Electrochemical Studies on Corncob Derived Activated Porous Carbon for Supercapacitors Application in Aqueous and Non-aqueous Electrolytes

Oil palm leaf-derived hierarchical porous carbon for "water-in-salt" based supercapacitors: the effect of anions (Cl- and TFSI-) in superconcentrated conditions

This study investigates the use of a hierarchical porous carbon electrode derived from oil palm leaves in a "water-in-salt" supercapacitor. The impact of anion identity on the electrical performance of the carbon electrode was also explored. The results show that the prepared carbon had a hierarchical porous structure with a high surface area of up to 1840 m2 g-1. When a 20 m LiTFSI electrolyte was used, the carbon electrode had a specific capacitance of 176 F g-1 with a wider potential window of about 2.6 V, whereas the use of a cheaper 20 m LiCl electrolyte showed a higher specific capacitance of 331 F g-1 due to the smaller size of the Cl- anion, which enabled inner capacitance. Therefore, the anion identity has an effect on the electrochemical performance of porous carbon, and this research contributes to the understanding of using "water-in-salt" electrolytes in carbon-based supercapacitors. The study's findings provide insights into developing low-cost, high-performance supercapacitors that can operate in a wider voltage range.

Activated Biocarbon from Paper Mill Sludge as Electrode Material for Supercapacitors: Comparative Performance Evaluation in Two Aqueous Electrolytes

The valorization of a South African paper mill waste sludge into an activated biocarbon electrode material for energy storage application is reported. The valorization method is a two-step synthesis that comprises hydrothermal carbonization and NaOH activation of paper mill waste at 700 °C to produce activated biocarbon. The development of high porosity carbon material with a surface area of 1139 m²/g was observed. The synthesized biocarbon electrode exhibited good specific capacitance (C _sp) values of 206 and 157 Fg^-1, from a three-electrode cell in neutral (1 M Na₂SO₄) and alkali (3 M KOH) electrolytes, respectively. The electrolyte concentration purportedly has a considerable effect on specific capacitance. In both electrolytes, symmetric triangular curves in galvanostatic charge-discharge point to a quick charge-discharge process. Synthesized material testing with a two-electrode cell in 3 M KOH and 1 M Na₂SO₄ electrolytes, respectively, delivered specific capacitances of 125 and 152 Fg^-1, with the corresponding energy densities of 17.4 and 21.1 Wh kg^-1. The material had capacity retention efficiencies of 83 and 92% after 5000 cycles in 3 M KOH and 1 M Na₂SO₄ electrolytes, respectively. The electrode material performance of the activated biocarbon from paper sludge clearly shows its potential for electrochemical energy storage. The reported results present an exciting potential contribution of the pulp and paper industry toward the transition to green energy.

Controllable Preparation of Eucommia Wood-Derived Mesoporous Activated Carbon as Electrode Materials for Supercapacitors

Activated carbons (ACs) for supercapacitors were synthesized from Eucommia ulmoides Oliver (EUO) wood by H₃PO₄ with systemic activation processes. The target structure of ACs could be prepared by adjusting the technological parameters. As the H₃PO₄ concentration was 25%, the mass ratio of feedstocks to activator was 1:4, the activation time was 6 h, and the activation temperature was 400 °C, the obtained AC revealed a high specific surface area (2033.87 m²·g^-1) and well-developed mesoporous (the rate of mesoporous was 96.4%) with the best economic feasibility. Besides, it possessed excellent electrochemical performance: the maximum specific capacitance reached up to 252 F·g^-1, the charging and discharging period was 3098.2 s at 0.2 A·g^-1, and the retention rate of specific capacitance reached 92.3% after 10,000 cycles. This low temperature and convenience technology provide a valuable reference for synthesizing the EUO-based ACs, making high-value utilization on the EUO branches, and owning a broad application prospect in supercapacitors.

Biomass Nanoarchitectonics for Supercapacitor Applications

Nanoarchitectonics integrates nanotechnology with numerous scientific disciplines to create innovative and novel functional materials from nano-units (atoms, molecules, and nanomaterials). The objective of nanoarchitectonics concept is to develop functional materials and systems with rationally architected functional units. This paper explores the progress and potential of this field using biomass nanoarchitectonics for supercapacitor applications as examples of energetic materials and devices. Strategic design of nanoporous carbons that exhibit ultra-high surface area and hierarchically pore architectures comprising micro- and mesopore structure and controlled pore size distributions are of great significance in energy-related applications, including in high-performance supercapacitors, lithium-ion batteries, and fuel cells. Agricultural wastes or natural biomass are lignocellulosic materials and are excellent carbon sources for the preparation of hierarchically porous carbons with an ultra-high surface area that are attractive materials in high-performance supercapacitor applications due to high electrical and ion conduction, extreme porosity, and exceptional chemical and thermal stability. In this review, we will focus on the latest advancements in the fabrication of hierarchical porous carbon materials from different biomass by chemical activation method. Particularly, the importance of biomass-derived ultra-high surface area porous carbons, hierarchical architectures with interconnected pores in high-energy storage, and high-performance supercapacitors applications will be discussed. Finally, the current challenges and outlook for the further improvement of carbon materials derived from biomass or agricultural wastes in the advancements of supercapacitor devices will be discussed.

Regeneration and usage of commercial activated carbon from the waste electrodes for the application of supercapacitors

Currently, efficient and cost-effective recycling of waste capacitors is a pressing issue. In this study, the recovery of electrode powder from waste supercapacitors and enabling the reuse of the prepared samples are reported. The recovered powder is directly activated by mixing it with KOH using chemical activation to regenerate the waste-activated carbon. The regenerated activated carbon's specific surface area could be restored to a level similar to that of the original commercial powder, reaching 1803.15 m²/g. The regenerated activated carbon has a high proportion of microporous, which played a crucial role in its electrochemical performance. The samples' capacity in the organic system reached 125.96 F/g at 0.2 A/g and 111.77 F/g at 20 A/g, with a retention rate of 88.74%. Furthermore, the capacitance was maintained at 91.18% after 10,000 cycles, showing good cycling performance. Additionally, the supercapacitor assembled from the regenerated activated carbon delivered a high energy density of 31.83 Wh/kg and a power density of 269.76 W/kg, indicating great application potential. Overall, this study offers a useful and low-cost approach for recycling activated carbon from waste electrodes, which would be possible for supercapacitors recycling.

Biochar for agronomy, animal farming, anaerobic digestion, composting, water treatment, soil remediation, construction, energy storage, and carbon sequestration: a review

In the context of climate change and the circular economy, biochar has recently found many applications in various sectors as a versatile and recycled material. Here, we review application of biochar-based for carbon sink, covering agronomy, animal farming, anaerobic digestion, composting, environmental remediation, construction, and energy storage. The ultimate storage reservoirs for biochar are soils, civil infrastructure, and landfills. Biochar-based fertilisers, which combine traditional fertilisers with biochar as a nutrient carrier, are promising in agronomy. The use of biochar as a feed additive for animals shows benefits in terms of animal growth, gut microbiota, reduced enteric methane production, egg yield, and endo-toxicant mitigation. Biochar enhances anaerobic digestion operations, primarily for biogas generation and upgrading, performance and sustainability, and the mitigation of inhibitory impurities. In composts, biochar controls the release of greenhouse gases and enhances microbial activity. Co-composted biochar improves soil properties and enhances crop productivity. Pristine and engineered biochar can also be employed for water and soil remediation to remove pollutants. In construction, biochar can be added to cement or asphalt, thus conferring structural and functional advantages. Incorporating biochar in biocomposites improves insulation, electromagnetic radiation protection and moisture control. Finally, synthesising biochar-based materials for energy storage applications requires additional functionalisation.

Bio-Derived Carbon with Tailored Hierarchical Pore Structures and Ultra-High Specific Surface Area for Superior and Advanced Supercapacitors

We report here on a hollow-fiber hierarchical porous carbon exhibiting an ultra-high specific surface area, synthesized by a facile method of carbonization and activation, using the Metaplexis Japonica (MJ) shell. The Metaplexis Japonica-based activated carbon demonstrated a very high specific surface area of 3635 m² g^-1. Correspondingly, the derived carbonaceous material delivers an ultra-high capacitance and superb cycle life in an alkaline electrolyte. The pore-ion size compatibility is optimized using tailored hierarchical porous carbon and different ion sized organic electrolytes. In ionic liquids nonaqueous based electrolytes we tailored the MJ carbon pore structure to the electrolyte ion size. The corresponding supercapacitor shows a superior rate performance and low impedance, and the device records specific energy and specific power densities as high as 76 Wh kg^-1 and 6521 W kg^-1, as well as a pronounced cycling durability in the ionic liquid electrolytes. Overall, we suggest a protocol for promising carbonaceous electrode materials enabling superior supercapacitors performance.

Optimization of process parameters of self-purging microwave pyrolysis of corn cob for biochar production

Microwave pyrolysis offers rapid and low-cost technology to upgrade agro-forestry residues to high-value products. I-optimal experimental design was used to determine the optimal combination of microwave power and exposure time to maximize biochar yield from corn cob. A validation experiment at optimal conditions of 600 W and 6.9 min produced an average yield of 56.98% on a dry and ash-free basis, agrees with the predicted value (3.43% error) and confirms the adequacy of the model yield equation. Characterization of biochar product revealed an organized mesoporous structure with a carbon content of 62.68%, surface area of 3.05 m2/g, pore volume of 0.003 cm3/g, capacitance range of 27.14-53.99 μF/g, energy density range of 6.0 × 10-7 - 1.2 × 10-6 Wh/kg, and power density range of 9.4 × 10-4 - 2.49 × 10-3 W/kg. The biochar produced would require further process to be considered for various industrial applications.

Hierarchical Porous Catalytic Pyrolysis Char Derived from Oily Sludge for Enhanced Adsorption

A novel pyrolysis char (PC), prepared by H3PO4 catalytic pyrolysis of oily sludge (OS), was presented to remove methylene blue (MB) dye from aqueous solution for the first time. The optimal preparation conditions (catalytic pyrolysis temperature of 411 °C, H3PO4 impregnation ratio of 2.44, and catalytic pyrolysis time of 59 min) were predicted by the response surface methodology. The optimal PC exhibited favorable hierarchical porous properties, which brought a large adsorption capability (322.89 mg/g). The adsorption process fitted well with the Langmuir model and pseudo-second order model. In addition, thermodynamic parameters showed that the adsorption process was endothermic (ΔH 0 > 0) and spontaneous (ΔG 0 < 0). The adsorption capability was strongly influenced by coexisting metal ions due to the competitive adsorption effect. The inhibition for MB adsorption was arranged in the following order: Al3+ > Fe3+ > Mg2+ > Ca2+ > K+ > Na+. The adsorption mechanism of MB onto the OS-derived PC includes pore filling, π-π interactions, and electrostatic interactions. The as-obtained PC adsorbent exhibited good reusability performance, which leads to great potential in practical application for wastewater treatment.

Nature inspired approach to mimic design for increased specific capacitance as supercapacitor electrodes

In this study, the experiment was conducted assuming that the citrus fruits were contaminated with bacteria. Herein, orange peels (OP) and lemon peels (LP) can be used as a carbon source and have the advantage of using discarded materials and heteroatoms. Also, the nitrogen heteroatom is introduced by naturally doping the materials with bacteria (Escherichia Coli, E. coli). The as-prepared bacteria doped activated carbon showed an increase in nitrogen content and surface properties which led to an improvement in electrochemical properties. The specific capacitance of bacteria doped OP and LP was 92.4 and 139 Fg^-1 compared to the bare samples with a specific capacitance of 60.9 and 49.6 Fg^-1 at a current density of 0.2Ag^-1 and capacity retention of 129% after 10,000 cycles for the bacteria-doped samples. This process which is simple, cheap, and environmentally friendly can be applied to discarded fruit peels for the fabrication of supercapacitor materials.

Materials, Electrical Performance, Mechanisms, Applications, and Manufacturing Approaches for Flexible Strain Sensors

With the recent great progress made in flexible and wearable electronic materials, the upcoming next generation of skin-mountable and implantable smart devices holds extensive potential applications for the lifestyle modifying, including personalized health monitoring, human-machine interfaces, soft robots, and implantable biomedical devices. As a core member within the wearable electronics family, flexible strain sensors play an essential role in the structure design and functional optimization. To further enhance the stretchability, flexibility, sensitivity, and electricity performances of the flexible strain sensors, enormous efforts have been done covering the materials design, manufacturing approaches and various applications. Thus, this review summarizes the latest advances in flexible strain sensors over recent years from the material, application, and manufacturing strategies. Firstly, the critical parameters measuring the performances of flexible strain sensors and materials development contains different flexible substrates, new nano- and hybrid- materials are introduced. Then, the developed working mechanisms, theoretical analysis, and computational simulation are presented. Next, based on different material design, diverse applications including human motion detection and health monitoring, soft robotics and human-machine interface, implantable devices, and biomedical applications are highlighted. Finally, synthesis consideration of the massive production industry of flexible strain sensors in the future; different fabrication approaches that are fully expected are classified and discussed.

Switching the solubility of electroactive ionic liquids for designing high energy supercapacitor and low potential biosensor

Ionic liquids are regarded as one of the most prodigious materials for sustainable technological developments with superior performance and versatility. Hence, in this study, we have reported the design and synthesis of electroactive disubstituted ferrocenyl ionic liquids (Fc-ILs) with two different counter anions and demonstrated the significance of their anion tuneable physicochemical characteristics towards multifunctional electrochemical applications. The Fc-IL synthesized with chloride counter anion (Fc-Cl-IL) displays water-solubility and can be used as a redox additive in the fabrication of supercapacitor. Supercapacitor device with Fc-Cl-IL based redox electrolyte exhibits outstanding energy and power densities of 91 Wh kg^-1 and 20.3 kW kg^-1, respectively. Meanwhile, ferrocenyl IL synthesized with perchlorate anion (Fc-ClO₄-IL) exhibits water-insolubility and can serve as a redox mediator towards construction of a glucose biosensor. The biosensor comprising Fc-ClO₄-IL is able to detect glucose at an exceptionally lower potential of 0.2 V, with remarkable sensitivity and selectivity. This study implies that the introduction of electroactive ILs could afford supercapacitor devices with high energy and power densities and biosensors with less detection potential.

Current Research of Graphene-Based Nanocomposites and Their Application for Supercapacitors

This review acmes the latest developments of composites of metal oxides/sulfide comprising of graphene and its analogues as electrode materials in the construction of the next generation of supercapacitors (SCs). SCs have become an indispensable device of energy-storage modes. A prompt increase in the number of scientific accomplishments in this field, including publications, patents, and device fabrication, has evidenced the immense attention they have attracted from scientific communities. These efforts have resulted in rapid advancements in the field of SCs, focusing on the development of electrode materials with features of high performance, economic viability, and robustness. It has been demonstrated that carbon-based electrode materials mixed with metal oxides and sulfoxides can perform extremely well in terms of energy density, durability, and exceptional cyclic stability. Herein, the state-of-the-art technologies relevant to the fabrication, characterization, and property assessment of graphene-based SCs are discussed in detail, especially for the composite forms when mixing with metal sulfide, metal oxides, metal foams, and nanohybrids. Effective synthetic methodologies for the nanocomposite fabrications via intercalation, coating, wrapping, and covalent interactions will be reviewed. We will first introduce some fundamental aspects of SCs, and briefly highlight the impact of graphene-based nanostructures on the basic principle of SCs, and then the recent progress in graphene-based electrodes, electrolytes, and all-solid-state SCs will be covered. The important surface properties of the metal oxides/sulfides electrode materials (nickel oxide, nickel sulfide, molybdenum oxide, ruthenium oxides, stannous oxide, nickel-cobalt sulfide manganese oxides, multiferroic materials like BaMnF, core-shell materials, etc.) will be described in each section as per requirement. Finally, we will show that composites of graphene-based electrodes are promising for the construction of the next generation of high performance, robust SCs that hold the prospects for practical applications.

Fatsia Japonica-Derived Hierarchical Porous Carbon for Supercapacitors With High Energy Density and Long Cycle Life

Fatsia Japonica seed, which is mainly composed of glucose, has potential as a porous carbon matrix precursor for supercapacitors that can achieve high-value utilization. Cost-effective hierarchical porous carbon materials (HPC) were prepared from Fatsia Japonica by annealing at high temperature. The pore size and distribution of the HPC can be precisely controlled and adjusted by altering the activation temperature. The HPC obtained at 600°C showed favorable features for electrochemical energy storage, with a surface area of 870.3 m2/g. The HPC for supercapacitors (a three-electrode system) exhibited good specific capacitance of 140 F/g at a current density of 1 A/g and a long cycling life stability (87.5% remained after 10,000 cycles). In addition, the HPC electrode showed an excellent energy density of 23 Wh/Kg. Such hierarchical porous biomass-derived carbon would be a good candidate for application in the electrodes of supercapacitors due to its simple preparation process and the outstanding electrochemical performance.

Hydrothermal synthesis of cobalt telluride nanorods for a high performance hybrid asymmetric supercapacitor

Cobalt telluride nanostructured materials have demonstrated various applications, particularly in energy generation and storage. A high temperature and reducing atmosphere are required for the preparation of cobalt telluride-based materials, which makes this a difficult and expensive process. The development of a facile route for producing the desirable nanostructure of cobalt telluride remains a great challenge. We demonstrated a simple hydrothermal method for preparing cobalt telluride nanorods (CoTe NRs) and telluride nanorods (Te NRs) for supercapacitor applications. The morphology of CoTe NRs and Te NRs was analyzed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The prepared CoTe NR electrode material exhibited a high specific capacity of 170 C g⁻¹ at a current density of 0.5 A g⁻¹ with an exceptional cyclic stability. The asymmetric supercapacitor was assembled using CoTe NRs and orange peel-derived activated carbon (OPAA-700) as a positive and negative electrode, respectively. The fabricated device delivered a high energy density of 40.7 W h kg⁻¹ with a power density of 800 W kg⁻¹ at 1 A g⁻¹ current density. When the current density was increased to 30 A g⁻¹, the fabricated device delivered a high power density of 22.5 kW kg⁻¹ with an energy density of 16.3 W h kg⁻¹. The fabricated asymmetric supercapacitor displayed a good cyclic stability performance for 10 000 cycles at a high current density of 30 A g⁻¹ and retained 85% of its initial capacity for after 10 000 cycles. The prepared materials indicate their applicability for high performance energy storage devices.

A one-step hydrothermal derived cobalt telluride nanorods and activated carbon-based hybrid asymmetric supercapacitor delivered a high energy (40.7 W h kg⁻¹) and power density (22.5 kW kg⁻¹) with an electrochemical stability of 85% for 10000 cycles.

Waste Toner-Derived Carbon/Fe3O4 Nanocomposite for High-Performance Supercapacitor

Electronic waste management is one of the key challenges for the green revolution without affecting the environment. The wide use of printer devices has brought a horde of discarded waste toner, which release ∼6000 tons of processed carbon powder into the atmosphere every year that would essentially pollute the atmosphere. Here, we propose a one-step thermal conversion of waste toner powder into carbon/Fe₃O₄ nanocomposites for energy storage applications. Recovered toner carbon (RTC) and toner carbon calcined at 300 °C (RTC-300) were characterized using various analytical tools. From the FE-SEM analysis, the presence of carbon particles with uniformly decorated Fe₃O₄ nanoparticles was confirmed. RTC-300 carbon was used as an electrode material for supercapacitors, and it exhibited a high specific capacitance of 536 F/g at a current density of 3 A/g, which is almost six times higher than that of the commercial mesoporous graphitized carbon black. RTC-300 showed excellent electrochemical stability of 97% over 5000 cycles at a high current density of 20 A/g. The fabricated symmetric cell using RTC-300 electrode materials in an aqueous electrolyte with a cell voltage of 1.8 V delivered a high energy and high-power density of 42 W h/kg and 14.5 kW/kg, respectively. The fabricated device is stable up to 20,000 cycles at a high current density of 20 A/g with a loss of 23% capacitance.

High performance supercapacitors using lignin based electrospun carbon nanofiber electrodes in ionic liquid electrolytes

Flexible, free standing and binder-free electrodes were fabricated by electrospinning from a series of lignin: polyvinyl alcohol (PVA) polymer blends, followed by heat treatment. PVA has the dual function of facilitating the electrospinning of lignin and acting as a sacrificial polymer. Upon stabilization, carbonization and CO₂ activation, carbon nanofibers (ACNF) derived from the lignin:PVA 80:20 blend displayed a high surface area of 2170 m² g^-1 and a mesopore volume of 0.365 cm³ g^-1. ACNFs derived from all the compositions show high degrees of graphitization based on Raman analysis. Pyr₁₄TFSI ionic liquid (IL), modified by mixing with propylene carbonate and ethylene carbonate to reduce the viscosity and increase the ionic conductivity, was used as a high-performance electrolyte. The resulting IL mixture exhibited a four-fold increase in ionic conductivity compared to the neat IL Coin cell supercapacitors using electrodes derived from lignin:PVA 80:20 blends and this electrolyte displayed 87 F g^-1 specific capacitance and 38 Wh kg^-1 energy density which is the highest reported energy density for lignin:PVA blends to date.

Isosteric Heat: Comparative Study between Clausius–Clapeyron, CSK and Adsorption Calorimetry Methods

This work presents the calorimetric study of five adsorbents with different chemical and textural characteristics: MOF-199, MCM-41, SBA-15, activated carbon prepared from corn cob (GACKP) and graphite. These solids were used to establish the differences between isosteric heats evaluated by three different methods: Clausius–Clapeyron (C-C), Chakraborty, Saha and Koyama (CSK) and Adsorption Calorimetry (A-Cal). The textural characterization results show solids that have values of specific surface area between 2271 m2·g−1 for the MOF-199 and 5.2 m2·g−1 for the graphite. According to the results obtained for the isosteric heats for each sample, the magnitude varies depending on the coverage of the adsorbate and the textural characteristics of each adsorbent. Solids with an organized structure have isosteric heat values that are coincident among the three methods. Meanwhile, heterogeneous solids such as activated carbon values evaluated by the CKS and C-C have a high dispersion method regarding the adsorption calorimetry method. The results obtained show that the adsorption calorimetry, being a direct experimental measurement method, presents less dispersed data. At low quantities, the isosteric heat of nitrogen adsorption decreased in the order MOF-199, GACKP, MCM-41, SBA-15 and Graphite. The order for the isosteric heats values was coherent with the surface characteristics of each of the solids, especially with the pore size distribution. Finally, throughout the coverage examined in this work, the isosteric heats for nitrogen adsorption determined by adsorption calorimetry (A-Cal) were larger than the evaluated by C-C and CSK indirect methods of vaporization. According to the results, it is shown that the adsorption calorimetry allows values of the isosteric heats of adsorption with an error of less than 2% to be established and also reveals the complex nature of the heterogeneity or homogeneity of the adsorbent.

Advanced Carbon for Flexible and Wearable Electronics

Flexible and wearable electronics are attracting wide attention due to their potential applications in wearable human health monitoring and care systems. Carbon materials have combined superiorities such as good electrical conductivity, intrinsic and structural flexibility, light weight, high chemical and thermal stability, ease of chemical functionalization, as well as potential mass production, enabling them to be promising candidate materials for flexible and wearable electronics. Consequently, great efforts are devoted to the controlled fabrication of carbon materials with rationally designed structures for applications in next-generation electronics. Herein, the latest advances in the rational design and controlled fabrication of carbon materials toward applications in flexible and wearable electronics are reviewed. Various carbon materials (carbon nanotubes, graphene, natural-biomaterial-derived carbon, etc.) with controlled micro/nanostructures and designed macroscopic morphologies for high-performance flexible electronics are introduced. The fabrication strategies, working mechanism, performance, and applications of carbon-based flexible devices are reviewed and discussed, including strain/pressure sensors, temperature/humidity sensors, electrochemical sensors, flexible conductive electrodes/wires, and flexible power devices. Furthermore, the integration of multiple devices toward multifunctional wearable systems is briefly reviewed. Finally, the existing challenges and future opportunities in this field are summarized.

Supercapacitor Energy Storage Device Using Biowastes: A Sustainable Approach to Green Energy

The demand for renewable energy sources worldwide has gained tremendous research attention over the past decades. Technologies such as wind and solar have been widely researched and reported in the literature. However, economical use of these technologies has not been widespread due partly to cost and the inability for service during of-source periods. To make these technologies more competitive, research into energy storage systems has intensified over the last few decades. The idea is to devise an energy storage system that allows for storage of electricity during lean hours at a relatively cheaper value and delivery later. Energy storage and delivery technologies such as supercapacitors can store and deliver energy at a very fast rate, offering high current in a short duration. The past decade has witnessed a rapid growth in research and development in supercapacitor technology. Several electrochemical properties of the electrode material and electrolyte have been reported in the literature. Supercapacitor electrode materials such as carbon and carbon-based materials have received increasing attention because of their high specific surface area, good electrical conductivity and excellent stability in harsh environments etc. In recent years, there has been an increasing interest in biomass-derived activated carbons as an electrode material for supercapacitor applications. The development of an alternative supercapacitor electrode material from biowaste serves two main purposes: (1) It helps with waste disposal; converting waste to a useful product, and (2) it provides an economic argument for the substantiality of supercapacitor technology. This article reviews recent developments in carbon and carbon-based materials derived from biowaste for supercapacitor technology. A comparison between the various storage mechanisms and electrochemical performance of electrodes derived from biowaste is presented.

Corncob-derived hierarchical porous carbons constructed by re-activation for high-rate lithium-ion capacitors

Hierarchical porous activated carbons (HPACs) possess unique bimodal pore structures, containing micropores for charge storage and mesopores for ion migration.

Coupled ultrasonication-milling synthesis of hierarchically porous carbon for high-performance supercapacitor

Activated carbon (AC) based supercapacitors exhibit intrinsic advantages in energy storage. Traditional two-step synthesis (carbonization and activation) of AC faces difficulties in precisely regulating its pore-size distribution and thoroughly removing residual impurities like silicon oxide. This paper reports a novel coupled ultrasonication-milling (CUM) process for the preparation of hierarchically porous carbon (HPC) using corn cobs as the carbon resource. The as-obtained HPC is of a large surface area (2288 m² g^-1) with a high mesopore ratio of ∼44.6%. When tested in a three-electrode system, the HPC exhibits a high specific capacitance of 465 F g^-1 at 0.5 Ag^-1, 2.7 times higher than that (170 F g^-1) of the commercial AC (YP-50F). In the two-electrode test system, the HPC device exhibits a specific capacitance of 135 F g^-1 at 1 A g^-1, twice higher than that (68 F g^-1) of YP-50F. The above excellent energy-storage properties are resulted from the CUM process which efficiently removes the impurities and modulates the mesopore/micropore structures of the AC samples derived from the agricultural resides of corn cobs. The CUM process is an efficient method to prepare high-performance biomass-derived AC materials.

Design and Preparation of Biomass-Derived Carbon Materials for Supercapacitors: A Review

The synthesis and application of biomass-derived carbon in energy storage have drawn increasing research attention due to the ease of fabrication, cost-effectiveness, and sustainability of the meso/microporous carbon produced from various biological precursors, including plants, fruits, microorganisms, and animals. Compared to the artificial nanostructured carbons, such as fullerene, carbon nanotube and graphene, the biomass-derived carbons may obtain superior capacitance, rate performance and stability in supercapacitor applications ascribing to their intrinsic nanoporous and hierarchical structures. However, challenges remain in processing techniques to obtain biomass-derived carbons with high carbon yield, high energy density, and controllable graphitic microstructures, which may require a clear understanding over the chemical and elemental compositions, and the intrinsic microstructural characteristics of the biological precursors. Herein we present comprehensive analyses over the impacts of the chemical and elemental compositions of the precursors on the carbon yield of the biomass, as well as the mechanism of chemical activation on the nanoporous structure development of the biomass-derived carbons. The structure–property relationship and functional performance of various biomass-derived carbons for supercapacitor applications are also discussed in detail and compared. Finally, useful insights are also provided for the improvements of biomass-derived carbons in supercapacitor applications.

Scalable 2D Hierarchical Porous Carbon Nanosheets for Flexible Supercapacitors with Ultrahigh Energy Density

2D carbon nanomaterials such as graphene and its derivatives, have gained tremendous research interests in energy storage because of their high capacitance and chemical stability. However, scalable synthesis of ultrathin carbon nanosheets with well-defined pore architectures remains a great challenge. Herein, the first synthesis of 2D hierarchical porous carbon nanosheets (2D-HPCs) with rich nitrogen dopants is reported, which is prepared with high scalability through a rapid polymerization of a nitrogen-containing thermoset and a subsequent one-step pyrolysis and activation into 2D porous nanosheets. 2D-HPCs, which are typically 1.5 nm thick and 1-3 µm wide, show a high surface area (2406 m² g^-1 ) and with hierarchical micro-, meso-, and macropores. This 2D and hierarchical porous structure leads to robust flexibility and good energy-storage capability, being 139 Wh kg^-1 for a symmetric supercapacitor. Flexible supercapacitor devices fabricated by these 2D-HPCs also present an ultrahigh volumetric energy density of 8.4 mWh cm^-3 at a power density of 24.9 mW cm^-3 , which is retained at 80% even when the power density is increased by 20-fold. The devices show very high electrochemical life (96% retention after 10000 charge/discharge cycles) and excellent mechanical flexibility.

Hierarchical porous carbon obtained from frozen tofu for efficient energy storage

A supercapacitor made up of carbon from frozen tofu could readily power 25 red LEDs in parallel for more than 2 min after being charged for 25 s.

Preparation of nitrogen-doped porous carbons for high-performance supercapacitor using biomass of waste lotus stems

In this study, advanced nitrogen-doped porous carbon materials for supercapacitor was prepared using low-cost and environmentally friendly waste lotus stems (denoted as LS-NCs). Nitrogen in the surface functionalities of LS-NCs was investigated using X-ray photoelectron spectroscopy analysis. The sum of pyridine nitrogen (N-6) and pyrrolic/pyridinic (N-5) contents accounted for 94.7% of the total nitrogen and significantly contributed to conductivity. Pore structure and surface area of activated carbons were measured using the Brunauer–Emmett–Teller method. A maximum specific surface area of 1322 m² g⁻¹ was achieved for LS-NCs. The porous carbons exhibited excellent electrochemical properties with a specific capacitance of 360.5 F g⁻¹ at a current density of 0.5 A g⁻¹ and excellent cycling stability (96% specific capacitance retention after 5000 cycles). The above findings indicate that taking advantage of the unique structure of abundant waste lotus stem provides a low-cost and feasible design for high-performance supercapacitors.

In this study, advanced nitrogen-doped porous carbon materials for supercapacitor was prepared using low-cost and environmentally friendly waste lotus stems (denoted as LS-NCs).