Synthesis of Carbon-coated Nanoplate α-Na 2 MoO 4 and its Electrochemical Lithiation Process as Anode Material for Lithium-ion Batteries

High-Performance Flexible Ionically Conductive Superhydrophobic Papers via Deep Eutectic Polymer-Enhanced Interfacial Interactions

Endowing paper with highly flexible, conductive, and superhydrophobic properties will effectively expand its applications in fields such as green packaging, smart sensing, and paper-based electronics. Herein, a multifunctional superhydrophobic paper is reported in which a highly flexible transparent conductive substrate is prepared by introducing a hydrophobic deep eutectic polymer into the ethylcellulose network via a matrix swelling-polymerization strategy, and then the substrate is modified using fluorinated silica to impart superhydrophobicity. By introducing soft deep eutectic polymers, (1) the superhydrophobic paper can efficiently dissipate energy during deformation, (2) intrinsically ion-conducting deep eutectic polymers can endow the material with good electrical sensing properties, and (3) meanwhile, enhanced interfacial interactions can anchor inorganic particles, thereby improving the coating stability. The prepared superhydrophobic paper has an ultrahigh water contact angle (contact angle ≈ 162.2°) and exhibits a stable electrical response signal to external deformation/pressure, and the electrical properties are almost unaffected by external water molecules. In addition, the superhydrophobic paper was able to withstand 5000 bending-recovery cycles at a large angle of 150°, exhibiting stable electrical performance. The design concepts demonstrated here will provide insights into the development of superhydrophobic paper-based flexible electronic devices.

A Bio-Inspired Nanotubular Na2MoO4/TiO2 Composite as a High-Performance Anodic Material for Lithium-Ion Batteries

A train of bio-inspired nanotubular Na₂MoO₄/TiO₂ composites were synthesized by using a natural cellulose substance (e.g., commercial ordinary filter paper) as the structural template. The TiO₂ gel films were coated on the cellulose nanofiber surfaces via a sol-gel method firstly, followed with the deposition of the poly(diallyldimethylammonium chloride)/Na₂MoO₄ (PDDA/Na₂MoO₄) bi-layers several times, through the layer-by-layer self-assembly route, yielding the (PDDA/Na₂MoO₄)_n/TiO₂-gel/cellulose composite, which was calcined in air to give various Na₂MoO₄/TiO₂ nanocomposites containing different Na₂MoO₄ contents (15.4, 24.1, and 41.4%). The resultant nanocomposites all inherited the three-dimensionally porous network structure of the premier cellulose substance, which were formed by hierarchical TiO₂ nanotubes anchored with the Na₂MoO₄ layers. When employed as anodic materials for lithium-ion batteries, those Na₂MoO₄/TiO₂ nanocomposites exhibited promoted electrochemical performances in comparison with the Na₂MoO₄ powder and pure TiO₂ nanotubes, which was resulted from the high capacity of the Na₂MoO₄ component and the buffering effects of the TiO₂ nanotubes. Among all the nanotubular Na₂MoO₄/TiO₂ composites, the one with a Na₂MoO₄ content of 41.4% showed the best electrochemical properties, such as the cycling stability with a capacity of 180.22 mAh g⁻¹ after 200 charge/discharge cycles (current density: 100 mA g⁻¹) and the optimal rate capability.

Engineering Na-Mo-O/Graphene Oxide Composites with Enhanced Electrochemical Performance for Lithium Ion Batteries

Sodium molybdate (Na−Mo−O) wrapped by graphene oxide (GO) composites have been prepared via a simple in‐situ precipitation method at room temperature. The composites are mainly constructed with one dimension (1D) ultra‐long sodium molybdate nanorods, which are wrapped by the flexible GO. The introduction of GO is expected to not merely provide more active sites for lithium‐ions storage, but also improve the charge transfer rate of the electrode. The testing electrochemical performances corroborated the standpoint: The Na−Mo−O/GO composites delivers specific capacities of 718 mAh g⁻¹ after 100 cycles at 100 mA g⁻¹, and 570 mAh g⁻¹ after 500 cycles at a high rate of 500 mA g⁻¹; for comparison, the bare Na−Mo−O nanorod shows a severe capacity decay, which deliver only 332 mAh g⁻¹ after 100 cycles at 100 mA g⁻¹. In view of the cost‐efficient and less time‐consuming in synthesis, and one‐step preparation without further treatment, these Na−Mo−O nanorods/GO composites present potential and prospective anodes for LIBs.