Electrochemical and spectrophotometric characterisation of protein kinase inhibitor and anticancer drug danusertib

Optimizing Ni-Cr patterned boron-doped diamond band electrodes: Doping effects on electrochemical efficiency and posaconazole sensing performance

There is growing interest in developing diamond electrodes with defined geometries such as, for example, micrometer-sized electrode arrays to acquire signals for electroanalysis. For electroanalytical sensing applications, it is essential to achieve precise conductive patterns on the insulating surface. This work provides a novel approach to boron-doped diamond patterning using nichrome masking for selective seeding on an oxidized silicon substrate. The optimized process involves nichrome deposition, sonication, chemical etching, seeding, and tailored chemical vapor deposition of boron-doped diamond with an intrinsic layer to suppress boron diffusion. Through a systematic investigation, it was determined that isolated boron-doped diamond band electrodes can be efficiently produced on non-conductive silica. Additionally, the influence of boron doping on electrochemical performance was studied, with higher doping enhancing the electrochemical response of band electrodes. To demonstrate sensing capabilities, boron-doped diamond bands were used to detect posaconazole, an antifungal drug, exploiting its electroactive behaviour. A linear correlation between posaconazole concentration and oxidation peak current was observed over 1.43 × 10-8 - 5.71 × 10-6 M with a 1.4 × 10-8 M detection limit. The developed boron-doped diamond microbands could significantly impact the field of electroanalysis, facilitating detection of diverse biologically relevant molecules. Overall, this diamond patterning approach overcomes major challenges towards all-diamond electrochemical sensor chips.

Electrochemical sensor for simultaneous determination of trifluoperazine and dopamine in human serum based on graphene oxide-carbon nanotubes/iron-nickel nanoparticles

Trifluoperazine (TFLP) is an important psychiatric medication that balances the dopamine (DA) level in the brain for patients suffering from neurological disorder diseases. An efficient electrochemical sensor is developed for detecting TFLP in real human serum samples. The sensor is fabricated by casting the GC surface with two consecutive thin layers, namely a graphene oxide-carbon nanotubes mixture (GRO-CNT), and iron-nickel nanoparticles (Fe-Ni). The diffusion-controlled oxidation process of TFLP at the composite surface includes one electron transfer process. Under optimized conditions, the sensor in human serum shows excellent catalytic effect for simultaneous determination of TFLP and dopamine (DA) in the same concentration range (0.5 μM to 18 μM) with low detection limits of 0.13 μM and 0.32 μM respectively. The combined effect of a large conductive surface area and the excellent catalytic activity of the nanocomposite improves the sensor's performance. The sensor exhibits a stable current response over four weeks, excellent reproducibility, and insignificant interference from common species present in human serum samples. The reliability test of using the sensor in serum samples shows good recovery of TFLP.

Electrochemical, spectroscopic, and molecular docking studies of the interaction between the anti-retroviral drug indinavir and dsDNA

In this study, an electrochemical DNA biosensor was developed using a straightforward methodology to investigate the interaction of indinavir with calf thymus double-stranded deoxyribonucleic acid (ct-dsDNA) for the first time. The decrease in the oxidation signals of deoxyguanosine (dGuo) and deoxyadenosine (dAdo), measured by differential pulse voltammetry, upon incubation with different concentrations of indinavir can be attributed to the binding mode of indinavir to ct-dsDNA. The currents of the dGuo and dAdo peaks decreased linearly with the concentration of indinavir in the range of 1.0–10.0 μg/mL. The limit of detection and limit of quantification for indinavir were 0.29 and 0.98 μg/mL, respectively, based on the dGuo signal, and 0.23 and 0.78 μg/mL, respectively, based on the dAdo signal. To gain further insights into the interaction mechanism between indinavir and ct-dsDNA, spectroscopic measurements and molecular docking simulations were performed. The binding constant (K_b) between indinavir and ct-dsDNA was calculated to be 1.64 × 10⁸ M⁻¹, based on spectrofluorometric measurements. The obtained results can offer insights into the inhibitory activity of indinavir, which could help to broaden its applications. That is, indinavir can be used to inhibit other mechanisms and/or hallmarks of viral diseases.

•

Electrochemical DNA biosensor was fabricated for indinavir-DNA interaction study.

•

Indinavir was interacted with ct-dsDNA and made eight hydrogen bonds.

•

The Kb was calculated to be 1.64 × 10⁸ M⁻¹ by spectrofluorometry.

The Use of Boron-Doped Diamond Electrode for the Determination of Selected Biocides in Water Samples

In recent years, the remains of chemical substances in water environments, referred to as emerging organic contaminations, have been more and more often studied by analysts. This work shows the possibility of using a boron-doped diamond electrode to determine low concentration levels of remains of pharmaceuticals in environmental samples. The study focused on selected biocides from the group of azole fungicides (itraconazole and posaconazole) and was performed using quick and sensitive electrochemical methods. The cyclic voltammetry method was used in order to determine the properties of these compounds, whereas analytical characterization was performed using square wave voltammetry. The work involved the specification of the optimum electrooxidation conditions of the selected fungicides, their comparative characterization, and the development of a new, sensitive methods of itraconazole and posaconazole assay. The proposed procedures allowed us to determine itraconazole in the range from 7.9 × 10−8 to 1.2 × 10−6 moL·L−1 and posaconazole in the range from 5.7 × 10−8 to 8.44 × 10−7 moL·L−1. The relative standard deviation of the measurements did not exceed 5.85%. The developed procedures were successfully used to determine itraconazole and posaconazole concentration in water samples and the assay recovery was between 93.5% and 102.8%.

In situ electrochemical evaluation of dsDNA interaction with the anticancer drug danusertib nitrenium radical product using the DNA-electrochemical biosensor

Danusertib is a kinase inhibitor and anti-cancer drug. The evaluation of the interaction between danusertib and dsDNA was investigated in bulk solution and using the dsDNA-electrochemical biosensor. The dsDNA-danusertib interaction occurs in two sequential steps. First, danusertib binds electrostatically todsDNA phosphate backbone through the positively charged piperazine moiety. The second step involved the pyrrolo-pyrazolemoiety and led to small morphological modifications in the dsDNA double helix which were electrochemically characterised through the changes of guanine and adenine residue oxidation peaks and confirmed by electrophoretic and spectrophotometric measurements. The nitrenium cation radical product of danusertib amino group oxidation was electrochemically generated in situ on the dsDNA-electrochemical biosensor surface. The danusertib nitrenium cation radical redox metabolite was covalently attached to the C8 of guanine residues preventing their oxidation. An interaction mechanism of dsDNA-danusertib is proposed and the formation of the danusertib redox nitrenium radical metabolite-guanine adduct explained.

Voltammetric determination of an antipsychotic agent trifluoperazine at a boron-doped diamond electrode in human urine

Differential pulse voltammetric determination of antipsychotic drug trifluoperazine on boron-doped diamond electrode.