Investigation of Voltammetric Behaviour of Insecticide Chlorpyrifos on a Mercury Meniscus Modified Silver Solid Amalgam Electrode

High-Sensitivity Fluorescent Sensing Platform for Rapid and Selective Detection of Chlorpyrifos Pesticide in Water Samples Using Terbium-Isatin-3-allyl Complex

The detection of organophosphorus pesticides, particularly chlorpyrifos, in environmental samples is essential due to their widespread use and associated health risks. In this study, we developed a high-sensitivity fluorescent sensing platform utilizing an Isatin-3-allyl-terbium (IS-Tb) complex in solution for the rapid and selective detection of chlorpyrifos in various water samples. The proposed chemical structure of the complex in solution was evaluated using molar ratio method. The IS-Tb complex was characterized in solution, as it was not isolated in the solid state. To assess its structural and optical properties, several characterization techniques were employed. UV-Vis spectrophotometry was used to evaluate the absorption characteristics, and spectrofluorimetry was applied to assess the fluorescence properties. Additionally, the stoichiometry of the complex was determined using the molar ratio method, which confirmed a 1:1 ligand-to-metal ratio and provided the optimal conditions for sensing chlorpyrifos. The IS-Tb complex exhibited weak intrinsic fluorescence, which was significantly enhanced upon interaction with chlorpyrifos, enabling sensitive and quantitative analysis. Methanol was identified as the best solvent for maximizing the sensitivity of chlorpyrifos detection. The sensor demonstrated a wide linear detection range from 0.006 to 28 µg/L, with a low limit of detection (LOD) of 2 ng/L. The sensor's selectivity for chlorpyrifos over other commonly encountered pesticides (13 organophosphorus) and environmental contaminants was high, ensuring minimal interference. The performance of the sensor was validated using spiked water samples, yielding an average recovery of 101% with a relative standard deviation (RSD) of less than 5%. These results suggest that the proposed sensing platform is a powerful tool for the environmental monitoring of chlorpyrifos, with significant implications for public health protection and regulatory compliance.

Recent advancements in non-enzymatic electrochemical sensor development for the detection of organophosphorus pesticides in food and environment

Organophosphorus Pesticides (OPPs) are among the extensively used pesticides throughout the world to boost agricultural production. However, persistent residues of these toxic pesticides in various vegetables, fruits, and drinking water poses detrimental health effects. Consequently, the rapid monitoring of these harmful chemicals through simple and cost-effective methods has become crucial. In such an instance, electrochemical methods offer simple, rapid, sensitive, reproducible, and affordable detection pathways. To overcome the limitations associated with electrochemical enzymatic sensors, non-enzymatic sensors have emerged as promising and simpler alternatives. The non-enzymatic sensors have demonstrated superior activity, reaching detection limit up to femto (10-15) molar concentration in recent years, leveraging higher selectivity obtained through the molecularly imprinted polymers, synergistic effects between carbonaceous nanomaterials and metals, metal oxide alloys, and other alternative approaches. Herein, this review paper provides an overview of the recent advancements in the development of non-enzymatic electrochemical sensors for the detection of commonly used OPPs, such as Chlorpyrifos (CHL), Diazinon (DZN), Malathion (MTN), Methyl parathion (MP) and Fenthion (FEN). The design method of the electrodes, electrode functioning mechanism, and their analytical performance metrics, such as limit of detection, sensitivity, selectivity, and linearity range, were reviewed and compared. Furthermore, the existing challenges within this rapidly growing field were discussed along with their potential solutions which will facilitate the fabrication of advanced and sustainable non-enzymatic sensors in the future.

Dual-mode supramolecular fluorescent probe for rapid and on-site detection of chlorpyrifos in the environment

Chlorpyrifos (CPF) as a classic organophosphorus pesticide has been widely used in agricultural applications to control insects and worms. CPF in the environment can cause deaths of diverse kinds of aquatic organism and bring a high risk to human health. Therefore, the development of effective analytical method for CPF is of great importance. In this work, a novel dual-mode albumin (ALB)-based supramolecular probe FD@ALB was designed and prepared for rapid detection of CPF in the environment. The limit of detection is 0.57 μM (∼ 0.2 ppm) with a wider detection range up to 200 μM, which is satisfactory for application. The sensing mechanism can be ascribed to CPF-induced phosphorylation of ALB, thus leading to a change in the binding microenvironment of FD dye. Moreover, the paper-based test strips were used in conjunction with the FD@ALB, realizing the portable detection of CPF. This method was demonstrated to be suitable for on-site detection of CPF in various kinds of environmental samples, including water, soil, and food samples, with the aid of a smartphone. To the best of our knowledge, this is the first analytical method achieving a combination of the rapid and ratiometric detection of CPF in the environment.

Thioglycolic acid-modified AuNPs as a colorimetric sensor for the rapid determination of the pesticide chlorpyrifos

Herein, we report the preparation of a gold nanoparticle-thioglycolic acid (TGA@AuNP) suspension for the label-free colorimetric detection of the organophosphorus pesticide chlorpyrifos. This colorimetric sensor was synthesized by a one-pot method, providing thioglycolic acid (TGA)-modified gold nanoparticles with a negatively charged surface. The formation of TGA@AuNPs was confirmed by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and dynamic light scattering (DLS). In addition, chlorpyrifos was quantitatively determined by UV-vis spectrophotometry. The modification time, TGA concentration, pH, incubation time, temperature, ionic strength, and interference of other pesticides were also investigated. The synthesized TGA@AuNP colorimetric sensor possesses a detection limit as low as 20 μg L^-1 and a selective sensing response, and the detection time is less than 2 minutes. In addition, this method can also be applied to detect various practical samples in life, such as environmental water samples and tea.

Electrochemical study and simultaneous voltammetric determination of contraceptives ethinylestradiol and cyproterone acetate using silver nanoparticles solid amalgam electrode and cationic surfactant

In this work we propose the voltammetric analysis of contraceptive hormones ethinylestradiol (EE) and cyproterone acetate (CPA) using solid amalgam electrode fabricated with silver nanoparticles. To the best of our knowledge, this is the first report describing the simultaneous determination of these two compounds and also the first report of the use of amalgam electrode for analysis of EE and CPA. The voltammetric behavior of both substances was investigated by their reduction. An irreversible electrochemical process involving two protons and two electrons was found for each compound. The analytical assays were carried out using staircase voltammetry (SCV). Due to this, aiming to improve the analytical sensitivity, the cationic surfactant cetyltrimethylammonium bromide was also used. The instrumental and experimental parameters were studied and optimized to achieve the best conditions for the analysis. Under the optimum conditions, the voltammetric signals of EE and CPA showed dependence on the concentration range from 6.4 × 10^-7 to 7.8 × 10^-6 mol L^-1 and from 1.0 × 10^-6 to 1.0 × 10^-5 mol L^-1, respectively. The limits of detection obtained were 1.03 × 10^-7 mol L^-1 for EE and 2.99 × 10^-7 mol L^-1 for CPA. The analytical usefulness of the method was evaluated through its application on the simultaneous determination of EE and CPA in pharmaceutical formulations and urine samples. The two analytes were successfully quantified in these samples with good precision and the values found presented satisfactory concordance with the reference values, suggesting acceptable analytical efficiency for the approach described here.

An Analytical Survey of Trace Heavy Elements in Insecticides

There are many types of insecticides traded in the local and international markets, which vary depending on the type of target insect (e.g., whether crawling or flying). This paper aimed to assess the concentration of trace elements present in the various pesticide formulations (solid, liquid, and gaseous). This study was conducted in two groups: the first group was comprised of zinc, copper, iron, chromium, phosphorus, selenium, and cobalt; the second group included four heavy toxic elements (arsenic, thallium, lead, and mercury). These elements were analyzed by inductively coupled plasma/optical emission spectrometry (ICP-OES).