Anthraquinone modification of microporous carbide derived carbon films for on-chip micro-supercapacitors applications

Experimental Investigation of Electrochemical Capacitive Responses versus Pore Geometries through Artificial Nanotubes

Electrochemical supercapacitors have attracted significant attention due to their large capacity, high-power output, and long cycle life. However, despite extensive studies and advancements in developing highly porous electrode materials, little quantitative research on the impact of pore geometry on electrochemical responses has been conducted. This paper presents the first quantitative investigation of the relationship between electrochemical capacitive responses and pore geometries at the nanoscale. To achieve this, we constructed a uniform cylindrical pore array with controllable pore diameter and depth by using anodized aluminum oxide (AAO) to serve as a template and atomic layer deposition (ALD) technology for TiN conductive layer decoration. Our findings reveal that, at the nanoscale, increasing the specific surface area through pore diameter and depth does not proportionally increase the capacitive response, even at low scan rates. Meanwhile, we observe a critical pore parameter (170/5000 nm, diameter/depth), where the specific capacitance density and characteristic frequency dramatically decrease with a further increase in the pore aspect ratio. These results indicate that blindly pursuing the absolute specific surface area of the electrode material is not advisable. Instead, optimal pore geometry should be designed based on the desired operational conditions, and this work may serve as valuable guidance.

A Flexible Supercapacitor Based on Niobium Carbide MXene and Sodium Anthraquinone-2-Sulfonate Composite Electrode

MXene-based composites have been widely used in electric energy storage device. As a member of MXene, niobium carbide (Nb2C) is a good electrode candidate for energy storage because of its high specific surface area and electronic conductivity. However, a pure Nb2C MXene electrode exhibits limited supercapacitive performance due to its easy stacking. Herein, sodium anthraquinone-2-sulfonate (AQS) with high redox reactivity was employed as a tailor to enhance the accessibility of ions and electrolyte and enhance the capacitance performance of Nb2C MXene. The resulting Nb2C-AQS composite had three-dimensional porous layered structures. The supercapacitors (SCs) based on the Nb2C-AQS composite exhibited a considerably higher electrochemical capacitance (36.3 mF cm-2) than the pure Nb2C electrode (16.8 mF cm-2) at a scan rate of 20 mV s-1. The SCs also exhibited excellent flexibility as deduced from the almost unchanged capacitance values after being subjected to bending. A capacitance retention of 99.5% after 600 cycles was observed for the resulting SCs, indicating their good cycling stability. This work proposes a surface modification method for Nb2C MXene and facilitates the development of high-performance SCs.

Comparative Study on Supercapacitive Performances of Hierarchically Nanoporous Carbon Materials With Morphologies From Submicrosphere to Hexagonal Microprism

Hierarchically nanoporous carbon materials (HNCMs) with well-defined morphology and excellent electrochemical properties are promising in fabrication of energy storage devices. In this work, we made a comparative study on the supercapacitive performances of HNCMs with different morphologies. To this end, four types of HNCMs with well-defined morphologies including submicrospheres (HNCMs-S), hexagonal nanoplates (HNCMs-N), dumbbell-like particles (HNCMs-D), and hexagonal microprisms (HNCMs-P) were successfully synthesized by dual-template strategy. The relationship of structural-electrochemical property was revealed by comparing the electrochemical performances of these HNCMs-based electrodes using a three-electrode system. The results demonstrated that the HNCMs-S-based electrode exhibited the highest specific capacitance of 233.8 F g-1 at the current density of 1 A g-1 due to the large surface area and well-defined hierarchically nanoporous structure. Moreover, the as-prepared HNCMs were further fabricated into symmetrical supercapacitor devices (HNCMs-X//HNCMs-X) using KOH as the electrolyte and their supercapacitive performances were checked. Notably, the assembled HNCMs-S//HNCMs-S symmetric supercapacitors displayed superior supercapacitive performances including high specific capacitance of 55.5 F g-1 at 0.5 A g-1, good rate capability (retained 71.9% even at 20 A g-1), high energy density of 7.7 Wh kg-1 at a power density of 250 W kg-1, and excellent cycle stability after 10,000 cycles at 1 A g-1. These results further revealed the promising prospects of the prepared HNCMs-S for high-performance energy storage devices.

Novel mesoporous electrode materials for symmetric, asymmetric and hybrid supercapacitors

Electrochemical capacitors or supercapacitors have achieved great interest in the recent past due to their potential applications ranging from microelectronic devices to hybrid electric vehicles. Supercapacitors can provide high power densities but their inherently low energy density remains a great challenge. The high-performance supercapacitors utilize large electrode surface area for electrochemical double-layer capacitance and/or pseudocapacitance. To enhance the performance of supercapacitors, various strategies have been adopted such as electrode nanostructuring, hybrid electrode designs using nanocomposite electrodes and hybrid supercapacitor (HSC) configurations. Nanoarchitecturing of electrode-active materials is an effective way of enhancing the performance of supercapacitors as it increases the effective electrode surface area for enhanced electrode/electrolyte interaction. In this review, we focus on the recent developments in the novel electrode materials and various hybrid designs used in supercapacitors for obtaining high specific capacitance and energy density. A family of electrode-active materials including carbon nanomaterials, transition metal-oxides, transition metal-nitrides, transition metal-hydroxides, electronically conducting polymers, and their nanocomposites are discussed in detail. The HSC configurations for attaining enhanced supercapacitor performance as well as strategies to integrate with other microelectronic devices/wearable fabrics are also included.

Tetrahydroxy-anthraquinone induced structural change of zeolitic imidazolate frameworks for asymmetric supercapacitor electrode material application

Tetrahydroxyanthraquinone zeolitic frameworks having a Viburnum blossom-like structure with excellent electrochemical performance were prepared via a simple solvothermal method.

High-Performance Flexible In-Plane Micro-Supercapacitors Based on Vertically Aligned CuSe@Ni(OH)2 Hybrid Nanosheet Films

The orientation and hybridization of ultrathin two-dimensional (2D) nanostructures on interdigital electrodes is vital for developing high-performance flexible in-plane micro-supercapacitors (MSCs). Despite great progress has been achieved, integrating CuSe and Ni(OH)₂ nanosheets to generate advanced nanohybrids with oriented arrangement of each component and formation of porous frameworks remains a challenge, and their application for in-plane MSCs has not been explored. Herein, the vertically aligned CuSe@Ni(OH)₂ hybrid nanosheet films with hierarchical open channels are skillfully deposited on Au interdigital electrodes/polyethylene terephthalate substrate via a template-free sequential electrodeposition approach, and directly employed to construct in-plane MSCs by choosing polyvinyl alcohol-LiCl gel as both the separator and the solid electrolyte. Because of the unique geometrical structure and combination of intrinsically conductive CuSe and battery-type Ni(OH)₂ components, such hybrid nanosheet films can not only resolve the poor conductivity and re-stacking problems of Ni(OH)₂ nanosheets but also create the 3D electrons or ions transport pathway. Thus, the in-plane MSCs device fabricated by such hybrid nanosheet films exhibits high volumetric specific capacitance (38.9 F cm^-3). Moreover, its maximal energy and power density can reach 5.4 mW h cm^-3 and 833.2 mW cm^-3, superior to pure CuSe nanosheets, and most of reported carbon materials and metal hydroxides/oxides/sulfides based in-plane MSCs ones. Also, the hybrid nanosheet films device shows excellent cycling performance, good flexibility, and mechanical stability. This work may shed some light on optimizing 2D electrode materials and promote the development of flexible in-plane MSCs or other energy storage systems.