Development of magnetic single-enzyme nanoparticles as electrochemical sensor for glucose determination

Optimization of Nanohybrid Biosensors Based on Electro-Crosslinked Tannic Acid Capped Nanoparticles/Enzyme

Enzymes/Nanoparticles (NPs) bioconjugates are massively used nowadays to develop thin films for optical and electrochemical biosensors. Nevertheless, their full characterization as a thin coating onto electrodes remains little discussed, in particular the influence of NPs size and enzyme/NPs ratio used in the electrodeposition solution. In this study, GOx (160 kDa) and HRP (44 kDa) were used in association with tannic acid capped gold NPs (a series with sizes from 7 to 40 nm) to electrodeposit biosensor coatings, sensitive towards glucose and H2O2, respectively. The electrodeposition process was based on a mussel-inspired electro-crosslinking between gallol moieties of tannic acid (at the surface of NPs) and amine moieties of the enzymes. On one hand, the sensitivity of the GOx/NPs coatings depends strongly on the NP size and the enzyme/NPs molar ratio of the electrodeposition solution. An optimal sensitivity was obtained by electrodeposition of 11 nm NPs at a GOx/NPs molar ratio close to the theoretical value of the enzyme monolayer. On the other hand, a modest influence of the NPs size was found on the sensitivity in the case of the electrodeposited HRP/NPs coatings, reaching a plateau at the HRP/NPs molar ratio close to the value of the theoretical enzyme monolayer. In both cases, the enzyme/NPs molar ratio played a role in the sensitivity. To fully understand the parameters driving the biosensor sensitivity, a comprehensive evaluation of the colloidal state of the bioconjugates is proposed here.

Bio-fabrication of thermozyme-based nano-biosensors: their components and present scenario

An amalgamation of microbiology, biocatalysis, recombinant molecular biology, and nanotechnology is crucial for groundbreaking innovation in developing nano-biomedicines and sensoristics. Enzyme-based nano-biosensor finds prospective applications in various sectors (environmental, pharmaceutical, food, biorefineries). These applications demand reliable catalytic efficiency and functionality of the enzyme under an extreme operational environment for a prolonged period. Over the last few years, bio-fabrication of nano-biosensors in conjunction with thermozymes from thermophilic microbes is being sought after as a viable design. Thermozymes are known for their robustness, are chemically resistant toward organic solvents, possess higher durability for constant use, catalytic ability, and stability at elevated temperatures. Additionally, several other attributes of thermozymes like substrate specificity, selectivity, and sensitivity make them desirable in developing a customized biosensor. In this review, crucial designing aspects of enzyme-based nano-biosensors like enzyme immobilization on an electrode surface, new materials derived from microbial sources (biopolymers based nanocomposites), improvisation measures for sensitivity, and selectivity have been addressed. It also covers microbial biosynthesis of nanomaterials used to develop sensoristic devices and its numerous applications such as wastewater treatment, biorefineries, and diagnostics. The knowledge will pave the way toward creating consistent eco-friendly, economically viable nanostructured-based technologies with broad applicability and exploitation for industrial use in the near future.

Recent progress in nanomaterial-based electrochemical biosensors for pathogenic bacteria

This review (with 118 refs.) discusses the progress made in electroanalytical methods based on the use of organic and inorganic nanomaterials for the determination of bacteria, specifically of E. coli, Salmonella, Staphylococcus, Mycobacterium, Listeria and Klebsiella species. We also discuss advantages and limitations of electrochemical methods. Strategies based on the use of aptamers, DNA and antibodies are covered. Following an introduction into electrochemical biosensing, a first large section covers methods for pathogen detection using metal nanoparticles, with subsections on silver nanoparticles, gold nanoparticles, magnetic nanoparticles and carbon-based nanomaterials. A second large section covers methods based on the use of organic nanocomposites, graphene and its derivatives. Other nanoparticles are treated in a final section. Several tables are presented that give an overview on the wealth of methods and materials. A concluding section summarizes the current status, addresses challenges, and gives an outlook on potential future trends. Graphical abstract This review demonstrates the progress made in electroanalytical methods based on the use of organic and inorganic nanomaterials for the detection and determination of pathogenic bacteria. We also discuss advantages and limitations of electrochemical methods. Strategies based on the use of aptamers, DNA and antibodies are covered.

Magnetically induced enzymatic cascades - advancing towards multi-fuel direct/mediated bioelectrocatalysis

A generic method to magnetically assemble enzymatic cascades on electrode surfaces is introduced. The versatile method enables the simultaneous activation of both direct and mediated electron transfer bioelectrocatalysis to harness different substrates, which can serve as multiple fuels and oxidizers in biofuel cells generating clean energy.

Enzymatic characterisation of the immobilised Alcalase to hydrolyse egg white protein for potential allergenicity reduction

BACKGROUND

This study examined technique characteristics of the immobilised Alcalase to hydrolyse egg white protein for potential allergenicity reduction. Alcalase was immobilised covalently on carboxyl-functionalised magnetic beads by carbodiimide activation. The technique characteristics of the immobilised Alcalase were investigated, followed by determining the degrees of hydrolysis (DH), immunoglobulin G (IgG) binding, and IgE binding of the digested egg white protein by immobilised Alcalase.

RESULTS

Enzymatic activity, enzyme loading, and immobilisation yield of the prepared immobilised Alcalase were 20.55 U mg^-1 , 925 mg g^-1 , and 45%, respectively. Immobilised Alcalase showed maximum activity at pH 8.0 and 60 °C. Compared with free Alcalase, immobilised Alcalase exhibited better thermal and storage stability. Moreover, immobilised Alcalase can be reused 10 times and still maintained 55% of its initial activity. Partial hydrolysis of egg white protein by immobilised Alcalase can effectively reduce IgG and IgE binding of the hydrolysates.

CONCLUSION

This study indicates that the immobilised Alcalase can be used to hydrolyse continuously egg white protein for potential allergenicity reduction. © 2016 Society of Chemical Industry.

Microextraction with phases containing nanoparticles

In this article, the state of the art of microextraction techniques that involve nanoparticles or nanomaterials (NPs) is reviewed, with special emphasis on the applications described in the biomedical field. The uses and advantages of the different types of NPs such as carbon nanotubes (either single- and multi-walled) and other carbon-based materials, metallic NPs, including gold, silver and magnetic NPs, and silica NPs are summarized. The main strategies used to modify the selectivity, extractive capacity and/or the stability of NPs through a chemical reaction are also reviewed. The potential advantages of NPs in different forms of off-line and on-line microextraction are discussed, and illustrative examples of application in the biomedical field are shown.

Biomedical Probes Based on Inorganic Nanoparticles for Electrochemical and Optical Spectroscopy Applications

Inorganic nanoparticles usually provide novel and unique physical properties as their size approaches nanometer scale dimensions. The unique physical and optical properties of nanoparticles may lead to applications in a variety of areas, including biomedical detection. Therefore, current research is now increasingly focused on the use of the high surface-to-volume ratios of nanoparticles to fabricate superb chemical- or biosensors for various detection applications. This article highlights various kinds of inorganic nanoparticles, including metal nanoparticles, magnetic nanoparticles, nanocomposites, and semiconductor nanoparticles that can be perceived as useful materials for biomedical probes and points to the outstanding results arising from their use in such probes. The progress in the use of inorganic nanoparticle-based electrochemical, colorimetric and spectrophotometric detection in recent applications, especially bioanalysis, and the main functions of inorganic nanoparticles in detection are reviewed. The article begins with a conceptual discussion of nanoparticles according to types, followed by numerous applications to analytes including biomolecules, disease markers, and pharmaceutical substances. Most of the references cited herein, dating from 2010 to 2015, generally mention one or more of the following characteristics: a low detection limit, good signal amplification and simultaneous detection capabilities.