Electrocatalytic oxidation of ethylene glycol on palladium coated on 3D reduced graphene oxide aerogel paper in alkali media: Effects of carbon supports and hydrodynamic diffusion

One-pot Synthesis of PdCuAg and CeO2 Nanowires Hybrid with Abundant Heterojunction Interface for Ethylene Glycol Electrooxidation

Introducing CeO2 into Pd-based nanocatalysts for electrocatalytic reactions is a good way to solve the intermediate toxicity problem and improve the catalytic performance. Here we reported a simple strategy to synthesize the PdCuAg and CeO2 nanowires hybrid via a one-pot synthesis process under strong nanoconfined effect of specific surfactant as templates. Owing to the structural (ultrathin nanowires, abundant heterojunction/interfaces between metal and metal oxide) and compositional (Pd, Cu, Ag, CeO2) advantages, the hybrid showed significantly enhanced catalytic activity (6.06 A mgPd -1) and stability, accelerated reaction rate, and reduced activation energy toward electrocatalytic ethylene glycol oxidation reaction.

Exfoliated graphite blocks with resilience prepared by room temperature exfoliation and their application for oil-water separation

Exfoliated graphite (EG) blocks are prepared from the ultra-large flakes of graphite by intercalation of H₂SO₄ using a large amount of H₂O₂ at 5 °C and following exfoliation at 30 °C. By the exfoliation in a closed container, EG blocks with the bulk densities of 0.008-0.024 g/cm³ are successfully prepared. The resultant EG blocks have high sorption capacities for a diesel oil, up to 45 g/g. The EG blocks after oil sorption can get certain resilience for compressive stress with high reproducibility by compression-release cycles, which allows us to apply the compression-releasing for the oil sorption-desorption of the EG blocks. The performance of cyclic oil sorption-desorption by compression-releasing of EG block is compared with those of filtration and distillation. Since the resultant EG blocks had sufficient mechanical strength, the continuous removal of oil floating on the water surface is possible, exporting oil through a catheter inserted into the block and connected to a peristaltic pump. By warming up by Joule heating, even a crude oil having high viscosity can be continuously removed from the water with sufficient rate. The high hydrophobicity and lipophilicity of EG make selective removal of oil from water possible.

Wearable Motion Smartsensors Self-Powered by Core-Shell Au@Pt Methanol Fuel Cells

A wearable self-powered sensor is a promising frontier in recent flexible electronic devices. In this work, a wearable fuel cell (FC)-type self-powering motion smartsensor has been fabricated, particularly in choosing methanol vapor as a target fuel for the first time. The core-shell structure of Pt@Au/N-rGO and the porous carbon network act as methanol oxidation and oxygen reduction reaction catalysts, with a highly conductive alkaline hydrogel as a solid-state electrolyte. As a result, a wearable FC for a self-powered sensing system demonstrates excellent sensing performance toward 2-20% (v/v) methanol vapor with a maximum power density of 2.26 μW cm^-1 and good mechanical behaviors during the bending or twisting process. Significantly, this wearable FC device could power strain sensors of human motion, and real-time signals can be easily remotely detected via a cellphone. With attractive biocompatibility and self-powering performance, wearable FCs for a self-powering system would provide new opportunities for next-generation flexible smartsensing electronics and initiate a developed self-powering platform in future practical application of wearable smart monitoring.

Highly Active Hollow RhCu Nanoboxes toward Ethylene Glycol Electrooxidation

The efficient electrocatalysts toward the ethylene glycol oxidation reaction (EGOR) are highly desirable for direct ethylene glycol fuel cells because of the sluggish kinetics of anodic EGOR. Herein, porous RhCu nanoboxes are successfully prepared through facile galvanic replacement reaction and succedent sodium borohydride reduction strategy. Benefiting from hierarchical pore structure, RhCu nanoboxes display excellent electrocatalytic performance toward the EGOR in alkaline medium with a mass activity of 775.1 A g_Rh ^-1 , which is 2.8 times as large as that of commercial Rh nanocrystals. Moreover, the long-term stability of RhCu nanoboxes is better than that of commercial Rh nanocrystals. Furthermore, the theoretical calculations demonstrate that RhCu nanoboxes possess lower adsorption energy of CO and lower reaction barrier (0.27 eV) for the CO_ads oxidation with aid of the adsorbed OH_ads species, resulting in the outstanding electrocatalytic performance toward the EGOR. This work provides a meaningful reference for developing highly effective electrocatalysts toward the EGOR.

Facet-Dependent Long-Term Stability of Gold Aerogels toward Ethylene Glycol Oxidation Reaction

In this work, a series of Au_PNR^6 - 50 aerogels with different percentages of {110} facets (from ∼12 to 36%) were controllably prepared and then used to investigate their performance (specific activity and long-term stability) toward ethylene glycol oxidation reaction (EGOR), in which PNR represents the particle number ratio of 6 nm Au NPs to 50 nm Au NPs. It is found that their specific activity and long-term stability highly depend on the sum of the percentage of the {100} and {111} facets and the percentage of {110} facets, respectively. In addition, Au₂₄^6 - 50 aerogels with the highest percentage of {110} facets can possess excellent long-term stability (retaining about 95% of the initial current) but still have excellent specific activity (about 90.42 mA cm^-2). Thus, the specific activity and long-time stability of Au_PNR^6 - 50 aerogels toward EGOR can be well balanced by controlling the proper percentage of {110} facets on their surfaces. Therefore, the successful fabrication of Au_PNR^6 - 50 aerogels with greatly improved long-term stability and excellent specific activity not only provides a novel method for the design of electrocatalysts but also would boost the commercial development of direct ethylene glycol fuel cells.

Green synthesis of Pt–Pd bimetallic nanoparticle decorated reduced graphene oxide and its robust catalytic activity for efficient ethylene glycol electrooxidation

A simple one-pot green synthesis technique is developed to prepare the Pt–Pd bimetallic nanoparticles decorated reduced graphene oxide nanocomposite and its robust catalytic activity for efficient and durable ethylene glycol oxidation is realized.