Recent Advances in the Growth of Metals, Alloys, and Multilayers by Surface Limited Redox Replacement (SLRR) Based Approaches

Preparation of Gold Nanoparticles via Anodic Stripping of Copper Underpotential Deposition in Bulk Gold Electrodeposition for High-Performance Electrochemical Sensing of Bisphenol A

Bisphenol A is one of the most widely used industrial compounds. Over the years, it has raised severe concern as a potential hazard to the human endocrine system and the environment. Developing robust and easy-to-use sensors for bisphenol A is important in various areas, such as controlling and monitoring water purification and sewage water systems, food safety monitoring, etc. Here, we report an electrochemical method to fabricate a bisphenol A (BPA) sensor based on a modified Au nanoparticles/multiwalled carbon nanotubes composite electrocatalyst electrode (AuCu-UPD/MWCNTs/GCE). Firstly, the Au-Cu alloy was prepared via a convenient and controllable Cu underpotential/bulk Au co-electrodeposition on a multiwalled modified carbon nanotubes glassy carbon electrode (GCE). Then, the AuCu-UPD/MWCNTs/GCE was obtained via the electrochemical anodic stripping of Cu underpotential deposition (UPD). Our novel prepared sensor enables the high-electrocatalytic and high-performance sensing of BPA. Under optimal conditions, the modified electrode showed a two-segment linear response from 0.01 to 1 µM and 1 to 20 µM with a limit of detection (LOD) of 2.43 nM based on differential pulse voltammetry (DPV). Determination of BPA in real water samples using AuCu-UPD/MWCNTs/GCE yielded satisfactory results. The proposed electrochemical sensor is promising for the development of a simple, low-cost water quality monitoring system for the detection of BPA in ambient water samples.

Recent Advances in Bimetallic Nanoporous Gold Electrodes for Electrochemical Sensing

Bimetallic nanocomposites and nanoparticles have received tremendous interest recently because they often exhibit better properties than single-component materials. Improved electron transfer rates and the synergistic interactions between individual metals are two of the most beneficial attributes of these materials. In this review, we focus on bimetallic nanoporous gold (NPG) because of its importance in the field of electrochemical sensing coupled with the ease with which it can be made. NPG is a particularly important scaffold because of its unique properties, including biofouling resistance and ease of modification. In this review, several different methods to synthesize NPG, along with varying modification approaches are described. These include the use of ternary alloys, immersion-reduction (chemical, electrochemical, hybrid), co-electrodeposition-annealing, and under-potential deposition coupled with surface-limited redox replacement of NPG with different metal nanoparticles (e.g., Pt, Cu, Pd, Ni, Co, Fe, etc.). The review also describes the importance of fully characterizing these bimetallic nanocomposites and critically analyzing their structure, surface morphology, surface composition, and application in electrochemical sensing of chemical and biochemical species. The authors attempt to highlight the most recent and advanced techniques for designing non-enzymatic bimetallic electrochemical nanosensors. The review opens up a window for readers to obtain detailed knowledge about the formation and structure of bimetallic electrodes and their applications in electrochemical sensing.

Hexagonal BaTiO(3-x)Hx Oxyhydride as a Water-Durable Catalyst Support for Chemoselective Hydrogenation

We present heavily H^--doped BaTiO_(3-x)H_x (x ≈ 1) as an efficient and water-durable catalyst support for Pd nanoparticles applicable to liquid-phase hydrogenation reactions. The BaTiO_(3-x)H_x oxyhydride with a hexagonal crystal structure (P6₃/mmc) was synthesized by the direct reaction of BaH₂ and TiO₂ at 800 °C under a stream of hydrogen, and the estimated chemical composition was BaTiO_2.01H_0.96. Density functional theory calculations and magnetic measurements indicated that such heavy H^- doping results in a metallic nature with delocalized electrons and a low work function. The potential of BaTiO_(3-x)H_x as a catalyst support was examined for the selective hydrogenation of unsaturated C-C bonds by Pd nanoparticles deposited on BaTiO_(3-x)H_x. We found that the turnover frequency for phenylacetylene hydrogenation per total amount of Pd in Pd/BaTiO_(3-x)H_x was the highest among the supported Pd catalysts reported to date. The strong electronic charge transfer between Pd and the support, as confirmed by X-ray photoelectron spectroscopy measurements, can be attributed to be responsible for such high catalytic activity. The combination of the BaTiO_(3-x)H_x support and Pd nanoparticles provides for the selective hydrogenation of unsaturated C-C bonds and highlights the validity of catalyst design that integrates H^- in support materials.

A minireview on the synthesis of single atom catalysts

Single atom catalysis is a prosperous and rapidly growing research field, owing to the remarkable advantages of single atom catalysts (SACs), such as maximized atom utilization efficiency, tailorable catalytic activities as well as supremely high catalytic selectivity. Synthesis approaches play crucial roles in determining the properties and performance of SACs. Over the past few years, versatile methods have been adopted to synthesize SACs. Herein, we give a thorough and up-to-date review on the progress of approaches for the synthesis of SACs, outline the general principles and list the advantages and disadvantages of each synthesis approach, with the aim to give the readers a clear picture and inspire more studies to exploit novel approaches to synthesize SACs effectively.

Multilayer electrodeposition of Pt onto 1-2 nm Au nanoparticles using a hydride-termination approach

Here we report on hydride-terminated (HT) electrodeposition of Pt multilayers onto ∼1.6 nm Au nanoparticles (NPs). The results build on our earlier findings regarding electrodeposition of a single monolayer of Pt onto Au NPs and reports relating to HT Pt electrodeposition onto bulk Au. In the latter case, it was found that electrodeposition of Pt from a solution containing PtCl42- can be limited to a single monolayer of Pt atoms if it is immediately followed by adsorption of a monolayer of H atoms. The H-atom capping layer prevents deposition of Pt multilayers. In the present report we are interested in comparing the structure of NPs after multiple HT Pt electrodeposition cycles to the bulk analog. The results indicate that a greater number of HT Pt cycles are required to electrodeposit both a single Pt monolayer and Pt multilayers onto these Au NPs compared to bulk Au. Additionally, detailed structural analysis shows that there are fundamental differences in the structures of the AuPt materials depending on whether they are prepared on Au NPs or bulk Au. The resulting structures have a profound impact on formic acid oxidation electrocatalysis.

Ultrathin Film PtxPd(1-x) Alloy Catalysts for Formic Acid Oxidation Synthesized by Surface Limited Redox Replacement of Underpotentially Deposited H Monolayer

This work emphasizes the development of a green synthetic approach for growing ultrathin film PtxPd(1-x) alloy catalysts for formic acid oxidation (FAO) by surface limited redox replacement of underpotentially deposited H sacrificial layer. Up to three-monolayers-thick PtxPd(1-x) films with different composition are generated on Au electrodes and characterized for composition and surface roughness using XPS and electrochemical methods, respectively. XPS results show close correlation between solution molar ratio and atomic composition, with slightly higher Pt fraction in the deposited films. The accordingly deposited Pt42Pd58 films demonstrated remarkable specific and mass activities of up to 35 mAcm−2 and 45 Amg−1 respectively, lasting for more than 1500 cycles in FAO tests. This performance, found to be better twice or more than that of pure Pt counterparts, renders the Pt42Pd58 films comparable with the frontrunner FAO catalysts. In addition, the best alloy catalyst establishes a nearly hysteresis-free FAO CV curve a lot earlier than its Pt counterpart and thus supports the direct FAO pathway for longer. Overall, the combination of high Pd activity and CO tolerance with the remarkable Pt stability results in highly active and durable FAO catalysts. Finally, this facile and cost-effective synthetic approach allows for scaling the catalyst production and is thus appropriate for foreseeable commercialization.

Tuning Surface Chemoresistivity of Au Ultrathin Films Using Metal Deposition via Surface-Limited Redox Replacement of the Underpotentially Deposited Pb Monolayer

The presented work investigates the chemoresistivity of Au ultrathin films, whose surface is modified by deposition of few monolayers of Au, Pd, or AuPd alloy. The model adsorbate in this study was the HS^- ion from 0.1 M NaCl solution having concentrations ranging from 0 to 40 ppm. The Au surface modification was carried out using deposition via surface-limited redox replacement of the underpotentially deposited Pb monolayer. Modified Au films have shown higher chemoresistivity than the pristine ones. Our results and analysis suggest that these improvements are due to increased concentration of surface defects and enhanced scattering cross-section per adsorbate induced by chemical modification of the surface by Pd. The significance of our findings is discussed for practical applications shining more light on the importance of surface preparation for chemoresistive sensor design and performance.

Highly Active and Durable Cu x Au(1-x) Ultrathin-Film Catalysts for Nitrate Electroreduction Synthesized by Surface-Limited Redox Replacement

Cu _x Au_(1-x) bimetallic ultrathin-film catalysts for nitrate electroreduction have been synthesized using electrochemical atomic layer deposition by surface-limited redox replacement of Pb underpotentially deposited layer. Controlled by the ratio of [Cu²⁺] ions and [AuCl₄ ^-] complex in the deposition solution, the alloy film composition (atomic fraction, x in the range of 0.5-1) has been determined by X-ray photoelectron spectroscopy and indirectly estimated by anodic stripping voltammetry. The catalytic activity and durability of Cu _x Au_(1-x) thin films, Cu thin film, and bulk Cu have been studied by one- and multiple-cycle voltammetry. The synthesized Cu _x Au_(1-x) thin films feature up to two times higher nitrate electroreduction activity in acidic solution compared to bulk and thin-film Cu counterparts. Highest activity has been measured with a Cu_0.70Au_0.30 catalyst. Durability tests have demonstrated that Cu thin films undergo rapid deactivation losing 65% of its peak activity for 92 cycles, whereas Cu_0.70Au_0.30 catalysts lose only 45% of their top performance. The significantly better durability of alloy films can be attributed to effective resistance to poisoning and/or hindered dissolution of Cu active centers. It has been also found that both Cu _x Au_(1-x) and pure Cu thin films show best electroreduction activity at lowest pH.

Electroless Deposition of Pb Monolayer: A New Process and Application to Surface Selective Atomic Layer Deposition

The present work demonstrates an electroless (e-less) deposition of Pb monolayer on Au and Cu surface whose morphology and properties resemble its underpotentially deposited counterpart. Our results and analysis show that the e-less Pb monolayer deposition is a surface selective, surface controlled, self-terminating process. Results also show that the electroless Pb monolayer deposition is enabling a phenomenon for new deposition method called "electroless atomic layer deposition" (e-less ALD). Here, the e-less Pb monolayer serves as reducing agent and sacrificial material in surface limited redox replacement reaction with noble metal ions such as Pt ⁿ⁺, i.e., Pt deposition. The e-less ALD is highly selective to the metal substrates at which Pb forms the e-less monolayer. The full e-less ALD cycle leads to an overall deposition of a controlled amount of the noble metal. Repetition of the two-step e-less ALD cycle an arbitrary number of times leads to formation of a highly compact, smooth, and conformal noble metal thin film with applications spanning from catalyst synthesis to semiconductor technology. The process is designed for (but not limited to) aqueous solutions that can be easily scaled up to any size and shape of the substrate, deeming its wide applications.

Preparation of an ultrathin Pt electrocatalyst via a galvanic replacement reaction of electrodeposited CuCl for the oxidation of methanol in an alkaline medium

An ultrathin and high-efficiency Pt electrocatalyst is prepared by the galvanic replacement reaction between electrodeposited CuCl and K₂PtCl₄ for alkaline methanol oxidation.