A sensor based on graphitic mesoporous carbon/ionic liquids composite film for simultaneous determination of hydroquinone and catechol

Simultaneous determination of dihydroxybenzene isomers in cosmetics by synthesis of nitrogen-doped nickel carbide spheres and construction of ultrasensitive electrochemical sensor

N-doped nickel carbide spheres (N-NiCSs) were synthesised for the first time by controlling the type of surfactant, surfactant-to-Ni molar ratio, reaction temperature, and reaction time. The morphology, composition, and electrochemical behaviour of the synthesised spheres revealed that the spheres presented a large specific surface area, abundant pores, and good conductivity, with excellent electrocatalytic performance. A glassy carbon electrode-modified with N-NiCSs was used for the simultaneous identification of hydroquinone (HQ), catechol (CC), and resorcinol (RS) utilising differential pulse voltammetry. The oxidation peaks of HQ, CC, and RS were observed at 9.8, 119, and 470 mV, respectively (vs. SCE). Under optimal conditions, the oxidation peak currents of HQ, CC, and RS were linear in the concentration ranges of 0.005-100 μM, 0.05-200 μM, and 5-500 μM, respectively. The detection limits of HQ, CC, and RS were 0.00152 μM, 0.015 μM, and 0.24 μM (S/N = 3), respectively. The sensitivities of HQ, CC, and RS were 4.635, 2.069, and 0.985 μA μM^-1 cm^-2 (S/N = 3), respectively. The fabricated sensor was successfully used to detect HQ, CC, and RS in hair dye, whitening cream, and local tap water samples. Moreover, the sensor presented a good repeatability, reproducibility, and stability during cosmetic testing and a relatively wide linear range, an ultralow detection limit, and an ultrahigh sensitivity.

Electrochemical sensor based on N-doped carbon dots decorated with manganese oxide nanospheres for simultaneous detection of p-aminophenol and paracetamol

Nitrogen doped carbon dots were synthesized using the hydrothermal reaction of cellulose and urea, and then carbonized in a N2 atmosphere at a high temperature to prepare N-doped carbon dots decorated with manganese oxide nanospheres (N-CMOS) formed using cetyltrimethylammonium bromide (CTAB) and MnO. The introduction of N-CMOS resulted in a large specific surface area, abundant pores, favourable conductivity and an excellent electrocatalytic performance. A glassy carbon electrode modified with N-CMOS was used for the simultaneous identification of paracetamol (AP) and p-aminophenol (PAP) utilising differential pulse voltammetry. Under optimum conditions, the electrical sensor showed a wide linear range of 0.1-100 μM for PAP and 0.1-80 μM for AP, with detection limits of 0.0456 and 0.0303 μM (S/N = 3), respectively. The sensitivities for detecting PAP and AP were calculated as 1.615 and 1.971 μA μM-1 cm-2, respectively. The sensitivity and limit of detection (LOD) meet the requirements of detection of drug impurity limits in tablets. In addition, the sensor has been successfully applied to detect PAP and AP in paracetamol tablets. The constructed sensor not only possesses a superior repeatability, reproducibility and stability, but a relatively wide linear range, and a superior detection limit and sensitivity.

Ultrasensitive voltammetric detection of benzenediol isomers using reduced graphene oxide-azo dye decorated with gold nanoparticles

The detection of phenolic compounds, i.e. resorcinol (RC) catechol (CC) and hydroquinone (HQ) are important due to their extremely hazardous impact and poor environmental degradation. In this work, a novel and sensitive composite of electrochemically reduced graphene oxide-poly(Procion Red MX-5B)/gold nanoparticles modified glassy carbon electrode (GCE/ERGO-poly(PR)/AuNPs) was assembled for voltammetric detection of benzenediol isomers (RC, CC, and HQ). The nanocomposite displayed high peak currents towards the oxidation of RC, HQ, and CC compared to non-modified GCE. The peak-to-peak separations were 0.44 and 0.10 V for RC-CC and CC-HQ, respectively. The limit of detections were 53, 53, and 79 nM for HQ, CC, and RC with sensitivities of 4.61, 4.38, and 0.56 μA/μM (S/N = 3), respectively. The nanocomposite displayed adequate reproducibility, besides good stability and acceptable recoveries for wastewater and cosmetic samples analyses.

The Electrochemical Oxidation of Hydroquinone and Catechol through a Novel Poly-geminal Dicationic Ionic Liquid (PGDIL)-TiO2 Composite Film Electrode

A novel poly-geminal dicationic ionic liquid (PGDIL)-TiO₂/Au composite film electrode was successfully prepared by electrochemical polymerization of 1,4-bis(3-(m-aminobenzyl)imidazol-1-yl)butane bis(hexafluorinephosphate) containing polymerizable anilino groups in the electrolyte containing nano-TiO₂. The basic properties of PGDIL-TiO₂/Au composite films were studied by SEM, cyclic voltammetry, electrochemical impedance spectroscopy, and differential pulse voltammetry. The SEM results revealed that the PGDIL-TiO₂ powder has a more uniform and smaller particle size than the PGDIL. The cyclic voltammetry results showed that the catalytic effect on electrochemical oxidation of hydroquinone and catechol of the PGDIL-TiO₂ electrode is the best, yet the R_ct of PGDIL-TiO₂ electrode is higher than that of PGDIL and TiO₂ electrode, which is caused by the synergistic effect between TiO₂ and PGDIL. The PGDIL-TiO₂/Au composite electrode presents a good enhancement effect on the reversible electrochemical oxidation of hydroquinone and catechol, and differential pulse voltammetry tests of the hydroquinone and catechol in a certain concentration range revealed that the PGDIL-TiO₂/Au electrode enables a high sensitivity to the differentiation and detection of hydroquinone and catechol. Furthermore, the electrochemical catalytic mechanism of the PGDIL-TiO₂/Au electrode was studied. It was found that the recombination of TiO₂ improved the reversibility and activity of the PGDIL-TiO₂/Au electrode for the electrocatalytic reaction of HQ and CC. The PGDIL-TiO₂/Au electrode is also expected to be used for catalytic oxidation and detection of other organic pollutants containing -OH groups.

Voltammetric determination of catechol and hydroquinone at poly(murexide) modified glassy carbon electrode

The electrochemical study of Catechol (CC) was studied in presence of Hydroquinone (HQ) using poly(murexide) modified glassy carbon electrode (MGCE) by cyclic voltammetric study. The modified electrode exhibited good affirmative response towards the electro chemical oxidation of CC in presence of HQ in 0.2 M phosphate buffer solution at the physiological of pH 7.4. The influence of scan rate, concentration and pH parameters were examined with the cyclic voltammetric method. The modified electrode showed good selectivity and sensitivity with an advantage of interference study and free determination of selected analytes in this experiment. Finally a simple, sensitive and selective method was developed for the determination of dihydroxybenzene isomeric compounds.

MOF/PAN nanofiber-derived N-doped porous carbon materials with excellent electrochemical activity for the simultaneous determination of catechol and hydroquinone

In this work, the obtained C-ZIF-67/PAN via one-step pyrolysis of hybrid ZIF-67/PAN nanofibers were used to fabricate electrochemical sensor for the determination of benzenediol isomer.

Recent Trends on Electrochemical Sensors Based on Ordered Mesoporous Carbon

The past decade has seen an increasing number of extensive studies devoted to the exploitation of ordered mesoporous carbon (OMC) materials in electrochemistry, notably in the fields of energy and sensing. The present review summarizes the recent achievements made in field of electroanalysis using electrodes modified with such nanomaterials. On the basis of comprehensive tables, the interest in OMC for designing electrochemical sensors is illustrated through the various applications developed to date. They include voltammetric detection after preconcentration, electrocatalysis (intrinsically due to OMC or based on suitable catalysts deposited onto OMC), electrochemical biosensors, as well as electrochemiluminescence and potentiometric sensors.

One pot electrochemical synthesis of poly(melamine) entrapped gold nanoparticles composite for sensitive and low level detection of catechol

A simple and cost effective synthesis of nanomaterials with advanced physical and chemical properties have received much attention to the researchers, and is of interest to the researchers from different disciplines. In the present work, we report a simple and one pot electrochemical synthesis of poly(melamine) entrapped gold nanoparticles (PM-AuNPs) composite. The PM-AuNPs composite was prepared by a single step electrochemical method, wherein the AuNPs and PM were simultaneously fabricated on the electrode surface. The as-prepared materials were characterized by various physicochemical methods. The PM-AuNPs composite modified electrode was used as an electrocatalyst for oxidation of catechol (CC) due to its well-defined redox behavior and enhanced electro-oxidation ability towards CC than other modified electrodes. Under optimized conditions, the differential pulse voltammetry (DPV) was used for the determination of CC. The DPV response of CC was linear over the concentration ranging from 0.5 to 175.5μM with a detection limit of 0.011μM. The PM-AuNPs composite modified electrode exhibits the high selectivity in the presence of range of potentially interfering compounds including dihydroxybenzene isomers. The sensor shows excellent practicality in CC containing water samples, which reveals the potential ability of PM-AuNPs composite modified electrode towards the determination of CC in real samples.

Mesoporous carbons: recent advances in synthesis and typical applications

Mesoporous carbon materials have been extensively studied because of their vast potential applications ranging from separation and adsorption, catalysis, and electrochemistry to energy storage.