A silica co-electrodeposition route to nanoporous Co3O4 film electrode for oxygen evolution reaction

Identification of Suitable Mesh Size of Commercial Stainless-Steel for Electrochemical Oxygen Evolution Reaction

The study examines the oxygen evolution reaction (OER) electrocatalytic efficiency of various stainless-steel mesh (SSM) sizes in electrolytic cells. Stainless steel is chosen due to its widespread availability and stability, making it an economically viable option. The primary objective of this investigation is to determine the optimal stainless-steel mesh size among those currently widely available on the market. The classification of stainless-steel mesh sizes as SS304 is confirmed by the minimal compositional variations observed across all mesh sizes through electron dispersive X-ray (EDX) spectra and X-ray fluorescence (XRF) analyses. Remarkably, CV experiments carried out at different scan rates indicate that SSM 200 has the maximum specific electrochemical surface area (ECSA). As a result, SSM 200 demonstrates superior performance in terms of current density response and shows the lowest overpotential in the alkaline medium compared to other stainless-steel mesh sizes. Furthermore, the SSM 200 exhibits a low overpotential of 337 mV at a current density of 10 mA/cm2 and a Tafel slope of 62.2 mV/decade, surpassing the performance of several previously reported electrodes for the OER. Stability tests conducted under constant voltage further confirm the remarkable stability of SSM 200, making it an ideal anode for electrolytic cell applications. These findings emphasize the cost-effectiveness and high stability of SSM 200, presenting intriguing possibilities for future research and advancements in this field.

An enzyme-free electrochemiluminescence insulin probe based on the regular attachment of ZnO nanoparticles on a 3-D nickel foam and H2O2 as an efficient co-reactant

In this study, a highly sensitive, fast, and enzyme-free electrochemiluminescence (ECL) probe based on the decoration of zinc oxide nanoparticles on nickel foam is proposed for insulin determination. A silica film was employed as a size adjusting agent for the modification of the nickel foam surface with ZnO nanoparticles (ZnO NPs). The ECL of the ZnO NP/Ni foam was investigated in a natural medium in the presence of hydrogen peroxide (H₂O₂) as an efficient co-reactant. With increasing insulin concentration, a remarkable improvement in ECL signal was observed, which proved the enhancing effect of insulin on the ECL emission. The characterization of the ZnO-NP/Ni-foam electrode was performed via electrochemical impedance spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurement, X-ray diffraction, field emission scanning electron microscopy (FESEM), and energy-dispersive X-ray analysis techniques. The fabricated electrode was applied for the trace analysis of insulin using the ultrasensitive ECL method in a phosphate buffer solution. Under the optimal conditions, the results showed excellent performance during insulin determination with a wide linear range of 3.57 × 10^-15 M to 2.94 × 10^-9 M, a low detection limit of 1.00 × 10^-16 M, and a relative standard deviation of 1.03%. The proposed ECL sensor with excellent reproducibility, long-term stability, and high selectivity was used for insulin determination in real serum samples with acceptable outcomes.

The Influence of the Electrodeposition Parameters on the Properties of Mn-Co-Based Nanofilms as Anode Materials for Alkaline Electrolysers

In this work, the influence of the synthesis conditions on the structure, morphology, and electrocatalytic performance for the oxygen evolution reaction (OER) of Mn-Co-based films is studied. For this purpose, Mn-Co nanofilm is electrochemically synthesised in a one-step process on nickel foam in the presence of metal nitrates without any additives. The possible mechanism of the synthesis is proposed. The morphology and structure of the catalysts are studied by various techniques including scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. The analyses show that the as-deposited catalysts consist mainly of oxides/hydroxides and/or (oxy)hydroxides based on Mn²⁺, Co²⁺, and Co³⁺. The alkaline post-treatment of the film results in the formation of Mn-Co (oxy)hydroxides and crystalline Co(OH)₂ with a β-phase hexagonal platelet-like shape structure, indicating a layered double hydroxide structure, desirable for the OER. Electrochemical studies show that the catalytic performance of Mn-Co was dependent on the concentration of Mn versus Co in the synthesis solution and on the deposition charge. The optimised Mn-Co/Ni foam is characterised by a specific surface area of 10.5 m²·g⁻¹, a pore volume of 0.0042 cm³·g⁻¹, and high electrochemical stability with an overpotential deviation around 330–340 mV at 10 mA·cm⁻²_geo for 70 h.

Electrodeposition of (hydro)oxides for an oxygen evolution electrode

Electrochemical water splitting is a promising technology for hydrogen production and sustainable energy conversion, but the electrolyzers that are currently available do not have anodic electrodes that are robust enough and highly active for the oxygen evolution reaction (OER). Electrodeposition provides a feasible route for preparing freestanding OER electrodes with high active site utilization, fast mass transport and a simple fabrication process, which is highly attractive from both academic and commercial points of view. This minireview focuses on the recent electrodeposition strategies for metal (hydro)oxide design and water oxidation applications. First, the intrinsic advantages of electrodeposition in comparison with traditional technologies are introduced. Then, the unique properties and underlying principles of electrodeposited metal (hydro)oxides in the OER are unveiled. In parallel, illustrative examples of the latest advances in materials structural design, controllable synthesis, and mechanism understanding through the electrochemical synthesis of (hydro)oxides are presented. Finally, the latest representative OER mechanism and electrodeposition routes for OER catalysts are briefly overviewed. Such observations provide new insights into freestanding (hydro)oxides electrodes prepared via electrodeposition, which show significant practical application potential in water splitting devices. We hope that this review will provide inspiration for researchers and stimulate the development of water splitting technology.

A Highly Active CoFe Layered Double Hydroxide for Water Splitting

Highly active, cost-effective, and durable catalysts for oxygen evolution reaction (OER) are required in energy conversion and storage processes. A facile synthesis of CoFe layered double hydroxide (CoFe LDH) is reported as a highly active and stable oxygen evolution catalyst. By varying the concentration of the metal ion precursor, the Co/Fe ratios of LDH products can be tuned from 0.5 to 7.4. The structure and electrocatalytic activity of the obtained catalysts were found to show a strong dependence on the Co/Fe ratios. The Co₂ Fe₁ LDH sample exhibited the best electrocatalytic performance for OER with an onset potential of 1.52 V (vs. the reversible hydrogen electrode, RHE) and a Tafel slope of 83 mV dec^-1 . The Co₂ Fe₁ LDH was further loaded onto a Ni foam (NF) substrate to form a 3D porous architecture electrode, offering a long-term current density of 100 mA cm^-2 at 1.65 V (vs. RHE) towards the OER.

Simple Chemical Solution Deposition of Co₃O₄ Thin Film Electrocatalyst for Oxygen Evolution Reaction

Oxygen evolution reaction (OER) is the key reaction in electrochemical processes, such as water splitting, metal-air batteries, and solar fuel production. Herein, we developed a facile chemical solution deposition method to prepare a highly active Co3O4 thin film electrode for OER, showing a low overpotential of 377 mV at 10 mA/cm(2) with good stability. An optimal loading of ethyl cellulose additive in a precursor solution was found to be essential for the morphology control and thus its electrocatalytic activity. Our results also show that the distribution of Co3O4 nanoparticle catalysts on the substrate is crucial in enhancing the inherent OER catalytic performance.

Application of cobalt oxide nanostructured modified aluminium electrode for electrocatalytic oxidation of guanine and single-strand DNA

The electrocatalytic oxidation of guanine in ssDNA at cobalt oxide nanoflower-modified aluminium electrode.