Enhanced electrocatalytic activity of vacuum thermal evaporated Cu x S counter electrode for quantum dot-sensitized solar cells

Heat-treatment-induced development of the crystalline structure and chemical stoichiometry of a CuxS counter electrode, and the influence on performance of quantum-dot-sensitized solar cells

Recently, various phases of Cu_xS (1 ≤ x ≤ 2) were extensively explored as superb counter electrode (CE) materials for quantum dot-sensitized solar cells (QDSSCs). Herein, hexagonal covellite CuS (HC-CuS) with hierarchical nanostructure was grown on porous Ti substrates by chemical bath deposition, and then heat treated in the temperature range of 150-450 °C under N₂ atmosphere. The reaction process and the evolution of morphology, composition and crystalline structure of Cu_xS with the variation of heat treatment temperature were studied by XRD, SEM, EDX, TEM and XPS. The photovoltaic properties of TiO₂/CdS/CdSe QDSSCs based on Cu_xS CEs showed an obvious dependence on the element stoichiometry and crystalline structure of the Cu_xS. With HC-Cu_1.28S heat-treated at 230 °C as CEs, QDSSCs achieved a power conversion efficiency of 3.88% under one sun illumination (100 mW cm^-2, AM 1.5 G), which was higher than the counterparts with other compositions. Electrochemical impedance spectroscopy, Tafel polarization and cyclic voltammetry measurement showed that the electrocatalytic activity of HC-Cu_1.28S CE was much higher than that of other Cu_xS CEs, which supported the results of the enhanced short-circuit current density, open circuit voltage and filling factor.

Ti Porous Film-Supported NiCo₂S₄ Nanotubes Counter Electrode for Quantum-Dot-Sensitized Solar Cells

In this paper, a novel Ti porous film-supported NiCo₂S₄ nanotube was fabricated by the acid etching and two-step hydrothermal method and then used as a counter electrode in a CdS/CdSe quantum-dot-sensitized solar cell. Measurements of the cyclic voltammetry, Tafel polarization curves, and electrochemical impedance spectroscopy of the symmetric cells revealed that compared with the conventional FTO (fluorine doped tin oxide)/Pt counter electrode, Ti porous film-supported NiCo₂S₄ nanotubes counter electrode exhibited greater electrocatalytic activity toward polysulfide electrolyte and lower charge-transfer resistance at the interface between electrolyte and counter electrode, which remarkably improved the fill factor, short-circuit current density, and power conversion efficiency of the quantum-dot-sensitized solar cell. Under illumination of one sun (100 mW/cm²), the quantum-dot-sensitized solar cell based on Ti porous film-supported NiCo₂S₄ nanotubes counter electrode achieved a power conversion efficiency of 3.14%, which is superior to the cell based on FTO/Pt counter electrode (1.3%).

Compound Copper Chalcogenide Nanocrystals

This review captures the synthesis, assembly, properties, and applications of copper chalcogenide NCs, which have achieved significant research interest in the last decade due to their compositional and structural versatility. The outstanding functional properties of these materials stems from the relationship between their band structure and defect concentration, including charge carrier concentration and electronic conductivity character, which consequently affects their optoelectronic, optical, and plasmonic properties. This, combined with several metastable crystal phases and stoichiometries and the low energy of formation of defects, makes the reproducible synthesis of these materials, with tunable parameters, remarkable. Further to this, the review captures the progress of the hierarchical assembly of these NCs, which bridges the link between their discrete and collective properties. Their ubiquitous application set has cross-cut energy conversion (photovoltaics, photocatalysis, thermoelectrics), energy storage (lithium-ion batteries, hydrogen generation), emissive materials (plasmonics, LEDs, biolabelling), sensors (electrochemical, biochemical), biomedical devices (magnetic resonance imaging, X-ray computer tomography), and medical therapies (photochemothermal therapies, immunotherapy, radiotherapy, and drug delivery). The confluence of advances in the synthesis, assembly, and application of these NCs in the past decade has the potential to significantly impact society, both economically and environmentally.

Recent advances in counter electrodes of quantum dot-sensitized solar cells

The recent progress in the development of counter electrodes (CEs) is reviewed, and the key issues for the materials, structures and performance evaluation of CEs are also addressed.