Food Using a Chitosan-Graphene Glassy Carbon Modified Electrode

This report presents a new application for the chitosan-graphene glassy carbon electrode (Ch-G/GCE) system in the determination of the hydroxyflavonoid morin (MR), one of the flavonoids with the highest favorable activity for people, due to its natural properties by square-wave voltammetry (SWV). The anodic peak current for MR was observed at 0.50 V with an increase of 73% compared with the glassy carbon electrode unmodified. The surface areas of Ch-G/GCE, Ch/GCE and GCE evaluated by cyclic voltammetry were 0.140, 0.053 and 0.011 cm², respectively. Additionally, an increase greater than 100% compared to the electrode without modification was observed. The detection limit was 0.30 µmol/L for MR, and the relative standard deviations (RSDs) were 1.8% (n = 6). Possible interferences as quercetin, rutin, and applications in real samples were also evaluated with very acceptable results.

Curcumin Sustained Release with a Hybrid Chitosan-Silk Fibroin Nanofiber Containing Silver Nanoparticles as a Novel Highly Efficient Antibacterial Wound Dressing

Drug loading in electrospun nanofibers has gained a lot of attention as a novel method for direct drug release in an injury site to accelerate wound healing. The present study deals with the fabrication of silk fibroin (SF)-chitosan (CS)-silver (Ag)-curcumin (CUR) nanofibers using the electrospinning method, which facilitates the pH-responsive release of CUR, accelerates wound healing, and improves mechanical properties. Response surface methodology (RSM) was used to investigate the effect of the solution parameters on the nanofiber diameter and morphology. The nanofibers were characterized via Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), zeta potential, and Dynamic Light Scattering (DLS). CS concentration plays a crucial role in the physical and mechanical properties of the nanofibers. Drug loading and entrapment efficiencies improved from 13 to 44% and 43 to 82%, respectively, after the incorporation of Ag nanoparticles. The application of CS hydrogel enabled a pH-responsive release of CUR under acid conditions. The Minimum Inhibitory Concentration (MIC) assay on E. coli and S. aureus bacteria showed that nanofibers with lower CS concentration cause stronger inhibitory effects on bacterial growth. The nanofibers do not have any toxic effect on cell culture, as revealed by in vitro wound healing test on NIH 3T3 fibroblasts.

Textile-Based Wearable Sensor for Skin Hydration Monitoring

This research describes a wearable skin hydration sensor based on cotton textile to determine the state of hydration within the skin via impedance analysis. The sensor structure comprises a textile substrate, thermoplastic over-layer, conductive patterns, and encapsulant, designed for stable and reliable monitoring of the skin's impedance change in relation to hydration level. The porcine skin with different hydration levels was prepared as a model system of the skin, and the textile-based sensor carefully investigated the porcine skin samples' impedance characteristics. The impedance study reveals that (1) the total impedance of skin decreases as its hydration level increases, and (2) the impedance of the stratum corneum and epidermis layers are more dominantly affected by the hydration level of the skin than the dermis layer. Even after repetitive bending cycles, the impedance data of skin measured by the sensor exhibit a reliable dependence on the skin hydration level, which validates the flexibility and durability of the sensor. Finally, it is shown that the textile-based skin hydration sensor can detect various body parts' different hydration levels of human skin while maintaining a stable conformal contact with the skin. The resulting data are well-matched with the readings from a commercial skin hydration sensor.

Novel enzymatic graphene oxide based biosensor for the detection of glutathione in biological body fluids

In this work, we report a novel enzymatic biosensor based on glutathione peroxidase (GSH-Px), graphene oxide (GO) and nafion for the electrochemical sensing of glutathione (GSH) in body fluids. GSH-Px was immobilized covalently via 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) onto modified glassy carbon electrode (GCE) decorated with GO and nafion and successfully used for sensing of GSH in the presence of H₂O₂ as catalyst with Michaelis-Menten constant about 0.131 mmol/L. The active surface are of GCE improve from 0.183 cm² to 0.225 cm² after modification with GO. The introduced biosensor (GSH-Px/GO/nafion/GCE) was used for monitoring of GSH over the range 0.003-370.0 μM, with a detection limit of 1.5 nM using differential pulse voltammetric (DPV) method. The GSH-Px/GO/nafion/GCE was successfully applied to the determination of GSH in real samples.

Electrochemical Characterization of Modified Glassy Carbon Electrodes for Non-Enzymatic Glucose Sensors

The diversity of materials proposed for non-enzymatic glucose detection and the lack of standardized protocols for assessing sensor performance have caused considerable confusion in the field. Therefore, methods for pre-evaluation of working electrodes, which will enable their conscious design, are currently intensively sought. Our approach involved comprehensive morphologic and structural characterization of copper sulfides as well as drop-casted suspensions based on three different polymers-cationic chitosan, anionic Nafion, and nonionic polyvinylpyrrolidone (PVP). For this purpose, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Raman spectroscopy were applied. Subsequently, comparative studies of electrochemical properties of bare glassy carbon electrode (GCE), polymer- and copper sulfides/polymer-modified GCEs were performed using electrochemical impedance spectroscopy (EIS) and voltammetry. The results from EIS provided an explanation for the enhanced analytical performance of Cu-PVP/GCE over chitosan- and Nafion-based electrodes. Moreover, it was found that the pH of the electrolyte significantly affects the electrocatalytic behavior of copper sulfides, indicating the importance of OH_ads in the detection mechanism. Additionally, diffusion was denoted as a limiting step in the irreversible electrooxidation process that occurs in the proposed system.

A voltammetric sensor based on a carbon black and chitosan-stabilized gold nanoparticle nanocomposite for ketoconazole determination

A modified glassy carbon electrode with carbon black (CB) and gold nanoparticles (AuNPs) within a crosslinked chitosan (CTS) film is proposed in this work. The electroanalytical performance of the modified CB-CTS-AuNPs/GCE has been evaluated towards the voltammetric sensing of ketoconazole (KTO), a widespread antifungal drug. The nanocomposite was characterized by scanning electron microscopy, X-ray diffraction spectroscopy, and electrochemistry experiments. The evaluation of the electrochemical behaviour of KTO on the proposed modified electrode shows an irreversible oxidation process at a potential of +0.65 V (vs. Ag/AgCl (3.0 mol L^-1 KCl)). This redox process was explored to carry out KTO sensing using square-wave voltammetry. The analytical curve was linear in the KTO concentration range from 0.10 to 2.9 μmol L^-1, with a limit of detection (LOD) of 4.4 nmol L^-1 and a sensitivity of 3.6 μA L μmol^-1. This modified electrode was successfully applied to the determination of KTO in pharmaceutical formulations and biological fluid samples.

Stimuli-Responsive Templated Polymer as a Target Receptor for a Conformation-based Electrochemical Sensing Platform

The use of highly crosslinked molecularly imprinted polymers as a synthetic target receptor has the limitations of restricted accessibility to the binding sites resulting in slow response time. Moreover, such artificial receptors often require additional transduction mechanisms to translate target binding events into measurable signals. Here, we propose the development of a single-chain stimuli-responsive templated polymer, without using any covalent interchain crosslinkers, as a target recognition element. The synthesized polymer chain exhibits preferential binding with the target molecule with which the polymer is templated. Moreover, upon specific target recognition, the polymer undergoes conformation change induced by its particular stimuli responsiveness, namely the target binding event. Such templated single-chain polymers can be attached to the electrode surface to implement a label-free electrochemical sensing platform. A target analyte, 4-nitrophenol (4-NP), was used as a template to synthesize a poly-N-isopropylacrylamide (PNIPAM)-based copolymer chain which was anchored to the electrode to be used as a selective receptor for 4-NP. The electrode surface chemistry analysis and the electrochemical impedance study reveal that the polymer concentration, the interchain interactions, and the Hofmeister effect play a major role in influencing the rate of polymer grafting as well as the morphology of the polymers grafted to the electrode. We also show that the specific binding between 4-NP and the copolymer results in a substantial change in the charge transfer kinetics at the electrode signifying the polymer conformation change.

Selective nanomolar electrochemical detection of serotonin, dopamine and tryptophan using TiO2/RGO/CPE – influence of reducing agents

TiO2/RGO nanocomposites were synthesised via a simple one-pot hydrothermal method and used as a modifier in carbon paste electrode for the sensitive determination of serotonin.

Performance of chitosan polymer as platform during sensors fabrication and sensing applications

Chitosan is an important polymer produced from deacetylation of several sea and insects crusts. Due to its environmental fate and biological biocompatibility, it can be used in several biological and environmental applications. Sensing of biological compounds in human bodies and also in serum, blood, and different body fluids has found an important application instead of direct determination of the body fluids using complicated tools. Sensing process of biological compounds during bio-analysis of the biological systems, especially human fluids lack of several parameters including: high sensitivity, repeatability, speed of analysis and biocompatibility of the used analytical methods, especially in-vivo analysis. That was due to the time between sample handling and sample determination can change various components and concentrations of the bio-compounds. The need for in-situ analysis was directed the researchers for biosensors to overcome the upgrading problems of bio-analysis. Biosensors were the future of this issue. Chitosan can reserve as great platform for fabrication of different sensors to determine the elements, compounds and body bioactive compounds. The presence of different terminal amino and hydroxyl groups within chitosan framework facilitates the immobilization of different biomarkers to be used as sensing elements for the determined compounds. The use of chitosan as sensors platform was enhanced by using chitosan in its nanoforms.

Chitin and Chitinases: Biomedical And Environmental Applications of Chitin and its Derivatives

Disposal of chitin wastes from crustacean shell can cause environmental and health hazards. Chitin is a well known abundant natural polymer extracted after deproteinization and demineralization of the shell wastes of shrimp, crab, lobster, and krill. Extraction of chitin and its derivatives from waste material is one of the alternative ways to turn the waste into useful products. Chitinases are enzymes that degrade chitin. Chitinases contribute to the generation of carbon and nitrogen in the ecosystem. Chitin and chitinolytic enzymes are gaining importance for their biotechnological applications. The presence of surface charge and multiple functional groups make chitin as a beneficial natural polymer. Due to the reactive functional groups chitin can be used for the preparation of a spectrum of chitin derivatives such as chitosan, alkyl chitin, sulfated chitin, dibutyryl chitin and carboxymethyl chitin for specific applications in different areas. The present review is aimed to summarize the efficacy of the chitinases on the chitin and its derivatives and their diverse applications in biomedical and environmental field. Further this review also discusses the synthesis of various chitin derivatives in detail and brings out the importance of chitin and its derivatives in biomedical and environmental applications.

Review of Chitosan-Based Polymers as Proton Exchange Membranes and Roles of Chitosan-Supported Ionic Liquids

Perfluorosulphonic acid-based membranes such as Nafion are widely used in fuel cell applications. However, these membranes have several drawbacks, including high expense, non-eco-friendliness, and low proton conductivity under anhydrous conditions. Biopolymer-based membranes, such as chitosan (CS), cellulose, and carrageenan, are popular. They have been introduced and are being studied as alternative materials for enhancing fuel cell performance, because they are environmentally friendly and economical. Modifications that will enhance the proton conductivity of biopolymer-based membranes have been performed. Ionic liquids, which are good electrolytes, are studied for their potential to improve the ionic conductivity and thermal stability of fuel cell applications. This review summarizes the development and evolution of CS biopolymer-based membranes and ionic liquids in fuel cell applications over the past decade. It also focuses on the improved performances of fuel cell applications using biopolymer-based membranes and ionic liquids as promising clean energy.

Nanomolar level sensing of glucose in food samples using glucose oxidase confined MWCNT-Inulin-TiO2 bio-nanocomposite

Development of an effective sensor for sensing glucose in commercially available "sugar free" food products is important as people are becoming diabetic health conscious. Although multi-walled carbon nanotubes (MWCNTs) possess interesting electrical properties, their hydrophobic nature limits their applications. Their hydrophilicity can be improved through modification. In the present study, Inulin, that was isolated from Allium sativum L. using hot water diffusion and incorporated with titanium dioxide (TiO₂), was used for the modification of MWCNTs. The as-synthesized MWCNT-Inulin-TiO₂ bio-nanocomposite immobilized with glucose oxidase (GOx) was incorporated into the carbon paste matrix and was utilized for the sensing of glucose in food products. Differential pulse voltammetric studies revealed that the fabricated electrode demonstrated good linear range (1.6 nM to 1 μM) and was sensitive to nanomolar concentrations of glucose with a very low limit of detection up to 0.82 nM and exhibited a long term stability of 150 days.

Palygorskite modified with N-doped carbon for sensitive determination of lead(II) by differential pulse anodic stripping voltammetry

A glassy carbon electrode (GCE) was coated with N-doped carbon-modified palygorskite and used as an electrochemical sensor for determination of Pb(II) by differential pulse anodic stripping voltammetry. To obtain high reproducibility and sensitivity, optimum experimental conditions for lead deposition are studied. Voltammetric responses of the modified GCE prepared with different ratios of carbon and palygorskite are examined under same conditions. Compared with a bare GCE, a N-doped carbon modified/GCE and a bismuth-modified GCE, N-doped carbon-modified palygorskite greatly improves the performance of GCE. Response is the best and the interfacial impedance is minimized if the fraction of carbon coating is 31%. This indicates that its performance is due to the synergies between palygorskite and N-doped carbon. Figures of merit for the modified GCE include (a) a preconcentration time of 180 s, (b) a detection limit of 0.42 μg·L^-1 (2σ criterion), and (c) a linear response in the 4.0 μg·L^-1 to 10.0 mg·L^-1 Pb(II) concentration range. The method is successfully applied to the determination of Pb(II) in spiked tape water and gives recoveries between 97.1 and 104.3%. Graphical abstract Schematic representation of different adsorption sites of Pb(II) and the optimal carbon content. The wide detection range is attributed to the synergetic effect of N-doped carbon modified palygorskite.

Effect of Poly-l-Lysine Polycation on the Glucose Oxidase/Ferricyanide Composite-Based Second-Generation Blood Glucose Sensors

Second-generation glucose biosensors are presently the mainstream commercial solution for blood glucose measurement of diabetic patients. Screen-printed carbon electrodes (SPCEs) are the most-used substrate for glucose testing strips. This study adopted hydrophilic and positively charged α-poly-l-lysine (αPLL) as the entrapment matrix for the immobilization of negatively charged glucose oxidase (GOx) and ferricyanide (FIC) on SPCEs to construct a disposable second-generation glucose biosensor. The αPLL modification is shown to facilitate the redox kinetics of FIC and ferrocyanide on the SPCEs. The SPCEs coated with 0.5 mM GOx, 99.5 mM FIC, and 5 mM αPLL had better sensitivity for glucose detection due to the appreciable effect of protonated αPLL on the promotion of electron transfer between GOx and FIC. Moreover, the SPCEs coated with 0.5 mM GOx, 99.5 mM FIC, and 5 mM αPLL were packaged as blood glucose testing strips for the measurement of glucose-containing human serum samples. The glucose testing strips had good linearity from 2.8 mM to 27.5 mM and a detection limit of 2.3 mM. Moreover, the 5 mM αPLL-based glucose testing strips had good long-term stability to maintain GOx activity in aging tests at 50 °C.