High Cycling Stability of Electrochromic Devices Using a Metallic Counter Electrode

Development of Electrochromic Devices, Based on Polymeric Gel, for Energy Saving Applications

In this work, the implementation of an electrochromic device (10 cm × 10 cm in size) for energy saving applications has been presented. As electrochromic system has been used with an electrochromic solution (ECsol) made by ethyl viologen diperchlorate [EV(ClO4)2], 1,1'-diethyl ferrocene (DEFc) and propylene carbonate (PC), as solvent. The final system has been obtained by mixing the ECsol, described above, with a polymeric system made by Bisphenol-A glycerolate (1 glycerol/phenol) diacrylate (BPA) and 2,2-Dimethoxy-2-phenylacetophenone (Irgacure 651) in a weight percentage equal to 60:40% w/w, respectively. Lithography has been used to make a spacer pattern with a thickness of about 15-20 µm between the two substrates. Micro-Raman spectroscopy confirmed the presence of the EV•+ as justified by the blue color of the electrochromic device in the ON state. Electrochemical and optical properties of the electrochromic device have been studied. The device shows reversible electrochromic behavior as confirmed by cyclic color variation due to the reduction and oxidation process of the EV2+/EV•+ couple. The electrochromic device shows a variation of the % transmittance in the visible region at 400 nm of 59.6% in the OFF state and 0.48% at 3.0 V. At 606 nm the transmittance in the bleached state is 84.58% in the OFF state and then decreases to 1.01% when it is fully colored at 3.0 V. In the NIR region at 890 nm, the device shows a transmittance of 74.3% in the OFF state and 23.7% at 3.0 V while at 1165 nm the values of the transmittance changed from 83.21% in the OFF state to 1.58% in the ON state at 3.0 V. The electrochromic device shows high values of CCR% and exhibits excellent values of CE in both visible and near-infrared regions when switched between OFF/ON states. In the NIR region at 890 nm, electrochromic devices can be used for the energy-saving of buildings with a promising CE of 120.9 cm2/C and 420.1 cm2/C at 1165 nm.

Emerging Electrochromic Materials and Devices for Future Displays

With the rapid development of optoelectronic fields, electrochromic (EC) materials and devices have received remarkable attention and have shown attractive potential for use in emerging wearable and portable electronics, electronic papers/billboards, see-through displays, and other new-generation displays, due to the advantages of low power consumption, easy viewing, flexibility, stretchability, etc. Despite continuous progress in related fields, determining how to make electrochromics truly meet the requirements of mature displays (e.g., ideal overall performance) has been a long-term problem. Therefore, the commercialization of relevant high-quality products is still in its infancy. In this review, we will focus on the progress in emerging EC materials and devices for potential displays, including two mainstream EC display prototypes (segmented displays and pixel displays) and their commercial applications. Among these topics, the related materials/devices, EC performance, construction approaches, and processing techniques are comprehensively disscussed and reviewed. We also outline the current barriers with possible solutions and discuss the future of this field.

Self-Driven Infrared Electrochromic Device with Tunable Optical and Thermal Management

Electrochromic devices (ECDs) exhibiting tunable optical and thermal modulation in the infrared (IR) region have attracted extensive attention in recent years due to their attractive application prospects in both military and civilian settings. However, considering the continuous energy supply needed for driving the device operation, it is desired to develop advanced IR-ECDs with low energy consumption. Herein, a flexible self-driven IR-ECD is constructed for achieving variable optical and thermal management in a low-energy mode. In this device, a built-in potential difference of 1.36 V exists between the EC polyaniline cathode and the aluminum foil anode. Consequently, there is a rapid and obvious increase in the IR reflectance of the device after connecting the two electrodes. Such a self-driven reflectance contrast is over 20% at the wavelength of 1500 nm, and the coloration efficiency of the device reaches up to 93.6 cm² C^-1. Meanwhile, the maximum apparent temperature modulation on the surface of the device reaches up to 5.6 °C. Then, the self-driven IR-ECD could recover to its original state driven by a solar cell, indicating good reversibility and stability. We anticipate that this work may provide a new insight into developing advanced self-driven IR-ECDs for applications in dynamic military camouflage and commercial thermal control.

Toward Simplified Electrochromic Devices Using Silver as Counter Electrode Material

Novel design of electrochromic devices (ECDs) known for their ability to modify optical properties under an applied voltage, based on a minimization of the number of layers is reported. The use of a metallic electrode, playing the role of both the conductive layer and the counter electrode, allows us to simplify the assembly of a commonly five-layer battery-type device to four-layer ECD. Further minimization of the number of layers is achieved using a conductive and electrochromic material. The novelty of the device configuration is illustrated using poly(3,4-ethylenedioxythiophene) (PEDOT)-based materials as EC layer, lithium-based ionic liquid as electrolyte, and Ag as counter electrode. Such a four- or three-layer ECD deposited on paper substrate switches from light to deep blue in a narrow 0.7 V voltage window. Preliminary investigations of the mechanism indicate traces of Ag on the PEDOT layer upon cycling. Finally, the printed ECD is successfully activated using a mobile phone.