Electrochemically imprinted molecular recognition sites on multiwalled carbon-nanotubes/pencil graphite electrode surface for enantioselective detection of d- and l-aspartic acid

Evaluation of the Potential of a Ratiometric Fluorescence Sensor for Sensitively Recognizing 1-Hydroxypyrene in Real Urine Samples Based on a Stable Zn-MOF

In the work, a 3D Zn-based MOF, [CH3(NH2)2][Zn2(obdb)(OH)]·DMF (compound 1) has been formed successfully through the self-assembly of Zn(II) ion and organic linker H4obdb (4',4‴-oxybis[1,1'-biphenyl]-3,5-dicarboxylic acid, a high-symmetrical tetra-carboxylate ligand) under solvothermal conditions. In the structure of compound 1, Zn and the symmetry-generated ones constitute a tetra-nuclear cluster [Zn4(μ2-COO)8(μ3-OH)2], and then by the coordination of tetra-nuclear clusters and the organic linkers, a 3D stair-like framework containing a 1D rectangular channel with the porosity of 47.3% is generated. Interestingly, compound 1 is confirmed to possess striking air and pH stability. Noteworthily, the results of detecting studies certify that compound 1 can serve as a prospective ratiometric fluorescence sensor for selectively recognizing 1-hydroxypyrene (1-HP) among diverse urine components and a promising fluorescence probe for Asp from other 11 kinds of amino acids depended on "turn-off" effects decorated with high quenching efficiencies (97.5% for 1-HP and 94.3% for Asp) and outstanding sensitivity with Ksv values of 1.84 × 105 M-1 for 1-HP and 1.41 × 104 M-1 for Asp in a DMF-H2O binary system. Amazingly, the sensing capacities of compound 1 maintain similar levels in fresh human urine compared with those in the DMF-H2O binary system, giving the Ksv values of 5.79 × 104 M-1 for 1-HP and 1.72 × 104 M-1 for Asp.

Electrochemical detection of poly(3-hydroxybutyrate) production from Burkholderia glumae MA13 using a molecularly imprinted polymer-reduced graphene oxide modified electrode

The development and application of an electrochemical sensor is reported for detection of poly(3-hydroxybutyrate) (P3HB) - a bioplastic derived from agro-industrial residues. To overcome the challenges of molecular imprinting of macromolecules such as P3HB, this study employed methanolysis reaction to break down the P3HB biopolymer chains into methyl 3-hydroxybutyrate (M3HB) monomers. Thereafter, M3HB were employed as the target molecules in the construction of molecularly imprinted sensors. The electrochemical device was then prepared by electropolymerizing a molecularly imprinted poly (indole-3-acetic acid) thin film on a glassy carbon electrode surface modified with reduced graphene oxide (GCE/rGO-MIP) in the presence of M3HB. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), scanning electron microscopy with field emission gun (SEM-FEG), Raman spectroscopy, attenuated total reflection Fourier-transform infrared (ATR-FTIR) and X-ray Photoelectron Spectroscopy (XPS) were employed to characterize the electrode surface. Under ideal conditions, the MIP sensor exhibited a wide linear working range of 0.1 - 10 nM and a detection limit of 0.3 pM (n = 3). The sensor showed good repeatability, selectivity, and stability over time. For the sensor application, the bioproduction of P3HB was carried out in a bioreactor containing the Burkholderia glumae MA13 strain and sugarcane byproducts as a supplementary carbon source. The analyses were validated through recovery assays, yielding recovery values between 102 and 104%. These results indicate that this MIP sensor can present advantages in the monitoring of P3HB during the bioconversion process.

Sensitive and Rapid Detection of Aspartic Acid with Co3O4-ZnO Nanorods Using Differential Pulse Voltammetry

Herein, the detection of aspartic acid by doped Co₃O₄-ZnO nanorod materials was proposed using differential pulse voltammetry. The nano-composite metal oxide was synthesized by the wet precipitation method in basic media. Aspartic acid is a non-essential amino acid naturally synthesized in the body with lot of health significance, including as a biomarker for several health deficiencies. The synthesized composite Co₃O₄-ZnO nanorod was well-investigated by using FESEM, XRD, XPS, FTIR, UV/vis., EIS, and CV. The synthesized composite exhibited a low limit of detection (0.03 µM, high sensitivity (0.0014 µA µM^-1 cm^-2) and wide linear range (0.05-50 µM) for aspartic acid. The substrate, the Co₃O₄-ZnO nanorod, enhanced the electro-catalytic oxidation of aspartic acid as a result of its catalytic and conductivity properties. The developed sensor based on Co₃O₄-ZnO has a repeatable, reproducible and stable current response for aspartic acid. Additionally, other electroactive compounds did not interfere with the sensor's current response. The suitability of the developed sensor for real sample analysis was also established. Therefore, this study proposed the potential use of Co₃O₄-ZnO nanorod material in healthcare management for the maintenance of human well-being.

A review on carbon-based molecularly-imprinted polymers (CBMIP) for detection of hazardous pollutants in aqueous solutions

This article discusses the unique properties and performance of carbon-based molecularly-imprinted polymers (MIPs) for detecting hazardous pollutants in aqueous solutions. Although MIPs have several advantages such as specific recognition sites, selectivity, and stability, they suffer from a series of drawbacks, including loss of conductivity, electrocatalytic activity, and cost, which limit their use in various fields. Carbon-based MIPs, which utilize carbon electrodes, carbon nanoparticles, carbon dots, carbon nanotubes, and graphene substrates, have been the focus of research in recent years to enhance their properties and remove their weaknesses as much as possible. These carbon-based nanomaterials have excellent sensitivity and specificity for molecular identification. As a result, they have been widely used in various applications, such as assessing the environmental, biological, and food samples. This article examines the growth of carbon-based MIPs and their environmental applications.

Detection of L-Aspartic Acid with Ag-Doped ZnO Nanosheets Using Differential Pulse Voltammetry

Here, a sensitive voltametric electrochemical sensor probe was fabricated to reliably trace the detection of L-aspartic acid in phosphate-buffered medium using a glassy carbon electrode (GCE) layered with a film of wet-chemically prepared Ag2O-doped ZnO nanosheets (NSs). EDS, FESEM, XPS, and X-ray diffraction analyses were implemented as characterizing tools of prepared NSs to confirm the structural and compositional morphology, binding energies of existing atoms, and the crystallinity of synthesized NSs. The differential pulse voltammetry (DPV) was applied to the trace detection of L-aspartic acid, and exhibited a wide detection range of 15.0~105.0 µM, a limit of detection (3.5 ± 0.15 µM), and good sensitivity (0.2689 µA µM-1 cm-2). Besides these the precious reproducibility, stability, and efficient responses were perceived from the voltametric analysis of aspartic acid. Moreover, the proposed aspartic acid was subjected to experiments to potentially detect aspartic acid in real biological samples. Therefore, the development of an enzyme-free sensor by applying this method will be a smart technical approach in the near future.

Overoxidation of Intrinsically Conducting Polymers

Intrinsically conducting polymers may undergo significant changes of molecular structure and material properties when exposed to highly oxidizing conditions or very positive electrode potentials, commonly called overoxidation. The type and extent of the changes depend on the experimental conditions and chemical environment. They may proceed already at much lower rates at lower electrode potentials because some of the processes associated with overoxidation are closely related to more or less reversible redox processes employed in electrochemical energy conversion and electrochromism. These changes may be welcome for some applications of these polymers in sensors, extraction, and surface functionalization, but in many cases, the change of properties affects the performance of the material negatively, contributing to material and device degradation. This report presents published examples, experimental observations, and their interpretations in terms of both structural and of material property changes. Options to limit and suppress overoxidation are presented, and useful applications are described extensively.

Various Cd(ii) coordination polymers induced by carboxylates: multi-functional detection of Fe3+, anions, aspartic acids and bovine serum albumin

By adjusting carboxylates, six Cd(ii) coordination polymers based on a naphthalene-methylene mixed-bridged-amide ligand, [Cd(L)(DNBA)2] (1), [Cd2(L)2(BDC)2(H2O)2]·2H2O (2), [Cd(L)(1,4-CHDA)] (3), [Cd(L)(HIPA)(H2O)]·H2O (4), [Cd(L)(MIP)]·H2O (5), and [Cd(L)(PMA)0.5(H2O)]·H2O (6) [L = N,N'-bis(4-methylenepyridin-4-yl)-1,4-naphthalene dicarboxamide, HDNBA = 3,5-dinitrobenzoic acid, H2BDC = 1,4-benzenedicarboxylic acid, 1,4-H2CHDA = 1,4-cyclohexanedicarboxylic acid, H2HIPA = 5-hydroxyisophthalic acid, H2MIP = 5-methylisophthalic acid and H4PMA = pyromellitic acid] have been synthesized under hydrothermal conditions. 1 shows a 4-c sql coplanar structure. 2 exhibits a 2-fold vertical interpenetrating structure based on wave-like 4-c sql layers. 3 shows a (3,5)-c pnh network containing a unique μ3-L. 4 features a 4-c sql wave-like network. 5 and 6 exhibit 3D structures with 6-c pcu and 4-c mog topologies. The number of carboxyl groups and functional group positions of the carboxylates have an important influence on the structures of the title complexes. The fluorescent responses of 1-6 towards Fe3+, anions, aspartic acid and bovine serum albumin were investigated. Among them, 4 shows sensitivity and selectivity (KSV = 1.16 × 104 L mol-1 for Fe3+, 1.03 × 104 L mol-1 for CrO42-, 1.08 × 104 L mol-1 for Cr2O72-, 1.17 × 104 L mol-1 for MnO4- and 1.05 × 104 L mol-1 for aspartic acid).

Simultaneous detection of l-aspartic acid and glycine using wet-chemically prepared Fe3O4@ZnO nanoparticles: real sample analysis

An easy and reliable wet-chemical method was used to synthesize iron oxide doped zinc oxide nanoparticles (Fe₃O₄@ZnO NPs) at a low-temperature under alkaline medium.

Electrochemical Sensor Based on Molecularly Imprinted Polymer for the Detection of Cefalexin

In this study, a new electrochemical sensor was developed for the detection of cefalexin (CFX), based on the use of a molecularly imprinted polymer (MIP) obtained by electro‒polymerization in an aqueous medium of indole-3-acetic acid (I3AA) on a glassy carbon electrode (GCE) and on boron-doped diamond electrode (BDDE). The two different electrodes were used in order to assess how their structural differences and the difference in the potential applied during electrogeneration of the MIP translate to the performances of the MIP sensor. The quantification of CFX was performed by using the electrochemical signal of a redox probe before and after the rebinding of the template. The modified electrode was characterized using atomic force microscopy (AFM), scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The influence of different parameters on the fabrication of the sensor was tested, and the optimized method presented high selectivity and sensitivity. The MIP-based electrode presented a linear response for CFX concentration range of 10 to 1000 nM, and a limit of detection of 3.2 nM and 4.9 nM was obtained for the BDDE and the GCE, respectively. The activity of the sensor was successfully tested in the presence of some other cephalosporins and of other pharmaceutical compounds. The developed method was successfully applied to the detection of cefalexin from real environmental and pharmaceutical samples.

Conducting polymer-based electrochemical biosensors for neurotransmitters: A review

Neurotransmitters are important biochemical molecules that control behavioral and physiological functions in central and peripheral nervous system. Therefore, the analysis of neurotransmitters in biological samples has a great clinical and pharmaceutical importance. To date, various methods have been developed for their assay. Of the various methods, the electrochemical sensors demonstrated the potential of being robust, selective, sensitive, and real time measurements. Recently, conducting polymers (CPs) and their composites have been widely employed in the fabrication of various electrochemical sensors for the determination of neurotransmitters. Hence, this review presents a brief introduction to the electrochemical biosensors, with the detailed discussion on recent trends in the development and applications of electrochemical neurotransmitter sensors based on CPs and their composites. The review covers the sensing principle of prime neurotransmitters, including glutamate, aspartate, tyrosine, epinephrine, norepinephrine, dopamine, serotonin, histamine, choline, acetylcholine, nitrogen monoxide, and hydrogen sulfide. In addition, the combination with other analytical techniques was also highlighted. Detection challenges and future prospective of the neurotransmitter sensors were discussed for the development of biomedical and healthcare applications.

Pencil Graphite Electrodes: A Versatile Tool in Electroanalysis

Due to their electrochemical and economical characteristics, pencil graphite electrodes (PGEs) gained in recent years a large applicability to the analysis of various types of inorganic and organic compounds from very different matrices. The electrode material of this type of working electrodes is constituted by the well-known and easy commercially available graphite pencil leads. Thus, PGEs are cheap and user-friendly and can be employed as disposable electrodes avoiding the time-consuming step of solid electrodes surface cleaning between measurements. When compared to other working electrodes PGEs present lower background currents, higher sensitivity, good reproducibility, and an adjustable electroactive surface area, permitting the analysis of low concentrations and small sample volumes without any deposition/preconcentration step. Therefore, this paper presents a detailed overview of the PGEs characteristics, designs and applications of bare, and electrochemically pretreated and chemically modified PGEs along with the corresponding performance characteristics like linear range and detection limit. Techniques used for bare or modified PGEs surface characterization are also reviewed.

Development of molecularly imprinted polymer nanoarrays of N-acryloyl-2-mercaptobenzamide on a silver electrode for ultratrace sensing of uracil and 5-fluorouracil

Graphical representation of development of mip-nanoarrays.

A molecularly imprinted electrochemical enzymeless sensor based on functionalized gold nanoparticle decorated carbon nanotubes for methyl-parathion detection

Schematic of MP MIP sensor and the possible mechanism.