The use of cheap polyaniline and melamine co-modified carbon nanotubes as active and stable catalysts for oxygen reduction reaction in alkaline medium

Simultaneously Altering the Energy Release and Promoting the Adhesive Force of an Electrophoretic Energetic Film with a Fluoropolymer

Energetic coatings have attracted a great deal of interest with respect to their compatibility and high energy and power density. However, their preparation by effective and inexpensive methods remains a challenge. In this work, electrophoretic deposition was investigated for the deposition of an Al/CuO thermite coating as a typical facile effective and controllable method. Given the poor adhesion of the deposited film and the native inert Al₂O₃ shell on Al limiting energy output, further treatment was conducted by soaking in a Nafion solution, which not only acted as a fluoropolymer binder but also introduced a strong F oxidizer. It is interesting to note that the adhesion level of Al/CuO films was improved greatly from 1B to 4B, which was attributed to Nafion organic network film formation, like a fishing net covering the loose particles in the film. Combustion and energy release were analyzed using a high-speed camera and a differential scanning calorimeter. A combustion rate of ≤3.3 m/s and a heat release of 2429 J/g for Al/NFs/CuO are far superior to those of pristine Al/CuO (1.3 m/s and 841 J/g, respectively). The results show that the excellent combustion and heat release properties of the energetic film system are facilitated by the good combustion-supporting properties of organic molecules and the increase in the film density after organic treatment. The prepared Al/NFs/CuO film was also employed as ignition material to fire B-KNO₃ explosive successfully. This study provides a new way to prepare organic-inorganic hybrid energetic films, simultaneously altering the energy release and enhancing the adhesive force. In addition, the Al/NFs/CuO coating also showed considerable potential as an ignition material in microignitors.

Surface-rough Fe-N/C composite wrapped on carbon nanotubes as efficient electrocatalyst for oxygen reduction reaction

Fe-N/C composites are considered one of the most promising non-precious-metal electrocatalysts for oxygen reduction reaction (ORR). In this paper, we fabricate a novel and efficient carbon nanotube (CNT)-supported Fe-N/C composite catalyst, via the surface-self-polymerization of polydopamine and then the incorporation with Fe species on CNTs, followed by the pyrolysis process. The obtained catalyst demonstrates excellent electrocatalytic performance towards ORR in alkaline media. The modification of Fe-incorporated nitrogen-rich-carbons (Fe-CN_x) on CNTs lowers the ORR half-wave-potential by ∼190 mV, giving this catalyst with an onset ORR potential of 0.95 V (versus reversible hydrogen electrode (RHE)), a half-wave potential of 0.82 V (versus RHE), and the limiting current density of 5.39 mA cm^-2 in 0.1 M KOH. The performance of the as-prepared catalyst is comparatively better than the commercially available Pt/C in terms of positive half-wave potential and larger limiting current, superior durability, and higher tolerance to the methanol.

Efficient oxygen electroreduction over ordered mesoporous Co–N-doped carbon derived from cobalt porphyrin

High-performance self-supported Co–N-doped carbon electrocatalyst for ORR with comparable activity to Pt/C in both acidic and alkaline media was prepared.

Easy conversion of protein-rich enoki mushroom biomass to a nitrogen-doped carbon nanomaterial as a promising metal-free catalyst for oxygen reduction reaction

The search for low-cost, highly active, and stable catalysts to replace the Pt-based catalysts for oxygen reduction reaction (ORR) has recently become a topic of interest. Herein, we report a new strategy to design a nitrogen-doped carbon nanomaterial for use as a metal-free ORR catalyst based on facile pyrolysis of protein-rich enoki mushroom (Flammulina velutipes) biomass at 900 °C with carbon nanotubes as a conductive agent and inserting matrix. We found that various forms of nitrogen (nitrile, pyrrolic and graphitic) were incorporated into the carbon molecular skeleton of the product, which exhibited more excellent ORR electrocatalytic activity and better durability in alkaline medium than those in acidic medium. Remarkably, the ORR half-wave potential measured on our material was around 0.81 V in alkaline medium, slightly lower than that on the commercial 20 wt% Pt/C catalyst (0.86 V). Meanwhile, the ORR followed the desired 4-electron transfer mechanism involving the direct reduction pathway. The ORR performance was also markedly better than or at least comparable to the leading results in the literature based on biomass-derived carbon-based catalysts. Besides, we significantly proposed that the graphitic-nitrogen species that is most responsible for the ORR activity can function as the electrocatalytically active center for ORR, and the pyrrolic-nitrogen species can act as an effective promoter for ORR only. The results suggested a promising route based on economical and sustainable fungi biomass towards the large-scale production of valuable carbon nanomaterials as highly active and stable metal-free catalysts for ORR under alkaline conditions.

Inexpensive Ipomoea aquatica Biomass-Modified Carbon Black as an Active Pt-Free Electrocatalyst for Oxygen Reduction Reaction in an Alkaline Medium

The development of inexpensive and active Pt-free catalysts as an alternative to Pt-based catalysts for oxygen reduction reaction (ORR) is an essential prerequisite for fuel cell commercialization. In this paper, we report a strategy for the design of a new Fe-N/C electrocatalyst derived from the co-pyrolysis of Ipomoea aquatica biomass, carbon black (Vulcan XC-72R) and FeCl₃·6H₂O at 900 °C under nitrogen atmosphere. Electrochemical results show that the Fe-N/C catalyst exhibits higher electrocatalytic activity for ORR, longer durability and higher tolerance to methanol compared to a commercial Pt/C catalyst (40 wt %) in an alkaline medium. In particular, Fe-N/C presents an onset potential of 0.05 V (vs. Hg/HgO) for ORR in an alkaline medium, with an electron transfer number (n) of ~3.90, which is close to that of Pt/C. Our results confirm that the catalyst derived from I. aquatica and carbon black is a promising non-noble metal catalyst as an alternative to commercial Pt/C catalysts.