Spectroelectrochemical characterization of conducting polymers from star-shaped carbazole-triphenylamine compounds

N,N-Bis(9-methyl-3-carbazolyl)-4-anisidine as an Electroactive Material for Use in Perovskite Solar Cells

Di(9-methyl-3-carbazolyl)-(4-anisyl)amine is presented as an effective hole-transporting material suitable for application in perovskite solar cells. It is obtained by a three-step synthesis from inexpensive starting compounds. It has a relatively high glass transition temperature of 93 °C and thermal stability with 5% weight loss at 374 °C. The compound exhibits reversible double-wave electrochemical oxidation below +1.5 V and polymerization at higher potential. A mechanism for its oxidation is proposed based on electrochemical impedance and electron spin resonance spectroscopy investigations, ultraviolet-visible-near-infrared absorption spectroelectrochemistry results, and density functional theory-based calculations. Vacuum-deposited films of the compound are characterized by a low ionization potential of 5.02 ± 0.06 eV and hole mobility of 10^-3 cm²/(Vs) at an electric field of 4 × 10⁵ V/cm. The newly synthesized compound has been used to fabricate dopant-free hole-transporting layers in perovskite solar cells. A power conversion efficiency of 15.5% was achieved in a preliminary study.

Highly conjugated carbazole-based monomers for the control of nanotubular surface structures by soft template electropolymerization

In this work, a bioinspired approach is used to prepare nanotubular structures with tunable hydrophobicity and water adhesion by a soft template surfactant-free electropolymerization in organic solvent. Various highly conjugated carbazole-based molecules are used as monomer. The presence of water in the organic solvent enables the formation of porous and rough nanostructures. Their shapes depend essentially on the nature of the monomer and the way it polymerizes. Various morphologies were obtained from nanoparticles network to horizontally or vertically aligned nanotubes. The nanostructured surfaces reach superhydrophobic properties and their dynamical behavior varies with the monomer from sticky to slippery. For example, using 9,3′:6′,9″-tercarbazole (TC) very long nanotubes are observed but their number is higher at constant potential. At high deposition charge, it is observed that most of the tubes are even collapsed leading to a strong increase of surface hydrophobicity with apparent contact angle up to 143° with strong water adhesion comparable to rose petals or gecko foot.

Controlling and Fine-Tuning Charge-Transfer Emission in 2,6-Dicyanoaniline Multichromophores Prepared through Domino Reactions: Entry to a Potentially New Class of OLEDs

Substituted 2,6-dicyanoanilines are versatile electron donor-acceptor compounds, which have recently received considerable attention, since they exhibit strong fluorescence and may have utility in the synthesis of fluorescent materials, non-natural photosynthetic systems, and materials with nonlinear optical properties. The majority of known synthetic procedures are, however, "stop-and-go" reaction processes involving time-consuming and waste-producing isolation and purification of product intermediates. Here, we present the synthesis of substituted 2,6-dicyanoanilines via atom-economical and eco-friendly one-pot processes, involving metal-free domino reactions, and their subsequent photochemical and photophysical measurements and theoretical calculations. These studies exhibit the existence of an easily tunable radical ion pair-based charge-transfer (CT) emission in the synthesized 2,6-dicyanoaniline-based electron donor-acceptor systems. The charge-transfer processes were explored by photochemical and radiation chemical measurements, in particular, based on femtosecond laser photolysis transient absorption spectroscopy and time-resolved emission spectroscopy, accompanied by pulse radiolysis and complemented by quantum chemical investigations employing time-dependent density-functional theory. This chromophore class exhibits a broad-wavelength-range fine-tunable charge recombination emission with high photoluminescence quantum yields up to 0.98. Together with its rather simple and cost-effective synthesis (using easily available starting materials) and customizable properties, it renders this class of compounds feasible candidates as potential dyes for future optoelectronic devices like organic light-emitting diodes (OLEDs).

In Situ Electropolymerization Enables Ultrafast Long Cycle Life and High-Voltage Organic Cathodes for Lithium Batteries

Organic cathode materials have attracted extensive attention because of their diverse structures, facile synthesis, and environmental friendliness. However, they often suffer from insufficient cycling stability caused by the dissolution problem, poor rate performance, and low voltages. An in situ electropolymerization method was developed to stabilize and enhance organic cathodes for lithium batteries. 4,4',4''-Tris(carbazol-9-yl)-triphenylamine (TCTA) was employed because carbazole groups can be polymerized under an electric field and they may serve as high-voltage redox-active centers. The electropolymerized TCTA electrodes demonstrated excellent electrochemical performance with a high discharge voltage of 3.95 V, ultrafast rate capability of 20 A g^-1 , and a long cycle life of 5000 cycles. Our findings provide a new strategy to address the dissolution issue and they explore the molecular design of organic electrode materials for use in rechargeable batteries.

Donor-Acceptor 1,2,4,5-Tetrazines Prepared by the Buchwald-Hartwig Cross-Coupling Reaction and Their Photoluminescence Turn-On Property by Inverse Electron Demand Diels-Alder Reaction

A facile efficient synthetic tool, Buchwald-Hartwig cross-coupling reaction, for the functionalization of 1,2,4,5-tetrazines is presented. Important factors affecting the Buchwald-Hartwig cross-coupling reaction have been optimized. Seven new donor-acceptor tetrazine molecules (TA1-TA7) were conveniently prepared in good to high yields (61-72%). They have been subsequently engaged in the inverse electron demand Diels-Alder (iEDDA) reaction with cyclooctyne. The photophysical and electrochemical properties of the new pyridazines have been studied. Some are fluorescent acting as turn-on probes. More importantly, two pyridazines (DA3 and DA6) exhibit room-temperature phosphorescence (RTP) properties.

Investigation of thermal and fluorescent properties of benzoxazole-linked triphenylamine-based co-polyimides

A series of novel fluorescent co-polyimides are obtained by combining N 1-(4-aminophenyl)- N 1-(4-(benzo[ d]oxazol-2-yl) phenyl) benzene-1,4-diamine and 4,4′-oxydianiline with four aromatic anhydride, 3,3′,4,4′-benzophenonetetracarboxylic dianhydride, pyromellitic dianhydride, 4,4′-oxydiphthalic anhydride, and 4,4 ′-(hexafluoroisopropylidene)diphthalic anhydride following conventional polycondensation method. The resultant co-polyimides are characterized by elemental, Fourier transform infrared spectral analysis and gel permeation chromatography. All newly prepared polyimides (PIs) exhibit shallow highest occupied molecular orbital energy levels in the range of −4.47 to −4.98 eV and have reasonable optical bandgaps. The photoluminescence spectral analysis shows blue to green emission in solution form. Thermal and solubility properties reveal that the PIs with pendant 4-(benzo[ d]oxazol-2-yl group linked to triphenylamine unit in polymer backbone impart not only good thermal stability but also appreciable solubility making these new co-polyimides versatile for multipurpose usage.

An overview on synthetic strategies for the construction of star-shaped molecules

Strategies for the synthesis of star-shaped molecules have been in high demand in the last decades due to the importance of those compounds in various fields. The distinctly different properties of these compounds compared to their linear analogues make them versatile building blocks for the formation of mesophases of interesting mesomorphic and photophysical properties. Moreover, the applications of star-shaped molecules as building units for dendrimers as well as in supramolecular host-guest chemistry have also been recently studied. The star-shaped molecules mentioned in this review are classified according to the central core as well as the type of side arms. The properties and applications of these compounds are described in the appropriate contexts. This report summarizes the recent advances in this area.

Recent advances in spectroelectrochemistry

The integration of two quite different techniques, conventional electrochemistry and spectroscopy, into spectroelectrochemistry (SEC) provides a complete description of chemically driven electron transfer processes and redox events for different kinds of molecules and nanoparticles. SEC possesses interdisciplinary advantages and can further expand the scopes in the fields of analysis and other applications, emphasizing the hot issues of analytical chemistry, materials science, biophysics, chemical biology, and so on. Considering the past and future development of SEC, a review on the recent progress of SEC is presented and selected examples involving surface-enhanced Raman scattering (SERS), ultraviolet-visible (UV-Vis), near-infrared (NIR), Fourier transform infrared (FTIR), fluorescence, as well as other SEC are summarized to fully demonstrate these techniques. In addition, the optically transparent electrodes and SEC cell design, and the typical applications of SEC in mechanism study, electrochromic device fabrication, sensing and protein study are fully introduced. Finally, the key issues, future perspectives and trends in the development of SEC are also discussed.

Recent advances in triphenylamine-based electrochromic derivatives and polymers

Triphenylamine-containing electrochromic materials with great potential applications in low energy-consumption displays, light-adapting mirrors in vehicles, and smart windows have experienced an exponential growth of research interests. In this review, the newly developed triphenylamine-based derivatives and polymers are reviewed and elaborated.

4-quinolin-8-yloxy Linked Triphenylamine Based Polyimides: Blue Light Emissive and Potential Hole-Transport Materials

A series of fluorescent donor- acceptor (D-A) alternating copolyimides (P1, P2, P3 and P4) with 4-quinolin-8-yloxy linked triphenylamine main polymer chain have been synthesized by conventional polycondensation. All the synthesized co-polyimides were characterized by elemental, gel permeation chromatography and FTIR spectral analysis. These newly prepared PIs possess HOMO energy levels in range of - 4.74 to - 4.78 eV and have medium optical band gaps. The photoluminescence spectral analysis revealed blue to violet emission with appreciable efficiency with lower onset oxidation potentials suitable for the facile hole injection materials. All the photophysical and electrochemical properties were also explored in context of effect of the pendant 4- quinolin-8-yloxy, indicating suitable combination of donor (TPA) on one hand and imide and pendant as acceptor on both ends.Graphical Abstract.

Poly(tris(4-carbazoyl-9-ylphenyl)amine)/Three Poly(3,4-ethylenedioxythiophene) Derivatives in Complementary High-Contrast Electrochromic Devices

A carbazole-based polymer (poly(tris(4-carbazoyl-9-ylphenyl)amine) (PtCz)) is electrosynthesized on an indium tin oxide (ITO) electrode. PtCz film displays light yellow at 0.0 V, earthy yellow at 1.3 V, grey at 1.5 V, and dark grey at 1.8 V in 0.2 M LiClO₄/ACN/DCM (ACN/DCM = 1:3, by volume) solution. The ΔT and coloration efficiency (η) of PtCz film are 30.5% and 54.8 cm²∙C-1, respectively, in a solution state. Three dual-type electrochromic devices (ECDs) are fabricated using the PtCz as the anodic layer, poly(3,4-ethylenedioxythiophene) (PEDOT), poly(3,3-dimethyl-3,4-dihydro-thieno[3,4-b][1,4]dioxepine) (PProDOT-Me₂), and poly(3,4-(2,2-diethylpropylenedioxy)thiophene) (PProDOT-Et₂) as the cathodic layers. PtCz/PProDOT-Me₂ ECD shows high ΔTmax (36%), high ηmax (343.4 cm²·C-1), and fast switching speed (0.2 s) at 572 nm. In addition, PtCz/PEDOT, PtCz/PProDOT-Me₂, and PtCz/PProDOT-Et₂ ECDs show satisfactory open circuit memory and long-term stability.

Synthesis and characterization of blue light emitting redox-active polyimides bearing a noncoplanar fused carbazole–triphenylamine unit

Photoactive organosoluble polyimides containing a fused triphenylamine–carbazole group were synthesized. These polyimides demonstrated significant potential for optoelectronic devices.