Novel organic redox catalyst for the electroreduction of oxygen to hydrogen peroxide

A Chlorine-Resistant Self-Doped Nanocarbon Catalyst for Boosting Hydrogen Peroxide Synthesis in Seawater

Developing seawater-compatible hydrogen peroxide (H2O2) electroproduction technologies is crucial for advancing marine resource utilization in coastal regions. However, designing efficient and highly stable non-noble metal catalysts for two-electron oxygen reduction reaction (2e- ORR) in seawater environment remains a challenging task due to the corrosive and toxic nature of chloride ions (Cl-). Herein, we present, for the first time, a novel nitrogen and oxygen self-doped defect-rich nanocarbon (NO-DC700) catalyst, derived from silk fiber, which addresses these challenges with low toxicity, cost-effectiveness, and high adaptability. The obtained NO-DC700 catalyst demonstrates an impressive H2O2 production rate of up to 4997 mg L-1 h-1, a high Faradaic efficiency of 96.5 %, and produces 4.3 wt % H2O2 after 20 hours of stable operation, placing it among the highest-performing catalysts reported in neutral electrolytes. Theoretical calculations reveal that NO-DC700's superior 2e- ORR performance is due to the synergistic effect of graphitic nitrogen and C-OH, which inhibits Cl- adsorption and promotes *OOH adsorption. Additionally, integrating 2e- ORR with Fenton-like technology enables rapid degradation of organic pollutants and effective inactivation of seawater algae, offering significant potential for mitigating coastal eutrophication and red tide pollution. This work provides valuable insights into H2O2 electrosynthesis in seawater solution and promises advancements in ocean-energy applications.

Catalyst durability in electrocatalytic H2O2 production: key factors and challenges

On-demand electrocatalytic hydrogen peroxide (H2O2) production is a significant technological advancement that offers a promising alternative to the traditional anthraquinone process. This approach leverages electrocatalysts for the selective reduction of oxygen through a two-electron transfer mechanism (ORR-2e-), holding great promise for delivering a sustainable and economically efficient means of H2O2 production. However, the harsh operating conditions during the electrochemical H2O2 production lead to the degradation of both structural integrity and catalytic efficacy in these materials. Here, we systematically examine the design strategies and materials typically utilized in the electroproduction of H2O2 in acidic environments. We delve into the prevalent reactor conditions and scrutinize the factors contributing to catalyst deactivation. Additionally, we propose standardised benchmarking protocols aimed at evaluating catalyst stability under such rigorous conditions. To this end, we advocate for the adoption of three distinct accelerated stress tests to comprehensively assess catalyst performance and durability.

Electrochemical Generation of Hydroxide and Hydrogen Peroxide for Hydrolysis of Sulfuryl Fluoride Fumigant

The post-harvest fumigant, sulfuryl fluoride (SO2F2), is a >1000-fold more potent greenhouse gas than carbon dioxide and methane. Pilot studies have shown that SO2F2 fumes vented from fumigation chambers can be captured and hydrolyzed by hydroxide (OH-) and hydrogen peroxide (H2O2) at pH ∼ 12 in a scrubber, producing SO42- and F- as waste salts. To reduce the costs and challenges associated with purchasing and mixing these reagents onsite, this study evaluates the electrochemical generation of OH- and H2O2 within spent scrubbing solution, taking advantage of the waste SO42- and F- as free sources of electrolyte. The study used a gas diffusion electrode constructed from carbon paper coated with carbon black as a catalyst selective for the reduction of O2 to H2O2. Under galvanostatic conditions, the study evaluated the effect of electrochemical conditions, including applied cathodic current density and electrolyte strength. Within an electrolyte containing 200 mM SO42- and 400 mM F-, comparable to the waste salts generated by a SO2F2 scrubbing event, the system produced 250 mM H2O2 at pH 12.6 within 4 h with a Faradaic efficiency of 98.8% for O2 reduction to H2O2. In a scrubbing-water sample from lab-scale fumigation, the system generated ∼200 mM H2O2 at pH 13.5 within 4 h with a Faradaic efficiency of 75.6%. A comparison of the costs to purchase NaOH and H2O2 against the electricity costs for electrochemical treatment indicated that the electrochemical approach could be 38-71% lower, depending on the local cost of electricity.

Organic Electrosynthesis Towards Sustainability: Fundamentals and Greener Methodologies

The adoption of new measures that preserve our environment, on which our survival depends, is a necessity. Electro-organic processes are sustainable per se, by producing the activation of a substrate by electron transfer at normal pressure and room temperature. In the recent years, a highly crescent number of works on organic electrosynthesis are available. Novel strategies at the electrode are being developed enabling the construction of a great variety of complex organic molecules. However, the possibility of being scaled-up is mandatory in terms of sustainability. Thus, some electrochemical methodologies have demonstrated to report the best results in reducing pollution and saving energy. In this personal account, these methods have been compiled, being organized as follows: • Direct discharge electrosynthesis • Paired electrochemical reactions. and • Organic transformations utilizing electrocatalysis (in absence of heavy metals). Selected protocols are herein presented and discussed with representative recent examples. Final perspectives and reflections are also considered.

A biomass derived N/C-catalyst for the electrochemical production of hydrogen peroxide

An all-in-one (carbon source, self-template, and heteroatom) biomass precursor to develop an electrocatalyst for highly selective and energy-saving H₂O₂ production.