Tin oxide - mesoporous carbon composites as platinum catalyst supports for ethanol oxidation and oxygen reduction

Ordered SnO2@C Flake Array as Catalyst Support for Improved Electrocatalytic Activity and Cathode Durability in PEMFCs

Pt-SnO2@C-ordered flake array was developed on carbon paper (CP) as an integrated cathode for proton exchange membrane fuel cell through a facile hydrothermal method. In the integrated cathode, Pt nanoparticles were deposited uniformly with a small particle size on the SnO2@C/CP support. Electrochemical impedance spectroscopy analysis revealed lower impedance in a potential range of 0.3-0.5 V for the ordered electrode structure. An electrochemically active surface area and oxygen reduction peak potential determined by cyclic voltammetry measurement verified the synergistic effect between Pt and SnO2, which enhanced the electrochemical catalytic activity. Besides, compared with the commercial carbon-supported Pt catalyst, the as-developed SnO2@C/CP-supported Pt catalyst demonstrated better stability, most likely due to the positive interaction between SnO2 and the carbon coating layer.

Ionic-liquid-modified CMK-3 as a support for the immobilization of molybdate ions (MoO42-): Heterogeneous nanocatalyst for selective oxidation of sulfides and benzylic alcohols

A nanometric carbon CMK-3 modified with octylimidazolium ionic liquid and MoO₄^2- as a new hybrid catalyst was synthesized. The study is the first to report a successful immobilization of MoO₄⁼ on the CMK-3/OctIm as a hybrid nanocatalyst. A variety of analytical methods were utilized to determine the properties of the structure and morphology of the synthesized nanocatalyst [CMK-3/Im/MoO₄^2-]. The analytical techniques were transmission electron microscopy (TEM), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), inductively coupled plasma (ICP), X-ray diffraction (XRD), N₂ isotherms (BET), IR spectroscopy and thermogravimetric analysis (TGA). CMK-3/OctIm/MoO₄^2- hybrid catalyst demonstrated a considerable catalytic activity. It is a recyclable nanocatalyst that is utilized to chemoselectively oxidize different types of sulfides to the corresponding sulfoxides and benzylic alcohols to aldehydes using the green oxidant, hydrogen peroxide (H₂O₂) in high-yields. With a little leaching and variation in activity, it is possible to recover and reuse the catalyst frequently. A combination of molybdate anion and the CMK-3 order mesoporous carbon resulted in an improvement in the performance of catalysis and ease of separation for the reaction procedure.

Photocatalytic degradation of ibuprofen using modified titanium oxide supported on CMK-3: effect of Ti content on the TiO2 and carbon interaction

TiO₂ nanoparticles dispersed in ordered mesoporous CMK-3 carbon with different Ti contents were successfully synthesized and their activity in the photocatalytic degradation of ibuprofen was presented.

On the Influence of Composition and Structure of Carbon-Supported Pt-SnO2 Hetero-Clusters onto Their Electrocatalytic Activity and Durability in PEMFC

A detailed study of the structure, morphology and electrochemical properties of Pt/C and Pt/x-SnO2/C catalysts synthesized using a polyol method has been provided. A series of catalysts supported on the SnO2-modified carbon was synthesized and studied by various methods including transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), electrochemical methods, and fuel cell testing. The SnO2 content varies from 5 to 40 wt %. The TEM images, XRD and XPS analysis suggested the Pt-SnO2 hetero-clusters formation. The SnO2 content of ca. 10% ensures an optimal catalytic layer structure and morphology providing uniform distribution of Pt-SnO2 clusters over the carbon support surface. Pt/10wt %-SnO2/C catalyst demonstrates increased activity and durability toward the oxygen reduction reaction (ORR) in course of accelerated stress testing due to the high stability of SnO2 and its interaction with Pt. The polymer electrolyte membrane fuel cell current–voltage performance of the Pt/10wt %-SnO2/C is comparable with those of Pt/C, however, higher durability is expected.

Platinum nanocatalysts on metal oxide based supports for low temperature fuel cell applications

In this manuscript a survey of the contemporary research related to platinum nanocatalysts on metal oxide based supports for low temperature fuel cell applications is presented.

Stabilization of platinum–nickel alloy nanoparticles with a sulfur-doped graphene support in polymer electrolyte membrane fuel cells

Post-heat treatment of dealloyed Pt–Ni nanoparticles on sulfur-doped graphene for PEM fuel cell cathode catalysis exhibit greatly improved activity and electrochemically active surface area retention over Pt/C in half-cell conditions.

Large-scale roll-to-roll fabrication of ordered mesoporous materials using resol-assisted cooperative assembly

Roll-to-roll (R2R) processing enables the rapid fabrication of large-area sheets of cooperatively assembled materials for production of mesoporous materials. Evaporation induced self-assembly of a nonionic surfactant (Pluronic F127) with sol-gel precursors and phenolic resin oligomers (resol) produce highly ordered mesostructures for a variety of chemistries including silica, titania, and tin oxide. The cast thick (>200 μm) film can be easily delaminated from the carrier substrate (polyethylene terephthalate, PET) after cross-linking the resol to produce meter-long self-assembled sheets. The surface areas of these mesoporous materials range from 240 m(2)/g to >1650 m(2)/g with these areas for each material comparing favorably with prior reports in the literature. These R2R methods provide a facile route to the scalable production of kilograms of a wide variety of ordered mesoporous materials that have shown potential for a wide variety of applications with small-batch syntheses.