Studies on electrochemical hydrodebromination mechanism of 2,5-dibromobenzoic acid on Ag electrode by in situ FTIR spectroscopy

Feasibility study on the electrochemical reductive decomposition of PFOA by a Rh/Ni cathode

The discharge of widely used per- and poly-fluorinated compounds (PFCs) leads to their environmental prevalence, bioaccumulation and biotoxicity; and attracts researches focusing on their treatment in wastewater. Electrochemical reductive treatment is a promising alternative due to its milder reaction conditions and easy operation. The feasibility of electrochemical reductive decomposition of PFOA using a Rh/Ni cathode was explored. The Rh/Ni cathode was fabricated by coating Rh³⁺ on Ni foil through electrodeposition. The Rh coating was primarily elemental and in a Rh(111) crystalline form. PFOA decomposition and defluorination were observed when using the Rh/Ni cathode where DMF was the solvent and the cathode potential was -1.25 V. A hydrodefluorination reaction was considered having occurred. Because possessing d electrons and empty d orbitals, the Rh coating enhanced PFOA adsorption onto the cathode surface and facilitated CF bond activation through Rh···F interactions. Moreover, the Rh(111) crystal helped chemisorb the generated H* and supply it participating in PFOA decomposition. With the continuous interaction of cathode-supplied electrons, CF bond would ultimately dissociate and transform to CH bond by H* substitution. Adding FeCp₂* as a supporting electrolyte enhanced PFOA decomposition by working as the shuttle facilitating PFOA migration to the cathode surface.

Influence of dimethylphenol isomers on electrochemical degradation: Kinetics, intermediates, and DFT calculation

Dimethylphenol isomers (DMP) pose a great threat to the environment, and the electrooxidation (EO) process proves to be an extraordinarily effective method to degrade DMP. However, the EO performance is affected by the molecular structure of DMP and the adopted experimental parameters. In this study, the effects of 2,4-DMP and 2,6-DMP on the working potential, limiting current density (J_lim), and pH were systematically analysed, with Ti-mesh plates used as the cathode and Ti/PbO₂ as the anode. The peak potentials of 2,4-DMP and 2,6-DMP were determined to be 0.83 V and 0.77 V by cyclic voltammetry, with J_lim were 2.5 mA·cm^-2 and 2.0 mA·cm^-2, respectively. The whole process exhibited pseudo-first-order kinetics, and the kinetic constants (K) for the degradation of 2,4-DMP and 2,6-DMP were determined to be 0.0041 min^-1 and 0.0150 min^-1, respectively. Additionally, the optimal initial pH value for 2,4-DMP and 2,6-DMP was 5.0, where the highest hydroxyl (OH) radical density, as determined by the electron spin technique (ESR), was achieved at a higher current density. Comparatively, the OH radical density in the 2,6-DMP solution was lower than that in 2,4-DMP. In situ Fourier infrared (FT-IR) spectroscopy, GC-MS, and density functional theory (DFT) were employed to explore three possible degradation pathways. The main intermediates for 2,4-DMP degradation were determined to be quinone and ether, while that for 2,6-DMP degradation was quinone. According to the results of this study, the molecular structure (different methyl group positions on the benzene ring) has a great influence on the EO process.

An efficient reduction of unsaturated bonds and halogen-containing groups by nascent hydrogen over Raney Ni catalyst

Presence of unsaturated bonds and halogen-containing groups is the most common characteristic of toxic and harmful environmental pollutants. Herein, catalytic hydrogenation was chosen as a water quality control method for such contaminants. Considering the safety, availability and activity of the hydrogen source, electrochemical in situ hydrogen generation was introduced. Under the combined action of Raney Ni (R-Ni) and nascent hydrogen (Nas-H₂), three compounds (50 mg L^-1, 90 ml), i.e., acrylamide, 2, 6-dibromo-4-nitrophenol and 2-chloro-4-fluorobenzonitrile achieved complete hydrogenation reduction in a short time. The improved system realized the quantitative consumption of hydrogen source and the efficient operation of hydrogenation reaction under mild conditions. Additionally, the alkaline environment formed by hydrogen evolution reaction (HER) avoided secondary pollution caused by catalyst dissolution. Atomic hydrogen (H·) produced from R-Ni and Nas-H₂ was the active free radical of the reaction. The hydrogenation activities of different functional groups were obtained according to the following order: Ph-NO₂ ＞ -C = C- ＞ Ph-C≡N ＞ Ph-Br ＞ Ph-Cl ＞ Ph-F. This work indicates that the catalytic hydrogenation system consisting of R-Ni and Nas-H₂ is a promising technology to reduce unsaturated bonds and halogen-containing groups.

Complete dechlorination of 2,4-dichlorophenol in aqueous solution on palladium/polymeric pyrrole-cetyl trimethyl ammonium bromide/foam-nickel composite electrode

The electrochemically reductive dechlorination of 2,4-dichlorophenol (2,4-DCP) in aqueous solution on palladium/polymeric pyrrole-cetyl trimethyl ammonium bromide/foam-nickel electrode (Pd/PPy-CTAB/foam-Ni electrode) was investigated in this paper. Pd/PPy-CTAB/foam-Ni electrode was prepared and characterized by cyclic voltammetry (CV), scanning electron microscope (SEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) adsorption and inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The influences of some experimental factors such as the dechlorination current, dechlorination time and the initial pH on the removal efficiency and the current efficiency of 2,4-DCP dechlorination on Pd/PPy-CTAB/foam-Ni electrode were studied. Complete removal of 2,4-DCP was achieved and the current efficiency of 47.4% could be obtained under the conditions of the initial pH of 2.2, the dechlorination current of 5 mA and the dechlorination time of 50 min when the initial 2,4-DCP concentration was 100 mg L(-1). The analysis of high performance liquid chromatography (HPLC) identified that the intermediate products were 2-chlorophenol (2-CP) and 4-chlorophenol (4-CP). The final products were mainly phenol. Its further reduction product cyclohexanone was also detected. The electrocatalytic dechlorination pathways of 2,4-DCP on Pd/PPy-CTAB/foam-Ni electrode were discussed. The stability of the electrode was favorable that it could keep dechlorination efficiency at 100% after having been reused 10 times. Results revealed that the stable prepared Pd/PPy-CTAB/foam-Ni electrode presented a good application prospect in dechlorination process with high effectiveness and low cost.