Design of Novel Graphene Materials as a Support for Palladium Nanoparticles: Highly Active Catalysts towards Ethanol Electrooxidation

Facile electrolysis-solvothermal synthesis of NiOx/graphene for enhanced ethanol oxidation to acetate

In this work, low-crystalized and defective NiOx/graphene was synthesized by a facile electrolysis-solvothermal method. In the electrolytic process, Ni ions originate from the Ni anode, and graphene is produced from the graphite cathode. Then, Ni ions are reduced into oxides and deposited on graphene in the subsequent solvothermal process. The NiOx/graphene displays excellent electrocatalytic activity and selectivity for ethanol oxidation reaction to acetate. The peak current density was 296.5 mA cm-2 on a glassy carbon electrode. The FE of acetate was more than 93% at the potential range between 1.4 and 1.7 V. We propose that the mechanism is a cooperation between the chemical deprotonating process of ethanol by Ni3+ species and the electrochemical oxidation of the CH3CH2O* intermediate to acetate at the interface between NiOx and graphene.

Pt nanoparticles supported on nitrogen-doped porous carbon as efficient oxygen reduction catalysts synthesized via a simple alcohol reduction method

Abstract

Pt nanoparticles supported on nitrogen-doped porous carbon (NPC) were investigated as both a highly active catalyst for the oxygen reduction reaction (ORR) and a suitable porous support structure. Pt/NPC catalysts with loadings of 8.8–35.4 wt.% were prepared via a simple alcohol reduction method and exhibited homogeneously dispersed Pt nanoparticles with a small mean size ranging from 1.90 to 2.99 nm. X-ray photoelectron spectroscopy measurement suggested the presence of strong interactions between the Pt nanoparticles and NPC support. 27.4% Pt/NPC demonstrated high catalytic activity for the ORR in a rotating disk electrode system and was also effectively applied to a gas diffusion electrode (GDE). A GDE fabricated using the Pt/NPC with a fine pore network exhibited excellent performance, especially at high current densities. Specific activity of Pt/NPC and Pt/carbon black catalysts for the ORR correlated with the peak potential of adsorbed OH reduction on Pt, which was dependent on the particle size and support.

Graphic abstract

Phyco-linked vs chemogenic magnetite nanoparticles: Route selectivity in nano-synthesis, antibacterial and acute zooplanktonic responses

Despite the fact that magnetic iron oxide nanoparticles (Fe₃O₄-MNPs) considered as the most promising nanoparticles (NPs) in biomedicine and environmental biotechnology, their safety and ecotoxicological impacts of biogenic and chemogenic routes of Fe₃O₄-MNPs in the marine aquatic system is scarcely studied. In this work, we report the optimized and suitable phyco-synthesis route for nano-Fe₃O₄ based on the six selected species of the Persian Gulf seaweeds: Ulva prolifera, U. flexuosa, U. linza, U. intestinalis, U. clathrata, and Sargassum boveanum. Moreover, antibacterial activities and acute zooplanktonic responses in Artemia salina and acorn barnacle Amphibalanus amphitrite to chemogenic and biogenic Fe₃O₄-MNPs, were evaluated. Although all the seaweeds extract showed reducing potential for Fe₃O₄-MNPs green synthesis - mainly on the basis of characterization results- the algal route selectivity has been demonstrated to be important for the biosynthesis of magnetite NPs. Herein, the cubo-spherical and polydisperse U. prolifera-derived Fe₃O₄-MNPs with particles sizes of 9.59 nm were the best ones. The comparative zooplanktonic cytotoxicity of chemo- and bio-route of Fe₃O₄-MNPs exhibited no acute toxicity in nauplii and adults of A. salina (96-h EC₅₀ ≥ 1000 mg/L) and the potential of toxicity in A. amphitrite nauplii (48-h EC₅₀ = 466.5 and 842.3 mg/L for chemo- and bio-route of Fe₃O₄-MNPs, respectively). The in vitro antimicrobial activity of both chemo- and bio-route of magnetite NPs to selective human pathogenic bacteria and fungi (i.e. n = 11) showed strong antagonistic activity against Staphylococcus epidermidis, Bacillus subtilis, B. pumulis, and Saccharomyces cerevisiae. In conclusion, these findings demonstrate the optimized phyco-fabrication of Fe₃O₄-MNPs as promising nontoxic approach in ecobiotechnology, the new insight about the potential adverse effects of chemosynthesized Fe₃O₄-MNPs to crustacean zoo-organisms after their possible entrance into the marine environments, and bio/chemo-route Fe₃O₄-MNPs as pivotal agent for nanoantimicrobials.

Surface-modified three-dimensional graphene nanosheets as a stationary phase for chromatographic separation of chiral drugs

Carbon-based stationary phases for chromatographic separation have been commercially available since the 1980s. Porous graphitic carbon liquid chromatography columns are known to be highly resistant to aggressive mobile phases and extreme pH values of solvents and eluents, an important advantage compared to conventional silica-based alternatives. In our work, we demonstrate a new variant of carbon-based stationary phases for liquid chromatography, specifically developed for chiral separation. Mesoporous three-dimensional graphene nanosheets (3D GNS), functionalized with tetracyanoethylene oxide (TCNEO) and (S)-(+)-2-pyrrolidinemethanol, demonstrate pharmaceutical-grade chiral separation of model ibuprofen and thalidomide racemic mixtures when used as Chiral Stationary Phases (CSPs), with performance parameters comparable to currently commercially available CSPs. Simple covalent attachment of functionalization groups to the surface of mesoporous three-dimensional graphene nanosheets makes these carbon-based CSPs chemically stable and up to an order of magnitude less expensive than standard silica-based analogues.

Role of Nitrogen Moieties in N-Doped 3D-Graphene Nanosheets for Oxygen Electroreduction in Acidic and Alkaline Media

This study elucidates the synthesis-structure-property correlations of nitrogen moieties present in nitrogen-functionalized graphene nanomaterials toward oxygen reduction reactions (ORRs) and their electrochemical pathways in acidic and alkaline electrolytes. Porous three-dimensional nitrogen-doped graphene nanosheets (N/3D-GNSs) were fabricated using the sacrificial support method and doped with nitrogen using 10 atom % NH₃ under thermal pyrolysis at T = 650, 850, and 1050 °C for evaluating the nitrogen species formed under different temperatures. The abundances of the various nitrogen species formed under pyrolytic conditions were evaluated with X-ray photoelectron spectroscopy. Using rotating ring-disk electrode, we analyzed the role played by the nitrogen moieties influencing the electrochemical activity of the N/3D-GNS supports for oxygen reduction reactions (ORRs) in both acidic and alkaline media. It was demonstrated that the concentrations of the nitrogen moieties: graphitic-N, quaternary, hydrogenated-N (hydrogenated nitrogen combined pyrrolic nitrogen and hydrogenated pyridine) and pyridinic-N varied considerably with pyrolysis temperatures. A decrease in graphitic-N content and an increase in the ratio of hydrogenated-N/pyridinic-N significantly improved the activity of the material. The half-wave and onset potentials as well as the current densities and hydrogen peroxide (H₂O₂)/(HO₂^-) yields of the N/3D-GNS materials also varied between acidic and alkaline electrolytes but followed the general trend in terms of pyrolysis temperatures and abundance of the nitrogen moieties. Among the synthesized materials, the 3D-graphene nanosheets that were doped with nitrogen at 850 °C, optimized to have the highest hydrogenated-N and lowest pyridinic-N as well as better catalyst-ionomer integration, showed the highest ORR performance. This strategy for the tunable synthesis of nitrogen-doped graphene materials with controlled nitrogen functionalization offers a platform for developing active supports or catalytic nanomaterials for fuel cell applications.

Enhancement of microbial fuel cell performance by introducing a nano-composite cathode catalyst

Iron aminoantipyrine (Fe-AAPyr), graphene nanosheets (GNSs) derived catalysts and their physical mixture Fe-AAPyr-GNS were synthesized and investigated as cathode catalysts for oxygen reduction reaction (ORR) with the activated carbon (AC) as a baseline. Fe-AAPyr catalyst was prepared by Sacrificial Support Method (SSM) with silica as a template and aminoantipyrine (AAPyr) as the organic precursor. 3D-GNS was prepared using modified Hummers method technique. The Oxygen Reduction Reaction (ORR) activity of these catalysts at different loadings was investigated by using rotating ring disk (RRDE) electrode setup in the neutral electrolyte. The performance of the catalysts integrated into air-breathing cathode was also investigated. The co-presence of GNS (2 mg cm⁻²) and Fe-AAPyr (2 mg cm⁻²) catalyst within the air-breathing cathode resulted in the higher power generation recorded in MFC of 235 ± 1 μW cm⁻². Fe-AAPyr catalyst itself showed high performance (217 ± 1 μW cm⁻²), higher compared to GNS (150 ± 5 μW cm⁻²) while AC generated power of roughly 104 μW cm⁻².

•

Fe-AAPyr and GNS were synthesized and characterized.

•

Rotating ring disk electrode (RRDE) setup was performed in the neutral electrolyte.

•

Fe-AAPyr had higher half wave potential and lower H₂O₂ production.

•

The combination of Fe-AAPyr and GNS led to a power generation of 235 ± 1 μWcm⁻².

•

Both Fe-AAPyr and GNS outperformed compared to activated carbon control.

Electrochemical sensor based on palladium loaded laser scribed graphitic carbon nanosheets for ultrasensitive detection of hydrazine

Schematic of the synthesis of Pd/LSGCNs/GCE and its electrochemical response to a series of hydrazine concentrations.

Three-dimensional graphene nanosheets as cathode catalysts in standard and supercapacitive microbial fuel cell

Three-dimensional graphene nanosheets (3D-GNS) were used as cathode catalysts for microbial fuel cells (MFCs) operating in neutral conditions. 3D-GNS catalysts showed high performance towards oxygen electroreduction in neutral media with high current densities and low hydrogen peroxide generation compared to activated carbon (AC). 3D-GNS was incorporated into air-breathing cathodes based on AC with three different loadings (2, 6 and 10 mgcm-2). Performances in MFCs showed that 3D-GNS had the highest performances with power densities of 2.059 ± 0.003 Wm-2, 1.855 ± 0.007 Wm-2 and 1.503 ± 0.005 Wm-2 for loading of 10, 6 and 2 mgcm-2 respectively. Plain AC had the lowest performances (1.017 ± 0.009 Wm-2). The different cathodes were also investigated in supercapacitive MFCs (SC-MFCs). The addition of 3D-GNS decreased the ohmic losses by 14-25%. The decrease in ohmic losses allowed the SC-MFC with 3D-GNS (loading 10 mgcm-2) to have the maximum power (Pmax) of 5.746 ± 0.186 Wm-2. At 5 mA, the SC-MFC featured an "apparent" capacitive response that increased from 0.027 ± 0.007 F with AC to 0.213 ± 0.026 F with 3D-GNS (loading 2 mgcm-2) and further to 1.817 ± 0.040 F with 3D-GNS (loading 10 mgcm-2).

Cuprous oxide template synthesis of hollow-cubic Cu2O@PdxRuynanoparticles for ethanol electrooxidation in alkaline media

Surfactant-free and low Pd loading Cu₂O@Pd_xRu_yhollow-cubes were facilely prepared and their electrocatalytic performance for ethanol electrooxidation were investigated.